Database Users

[help] using htc hermest as modem for laptop

plaese help me i have softbank x01ht, and i want to use it as modem for my laptop. but my laptop doesn't seems to detect it.
my x01ht is on wm6, and i'm using internet sharing apps. but it doesnt seems to detect by my laptop.
i use windows xp sp1. any help?
is there any driver for modems that we need to install in the laptop? and where to get it?

not too sure if this will help...
http://pocketpccentral.net/help/cingular/8525_usb_modem.htm

thanks for the reply. but i want to use it to access internet using gprs?
any help, pleasee...

i'm geeting this error from device manager in control panel/system:
generic RNDIS
--------------
The drivers for this device are not installed. (Code 28)
To reinstall the drivers for this device, click Reinstall Driver.

then when try to install it i got this error massage :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
can some one help me?

Try going into Settings -> Connections, then USB to PC and uncheck 'enable advanced networking functionality' and hit ok. That may solve the RNDIS problem.
Also, to use your phone's internal data connection, use the WModem app in Program Files, make sure the APN is correct (in the WModem settings) then in Windows make a new connection using *99# as the number to dial, use the same username and password as your data connection requires normally. most of the UK network settings are on here, if you're on T Mobile UK i can give you more detailed advice but I suspect you're not
tip: kill ActiveSync before loading WModem, the connection just won't 'take' if it's still open because the phone has to be recognised as an htc modem by the PC, and if AS is still open that'll hijack the usb connection.

Do you have active sync installed? WM5 or WM6?

christopherwoods said:
Try going into Settings -> Connections, then USB to PC and uncheck 'enable advanced networking functionality' and hit ok. That may solve the RNDIS problem.
Click to expand...
Click to collapse
i've done this, still aint work
Also, to use your phone's internal data connection, use the WModem app in Program Files, make sure the APN is correct (in the WModem settings) then in Windows make a new connection using *99# as the number to dial, use the same username and password as your data connection requires normally. most of the UK network settings are on here, if you're on T Mobile UK i can give you more detailed advice but I suspect you're not
Click to expand...
Click to collapse
im using wm6 there is no modem apps, as far as i know, wm6 has internet sharing
tip: kill ActiveSync before loading WModem, the connection just won't 'take' if it's still open because the phone has to be recognised as an htc modem by the PC, and if AS is still open that'll hijack the usb connection.
Click to expand...
Click to collapse
done, it doesnt seems to work

The error message is suggesting a problem with the inf file.. (does a standard activesync connection work when you plug the phone in normally?)
i'd try searching all the inf files in windows\inf for the RNDIS text.. (you should only need to look in the OEMxx.inf files) when you find one delete it (keep a backup)
reboot and reinstall activesync latest version.. then reconnect and see if it redetects properly

sambartle said:
The error message is suggesting a problem with the inf file.. (does a standard activesync connection work when you plug the phone in normally?)
i'd try searching all the inf files in windows\inf for the RNDIS text.. (you should only need to look in the OEMxx.inf files) when you find one delete it (keep a backup)
reboot and reinstall activesync latest version.. then reconnect and see if it redetects properly
Click to expand...
Click to collapse
still didnt solve the problem, i couldnt find "windows\inf" folder. ny more solution

i got this error, when i use internet sharing in WM6

try an update driver on the generic RNDIS device and then choose location and pick the drivers in activesync (under Program Files\Microsoft ActiveSync\Drivers) presuming that you use activesync 4.5

You need to uninstall any version of active synch prior to version 4.5...reboot and install 4.5.
On the hermes, go to settings/connections/usb and uncheck advanced network connectivity.
Connect your hermes, make sure active synch finds it and synchs. Then disconnect it. Go into file/connections on the desktop active synch and disable the usb connection.
On the hermes, open active synch/options and uncheck the box where it says connect through usb.
Then plug in the hermes and start internet sharing. This will allow it to connect. Each time you want to synch you have to reverse the steps in active synch both on the pc and hermes. Once you are synched disable the connections again.
I have been using my hermes like this all summer. Works great.

[Q]Lg Factory Rom On My Quantum?

Looking for the factory rom for my lg c900, as I flashed it to mango but cant restore nodo on it can someone help me out?

Here you go!
There are instructions and download links there.
When I flashed my Quantum, it took me a while to realise that (at the very very end), you need to press 'start' in the LGDP2 utility BEFORE connecting the phone. So watch out for that.

thnx for that, i've seen the thread and downloaded everything, but this step:
"2. Install LG United Modem Driver, connect the phone to PC through USB cable and let the drivers to be installed. USB 1.1 is recommended."
I dont get what to do, after I install the united modem driver, and not sure where or how to get the firmware that it lists in step 3:
3. You'll need firmware in DZ format and the correct DLL for your model.

