Hello can anyone help me I tried doing now the unlock using pc, I followed the instructions carefully but after the end instructions. My oppo a37f won't turn on and when I tried to charge it nothing happen there is no charging image and when I tried to insert it to pc again without pushing the volume it automatically detect the qualcom driver and when I tried to open the exe file again it stuck in starting to receive Sahara protocol message
Related
I was trying to flash CM11 ROM in my Samsung Galaxy Ace GT-S5830, for that I have also installed CWM 6.0.5.3. While flashing ROM from recovery it failed with some error message, I tried it once again and again it stopped with the same error message. I decided to try some other ROM and kept mobile on side to search new rom, the mobile was still in recovery mode connected with usb for charging, after a minute as I saw at my mobile it was not in recovery mode, the screen was OFF. I tried to restart it again & again but failed, I even tried to start it in recovery mode but failed. Tried overnight charging, thinking that its battery is down, but failed to restart it. Then I searched about it on google, and came to know it was bricked with solution to flash it with stock rom using Odin, if it is still getting detected in PC. My PC is still detecting my mobile, tried flashing stock rom using Odin, but it is getting stuck at "< 1 >setup connection...". I don't know what to do now. My mobile is not in warranty, so no way in getting it repaired from service center. If anyone know any solution for this, then please tell me. I am eagerly waiting for your reply. Moderators, please don't delete this thread saying to go and search for same kind of threads, I have already done that & at last posted in new thread. Please Help me as soon as possible. Thanks..
http://download1187.mediafire.com/eew353b6p3sg/y2yja47mu5ew4g5/samsung+Galaxy-Ace+gt-s5830.rar
Extract it, open "S5830_Odin+Multi+Downloader+v4.38.exe" then in the OPS section select the .ops file in the extracted folder, then give a check on "One package" check box. Then on the bottom press the "One package" button and select the firmware in the folder and you're done !
P.S. If that doesn't work, try reinstalling Samsung USB Drivers, removing Kies, switching cables, ports or even PC's (if possible)
Hi,
I had updated my oneplus two with cyanogenmod 13 successfully. I had been running this for more than 5 months.
Yesterday i had downloaded an update of CM13 and was trying to install the update, the phone just went blank with a black screen so i restarted the phone. Since then the phone is not loading into the OS, when i try restarting the phone the oneplus logo screen just flashes and then the phone just displays black screen or switches off.
I am not able to enter into recovery mode which is the biggest problem i am facing due to which i am not able to even perform other recovery options.
I connect the phone to computer using usb and when i use any command such as adb devices, i dont see any device in the list. i get error: no devices when i use other adb commands.
I tried using QFIL from quallcom, but i get the below error when i click the download button:
Process Index:0
Programmer Path:E:\8675_W00\prog_emmc_firehose_8936.mbn
Image Search Path:E:\8675_W00
Please select the XML file
Invalid image search path, ignored
Start Download
Program Path:E:\8675_W00\prog_emmc_firehose_8936.mbn
COM Port number:11
Sahara Connecting ...
Sahara Version:0
Start Sending Programmer
Download Fail:System.Exception: Unable to download Flash Programmer using Sahara Protocol
at QC.QMSLPhone.Phone.QPHONEMS_SaharaArmPrgDownload(String sFileName)
at QC.SwDownloadDLL.SwDownload.QPHONEMSSaharaDownloadArmPrg(UInt64& version, String armPrgPath)
Download Fail:Sahara FailSahara Fail
Finish Download
---------------------------------------
Please help me in unbricking the oneplus two.
Solved?
Hi md vasi, you can try the methond on the oneplus community search for "unbrick Oneplus 2", choose "[Q&A] The Ultimate OnePlus 2 Guide - Solutions e.t.c.", go to "how to unbrick".
I've also a bricked OP2 that has same issues as yours, happened exactly the same way it happened to you but while updating Resurrection Remix Mod. I've unfortunately not managed to unbrick my device. Hope you it will work for you, please follow the procedure step by step and keep me posted if you can unbrick your OP2 and tell me how you did it. Ok?
Good luck buddy:good:
axaman943 said:
Hi md vasi, you can try the methond on the oneplus community search for "unbrick Oneplus 2", choose "[Q&A] The Ultimate OnePlus 2 Guide - Solutions e.t.c.", go to "how to unbrick".
I've also a bricked OP2 that has same issues as yours, happened exactly the same way it happened to you but while updating Resurrection Remix Mod. I've unfortunately not managed to unbrick my device. Hope you it will work for you, please follow the procedure step by step and keep me posted if you can unbrick your OP2 and tell me how you did it. Ok?
