A friend has asked me to look at this Nokia Lumia 520, apparently it turned on one day and displayed this error message "unable to find a bootable option. Press any key to shutdown"
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Nokia Software Update for Retial recognises the phone and says software can be installed:
This downloads fine and starts the install process, however always fails with the message "phone not supported by nokia software updater retail"
I have also tried using NaviFirm+, searching for the product code 059S3T5 which lets me download the RM914_3058.50000.1425.0006_RETAIL_eu_euro1_327_06_452364_prd_signed firmware.
However i'm unable to flash this with the Nokia Care Suite, it states: 0xFA001106: Signature check of FFU file fails. Reason(s): The FFU file is not correctly signed or not signed for this device.
Has anyone got any suggestions on what else i can try to flash this firmware? or to try fix the phone?
I was following the tutorial here Flash/unbrand Lumia devices thinking if the firmware was re flashed all would be fine.
Cheers for any advice
Have you try with this
http://www.microsoft.com/en-us/mobile/support/faq/?action=singleTopic&topic=FA142987
Thanks for the suggestion, I have tried that, it will download the firmware too, however fail before flashing it stating the device is not supported.
InsaneNutter said:
Thanks for the suggestion, I have tried that, it will download the firmware too, however fail before flashing it stating the device is not supported.
Click to expand...
Click to collapse
I think win partition is crash. (like memory damage/corruption)
Hardware related problems.
InsaneNutter said:
A friend has asked me to look at this Nokia Lumia 520, apparently it turned on one day and displayed this error message "unable to find a bootable option. Press any key to shutdown"
Nokia Software Update for Retial recognises the phone and says software can be installed:
This downloads fine and starts the install process, however always fails with the message "phone not supported by nokia software updater retail"
I have also tried using NaviFirm+, searching for the product code 059S3T5 which lets me download the RM914_3058.50000.1425.0006_RETAIL_eu_euro1_327_06_452364_prd_signed firmware.
However i'm unable to flash this with the Nokia Care Suite, it states: 0xFA001106: Signature check of FFU file fails. Reason(s): The FFU file is not correctly signed or not signed for this device.
Has anyone got any suggestions on what else i can try to flash this firmware? or to try fix the phone?
I was following the tutorial here Flash/unbrand Lumia devices thinking if the firmware was re flashed all would be fine.
Cheers for any advice
Click to expand...
Click to collapse
Hi,
Have you sorted your phone out yet?
BruceKDallas said:
Hi,
Have you sorted your phone out yet?
Click to expand...
Click to collapse
Hi,
Nope i could never fix the phone, I spent loads of time messing about with it however think it was a hardware related problem.
I've given it back to my friend and shes since got a new phone.
I am into the same situation... NOKIA 520 RM-914 Code 059S7H0
"ERROR: Unable to find a bootable option. Press any key to shut down". Any button I push, the phone is going in bootloop ending with this ERROR...
I have tryed first with Windows Device Recovery Tool (WDRT) 3.1.4 to repair it, but no success...
In WDRT my Lumia is not detected automatically, so i must choose manually device manufacturer. To be detected I must restart the Lumia when DWRT is trying to detect it.
The Phone is detected as LUMIA phone, firmware version: unknown, Software available on server: 3058.50000.1425.003.
When I try to install the software after I download the package, the result is:
"Operation ended with failure. The software is not correctly signed or not signed for this device."
The NOKIA driver is seen as NOKIA BOOTMGR.
Then I've search on the internet about this problem and I've found this thread.
I tried the advanced mode with thor2.exe, I downloaded manually the firmware for my device Lumia 520, RM-914, Code 059S7H0
I opened Command Prompt as administrator, then used the command:
cd c:\Program Files (x86)\Microsoft Care Suite\Windows Device Recovery Tool\
I used the command line to extract gtp0.bin from ffu image:
thor2 -mode ffureader -ffufile "C:\rm-914\RM914_3058.50000.1425.0003_RETAIL_eu_hungary_422_03_447211_prd_signed.ffu"
The result was 2 files, gpt0.bin and GPT1.bin. I renamed gpt0.bin as msimage.mbn.
