Database Users

[q] help: Mms, internet, nav, on flashed evo

OK, I bought a Evo Flashed to Metro PCS from someone. I simply did *228 and was able to activate the phone. When you activate like this, you wont get MMS and Internet working, just talk and text. Can i get this working myself? IF so what steps do I take?

wow thanks for the help

Metro pcs flashing hope this helps
rwalkerfla said:
OK, I bought a Evo Flashed to Metro PCS from someone. I simply did *228 and was able to activate the phone. When you activate like this, you wont get MMS and Internet working, just talk and text. Can i get this working myself? IF so what steps do I take?
Click to expand...
Click to collapse
1. Make sure you have all the drivers need for the phone.
USB Drivers Download
USB Drivers for rooting
DIAG Driver Download
64bit drivers
32bit drivers
2. Make sure your phone is rooted
2.3.3 root click here
revolutionary.io
Please make sure to insert the beta key at it before installing it.
Beta key will appear once you click the download button.
2.2 root click here
3. Once successfully rooted next step is to download the software needed. I will add links as they are needed.
4. Ok before this flashing process starts you have to get call and text on your phone. One way is to go to a corporate metro store and second one you know those who need second way.
5. Assuming that you have your phone rooted you need to download this rom and then copy it to root of your sdcard.
Download Custom MetroPCS ROM here
6. Install above rom from recovery. To get to recovery mode turn off your evo. Press and hold the volume down key and press the power key. From the hboot menu using volume key goto recovery and press the power key. You should be in recovery menu. click wipe data and also click wipe cache. Click install zip from sdcard and look for file you copied to sdcard.
After installation is done reboot the phone, first boot will take longer time.
Download and install this app MslReader. Easy way is to copy it to sdcard and then using astro file manager install it.
Once installed open the app on your phone and read your MSL Code.
7. Install QPST (Click here to download) and install it.
Follow it to get the internet fixed
1. Go to your phones dialer and dial ##3424#
2. Plug in your phone to the computer
3. Go To Device Manager and there should be a unknown device
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
4. Right Click on The unknown device and Click on Update Driver Software
5. Click on the 2nd Option
6. Browse to the folder where you downloaded the drivers
7. Let It Install
8. Once It Installs, depending If Your system is 32 Bit Windows xp through 7 or Windows Vista or 7 64 Bit the place where you'll see the port will be different.
For 32 Bit, In Device Manager Check under communication Port and you'll see
the port for your device
For 64 bit, In Device Manager check under Modems and right click on the HTC Modem and go to properties. Go to the modem tab and you'll see your port there
1. Now Open Up QPST Configuration
2. Click On Add New Port
3. Uncheck the box that says Show Serial etc etc
4. This is what it should look like after you add port
5. Go To Start Clients and click on Service Programming
6. This will pop up just hit ok
7. This Is the next window that will come up
8. Click on Read from Phone and enter your SPC Code (This was the code found in the MSL Reader app, usually its 000000)
9. Once it reads the contents from your phone, there will be a check box on the right side that says SPC Change Available. Check the box and change your the area that says Service Programing to 6 Zero's. Don't hit write just yet
10. Go to roam tab click browse and choose metro prl.
11. Go To the Display Tab and Change It To MetroPCS
12. Go To The M.I.P. Tab and copy the settings in my picture and be sure to set it to SIMPLE IP! Right now its set to MOB+Simple IP on stock HTC Phones
13. Now Click on the profile 0 and hit edit
Copy all the settings that are displayed in my picture. In NAI and Tethered NAI type (Your10DigitPhone#)@mymetropcs.com. In HA Shared Secret and AAA Shared Secret click on enter text string and type "metropcs" without the quotes in lowercase.
14. Now do the exact same thing for Profile 1.
15. Go To the PPP Config Tab Now and copy all the settings displayed in the Screenshots
16. Still while in the PPP Config Tab go to UM Section and copy the settings exactly
Now for Tethered Nai and User ID type in your
(your10digitPhone#)@mymetropcs.com
For you password go to this website and type in your MEID or ESN in the box labeled "Calculate." Once you calculate your password(it will be called MetroPCS MSL) enter into your password box. You may find this on the top of QPST Service programming window. If you look at the pictures its the numbers located on top that are blurred out.
17. One You Have finished in the UM Section of the PPP Config tab go to the AN Tab copy the setting listed in the Screenshot.
This Time you cant enter anything in the tethered nai but in USER ID enter once again (your10digitphone#)@mymetropcs.com and the same MSL password you used before in the last tab.
18. One Finished Hit Write to Phone. Your phone will reboot after its done. If You Get an Error don't worry just ignore it and reboot your phone.