Good luck buddy:good:
Click to expand...
Click to collapse
were you able to unbrick your OPT?
phorcus said:
were you able to unbrick your OPT?
Click to expand...
Click to collapse
Yep, the most important is that you find the right driver for Snapdragon 810, i can't recall where i found the link, it took me a while, wait... i got it, i've found the right driver's link on a website named Android brick or something, with the right driver the flash tool from OP2 will recognise your device and flash stock build.
good luck
axaman943 said:
Yep, the most important is that you find the right driver for Snapdragon 810, i can't recall where i found the link, it took me a while, wait... i got it, i've found the right driver's link on a website named Android brick or something, with the right driver the flash tool from OP2 will recognise your device and flash stock build.
good luck
Click to expand...
Click to collapse
gfil is giving me this error:
COM Port number:5
Sahara Connecting ...
Sahara Version:0
Start Sending Programmer
Download Fail:Unable to download Flash Programmer using Sahara Protocol
Download Fail:Sahara FailSahara Fail
Finish Download
and msm tool is also giving me error but since its in chinese i cannot understand them, do you have any other ways to unbrick OPT
1. What is a "hard bricked" phone?
Hard brick is the state of android device that occurs when your device is unbootable without a bootloop. A hard Brick device generally show little to no signs of life (you wont be able to switch it on and the screen doesnt turn on).
A phone gets hard-bricked due to trying install ROM not made for the device or use ROM Manager incorrectly.
2. Procedure
Step 1: Download all the necessary files below:
download link: en(dot)miui(dot)com/a-234.html
MIUI ROM Flashing Tool(*.exe file)
MIUI Fastboot ROM package for your device(*.tgz file) - Any variant Global / Chinese should work
Step 2: Extract MIUI Fastboot ROM package using 7zip or any other software you prefer
Correctly extracted folder should look like: (Image folder), flash_all.bat e.t.c.
After extracting rename parent folder to something short such as "mido". Avoid parent folder of ROM package extracts being too long
Step 3: Install MIUI ROM Flashing Tool
If you get "driver not signed pop up during installation click "install anyway option or similar"
To test if everything installed correctly, connect your phone to your computer and open flash tool then hit refresh button, you should see an index and com port which indicates your phone is being detected.
If phone not detected restart computer with phone still connected and navigate to device manager->ports (you should see something like Qualcomm hs-usb qdloader 9008.) if its not there re install MIUI ROM Flashing tool
Note that if you try to flash your extracted package at this point the installer will fail to communicate with the phone, step 4 is very necessary to ensure flashing can commenceStep 4: Remove back cover and disconnect phone battery
Disconnect your phone from your PC and find a nice dissasembly video on youtube to help you remove the back case of your phone. The battery is connected to the phone via one black flex cable on the right of the battery, simply detach this to disconnect battery.
Step 5. Flash your phone.
With your phone still opened, and battery still disconnected.
1. Open Flashing tool and connect your phone to your computer
2. Hit refresh to let your computer detect your phone.
3. Hit select/browse button and select parent folder from step 2. which has your rom
4. Select clean all option at the bottom of flash tool window
4. Hit flash.
5. Once flash is complete your phone will remain off disconnect from computer and reconnect the battery then switch your phone on.
3. Done
At this point your phone should be back to life. Close your phone's cover and then youre done.This guide helped me revive my Redmi note 4X snapdragon 625 3GB - please share youre experience if it doesnt work for you
Thanks man!!!!!!!!!!
Y day my rn4 sd hard bricked, with your guide I completely recover it.......
Once again thanks...... :victory:
Please, help me:
"cannot receive hello packet,MiFlash is trying to reset status!"
alexfelipe said:
Please, help me:
"cannot receive hello packet,MiFlash is trying to reset status!"
Click to expand...
Click to collapse
Yeah, I'm getting that. And then "Object reference not set to an instance of an object" But then I just tried a few more times, maybe unplugged the cable and plugged it in again, and it worked.
not working
not working on my RN4X. while using MiFlash 2015 it is stuck on "Send nop command" and while using the 2016 version of MiFlash it is either "cannot receive hello packet" or cannot "ping". the latest version of MiFlash cannot be installed because of some cabinet file is missing. I'm stuck with this for a whole day now. is there anything that I'm missing??
Hello,
i have recently bricked my Meizu M3 Note phone when updating beta firmware.
Phone seems to be totally dead, unable to power on, stuck on black screen. My PC recognize the phone: Windows 10 seeing it as MediaTek USB Port, but it is continuously switch their status, as if the cable were connected and disconnected continuously.