2: You just download it and plug in your phone. Nothing really happens, but it's necessary because later, when you want to find out which COM port it's plugged into, you'll have to go into Device Manager and, under Modems, you'll find your phone and right-clicking it and selecting proprieties.
3: The DZ Firmware is the first file you downloaded (it's under FIRMWARES on the page I linked). You have to choose the right one for your phone (by carrier) and unpack the contents. In there, you'll find a .DZ file.
A link to the DLL files is also provided (the word DLL in that step is the link). Again, download the right one (the one with the letter at the end of C900 that corresponds with the Firmware you downloaded - nothing (US), C (Canada) or K (Australia or NZ).
If you have any more problems with the instructions, just ask. We'll keep them on this thread in case anyone else needs help with this in the future.

wow I cant believe I missed those links lol thnx alot, i got the dll and am downlading the DZ now, and ill let you know if i have any problems

Okay so I dl'ed the DZ file, but when i open the lgdp32 exe and select umts division, it gives me a fail to open dll file, and then has a ports selection screen with com 7 selected. And com 7 as IDLE.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
BTW this is with my phone unplugged, I noticed that nothing happened, and in device manager it just said drivers werent installed,but in emergency download mode it installs all drivers through the found new hardware wizard.
And got this during the installation:

though I'm not sure how to resolve that last issue, I do know how to fix the idle problem: ignore it. It took me forever to realize that: just press ok and then, in the main window, press start. Then connect the phone.
Also, are you sure that it's connected into port 7? Did you check in the device manager?

well the first time i plugged in the phone i was able to check and it said port 0, but I dont see that, but now that its giving me this INF message, when i click properties now the device manager just stops responding for some reason.
EDIT:when i have the phone plugged in normally, not emergency download, it says this:
Location 0 (USB Device)
for the port, but i dont see a com 0 option?

Oddly enough, my phone is now saying theres an update available, but it doesnt sync with the zune software for some reason.
EDIT:just got the installation fixed, and this is the modem page for the device manager.
I did everthing you told me, and found the com port(it was com 3), but when i hit start and plug in the phone in emergency download mode, nothing happens for some reason.

Are you sure that you're using the LGDP2_V36?
You said V32 earlier and I just noticed it. If that's the programme you've been using, try it with the V36 in its stead.

yeah I've been using the 36 one, sorry about misposting not sure what to do now though.
Could the error message "cant find monitor port" have anything to do with this?

Ok, so Today I had to flash my device anyway, so I went through the steps to get more insight into your problems.
What I learned is that you have to ignore all the problems.
So, once you've installed the LG drivers, plug the phone in in Emergency Download Mode and let the computer do whatever it needs to. If there's an error, that's fine. Next step.
Start the LGDP2_V36 UMTS and ignore any problem you're given once you've chosen the option UMTS.
In the bigger window that pops up, click ALL to select all the ports. It saves you the trouble of trying to find the port number of your Quantum.
Find the DLL and run the 'Download Configuration' and find the DZ Firmware. Press ok.
The 'Can't Find Monitor Port' doesn't mean anything. Press OK and continue.
Click Start first then plug in your phone in Emergency Download Mode.
Try this, then get back to me. I'll be checking the forum every 10-or-so minutes to help you resolve your problem as fast as possible.

okay im starting right now, ill just keep updating this post through out.
Update:installed drivers correctly with phone plugged in, unplugged it and started up LGDP2_V36 UMTS, then picked all com ports, found the dll and selected the dz file, hit ok, ignored the cant find monitor port, hit start, then plugged in the phone again in emergency download mode, but when i plug it in, all the ports still read idle, and then the found new hardware wizard still pops up even though i already installed it, then it gives me that INF error. The program is still running and the phone is still plugged in. What do i do from here?
Update:Just noticed that the LG united modem driver says Win7 in the folder name, Do I have to have windows 7? cause Im running XP SP3. and also theres two installation packages, am i supposed to install them both?

Sorry for the delay...
I'm not certain... I have Windows 7 on my PC. I'll do some searching and get back to you.

Here, try this Driver and give me news on how it worked.
Link!

I downloaded the driver detective setup thing, but its asking for a registration code, and I dont have $25 to spend

Ah. Let's try something cheaper.
Update: How about this?

the drivers installed fine, but its still doing the same thing, after i get past the port selection and hit start, when i plug in my phone, all the tiles still read idle, but now the device manager doesnt crash when i select properties for it, and it still says its in COM3. also on the ports selection, am i supposed to check off usb mode?