RKH of the device is:
RKH of SBL1: F771E62AF89994064F77CD3BC16829503BDF9A3D506D3FACECAEF3F808C868FD
RKH of UEFI: F771E62AF89994064F77CD3BC16829503BDF9A3D506D3FACECAEF3F808C868FD
I've downloaded the hex file for my Lumia RM-914 to have the 2 files HEX.hex and msimage.mbn for the command line:
thor2 -mode emergency -hexfile "C:\TEMP\HEX.hex" -mbnfile "C:\TEMP\msimage.mbn" -orig_gpt
THOR2 1.8.2.18
Built for Windows @ 13:36:46 Jun 16 2015
Thor2 is running on Windows of version 6.1
thor2 -mode emergency -hexfile C:\TEMP\HEX.hex -mbnfig_gpt
Process started Sun Dec 06 23:12:08 2015
Debugging enabled for emergency
Initiating emergency download
Operation took about 10.00 seconds.
THOR2_ERROR_CONNECTION_NOT_FOUND
THOR2 1.8.2.18 exited with error code 84000 (0x14820)
The Phone is still in NOKIA BOOTMGR mode...
If I try to disconnect the phone and restart, it goes into the the same message:
"ERROR: Unable to find a bootable option. Press any key to shut down", not showing me the RED screen like it should be.
If I go into the next step for flashing the device with the command line:
thor2.exe -mode vpl -maxtransfersizekb 1 -vplfile "C:\RM-914\RM914_059S7H0_3058.50000.1425.0003_037.vpl"
the screen changes into a big NOKIA logo, the driver goes from NOKIA BOOTMGR into NOKIA FLASH...
Thor2 is running on Windows of version 6.1
thor2.exe -mode vpl -maxtransfersizekb 1 -vplfile C:\RM-914\RM914_059S7H0_3058.5
0000.1425.0003_037.vpl
Process started Sun Dec 06 23:22:20 2015
Logging to file C:\Users\Marta\AppData\Local\Temp\thor2_win_20151206232220_Threa
dId-3864.log
Parsing VPL file C:\RM-914\RM914_059S7H0_3058.50000.1425.0003_037.vpl
Successfully parsed VPL
Flashing .ffu file RM914_3058.50000.1425.0003_RETAIL_eu_hungary_422_03_447211_pr
d_signed.ffu (SW version 3058.50000.1425.0003)
Debugging enabled for uefiflash
Initiating FFU flash operation
WinUSB in use.
isDeviceInNcsdMode
isDeviceInNcsdMode is false
Device mode 6 Uefi mode
[THOR2_flash_state] Pre-programming operations
Disable timeouts
Get flashing parameters
Lumia Boot Manager detected
Check status of battery
State of charge 8, charging current 282
Protocol version 1.1 Implementation version 1.16
Detecting UEFI responder
HELLO success
Lumia Boot Manager detected
Check status of battery
State of charge 8, charging current 266
Protocol version 1.1 Implementation version 1.16
Booting to FlashApp
Reboot to FlashApp command sent successfully.
DetachFrom connection
Verifying that device is online
Device is online
Detecting UEFI responder
HELLO success
Lumia Flash detected
Protocol version 1.15 Implementation version 1.28
Disable timeouts
Get flashing parameters
Lumia Flash detected
Protocol version 1.15 Implementation version 1.28
Size of one transfer is 2363392
Size of buffer is 2359296
Number of eMMC sectors: 15269888
Platform ID of device: Nokia.MSM8227.P6036.1.2
Async protocol version: 01
Security info:
Platform secure boot enabled
Secure FFU enabled
JTAG eFuse blown
RDC not found
Authentication not done
UEFI secure boot enabled
SHK enabled
Device supports FFU protocols: 0019
[THOR2_flash_state] Device programming started
Using secure flash method
CoreProgrammer version 2015.06.10.001.
Start programming signed ffu file C:\RM-914\RM914_3058.50000.1425.0003_RETAIL_eu
_hungary_422_03_447211_prd_signed.ffu
FfuReader version is 2015061501
Send FlashApp write parameter: 0x4d544f00
Perform handshake with UEFI...
Flash app: Protocol Version 1.15 Implementation Version 1.28
DevicePlatformInfo: Nokia.MSM8227.P6036.1.2
Unknown sub block detected. Skip...
Unknown sub block detected. Skip...
Supported protocol versions bitmap is 19
Secure FFU sync version 1 supported.
Secure FFU async version 1 supported.
Secure FFU async version 3 supported.
Get CID of the device...
Get EMMC size of the device...
Emmc size in sectors: 15269888
CID: Samsung, Size 7456 MB
Start charging...
Requested write param 0x43485247 is not supported by this flash app version.
Start charging... DONE. Status = 0
Unable to send ECHO REQ or ECHO REQ not supported
Get security Status...
Security Status:
Platform secure boot is enabled.
Secure eFUSE is enabled.
JTAG is disabled.
RDC is missing from the device.
Authentication is not done.
UEFI secure boot is enabled.
Secondary HW key exists.
Get RKH of the device...
RKH of the device is F771E62AF89994064F77CD3BC16829503BDF9A3D506D3FACECAEF3F808C
868FD
Get ISSW Version...
Get ISSW Version, SKIPPED!
Get system memory size...
Size of system mem: 524288 KB
Read antitheft status...
Requested read param 0x41545250 is not supported by this flash app version.
Send backup to RAM req...
Clearing the backup GPT...SKIPPED!
Successfully parsed FFU file. Header size: 0x000e0000, Payload size: 0x000000006
2900000, Chunk size: 0x00020000, Header offset: 0x00000000, Payload offset: 0x00
000000000e0000
RKH match between device and FFU file!
Option: Skip CRC32 check in use
Start sending header data...
FlashApp returned reported error in SecureFlashResp!
Status: 0x1106, Specifier: 0x8000000E
FA_ERR_FFU_SEC_HDR_VALIDATION_FAIL
Send of FFU header failed!
[IN] programSecureFfuFile. Closing C:\RM-914\RM914_3058.50000.1425.0003_RETAIL_e
u_hungary_422_03_447211_prd_signed.ffu
programming operation failed!
0xFA001106: Signature check of FFU file fails. Reason(s): The FFU file is not co
rrectly signed or not signed for this device.
Operation took about 3.00 seconds.
THOR2_ERROR_FA_SIGNATURE_FAIL
THOR2 1.8.2.18 exited with error code -100658938 (0xFA001106)
Here, after this step, if the flash is 100% succesful, the screen must change in Green,
mine finished with the same error: "The FFU file is not correctly signed or not signed for this device..."
I guess the most of us are into the same situation, I can't make the device to skip the signature check... Any sugestions?
have you jtag?
As far as I read, JTAG is a toolbox for repairing Phones which have the same problem, but what we are trying to do is without this toolbox, we have a dead phone at home. Microsoft said is a hardware failure and they must change complete motherboard, but with Jtag Toolbox can be repaired without change anything, just a complete writing of the bootloader and software. I don't want to buy the toolbox just to repair my Lumia 520, I don't need it, I'm just a home user not a repairing company...
melhisedec said:
As far as I read, JTAG is a toolbox for repairing Phones which have the same problem, but what we are trying to do is without this toolbox, we have a dead phone at home. Microsoft said is a hardware failure and they must change complete motherboard, but with Jtag Toolbox can be repaired without change anything, just a complete writing of the bootloader and software. I don't want to buy the toolbox just to repair my Lumia 520, I don't need it, I'm just a home user not a repairing company...
Click to expand...
Click to collapse
are you should to find testpoint for qcom9008. and flashing phone.
Mine was running everything give I install windows 10 just give the battery does not know dai was appearing this message (Erro Unable to find a bootable option error. Press any key to shut down,) Lumia 925 Brazil
---------- Post added at 03:41 AM ---------- Previous post was at 03:36 AM ----------
Mine was running everything give I install windows 10 just give the battery does not know dai was appearing this message (Erro Unable to find a bootable option error. Press any key to shut down)
Usually, is the main problem with Lumia Software update and stupid engineers from Microsoft does not fix it...
you deleted header partition, and lumia don't power on. help you only jtag.
