I have been searching here and Google to find the usb drivers for my TB-8504F with no luck. Does anyone have them or know where I can get them? Did find one site I could dowload but they wanted credit card info, not sure I want to do that.
Any help appreciated!!
Did you find them?
Related
Hi,
Have anyone tried installing drivers for USB devices on O2 flame, like USB to serial converter etc. I was trying to do this and it fails. I want to use my USB to serial converter to connect to the Flame's OTG port. I tried to install the FTDI driver according to the procedure given. but O2 flame does'nt allow to install any driver. I am really . Trying this for quite a long time.
Anyone had a success in doing this, will appreciate your help.
Best regards,
Manas.
Can you give us a link to your drivers. Without that we will not be able to help you.
thierryb said:
Can you give us a link to your drivers. Without that we will not be able to help you.
Click to expand...
Click to collapse
I downloaded the driver from this link http://www.ftdichip.com/Drivers/VCP.htm
Its not only this driver. In the process to evaluate if the Flame supports installation of new USB driver. I found that it is not allowing. Not even the DLLMain is called.
Done. This is not that easy to though.
how? really intrested... trying to install on toshiba g900
Install a USB driver on Flame
Sorry I was not in touch with this forum for a long time.
For this the first step is to do the registry setting correctly:
HKLM/DRIVERS/USB/LOADCLIENTS
HKLM/DRIVERS/USB/...
Dont forget to mention the index and the prefix values.
the dll must be placed in the /windows folder
Important: Build the driver project with the windows ce version 4.2.
Hi
Had my laptop stolen so I have to download new USB drivers for transferring stuff from my phone, unfortunately the CD was in my laptop case.
Does anyone know if there is a download on this site or anywhere else that I could access, would be much appreciated.
Pete
Maybe here:
http://forum.xda-developers.com/showthread.php?t=524619
When i try to connect my nook to my computer it wants me to put in disk that came with nook. i dont know if its because i have refurbished nook is why i dont have the disk, but nevertheless i dont and my computer cant find any drivers to install. i dont know what to do. any suggestions would be greatly appreciated. thanks
purpleurkle said:
When i try to connect my nook to my computer it wants me to put in disk that came with nook. i dont know if its because i have refurbished nook is why i dont have the disk, but nevertheless i dont and my computer cant find any drivers to install. i dont know what to do. any suggestions would be greatly appreciated. thanks
Click to expand...
Click to collapse
Turn off USB debugging. It is searching for adb drivers.
Ok, thanks so much leapinlar. I really appreciate your help. I have really learned alot from your threads and anytime I can't figure something out, 9 times out of 10 its you that points me in the right direction. Thanks again
Sent from my NookColor using xda premium
Hi, I hope someone can help me. I have the following error at boot and the tablet stops at this error: Boot Verified Failed...
Short story is that I have spent the last two weeks trying to correct this error. No matter what I do I can not get past the first step in anything recommended on this site which is to connect to a PC. For some reason I can not get the tablet to connect at all, more specifically I can not get the PC to acknowledge it is connected. I am using the micro usb slot on the tablet. I have tried all the acer drivers, 4 operating systems including ubuntu, win xp, win 7 and win 8 and all of this on two different computers to be sure that it wasn't the PC being the problem.
Could someone help me how to figure out what I am doing wrong or what I am not doing right? Or does this tablet error mean that the tablet will never talk to a PC. I have tried APX mode as well as various combinations as per recommendations on this forum with the rocker, power and reset.
Hopefully someone can help me.
Thanks a billion in advance.
So it doesn't look like anyone can help me with this problem but perhaps someone can help me with getting a schematic of the inside of the tablet so I can perhaps fix the micro usb port myself unless someone knows another reason why I can't get it to work. I really need some help, hopefully someone can help me.
Sylgrant said:
So it doesn't look like anyone can help me with this problem but perhaps someone can help me with getting a schematic of the inside of the tablet so I can perhaps fix the micro usb port myself unless someone knows another reason why I can't get it to work. I really need some help, hopefully someone can help me.
Click to expand...
Click to collapse
Strange problem and one I've not heard of before.
First try a different usb cable, they are not created equal these things!
Ensure usb debug. is enabled in Settings.
Connect yr tab to yr pc. Open device manager and check the android usb device driver is installed. If it has you should be good to go.
If it doesn't. ..head to the cpuid guide in my sig. There's a whole section near the end which deals with driver issues and how to set up and test adb etc.
I do have a schematic somewhere, got it
off here so try a search.
Oh, one other thing. ..u didn't mention adb drivers. U can download them from the cpuid guide.
Good luck
dibb
Sent from my GT-I9300 using Tapatalk 2
Hello all!
I just aquired a Find 5 and found it to be Rooted with PacRom installed. When I plugged it into my Windows 8 PC via the OEM cable, I couldn't get it to be recognized. I've downloaded drivers from Oppo and tried a few other suggestions in the Find 5 section here, but I can't seem to get the two to talk to each other. Does anyone have any instructions or help for me to get a connection? I'm at my wits end here.
Thanks in advance!
Update: Okay, it will acknowledge that it's present when I go into "Control Pannel>Device Manager", but I still can't transfer any files to or from it. What's the remaining piece of the puzzle I'm missing?
WA_Bob said:
Hello all!
I just aquired a Find 5 and found it to be Rooted with PacRom installed. When I plugged it into my Windows 8 PC via the OEM cable, I couldn't get it to be recognized. I've downloaded drivers from Oppo and tried a few other suggestions in the Find 5 section here, but I can't seem to get the two to talk to each other. Does anyone have any instructions or help for me to get a connection? I'm at my wits end here.
Thanks in advance!
Update: Okay, it will acknowledge that it's present when I go into "Control Pannel>Device Manager", but I still can't transfer any files to or from it. What's the remaining piece of the puzzle I'm missing?
Click to expand...
Click to collapse
I had the same problem and the solution for me was to download the Google driver with its SDK Manager and install manually the drivers from the Device Manager window... but I'm on a Windows 7!!!
Iksos84 said:
I had the same problem and the solution for me was to download the Google driver with its SDK Manager and install manually the drivers from the Device Manager window... but I'm on a Windows 7!!!
Click to expand...
Click to collapse
Well, I shall give it a shot. The worst that can happen is it doesn't work. Thanks for the info! :good:
Forgot to update - Everything is working great now! :highfive: