Related
***FIXED***
Update:
I was able to resolve this, here is what I've done in case others happen to have the same issue:
Turn on computer volume, reason being I had mine off and even though it appeared to skip over fastboot with the OTG method, it in fact was enabling for a sec or 2 then moving on as I could hear the USB connection chime.
NOTE: I had to press and hold to the LEFT of the Nvidia symbol until I heard the USB pick up chime, once I heard the chime I released my finger.
Prior to plugging in the power cord, I ran "fastboot boot <yourfilename.img>" and it sits at waiting for device...
Device took it and booted me into TWRP, I then flashed the Unofficial TWRP for the SATV, by choosing Image, then finding the .img that I already had on the internal storage
Rooted with SU, rebooted system and everything is now good to go.
Root, custom recovery and also Fastboot stock menu is back.
---------------------------------------------------------------------------------------------FIXED------------------------------------------------------------------------------------------------------------------
Hello All,
Long time lurker, now reaching out.
Just looking for a little help with my SATV Pro 500gb.
Here is the background:
Out of the box today, booted up and enabled ADB and jumped into fastboot for the bootloader unlock
Process took about 2 hours as the info said it would. Device rebooted, perfect working order.
Decided to flash TWRP for SU install along with possible custom roms, etc.
used this tool:
http://forum.xda-developers.com/shi...l-windroid-universal-android-toolkit-t3291266
Device said "please wait...." in fastboot screen, appeared finished and device rebooted into the the OS.
Here is the problem:
I go into command and adb reboot-bootloader, device reboots, I see the Nvidia logo and it boots into the OS, skips right over Fastboot
Shut it down, attempt the OTG, power cord ~3 secs over and over, hangs at logo and then boots in to the OS.
I reset the device, hoping the recovery OS would reflash the fastboot image, appears not to be the case.
Currently I am stuck with no fastboot access, device boots to OS no problems, but as far as fastboot is concerned I cannot access. Appears something went wrong with using that 1 click tool for flashing recovery.
Now before anyone chimes in, adb reboot-bootloader will not boot into fastboot and I've attempted the HW method listed on Nvidias dev site. Its 100% nogo.
Current State of device:
No fastboot
OS boots no problems
ADB works
No Root
Thanks for everyones look and help!
Okay, to start with, I've read the other threads about this. I understand the process that *should* work:
1. Power off.
2. Then, press and hold both all Volume Down + Power buttons at the same time until the LG Logo is being displayed on your LG V20.
3. Now, release the keys and press the above combination again however, this time you should wait until recovery mode menu is displayed.
...and I've tried the version where you keep holding the Volume Down button the entire time.
So, yes, I've reached the white screen where it asks you if you want to do a factory reset. I've hit "Yes" to both questions. The problem is that it really does a factory reset then.
---
After unlocking the bootloader, I installed TWRP via fastboot:
adb reboot bootloader
fastboot flash recovery twrp.img
fastboot reboot
...everything went fine.
But I can't get into recovery. And since I'm waiting to have TWRP working so that I can flash root, I can't boot into recovery via an app.
What did I do wrong?
EDIT:
Okay, it looks like TWRP isn't working properly. I tried "adb reboot recovery" and that got me to a dead Android icon and a "No command" message. I have no idea why TWRP isn't working.
Haphim said:
Okay, to start with, I've read the other threads about this. I understand the process that *should* work:
1. Power off.
2. Then, press and hold both all Volume Down + Power buttons at the same time until the LG Logo is being displayed on your LG V20.
3. Now, release the keys and press the above combination again however, this time you should wait until recovery mode menu is displayed.
...and I've tried the version where you keep holding the Volume Down button the entire time.
So, yes, I've reached the white screen where it asks you if you want to do a factory reset. I've hit "Yes" to both questions. The problem is that it really does a factory reset then.