I didn't know anything about this problem of almost any Lumia device until my phone has done the automatic software update from Win8 to 8.1 or 10, I don't know which one... And the the phone restarted with this stupid problem:
"ERROR: Unable to find a bootable option. Press any key to shut down"...
I have one week of searching over the internet to fix this but i couldn't make it...
If i can remove or unlock the bootloader, maybe I can force the phone to be Flashed with WDRT 1.34 and no more error:
"The FFU file is not correctly signed or not signed for this device."
melhisedec said:
I
Click to expand...
Click to collapse
Only you can help the programmer and all) nokia, wpinternals not flashing it. pins or seek to enter the 9008 regime (disassembly required).
partition table got off
i know this problems on my lumia 720(1 motheboard- After the firmware is not those files, 2 motherboards- After stitched sbl3 not true - died).
jtag helped to you, and me.
InsaneNutter said:
Hi,
Nope i could never fix the phone, I spent loads of time messing about with it however think it was a hardware related problem.
I've given it back to my friend and shes since got a new phone.
Click to expand...
Click to collapse
Cool. I had the same issue and many other issues with my 520. I have a very cool way of fixing this and all other issues if you struggle to start the phone up. If you are interested, let me know and I will explain to you. Very easy and process takes about 5 minutes.
Cheers
BruceKDallas said:
Cool. I had the same issue and many other issues with my 520. I have a very cool way of fixing this and all other issues if you struggle to start the phone up. If you are interested, let me know and I will explain to you. Very easy and process takes about 5 minutes.
Cheers
Click to expand...
Click to collapse
How did you do ?
melhisedec said:
As far as I read, JTAG is a toolbox for repairing Phones which have the same problem, but what we are trying to do is without this toolbox, we have a dead phone at home. Microsoft said is a hardware failure and they must change complete motherboard, but with Jtag Toolbox can be repaired without change anything, just a complete writing of the bootloader and software. I don't want to buy the toolbox just to repair my Lumia 520, I don't need it, I'm just a home user not a repairing company...
Click to expand...
Click to collapse
Did you follow http://forum.xda-developers.com/showthread.php?t=2515453 correctly?
InsaneNutter said:
A friend has asked me to look at this Nokia Lumia 520, apparently it turned on one day and displayed this error message "unable to find a bootable option. Press any key to shutdown"
Nokia Software Update for Retial recognises the phone and says software can be installed:
This downloads fine and starts the install process, however always fails with the message "phone not supported by nokia software updater retail"
I have also tried using NaviFirm+, searching for the product code 059S3T5 which lets me download the RM914_3058.50000.1425.0006_RETAIL_eu_euro1_327_06_452364_prd_signed firmware.
However i'm unable to flash this with the Nokia Care Suite, it states: 0xFA001106: Signature check of FFU file fails. Reason(s): The FFU file is not correctly signed or not signed for this device.
Has anyone got any suggestions on what else i can try to flash this firmware? or to try fix the phone?
I was following the tutorial here Flash/unbrand Lumia devices thinking if the firmware was re flashed all would be fine.
Cheers for any advice
Click to expand...
Click to collapse
hy bro try this...... http://forum.gsmhosting.com/vbb/f67...mc-error-unable-find-bootable-option-1931094/ i have sucses
feherneoh said:
I have seen this error millions of times on 520, and could fix it always
what you'll need:
PC
micro USB cable
WPInternals
.hex loader for 520
.ffu for 520
T4 screwdriver
Small wire
All you have to do is to short the resistor on eMMC clock lane, and connect USB, phone will be in emergency mode. You can either select unlock or relock in WPInternals, but for unlock, be sure to use an SBL3, because that won't fix the problem on its own.
The best would be selecting relock, then flashing the ffu, so EFIESP gets fixed
If you need help finding that resistor, PM me
Click to expand...
Click to collapse
Ok, so I found the resistor on a picture in another forum - so I just short it out and connect to USB while still shorted?
Hello, first of all, sorry for any typing error, english is not my first language but i will try to make this easy to understand.