Call from Windows using Android phone

Background
Back in the day when every computer connecting to the internet was using a modem and dial-up link, you could also use the modem to dial from your computer to any phone number using dialer.exe. This was great because you didn't have to leave your keyboard and could use your pc speakers and microphone to make a call. This made me wondering if it would be possible to use my mobile phone (in my case the Samsung Galaxy Note II) to act as a modem to make phone calls. I have looked over some forums and managed to get this working. Since it took me a while, I made this thread so other people can replicate.
Before we begin
These steps were successful using:
Samsung Galaxy Note II (Android version: 4.4.2) and Windows 7 (64-bit)
Steps
Connect phone to pc as a modem
Install phone as a modem in Windows
Make a phone call
Step 1: Connect phone to pc as a modem
Enable Developer Options menu
On your phone go to "Settings", "More", "About phone".
Locate "Build number" and tab it a few times. You will get a notification that the Developer Options menu is enabled.
Enable USB debugging
On your phone go to "Settings", "More", "Developer Options"
Locate and enable "USB-debugging"
Enable USB to act as a modem
On your phone go to Phone and dial *#7284# (including the asterisk and hash). The Phone Util service mode will appear.
Under "USB" select "MODEM" and press "SAVE and RESET". Your phone will now reset.
Connect your phone to your pc using an USB cable
If your phone isn't already connected to your pc, now is the time...
Step 2: Install phone as a modem in Windows
I have used this thread to enable the modem under Windows: [REF][XMM] Infineon FlashTool & Comneon 7 CDCs Driver by E:V:A. This might also be helpful to install the drivers for other phones.
Detecting hardware
When your device has reset and is connected to your pc Windows will detect the new hardware, but will probably not find any drivers. There will be 7 CDC's listed as new hardware and one Comneon USB device.
Download drivers
The drivers for the Comneon modem can be found here: DRIVERS___WMC_comneon_3.33.0.exe - 694.68 KB
Or for the brave the direct download link: http://fs1.d-h.st/download/00111/55i/DRIVERS___WMC_comneon_3.33.0.exe
Install drivers
Install the drivers using administrative privileges. After installation the modem should be found and installed correctly. The following devices should be listed in Device Manager
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Step 3: Make a phone call
Phone and modem
In Windows go to Control Panel and search for "modem". Click on "Phone and Modem". If you haven't set a location before, add one now.
Go to tab "Modems", your device's modem should be located here. Select it and click "Properties". Go to the tab "Diagnostics" and click "Query Modem" if you get a response (e.g. not a blank response) your device's modem is correctly installed. Close all windows.
Phone Dialer
Press Start, Run (or Windows key + R) and start dialer.exe, located in the system32 directory: %windir%\system32\dialer.exe.
In Phone Dialer go to the "Tools" menu and select "Connect using".
Under "Line" select the modem we just installed. Click "Line Properties" and set the "Port speed" to "115200" (this step is not really required).
Now we are ready to make a call. Type in any Phone Number and the Phone Dialer will start the call. The "Call Status" will pop-up. Do not press any of the buttons unless you want to hang up.
Tips & Tricks
You still have to use the phone's speaker and mic to actually communicate. To use the computer's speakers and microphone I use a bluetooth dongle to let the computer act as a bluetooth headset for my phone. Not every bluetooth dongle is capable of this feature, you need one with a headset profile (HSP). The Konig Micro Bluetooth USB 4.0 Dongle has this profile and I use it to turn my pc into a headset.
You can also make calls from Windows using Outlook. Go to "Contacts" and right click any contact and select "Call". You can also make a phone call to any number by selecting "Call" under "More" in the ribbon of "Contacts".
Using Hyper Terminal it is also possible to receive incoming phone calls. You can connect to the COM port that is used by the modem (the used COM port is located in the properties of the modem). When connected to the COM port you can answer a call by typing the command ATA followed by Enter.
Final words
Any comments are greatly appreciated, since this is my first ever post. Also if you have similar successful implementations, feel free to comment so I can add these to the list. Thank you for reading and special thanks to E:V:A for submitting his useful post on where to find the modem drivers.