---
After unlocking the bootloader, I installed TWRP via fastboot:
adb reboot bootloader
fastboot flash recovery twrp.img
fastboot reboot
...everything went fine.
But I can't get into recovery. And since I'm waiting to have TWRP working so that I can flash root, I can't boot into recovery via an app.
What did I do wrong?
EDIT:
Okay, it looks like TWRP isn't working properly. I tried "adb reboot recovery" and that got me to a dead Android icon and a "No command" message. I have no idea why TWRP isn't working.
Click to expand...
Click to collapse
to confirm, have you verified you are using the correct TWRP version for your V20?
in this step "fastboot flash recovery twrp.img" is your twrp image that you saved, named twrp.img? If its not, that command won't work correctly.
usually after I flash recovery, when still in the recovery menu, i choose reboot recovery just to make sure it did stick. If it reboots back to itself, then try rebooting the device, and again confirm with manually entering recovery. Maybe overkill but it works for me LOL.
Good luck!
I am in need of big help! I made a critical error after days of trying to navigate the minefields of rooting my device. I have a LG V20 h910 and it is no one-click wonder root. It made me work for it and I finally got it. I loaded LineageOS 14.1 and all was good until the USB OTG cable from my PS4 controller did not register anymore. Damn, that was a let down, and probably led to my careless move of needing to downgrade my TWRP, saw the version I needed, forgot these are device specific, and now I'm stuck in a hard place.
Perhaps the fix is easy, but I have not found the answer after many, many searches...
I had TWRP 3.2.1-2 and needed to downgrade to 3.2.1-0 to try SuperRom (hoping it would have OTG ability). I hastily grabbed the first TWRP 3.2.1-0, threw it on the SD card, wiped everything except internal storage, and flashed the img, and did a reboot. Road block went up.
I tried getting back into recovery, did the PWR and DOWN pressing combo and got the Factory Reset screen, but after clicking "Yes" to both, instead of getting the TWRP screen, I got this error screen (attached).
I tried another idea - hooked it up USB to my PC and tried accessing it via adb/fastboot. I tried multiple drivers for my device, but no adb and no fastboot devices were ever found. The only thing that almost worked was booting phone into FASTBOOT mode by holding DOWN btn and plugging in a USB cable attached to PC. Once in FASTBOOT mode, My PC at least saw the ID for fastboot device. I tried to flash TWRP via fastboot, and it looked like it would happen, but in the end there was no phone screen response to my attempt, and the cmd window on my PC would get stuck and just hang.
Can someone please advise me on how I can fix this problem?
I decided to update my old oneplus 2 to lineageos 15.1 with, but when I tried to flash the file with TWRP, it shows an error. Since the TWRP version I was using was old, I decided to update it first. Keep in mind at this point i had completely wiped my device. So, I downloaded the "twrp-3.2.1-0-kenzo.img" file, as per a youtube video where the dude managed to flash the update successfully, and gave it a go. It showed up as successful. Then i shut the whole device off, and tried to boot back in to recovery to flash the ROM again, but the thing won't boot. It's stuck on this boot screen (with the oneplus logo and 'powered by android' at the bottom), and refuses to go further. I'm stuck in a situation with the phone having no OS, no recovery and the thing won't show up when I connect it to the pc either. Well, the pc makes the 'device connected' notification sound when I plug it in, but nothing shows up on the file explorer or the device manager.
That's my dilemma, please i need help!
Thanks in advance.
inwarse said:
I decided to update my old oneplus 2 to lineageos 15.1 with, but when I tried to flash the file with TWRP, it shows an error. Since the TWRP version I was using was old, I decided to update it first. Keep in mind at this point i had completely wiped my device. So, I downloaded the "twrp-3.2.1-0-kenzo.img" file, as per a youtube video where the dude managed to flash the update successfully, and gave it a go. It showed up as successful. Then i shut the whole device off, and tried to boot back in to recovery to flash the ROM again, but the thing won't boot. It's stuck on this boot screen (with the oneplus logo and 'powered by android' at the bottom), and refuses to go further. I'm stuck in a situation with the phone having no OS, no recovery and the thing won't show up when I connect it to the pc either. Well, the pc makes the 'device connected' notification sound when I plug it in, but nothing shows up on the file explorer or the device manager.