USB is not supposed to be checked.

okay, its still doing the same thing. I really appreciate all the help with this BTW

[q] help: Mms, internet, nav, on flashed evo

OK, I bought a Evo Flashed to Metro PCS from someone. I simply did *228 and was able to activate the phone. When you activate like this, you wont get MMS and Internet working, just talk and text. Can i get this working myself? IF so what steps do I take?

wow thanks for the help

Metro pcs flashing hope this helps
rwalkerfla said:
OK, I bought a Evo Flashed to Metro PCS from someone. I simply did *228 and was able to activate the phone. When you activate like this, you wont get MMS and Internet working, just talk and text. Can i get this working myself? IF so what steps do I take?
Click to expand...
Click to collapse
1. Make sure you have all the drivers need for the phone.
USB Drivers Download
USB Drivers for rooting
DIAG Driver Download
64bit drivers
32bit drivers
2. Make sure your phone is rooted
2.3.3 root click here
revolutionary.io
Please make sure to insert the beta key at it before installing it.
Beta key will appear once you click the download button.
2.2 root click here
3. Once successfully rooted next step is to download the software needed. I will add links as they are needed.
4. Ok before this flashing process starts you have to get call and text on your phone. One way is to go to a corporate metro store and second one you know those who need second way.
5. Assuming that you have your phone rooted you need to download this rom and then copy it to root of your sdcard.
Download Custom MetroPCS ROM here
6. Install above rom from recovery. To get to recovery mode turn off your evo. Press and hold the volume down key and press the power key. From the hboot menu using volume key goto recovery and press the power key. You should be in recovery menu. click wipe data and also click wipe cache. Click install zip from sdcard and look for file you copied to sdcard.
After installation is done reboot the phone, first boot will take longer time.
Download and install this app MslReader. Easy way is to copy it to sdcard and then using astro file manager install it.
Once installed open the app on your phone and read your MSL Code.
7. Install QPST (Click here to download) and install it.
Follow it to get the internet fixed
1. Go to your phones dialer and dial ##3424#
2. Plug in your phone to the computer
3. Go To Device Manager and there should be a unknown device
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
4. Right Click on The unknown device and Click on Update Driver Software
5. Click on the 2nd Option
6. Browse to the folder where you downloaded the drivers
7. Let It Install
8. Once It Installs, depending If Your system is 32 Bit Windows xp through 7 or Windows Vista or 7 64 Bit the place where you'll see the port will be different.
For 32 Bit, In Device Manager Check under communication Port and you'll see
the port for your device
For 64 bit, In Device Manager check under Modems and right click on the HTC Modem and go to properties. Go to the modem tab and you'll see your port there
1. Now Open Up QPST Configuration
2. Click On Add New Port
3. Uncheck the box that says Show Serial etc etc
4. This is what it should look like after you add port
5. Go To Start Clients and click on Service Programming
6. This will pop up just hit ok
7. This Is the next window that will come up
8. Click on Read from Phone and enter your SPC Code (This was the code found in the MSL Reader app, usually its 000000)
9. Once it reads the contents from your phone, there will be a check box on the right side that says SPC Change Available. Check the box and change your the area that says Service Programing to 6 Zero's. Don't hit write just yet
10. Go to roam tab click browse and choose metro prl.
11. Go To the Display Tab and Change It To MetroPCS
12. Go To The M.I.P. Tab and copy the settings in my picture and be sure to set it to SIMPLE IP! Right now its set to MOB+Simple IP on stock HTC Phones
13. Now Click on the profile 0 and hit edit
Copy all the settings that are displayed in my picture. In NAI and Tethered NAI type (Your10DigitPhone#)@mymetropcs.com. In HA Shared Secret and AAA Shared Secret click on enter text string and type "metropcs" without the quotes in lowercase.
14. Now do the exact same thing for Profile 1.
15. Go To the PPP Config Tab Now and copy all the settings displayed in the Screenshots
16. Still while in the PPP Config Tab go to UM Section and copy the settings exactly
Now for Tethered Nai and User ID type in your
(your10digitPhone#)@mymetropcs.com
For you password go to this website and type in your MEID or ESN in the box labeled "Calculate." Once you calculate your password(it will be called MetroPCS MSL) enter into your password box. You may find this on the top of QPST Service programming window. If you look at the pictures its the numbers located on top that are blurred out.
17. One You Have finished in the UM Section of the PPP Config tab go to the AN Tab copy the setting listed in the Screenshot.
This Time you cant enter anything in the tethered nai but in USER ID enter once again (your10digitphone#)@mymetropcs.com and the same MSL password you used before in the last tab.
18. One Finished Hit Write to Phone. Your phone will reboot after its done. If You Get an Error don't worry just ignore it and reboot your phone.