Great job... but it would have been easier to use speaker phone mode on the phone

Use MyPhoneExplorer...
You can call, sms, install apps, access data, call logs any many more...
No need to do any setting, just keep USB Debugging On....
You can even connect mobile wireless also thru wifi...

Nice work OP!
Another easy way to do this is to install MightyText. But then you're entrusting all your data to a third party.

Nice trick but a difficult one.

Did you ever ask yourself the question ... "But Why?"

[GUIDE] How to root Elephone P7000

Preparation:
1. Make sure that your computer installed a driver
(Download link here )
2. Flash tool (SP flash tool recommended, download link here )
Please be careful and make sure that you have enough knowledge or we suggest that don't root your phone casualy.
1. Download the file from below link. you're going to save to somewhere you can remember it, for this tutorial, I'm going to use my desktop.
Dnowload link here
2. Unzip the file that you have downloaded just now.
3. Cope zipe file named "superSU_PRO_V2.49.zip" to your SD card and then turn off the phone.
4. Open flash tool, Click "scatter-loading" and choose the file named "p7000-recovery" which you have just saved in your computer.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
5.Click download and then connect your phone with computer.
6. When you see a picture as below that means you have installed the third party recovery successfully.
7. Move out the battery and then put it back, press "power" + "VOL +" to enter recovery mode. ("VOL -" to choose, "power" to confirm)
http://bbs.elephone.hk/data/attachment/forum/201506/11/164351v74mw4840lullmwr.png
8. Choose "install zip" by pressing "VOL -" ,
9.Go to "choosezip from /sdcard"
10. Choose "superSU_PRO_V2.49.zip" , press "power" key to confirm.
11. Choose "yes-install superSU_PRO_V2.49.zip", press "power" key to confirm.
12. Congratulations!!! You have finished the whole process, now enjoy.

You can also root without flashing recovery.
1) Download and install SuperSU from Play Store, don't run it yet.
2) Enable USB Debugging and install ADB drivers.
3) Download this ZIP http://www37.zippyshare.com/v/SaH4NxFw/file.html , unzip to a folder and open command prompt in it.
4) Issue the following commands:
Code:
adb kill-server
adb root
adb connect localhost:5037
adb shell setenforce 0
adb shell mkdir -p /data/local/tmp/supersu/arm64
adb push su /data/local/tmp/supersu/arm64/
adb push supolicy /data/local/tmp/supersu/arm64/
adb push libsupol.so /data/local/tmp/supersu/arm64/
adb push update-binary-adb-arm64-v8a-21 /data/local/tmp/supersu/
adb shell chmod 0755 /data/local/tmp/supersu/update-binary-adb-arm64-v8a-21
adb shell /data/local/tmp/supersu/update-binary-adb-arm64-v8a-21
5) Don't reboot, run SuperSU, choose normal install, done.

Thanks

Thanks for all your work !

I followed all the directions and disabled the driver signature verification on my Windows 8.1 computer. I have a problem that when I plug in the phone to the computer (with the phone off) the computer recognizes it for a few seconds and then it does not anymore. I get the boopoopoop sound to incidate it is connected and the boopbum noise five seconds later indicating that it is off. Can anyone help?

GCbard said:
I followed all the directions and disabled the driver signature verification on my Windows 8.1 computer. I have a problem that when I plug in the phone to the computer (with the phone off) the computer recognizes it for a few seconds and then it does not anymore. I get the boopoopoop sound to incidate it is connected and the boopbum noise five seconds later indicating that it is off. Can anyone help?
Click to expand...
Click to collapse
If you can access adb (turn on debug mode in developer settings), then try my method above. No need to use preloader driver.

eLeKtriK EyE said:
If you can access adb (turn on debug mode in developer settings), then try my method above. No need to use preloader driver.
Click to expand...
Click to collapse
Thank you. I tried but the phone is not recognized as ADB. I have usb debugging checked and it still does not work. I even have all the drivers installed. Any suggestions?

Try with another computer, it must be windows 8 fault.