That's my dilemma, please i need help!
Thanks in advance.
Click to expand...
Click to collapse
You downloaded the KENZO (this is not oneplus2! ) TWRP and flashed it on another phone (oneplus2), just normal that it doesn't work and your phone is messed up.
If you can enter fastboot (vol up and power button to boot) you can rescue your phone:
-enter fastboot (vol up + power, while phone is completely off, u can also hold it until you can see "fastboot" written on the screen)
-connect device to a computer with fastboot installed
-type "fastboot oem unlock" into a terminal/cmd window if there is no error, you are good to go, otherwise your bootloader relocked, use this thread to recover
-if your bootloader is still unlocked, download the ONEPLUS2 TWRP IMG, ALWAYS make sure to only flash the roms, kernels, recoveries or zips for YOUR phone otherwise you can really DESTROY your phone!
-now type into terminal/cmd: "fastboot flash recovery *drag the oneplus2 twrp image into terminal/cmd window* and hit enter
-use vol down + power to reboot phone into recovery and wipe all partitions
-Install a ONEPLUS2 ROM of your choice
If something is not clear, use google, because this is most likely basic stuff you have to know when flashing your phone
I can in fact go to fastboot mode by holding the power+volume up keys. When I the phone to my pc it does show a fastboot device (9597b869 fastboot). What do i do from here?
inwarse said:
I can in fact go to fastboot mode by holding the power+volume up keys. When I the phone to my pc it does show a fastboot device (9597b869 fastboot). What do i do from here?
Click to expand...
Click to collapse
As I wrote above (it's a step-by-step guide, u only have to READ )
-connect device to a computer with fastboot installed
-type "fastboot oem unlock" into a terminal/cmd window if there is no error, you are good to go, otherwise your bootloader relocked, use this thread to recover
-if your bootloader is still unlocked, download the ONEPLUS2 TWRP IMG, ALWAYS make sure to only flash the roms, kernels, recoveries or zips for YOUR phone otherwise you can really DESTROY your phone!
-now type into terminal/cmd: "fastboot flash recovery *drag the oneplus2 twrp image into terminal/cmd window* and hit enter
-use vol down + power to reboot phone into recovery and wipe all partitions
-Install a ONEPLUS2 ROM of your choice
wertus33333 said:
As I wrote above (it's a step-by-step guide, u only have to READ )
-connect device to a computer with fastboot installed
-type "fastboot oem unlock" into a terminal/cmd window if there is no error, you are good to go, otherwise your bootloader relocked, use this thread to recover
-if your bootloader is still unlocked, download the ONEPLUS2 TWRP IMG, ALWAYS make sure to only flash the roms, kernels, recoveries or zips for YOUR phone otherwise you can really DESTROY your phone!
-now type into terminal/cmd: "fastboot flash recovery *drag the oneplus2 twrp image into terminal/cmd window* and hit enter
-use vol down + power to reboot phone into recovery and wipe all partitions
-Install a ONEPLUS2 ROM of your choice
Click to expand...
Click to collapse
i tried to follow the guide. but the bootloader, as per you description is relocked. the download link for the driver you provided shows up as empty/no longer available. that's where i'm getting stuck.
P.S, i can enter fastboot mode on the phone via power+volume up.
thanks for the help so far, i can't seem to find much help other than from you so far
Oh, the link is dead, sry for that. try this one (GDrive links are up and working).
inwarse said:
i tried to follow the guide. but the bootloader, as per you description is relocked. the download link for the driver you provided shows up as empty/no longer available. that's where i'm getting stuck.