Pls! Qualcomm diagnostic driver for ale-l04

Hello,
Please does anybody have the correct Qualcomm Diagnostic Driver for Huawei P8Lite ALE-L04? I am trying to tweak my phone (LTE Band modify) but cant see it in diagnostic mode on my Win 10 PC's Device Manager - and so also cant see it on QPST even after installing a qualcomm driver i got from the net. If I add the COM port on QPST, it sees it as a non-diagnostic connection and so doesnt actually see the phone as connected.
Also, if there are lots of drivers that can work but I'm not setting it up properly on my PC, can someone pls send me correct procedure - and maybe one of the correct drivers? Thank you all.

Maybe you need to switch the USB mode.
Dial *#*#2846579#*#*, Background Settings -> USB Port Settings, select Manufacture Mode
Post updates! I'd like to try something similar.

dedenn said:
Maybe you need to switch the USB mode.
Dial *#*#2846579#*#*, Background Settings -> USB Port Settings, select Manufacture Mode
Post updates! I'd like to try something similar.
Click to expand...
Click to collapse
I have already applied all the above settings and allowed the default modem driver to install even before my original post.
Under Device Manager -> Modems, my device appears as "Android Adapter Modem" on COM Port 9 while:
Under Device Manager -> Ports (COM & LPT), my device shows as "Android Adapter PCUI (COM6)" and "DBAdapter Reserved Interface (COM5)".
Then on QPST, even after adding the COM9 port, the phone is not seen and therefore both QPST and QXDM cannot connect to it.
If I had the correct MSM8939 Qualcomm Diagnostic driver - or I can be shown how to switch the phone to go directly into diagnostic mode, I believe it can then be seen by QPST (as MSM8939 Diagnostic port, I think) and so can connect to QXDM.
Please any help is appreciated. Thank you.
(Pictures attached)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Can you set "Qualcomm background open setting" to open?
It asks for a password, I just figured out any 16-character string (e.g. aaaaaaaaaaaaaaaa) works (KiteKat B111 official ROM). But slill I get "Qualcom background unlock failed"...

I've used several password to try and open the Project Menu -> Background Settings -> Background Debug but none works. Even tried my bootloader unlock code. Do you have any password code I could try?

Please and pleeeaase, does anybody have the code to set Qualcomm background debug to "OPEN" in the hope that I can enter "diagnostic mode" and use QPST+QXDM on my phone?
Or is there a driver I can use on the P8-Lite ALE-L04 Qualcomm MSM3989 chipset to connect to it in diagnostic mode on QPST? Any help will really be appreciated cos i've:
1. tried a range of drivers both from xda and the internet - and non can connect my phone to my PC in diagnostic mode - probably because they are not the tailored driver for the Qualcomm Snapdragon 615 MSM8939 chipset
2. tried to contact Huawei severally but got no response from them.
3. even searched thru qualcomm website and contacted them but they told me they're a "technology provider" and therefore dont answer product specific questions. They advised i contact Huawei. Again.
Alternatively, is there another method for modifying the phone's LTE band without using QPST and QXDM?
Thanks in advance for any help.

I was only able to decompile the Java part of the ProjectMenuAct.apk that is responsible for the hidden menu (it's odexed, the virtual machine code is not in the .apk, but in ProjectMenuApk.odex file), and it was the 4.4 KitKat official ROM.
The Java code verifies the password is 16 characters long. If it's not, a message says the password is wrong. If the password has the correct length, it's sent to some native ARM code (maybe libprojectmenu.so), which I couldn't decompile (too advanced for me)... The native code returns an error that the 'backgroud unlock' was not successful, maybe it needs some other password.
For deactivating the 'background unlock' the Java code uses '0000000000000000' default password.
I got stuck here, I got rid of the phone (and got another one with similar problem .

Still stuck with my ALE-L04 and cant modify the LTE band to use Band 28 here. Any help?
Meanwhile, is there no available OEM or even better a Custom ROM for ALE-L04 to Android 6 so I can upgrade and see if it helps unlock Project menu/Background Debug and I can connect in Diagnostic Mode to QPST & QXDM and modify LTE band?
Merry Christmas!

