Hello everyone,
I have a Moto G5 Plus wih the 7.13 custom ROM "crDroid" Link flashed as well as TWRP 3.5.2 and the latest Magisk software installed.
I am now stuck on either the crDroid logo showing on booting to OS or the TWRP logo showing on booting to recovery mode. I can enter the bootloader menu just fine.
My question is: how can i enter recovery mode again? Because without entering recovery mode i cannot reset my device...
I tried to connect it via USB, but adb does not detect the device. Neither does fastboot. And I cannot enable USB Debugging, because I cannot get into the OS.
I can also not enter Factory Mode, as it justs boots the OS with only the logo showing.
Context: I restarted my device this morning and since then I needed to restart it several times, because the Android UI would get stuck. I did this 3 times and since then I am stuck on the logos as described above.
Any help is much appreciated!
Related
I was on 4.4.4 stock with bootloader unlocked. I flashed custom recovery from fastboot and rebooted into CWM. It was all fine till this point. On next reboot, It booted in OS all fine. I did adb reboot recovery and it got stuck at "No command" screen. waiting a long time ons creen it booted into OS.
I reboot into fastboot to reflash CWM and check but it wont detect my device in fastboot devices. I'm on OS x. I even tried windows (drivers installed) , its the same. fastboot is stuck at "waiting for device".
ps. I installed "recovery-clockwork-touch-6.0.1.6-manta-Wfix-by-damien667.img" from downloadandroidrom.com
Have you tried turning off the tablet, then booting by simultaneously holding the power, volume up and volume down buttons? This is the manual way to boot into CWM. After you are in cwm you should be able to reflash or just reboot into the OS.
uDude
The stock-Recovery is reflashed when you reboot to Stock OS, you have to disable that.
Guys I need urgent Help
Recently I was running AOSP based ROM and tried to flash RR ROM based on Android 5.1.1.
I was not being flashed and was giving error so I dont remember which bootloader or file I flashed to make RR Rom flashing possible.
Then I flashed Gapps and wiped Cache and Delvik and restarted the cell.
After Restart, it was stuck on bootloop. One thing not to forget, It remains stuck on bootloop for several times and finally boots up, and the first screen comes is Android upgrade that works on 96 apps. As soon as upgrade completes, it reboots and remains stuck on bootloop.
If i try to enter into recovery, it takes me to fastboot mode where blackscreen with like commands stating fastboot is displayed.
If i press the volume button up and plug in the cable while connected to Laptop, Download mode starts but Laptop doesn't detect any device.
On the other hand, if started in fastboot mode, ADB device is detected.
I have tried to install LG Drivers, Verizon Drivers and also universal ADB drivers but nothing has worked so far.
The device is not detected at all.
I have windows 10, also tried on windows 8.1 but same issue.
Even tried disabling Driver Signature enforce or updating system but still same issue.
Anyone who could be able to help will highly be appreciated.
Hello!
I just repaired the display of my OP2 and when turning it back on it went straight into bootloop. Only showed the OP Logo and android on the bottom. ADB obviously doesnt work and tried to all partitions via fastboot to get fresh start. After completely resetting I unlocked the bootloader again just to be sure. Then I tried to flash twrp 3.2.1-0. it say dtb not found error. I tried a twrp 3.0.0-0 and it said succesfully flashed but after automatically rebooting the screen just turns black. I can the into fastboot mode or into bootloop can't do anything else. I also tried the MSM8994DownloadTool.exe but it just returns into bootloop again or turns black.
Help pls
Hi,
I have been using my P Smart (FIG-LX1) for a while with LineageOS 16 and decided to move on to Android 10. Installed LineageOS 17.1 (found it on this forum) and pph-Magisk 20.3 for root - it did work, but the system was unstable so i decided to try AOSP 10.0 instead. I entered TWRP, wiped cache,dalvik,system and data, flashed the ROM, gapps etc. It was advised to now flash stock recovery and use it to do a factory reset - and now i'm stuck here.
After flashing the recovery_ramdisk img the phone stopped being able to enter any recovery at all. The system itself does not boot (stuck on the "Your device has been unlocked (...) Your device is booting now..." screen forever), the recovery never appears (previously in the start screen with 'unlocked device' warning it used to suggest pressing volume UP to enter recovery, now it only shows "Your device is booting now"). As i can still access fastboot, I tried flashing TWRP again - the TWRP splash screen does appear, but the phone gets stuck on it. Also tried flashing another system's img - nothing changed.
Is there anything I can do or did i just brick it completely?
Thanks for help!
SOLVED:
Apparently running fastboot erase on system and userdata partitions made me able to boot into recovery/erecovery again. I do have another problem now, but it's not connected with this one so I will create another thread for that.
Could you try help me? I can't even get ADB to work anymore
So I was installing twrp and everything went right until it didnt boot to the recovery and from then it keeps booting to lg logo and bootloader warning forever.
I know I can install the stock rom with lg up by I cannot enter download mode since the phone isnt technically turned off. Does anyoene have a solution.
It's my main phone and I literally cannot afford a phone right now.
A way to turn it off would be the solution. Battery was around 70% so it will take a long time to actually have 0%.
Update: I got to the fasboot menu from where I can run fastboot reboot recovery after installing twrp again. Now I have some mounting issues and I cannot flash any zip without entering bootloop. Im trying to use the shut down menu of twrp to try to enter download mode.
2nd Update: solved using lg up with the latest android version.