P.S, i can enter fastboot mode on the phone via power+volume up.
thanks for the help so far, i can't seem to find much help other than from you so far
Click to expand...
Click to collapse
so i managed to get into qualcomm mode, updated the drivers, and ran "MSM8994DownloadTool.exe" in administrator mode. it went as it's outlined in your guide. however, at the end of that process, the phone got stuck in a bootloop (the oneplus logo flashes for a moment and restarts). and can't get into qualcomm mode now, since when i connect the usb to the pc while the phone off, it lights the display (to show that it's charging, i think). any way back from this?
(i can still get into fastboot mode)
inwarse said:
so i managed to get into qualcomm mode, updated the drivers, and ran "MSM8994DownloadTool.exe" in administrator mode. it went as it's outlined in your guide. however, at the end of that process, the phone got stuck in a bootloop (the oneplus logo flashes for a moment and restarts). and can't get into qualcomm mode now, since when i connect the usb to the pc while the phone off, it lights the display (to show that it's charging, i think). any way back from this?
(i can still get into fastboot mode)
Click to expand...
Click to collapse
Do you still have TWRP? If yes go to TWRP and shut down the phone there, afterwards you should be able to enter qualcomm mode again.
otherwise you have to try (i think 10s power button will shut the device completely down). You should be able to enter qualcomm mode if the device is fully shut off (your scenario sounds as if the device is not fully shut off when u connect it to the pc).
Just to go sure: You are absolutely sure to have a oneplus2, are you?
inwarse said:
so i managed to get into qualcomm mode, updated the drivers, and ran "MSM8994DownloadTool.exe" in administrator mode. it went as it's outlined in your guide. however, at the end of that process, the phone got stuck in a bootloop (the oneplus logo flashes for a moment and restarts). and can't get into qualcomm mode now, since when i connect the usb to the pc while the phone off, it lights the display (to show that it's charging, i think). any way back from this?
(i can still get into fastboot mode)
Click to expand...
Click to collapse
Could you resolve the issue?
wertus33333 said:
Could you resolve the issue?
Click to expand...
Click to collapse
nope. kept running into issue after issue, so got dejected and gave up.
I have unlocked my phone, hoping to find a fix to USB external camera not being recognized. As a consequence, I am not able to update my system through OTA. Moreover, I am no longer able to enter fastboot mode. Whatever key combination I tried, my phone will do a normal boot. When I power up or I press volume - I only end up doing a normal boot or powering off. If I press all 3 keys together I get into the e-recovery boot, which fails. I have only been able to boot into TWRP after downloading a system update and choosing to install it. With this procedure, the update will not be installed, but I will boot into TWRP. From here, if I choose recovery, I do boot into fastboot, but my fastboot is not recognized by my computer, as it was before. Running either ADB or Fastboot will not reveal any device connected.
pieemme said:
I have unlocked my phone, hoping to find a fix to USB external camera not being recognized. As a consequence, I am not able to update my system through OTA. Moreover, I am no longer able to enter fastboot mode. Whatever key combination I tried, my phone will do a normal boot. When I power up or I press volume - I only end up doing a normal boot or powering off. If I press all 3 keys together I get into the e-recovery boot, which fails. I have only been able to boot into TWRP after downloading a system update and choosing to install it. With this procedure, the update will not be installed, but I will boot into TWRP. From here, if I choose recovery, I do boot into fastboot, but my fastboot is not recognized by my computer, as it was before. Running either ADB or Fastboot will not reveal any device connected.
Click to expand...
Click to collapse
When you use key combinations, you must shutdown your phone first, not reboot or you can boot into system, make sure that usb debugging is turned on, open adb and type "adb reboot bootloader".
DeathBell said:
When you use key combinations, you must shutdown your phone first, not reboot or you can boot into system, make sure that usb debugging is turned on, open adb and type "adb reboot bootloader".
Click to expand...