GCbard said:
Thank you. I tried but the phone is not recognized as ADB. I have usb debugging checked and it still does not work. I even have all the drivers installed. Any suggestions?
Click to expand...
Click to collapse
Download latest mtk droid tool's, i upload this some time's ago, this is Link.
https://mega.co.nz/#!2V9SRCRZ!xYn52zbVEfGze4zCyaUkfwStCUe0tt408IBpR-Tq-Fo
And here i add android commander. Try. For me working, but MTK DT no fully work

GCbard said:
I followed all the directions and disabled the driver signature verification on my Windows 8.1 computer. I have a problem that when I plug in the phone to the computer (with the phone off) the computer recognizes it for a few seconds and then it does not anymore. I get the boopoopoop sound to incidate it is connected and the boopbum noise five seconds later indicating that it is off. Can anyone help?
Click to expand...
Click to collapse
i had the same issues when i first tried flashing the device, some moderator in the eleforum stated that's normal for the phone to act like that, because it will just detect to flash for 1.5 sec and then jump into charging mode
do this steps and should work fine
1 - DO not connect the phone to the computer
2 - open the flash tool
3 - look for the scatter.txt file that you want to flash "either rom or recovery"
4 - click download on the top
5 - once the processes above have been done, connect the device and it will start the flashing process.
you are done.

TopoX84 said:
i had the same issues when i first tried flashing the device, some moderator in the eleforum stated that's normal for the phone to act like that, because it will just detect to flash for 1.5 sec and then jump into charging mode
do this steps and should work fine
1 - DO not connect the phone to the computer
2 - open the flash tool
3 - look for the scatter.txt file that you want to flash "either rom or recovery"
4 - click download on the top
5 - once the processes above have been done, connect the device and it will start the flashing process.
you are done.
Click to expand...
Click to collapse
Thanks! It worked.

I tried it , once I click download. I don't see it downloading anything. 0 b/s and -0 bytes.

TopoX84 said:
do this steps and should work fine (add : turn phone off)
1 - DO not connect the phone to the computer
2 - open the flash tool
3 - look for the scatter.txt file that you want to flash "either rom or recovery"
4 - click download on the top
5 - once the processes above have been done, connect the device trough usb cable (phone still off)
6- then turn it on and it will start the flashing process.
you are done.
Click to expand...
Click to collapse
Worked fine here (added some steps), did not install it from sd card as it is still in the old phone :
choosed install zip from last folder and then move to the folder where it is ( vol + /- to scroll down, power to validate). I put it on download folder (on the phone memory), but of course you can put it anywhere you want !
Very smooth install, thx for the great tutorial

Help me
Followed all your directions, when I click on download, nothing happens

yeah same here when I press "Download" nothing happens (Windows 8.1 x32)

If I use one of these methods to root my P7000, enable Link2SD and then unroot it, can I retain the Link2SD features?
I want to be able to install/move apps onto the SD card but I don't really want or need a rooted phone in the long term.

Re upload recovery:
adf . ly/1NoLAj
(without the spaces)

Hi, could you anybody please reupload files with CWM and Supersu.zip? The link doesn´t work
Edit: Sorry, the link is working, error in my browser

download link has broken. T_T

I've got " the load scatter file is invalid" is there any way to get through this problem? I've already tried different versions of SP flashtool still got the same. Files downloaded from Devblaze who reuploaded them! The first post's links don't work.

Windows 10 & ADB/Fastboot

Anyone here having issues on Windows 10 with ADB/Fastboot recognition?
I'm using the Android SDK Toolkit from the Google website, and I have both ADB and Fastboot installed. ADB recognizes the device, and started a shell on the device, everything is ok.
I reboot the device into fastboot mode, plug it into the same USB port where ADB was working, and nothing happens. It says "connect the usb cable". Frustrating as I'm looking to unlock the bootloader.
Tried rebooting from both MHP/PHP/Stock usb modes, which all opened an adb shell successfully, but fastboot mode is not recognized at all on the same usb port.
SOLVED see lower posts.

when you run the "adb devices" what does it show? If I had to guess it will show your device but say something about it being locked. I had to go into device manager, and manually switch my ADB device driver over to the correct one. I cant remember off of the top of my head which driver it was, but it took me nearly an hour to figure it out.

rodcpierce said:
when you run the "adb devices" what does it show? If I had to guess it will show your device but say something about it being locked. I had to go into device manager, and manually switch my ADB device driver over to the correct one. I cant remember off of the top of my head which driver it was, but it took me nearly an hour to figure it out.
Click to expand...
Click to collapse
List of devices attached
84BXXXXXXXXXX66 device
Looks like what I'm used to, as I said, adb shell works fine, I can change directory to system or whatever. Just doesn't recognize the device at all in fastboot mode.