Hi! I have a Y635-L01. Stuck in the same place here. Any news about this? I've tried the bootloader unlock code (which is also a 16-digit number), but without luck.
I'm trying to get the code from the seller, which happens to be a big carrier in Spain, but it's kind of difficult since I don't have a subscription (or a SIM card, for that matter) with them. I only bought the phone, unlocked.

Qualcomm HS-USB QDLoader 9008 shows no COM #

Hi,
It happen when I mistakenly Flash this precious phone with Z2 ROM. Now it totally dead. once I want to try to Flash using PC, it is showing the Driver but no COM # in it.
I've tried so many driver but no change, it still no COM # in devices manager so in Miflash or any other Z1 Flashing Applications.
Need you help to solve this issue.

Method 1.
Turn off your device, keep pressing UP volume button and attach USB.
Method 2.
Turn off your device, attach USB cable and suddenly press POWER button after that (One time).
You will have Qualcomm port for 5 secs.

bhattyash32 said:
Method 1.
Turn off your device, keep pressing UP volume button and attach USB.
Method 2.
Turn off your device, attach USB cable and suddenly press POWER button after that (One time).
You will have Qualcomm port for 5 secs.
Click to expand...
Click to collapse
not working, still show no COM #
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Connect your device to PC,
Right click on port from device manager,
Go to properties> Port Settings> Advanced.
Tick "Use FIFO buffers", if it's already ticked. Leave it as it is.
Now locate "COM Port Number" and select any COM# (ex. COM3)
(Don't select 'in use' COM port)
Click "OK" and see if it works.

bhattyash32 said:
Connect your device to PC,
Right click on port from device manager,
Go to properties> Port Settings> Advanced.
Tick "Use FIFO buffers", if it's already ticked. Leave it as it is.
Now locate "COM Port Number" and select any COM# (ex. COM3)
(Don't select 'in use' COM port)
Click "OK" and see if it works.
Click to expand...
Click to collapse
It works, but Qfil says "No Port Available".
---------- Post added at 08:14 AM ---------- Previous post was at 08:11 AM ----------
bhattyash32 said:
Connect your device to PC,
Right click on port from device manager,
Go to properties> Port Settings> Advanced.
Tick "Use FIFO buffers", if it's already ticked. Leave it as it is.
Now locate "COM Port Number" and select any COM# (ex. COM3)
(Don't select 'in use' COM port)
Click "OK" and see if it works.
Click to expand...
Click to collapse
It works, but still Qfil says "No Port Available".

I'm facing same issue with my YU Yureka hardbricked phone also when I unplug it doesn't go, I need to restart my Pc to make it work again really need to solve this issue please help.

Is your phone in bootloop, if yes then let it completely die first. Then charge it for 5-10 mins( don't try to turn it on) and repeat the flashing process.
Make sure that ur flasing files are selected and com port dialogue box is already opened before connecting the phone on qfil. Then connect the usb cable holding the volume up button, as phone is detected by qfil imidiately press the ok button and then click on download. Com port detects only for 5 seconds.
Sorry for my bad english.

amjad551 said:
Is your phone in bootloop, if yes then let it completely die first. Then charge it for 5-10 mins( don't try to turn it on) and repeat the flashing process.
Make sure that ur flasing files are selected and com port dialogue box is already opened before connecting the phone on qfil. Then connect the usb cable holding the volume up button, as phone is detected by qfil imidiately press the ok button and then click on download. Com port detects only for 5 seconds.
Sorry for my bad english.
Click to expand...
Click to collapse
mine the same...meaning NO PORT SELECTION
what happen to my LENOVO Z5 pro gt after FAIL flash GSI?
1) phone in bootloop
2) check device manager ( show hidden files ) and found out adb hardware not connected
3) however CMD fastboot devices was listed but adb devices was not
4) decide to repair adb files from this source
https://forum.xda-developers.com/android/general/tool-adb-fastboot-installer-tool-windows-t3999445
thank god .. the port appear again.
edited:
BTW IF ABOVE METHOD CANNOT then TRY THE METHOD BELOW.
this was posted on the first thread by bhattyash32
i had a second fail flash GSI so no port selection again. THIS time i use method below..
Quote:
Originally Posted by bhattyash32
Method 1.
Turn off your device, keep pressing UP volume button and attach USB.
what i did based on recommendation METHOD 1 by bhattyash32
BTW this method works by turning off device and immediately do a long press POWER + UP
(try POWER + DOWN method if UP button method fail) button together ( keep pressing both button until port appear)
Method 2.
Turn off your device, attach USB cable and suddenly press POWER button after that (One time).
You will have Qualcomm port for 5 secs.