Click to collapse
Thanks, I followed your instructions but with no success. As soon as I plug into USB it will power on and go on with a normal system boot, no matter how quick I am in typing the command "adb reboot bootloader", which invariably returns "no devices/emulators found", or whether I press the volume - button or not. This also happens when I am in the charging screen (not sure whether this also equals power off).
pieemme said:
Thanks, I followed your instructions but with no success. As soon as I plug into USB it will power on and go on with a normal system boot, no matter how quick I am in typing the command "adb reboot bootloader", which invariably returns "no devices/emulators found", or whether I press the volume - button or not. This also happens when I am in the charging screen (not sure whether this also equals power off).
Click to expand...
Click to collapse
No, you need to boot to Android to use adb.
Is your device bricked or stuck in a bootloop or something?
DeathBell said:
No, you need to boot to Android to use adb.
Is your device bricked or stuck in a bootloop or something?
Click to expand...
Click to collapse
I wouldn’t call it properly bricked, inasmuch as it is actually doing its job. However, It does some strange things: it gets the OTA updates, but when I click on Download and Install, it restarts in the TWRP menu (which I cannot otherwise access. I have 2 TWRP apps installed, which don’t seem to be of any use: official TWRP App and TWRP Manager). When I am in the TWRP menu, I can choose to restart in the bootloader. However, once there, with the green window telling me that my phone is flashed, the phone is still not detected by ADB or Fastboot commands. I don’t know when the bootloader started to be unaccessible because I left the tinkering a couple of months ago, when I realized that nobody so far has had any success in getting a P10 Lite to work with a USB Endoscope.
pieemme said:
I wouldn’t call it properly bricked, inasmuch as it is actually doing its job. However, It does some strange things: it gets the OTA updates, but when I click on Download and Install, it restarts in the TWRP menu (which I cannot otherwise access. I have 2 TWRP apps installed, which don’t seem to be of any use: official TWRP App and TWRP Manager). When I am in the TWRP menu, I can choose to restart in the bootloader. However, once there, with the green window telling me that my phone is flashed, the phone is still not detected by ADB or Fastboot commands. I don’t know when the bootloader started to be unaccessible because I left the tinkering a couple of months ago, when I realized that nobody so far has had any success in getting a P10 Lite to work with a USB Endoscope.
Click to expand...
Click to collapse
Thats normal behaviour, when you have a custom recovery installed and do anything in the stock recovery then it boots you into the custom recovery, it should also boot to TWRP when you do factory reset in the stock recovery. And when your phone isn't detected by fastboot then its probably a adb and fastboot installation issue on your PC, type "fastboot devices" to see if it detects your device. And what do you even want to do in fastboot?
Also are you in Nougat or Oreo?
DeathBell said:
Thats normal behaviour, when you have a custom recovery installed and do anything in the stock recovery then it boots you into the custom recovery, it should also boot to TWRP when you do factory reset in the stock recovery. And when your phone isn't detected by fastboot then its probably a adb and fastboot installation issue on your PC, type "fastboot devices" to see if it detects your device. And what do you even want to do in fastboot?
Also are you in Nougat or Oreo?
Click to expand...
Click to collapse
I am not too sure to have any working recovery at all, right now. If I press all 3 buttons, I get into the Huawei recovery mode, which fails. I am on EMUI 5.1.1 (Nougat) and would like to install a stock recovery to Oreo. If I am able to get to a working bootloader mode, I would like to install this file which seems to be a stock recovery with Oreo (WARSAW L21C432B182_EU_SERVICE_ANDROIDHOST.RU.RAR). Otherwise, I will buy a MicroSD card reader and try copying this installation to the card, which, according to this video (https://www.youtube.com/watch?v=0vDgDXePAR4&feature=youtu.be) should be the last resort, if everything else fails. I would be perfectly happy to return to a working and updated standard EMUI. I'm told that if I installed the OTA version this would not be working correctly on my my phone. According to an app called Rootchecker, my phone is not properly rooted either, but there are a lot of crappy apps out there, so I don't know what to believe.