hmmm, odd. Does it say "waiting for device" in adb when you are in the bootloader? Or is it telling you to plug in the USB on the bootloader screen (phone).
If the latter is the case, try and run your commands.

rodcpierce said:
hmmm, odd. Does it say "waiting for device" in adb when you are in the bootloader? Or is it telling you to plug in the USB on the bootloader screen (phone).
If the latter is the case, try and run your commands.
Click to expand...
Click to collapse
It's telling me to plug in the cord on the bootloader screen. "connect usb cable", I connect it. It still says "connect usb cable". However, in my device manager, I have an Android device that does not have a driver (Code 28).

go ahead and try and run your commands in ADB while on the bootloader screen.

rodcpierce said:
go ahead and try and run your commands in ADB while on the bootloader screen.
Click to expand...
Click to collapse
neither adb or fastboot commands work in bootloader mode on the same USB that ADB worked when phone was on.
The device is recognized in device manager (when in fastboot mode) but has no driver. Is it not the same usb driver responsible for ADB when device is on???

one second, let me plug mine in here quick and see which device driver is assigned.
---------- Post added at 02:06 AM ---------- Previous post was at 01:59 AM ----------
here is what mine shows up as. I was hoping it would show me the driver file. If you have a device with no driver, I would point it to the google universal USB driver. (i believe that is what I used)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

rodcpierce said:
one second, let me plug mine in here quick and see which device driver is assigned.
---------- Post added at 02:06 AM ---------- Previous post was at 01:59 AM ----------
here is what mine shows up as. I was hoping it would show me the driver file. If you have a device with no driver, I would point it to the google universal USB driver. (i believe that is what I used)
Click to expand...
Click to collapse
Solution to the problem was right click on "Android Phone" that was beside other "Unknown Devices" -> Update Driver Software -> Browse My Computer For Driver Software -> Let Me Pick From A List Of Devices -> (Since the Google SDK platform tools were installed, but not even full SDK, containined generic choices such as adb interface, bootloader interface, hawaii hdb interface etc.) -> Chose Android Bootloader Interface.
Phone now registers as Android Bootloader Interface under "Android Phone" in device manager. Strange since when phone is on it registers in a different category. Also strange, as phone still says "Connect USB Data Cable" as if it isn't connected to the laptop. But just performed "fastboot devices" and it is recognized by the computer for fastboot activities! So good enough for all intents and purposes.
When the phone is on, it appears as a ADB Interface under Universal Serial Bus devices. When the phone is in bootloader mode it appears as Android Bootloader under Android Phone (the new driver). ADB works when the phone is on, but ADB does not work in bootloader mode. Only fastboot works in bootloader mode.

Magnetox said:
Solution to the problem was right click on "Android Phone" that was beside other "Unknown Devices" -> Update Driver Software -> Browse My Computer For Driver Software -> Let Me Pick From A List Of Devices -> (Since the Google SDK platform tools were installed, but not even full SDK, containined generic choices such as adb interface, bootloader interface, hawaii hdb interface etc.) -> Chose Android Bootloader Interface.
Phone now registers as Android Bootloader Interface under "Android Phone" in device manager. Strange since when phone is on it registers in a different category. Also strange, as phone still says "Connect USB Data Cable" as if it isn't connected to the laptop. But just performed "fastboot devices" and it is recognized by the computer for fastboot activities! So good enough for all intents and purposes.
Click to expand...
Click to collapse
yeah, I had to do something similar. I couldnt remember the exact steps. But took me forever to figure it out!
Sorry I wasnt more help my friend.

rodcpierce said:
yeah, I had to do something similar. I couldnt remember the exact steps. But took me forever to figure it out!
Sorry I wasnt more help my friend.
Click to expand...
Click to collapse
No, thank you! Glad the post is here for others now.

Ok. I runned into all of this issues. I finally discovered that after you went into recovery, the device was being installed as a kedacom USB device. So I researched a little and found the solution in the link below.
Short solution:
Right click on "Start Button" and select Device Manager
Find Kedacom, drilldown and right click to update driver
Browser Computer
Let me Pick...
Then Select ADB Driver.
That should fix it.
I hope it helps.
https://www.reddit.com/r/oneplus/comments/59ux5d/cant_root_because_windows_10_keeps_installing/

Qualcomm HS-USB QDLoader 9008 shows no COM #

Hi,
It happen when I mistakenly Flash this precious phone with Z2 ROM. Now it totally dead. once I want to try to Flash using PC, it is showing the Driver but no COM # in it.
I've tried so many driver but no change, it still no COM # in devices manager so in Miflash or any other Z1 Flashing Applications.
Need you help to solve this issue.