I've tried with various versions of SP Flash tools, and also followed various howto including this:
https://forum.xda-developers.com/android/development/developer-verified-meizu-m3-note-hard-t3682743
But i get various code errors, depending on try flashing with auth file or without.
Particularly, it seem that version 5.13.52.200 of Flash Tool maybe working, but after a few time after pressing Download Button and plug the phone cable, it comes report a error:
"Can Not pass bootrom start command! Possibly target power on too early"
If someone have any suggestion, i appreciate. Thanks in advance, i hope that my phone is recoverable.
Really hoping someone can help me out here. I have a Nexus 6P, Non-BLOD. Yesterday, after clean flashing the latest version of EvoX, while setting some things up, device randomly crashed. No Shut down animation or anything. Just black screen. Tried turning it on via Power Button and then Power And Volume Buttons but nothing works. Connected it to PC and see it's Detected as Qualcomm USB Bulk (9008) in Coms and Ports. Did some research and found out I have to flash via QFIL. And this is where I am stuck. I tried several versions, but it doesn't flash/gives Shara error. I tried reinstalling driver. I also read a guide here. But the Firmware link is dead and it says to flash via MiFlash, something I can't even try since the Link in the OP is dead. I tried some different versions of QFIL but all of them give a Sahara Communication error. Now I'm pretty much at a loss on what to do. I'd really like to fix my 6P. And I would appreciate anyone taking the time to point me in the right direction, or help me fix it. Thanks in Advance.
DarthVader said:
Really hoping someone can help me out here. I have a Nexus 6P, Non-BLOD. Yesterday, after clean flashing the latest version of EvoX, while setting some things up, device randomly crashed. No Shut down animation or anything. Just black screen. Tried turning it on via Power Button and then Power And Volume Buttons but nothing works. Connected it to PC and see it's Detected as Qualcomm USB Bulk (9008) in Coms and Ports. Did some research and found out I have to flash via QFIL. And this is where I am stuck. I tried several versions, but it doesn't flash/gives Shara error. I tried reinstalling driver. I also read a guide here. But the Firmware link is dead and it says to flash via MiFlash, something I can't even try since the Link in the OP is dead. I tried some different versions of QFIL but all of them give a Sahara Communication error. Now I'm pretty much at a loss on what to do. I'd really like to fix my 6P. And I would appreciate anyone taking the time to point me in the right direction, or help me fix it. Thanks in Advance.
Click to expand...
Click to collapse
Same thing happened to me in the same ROM (Weird) .. but i managed to flash the qfil successfully .. but still phone doesnt boot up .. here's what you should do ... try to hard reset the phone until you hear the disconnecting sound from pc . Ready all the necessary flash in the qfil and as soon as u hear the device connected hit the download button .. it will flash without the sahara protocol error . Be quick ! tell me if that fixed ur problem . Peace
hk1271 said:
Same thing happened to me in the same ROM (Weird) .. but i managed to flash the qfil successfully .. but still phone doesnt boot up .. here's what you should do ... try to hard reset the phone until you hear the disconnecting sound from pc . Ready all the necessary flash in the qfil and as soon as u hear the device connected hit the download button .. it will flash without the sahara protocol error . Be quick ! tell me if that fixed ur problem . Peace
Click to expand...
Click to collapse
Thanks. Can you share the files you used please? I can't for the life of me, find the correct download files. There was a Nexus6P_Unbrick by TenFar but all the links are down.
DarthVader said:
Thanks. Can you share the files you used please? I can't for the life of me, find the correct download files. There was a Nexus6P_Unbrick by TenFar but all the links are down.
Click to expand...
Click to collapse
I used another qfil firmware
https://drive.google.com/file/d/1PixuumVVzxBKUsQ88X3AJ21Hsi2mV3Zq/view
Here is the link .. you can find the firehose and all files in the firmare folder . Best of Luck
I have a similar situation where I am unable to power on the phone in any way, and I am only able to communicate with the qualcom USB 9008 driver.
I am following your instructions using the firmware files you provided (thank you!) and I can see an attempt is being made to download the files before sahara error occurs.
I don't think I enabled developer options when my Nexus 6P was working and wondered if sahara error is due to that.
I was wondering if you had previously enabled developer options by tapping on the build number several times, once the operating system booted and if that is a critical step in being able to recover the Nexus 6p from this hard bricked state where I am stuck in EDL 9008 mode, and unable to access bootloader, and volume+power keys do not do anything...I feel like I'm screwed (and already moved on) but using time these days to learn about android devices!
thanks!