BTW: I don't believe there is any problem with my adb fastboot installation (on MacOS). It was working earlier on. When I type "fastboot devices", it returns: "waiting for any device"
pieemme said:
I am not too sure to have any working recovery at all, right now. If I press all 3 buttons, I get into the Huawei recovery mode, which fails. I am on EMUI 5.1.1 (Nougat) and would like to install a stock recovery to Oreo. If I am able to get to a working bootloader mode, I would like to install this file which seems to be a stock recovery with Oreo (WARSAW L21C432B182_EU_SERVICE_ANDROIDHOST.RU.RAR). Otherwise, I will buy a MicroSD card reader and try copying this installation to the card, which, according to this video (https://www.youtube.com/watch?v=0vDgDXePAR4&feature=youtu.be) should be the last resort, if everything else fails. I would be perfectly happy to return to a working and updated standard EMUI. I'm told that if I installed the OTA version this would not be working correctly on my my phone. According to an app called Rootchecker, my phone is not properly rooted either, but there are a lot of crappy apps out there, so I don't know what to believe.
BTW: I don't believe there is any problem with my adb fastboot installation (on MacOS). It was working earlier on. When I type "fastboot devices", it returns: "waiting for any device"
Click to expand...
Click to collapse
I still can't uderstand you. Can you boot into Android or not? And Does TWRP work? When you device is softbricked, what did you do to brick it?
At one point you say that you can access fastboot by choosing reboot to bootloader in TWRP and then you say that you have no working recovery at all.
Anyway I can't help you with the fastboot thing then and that file isn't Oreo it's an old version of Nougat, B360 and up is Oreo and also B321 witch is Oreo Beta. You can only flash image files in fastboot anyway as that file needs to be unpacked and put on the dload folder on your sd card.
When you want to get to Oreo you can either use service roms from this thread https://forum.xda-developers.com/p10-lite/development/service-rom-b362-c432-upgrade-o-o-n-o-t3813946, you need to copy the two zip files into the dload folder in your SD card. You can also use HWOTA but that wouldn't work since fastboot isn't working for whatever reason. Or when your custom recovery is working you can use HuRUpdater. But you need to be on the newest version of Nougat B210 or B209 to update as otherwise you may brick your phone.
Several months back I encountered the error "E:[liblp]Logical partition metadata has invalid geometry magic signature." when trying to apply updates. I've been unable to apply updates since that time, which has concerned me.
Yesterday I noticed the release notes for a multiple month old release of Lineage Recovery stated the "Logical partition metadata has invalid geometry magic signature." error had been fixed. It made reference to returning to stock to upgrade.
Last evening I downloaded the stock rom for this device and installed it using ODIN. All is well.
I would like to put both LineageOS and Lineage Recovery back on the device. Unfortunately, I can't enter Fastboot. When I use either the key combinations or "adb reboot bootloader" I see the text "Entering Fastboot..." on the display of the device, but nothing more. I've let the device sit for about five minutes without any change. It's definitely not in fastboot because "fastboot devices" shows nothing. "adb devices" shows the device when it's in recovery, I just can't enter fastboot.
Has anyone seen this problem? I've tried wiping cache and system using the Samsung Recovery (which overwrote LineageOS Recovery when I installed the stock rom) without any improvement.
Thanks,
Bob
I've got the same issue. Anyone can help here.?
You are NOT supposed to ever use adb reboot fastboot. EVER! Always use ODIN mode.
If I remember correctly, do Samsung devices even have fastboot?
They don't but Samsung added a what's basically a dummy version of fastboot that does nothing.
Try using the key combowith the tablet connected to your PC. That got me in recovery mode and from there you should be able to go into fastboot.
The whole point is not to use fastboot LMAO, because fastboot on modern Sammy devices is just a dummy version.