Method 1.
Turn off your device, keep pressing UP volume button and attach USB.
Method 2.
Turn off your device, attach USB cable and suddenly press POWER button after that (One time).
You will have Qualcomm port for 5 secs.

bhattyash32 said:
Method 1.
Turn off your device, keep pressing UP volume button and attach USB.
Method 2.
Turn off your device, attach USB cable and suddenly press POWER button after that (One time).
You will have Qualcomm port for 5 secs.
Click to expand...
Click to collapse
not working, still show no COM #
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Connect your device to PC,
Right click on port from device manager,
Go to properties> Port Settings> Advanced.
Tick "Use FIFO buffers", if it's already ticked. Leave it as it is.
Now locate "COM Port Number" and select any COM# (ex. COM3)
(Don't select 'in use' COM port)
Click "OK" and see if it works.

bhattyash32 said:
Connect your device to PC,
Right click on port from device manager,
Go to properties> Port Settings> Advanced.
Tick "Use FIFO buffers", if it's already ticked. Leave it as it is.
Now locate "COM Port Number" and select any COM# (ex. COM3)
(Don't select 'in use' COM port)
Click "OK" and see if it works.
Click to expand...
Click to collapse
It works, but Qfil says "No Port Available".
---------- Post added at 08:14 AM ---------- Previous post was at 08:11 AM ----------
bhattyash32 said:
Connect your device to PC,
Right click on port from device manager,
Go to properties> Port Settings> Advanced.
Tick "Use FIFO buffers", if it's already ticked. Leave it as it is.
Now locate "COM Port Number" and select any COM# (ex. COM3)
(Don't select 'in use' COM port)
Click "OK" and see if it works.
Click to expand...
Click to collapse
It works, but still Qfil says "No Port Available".

I'm facing same issue with my YU Yureka hardbricked phone also when I unplug it doesn't go, I need to restart my Pc to make it work again really need to solve this issue please help.

Is your phone in bootloop, if yes then let it completely die first. Then charge it for 5-10 mins( don't try to turn it on) and repeat the flashing process.
Make sure that ur flasing files are selected and com port dialogue box is already opened before connecting the phone on qfil. Then connect the usb cable holding the volume up button, as phone is detected by qfil imidiately press the ok button and then click on download. Com port detects only for 5 seconds.
Sorry for my bad english.

amjad551 said:
Is your phone in bootloop, if yes then let it completely die first. Then charge it for 5-10 mins( don't try to turn it on) and repeat the flashing process.
Make sure that ur flasing files are selected and com port dialogue box is already opened before connecting the phone on qfil. Then connect the usb cable holding the volume up button, as phone is detected by qfil imidiately press the ok button and then click on download. Com port detects only for 5 seconds.
Sorry for my bad english.
Click to expand...
Click to collapse
mine the same...meaning NO PORT SELECTION
what happen to my LENOVO Z5 pro gt after FAIL flash GSI?
1) phone in bootloop
2) check device manager ( show hidden files ) and found out adb hardware not connected
3) however CMD fastboot devices was listed but adb devices was not
4) decide to repair adb files from this source
https://forum.xda-developers.com/android/general/tool-adb-fastboot-installer-tool-windows-t3999445
thank god .. the port appear again.
edited:
BTW IF ABOVE METHOD CANNOT then TRY THE METHOD BELOW.
this was posted on the first thread by bhattyash32
i had a second fail flash GSI so no port selection again. THIS time i use method below..
Quote:
Originally Posted by bhattyash32
Method 1.
Turn off your device, keep pressing UP volume button and attach USB.
what i did based on recommendation METHOD 1 by bhattyash32
BTW this method works by turning off device and immediately do a long press POWER + UP
(try POWER + DOWN method if UP button method fail) button together ( keep pressing both button until port appear)
Method 2.
Turn off your device, attach USB cable and suddenly press POWER button after that (One time).
You will have Qualcomm port for 5 secs.