I possess a Nokia Lumia 920. As you all know, the Lumia 920 wasn't update to WM 10 and i was stuck to WP8.1.
I follow a tutorial from this website to unlock the bootloader and enable root acess to change the configurations to be able to update to WM10. It work perfectly and i was using until saturday.
Saturday i use Windows Device Recovery Tool to go back to WP8.1 to be able to use the oficial version instead of the fast-ring version that i was in it. I downgrade sucessfully and i was doing the the steps to unlock the bootloader. Was the same process and nothing unusuall.
When i soft-reset the phone, i notice that the Wifi, Bluetooth and Data wasn't working and i was unable to fix that.
Thing that i try to do
Soft-reset
Hard-reset
Flash a FFU file using WP internal
And when i try to use the Windows Device Recovery Tool, i show me this error:
Error
Error Reading your phone information
It wasn't possible read the information.
Details:
Could not read ProductCode or ProductType
I already try the other option from undetected phone on WDRT but doesn't work to.
Looking at the WDRT log i found this:
Microsoft.WindowsDeviceRecoveryTool.LogicCommon.Services.MsrReportingService | Warning | Could not provide report upload url using params: {{"fileName":"20161218115639_48_RM 821__.xml","manufacturerName":null,"manufacturerProductLine":null,"reportClassification":"Public"}} |
Microsoft.WindowsDeviceRecoveryTool.LogicCommon.Services.MsrReportingService | Information | Try use manufacturer extracted data for getting upload url |
Currently my phone is basicaly bricked.
Any ideas or sugestions are welcome.
Thank You.
Your phone DPP Parition may be damaged.
You can fix it if you have full backup of your phone. Or dpp backup otherwise you cant get anything working (ril,wifi,bt data) or may be camera but not sure about camera
Sent from mTalk
Hi all! Please Help me. My lumia dead?! Error flashed?! How to flash my imei number? my phone wifi ok, camera ok, bluetooth ok, internet ok.
Telephone funkcione off. Not sim detected, Please Look 2 picture screen:
1 photo:
windows phone internal pictuer, imei not found
2. photo:
windows phone 10 rom not imei
Please help, how to full flash image and repaired imei number?
--------------------------------------------------------------------
how can i reset the imei number with what installation? do you want to make money?
-------------------------------------------------------------------------------------------
Hi,
you should make an nvi_update:
thor2 -mode uefiflash -ffufile "[your ffu-file]" -do_full_nvi_update
thor2.exe is found in your Windows Device Recovery Tool (-> Google) path. You must use it on
Hi! Thanks you help! I'll try it. Wait, thanks.
JoachimP said:
Hi,
you should make an nvi_update:
thor2 -mode uefiflash -ffufile "[your ffu-file]" -do_full_nvi_update
thor2.exe is found in your Windows Device Recovery Tool (-> Google) path. You must use it on
Click to expand...
Click to collapse
Hi! Tested you make command:
thor2 -mode uefiflash -ffufile "e:\lumia\RM-1116\RM1116_1078.0053.10586.13169.15248.034EBC_retail_prod_signed.ffu" -do_full_nvi_update
flashed ok, imei crashed, not updated nvi. "0" Look the new picture the links, the windows phone internal program:
1
https://files.fm/u/ds4zjhk86#/view/e8zbnrhuy
picture 2
https://files.fm/u/quxu9z8y4
Not imei not founded.
Found the meid?! --what?
ims not registered.
Airpalnet mode online nov, not off, not wifi 5ghzm, blocked.
Wifi 2,4ghz ok.
-------------------------------------------------------------------------
there is a program that can reset the imei number????
My lumia product code:
059X4W6
type hungarian.
Look the youtube video. how to download tthe program?
Tool repair Imei Lumia
Thanks You comment! Like.
i am hungarian.
Marton35 said:
Hi! Tested you make command:
thor2 -mode uefiflash -ffufile "e:\lumia\RM-1116\RM1116_1078.0053.10586.13169.15248.034EBC_retail_prod_signed.ffu" -do_full_nvi_update
flashed ok, imei crashed, not updated nvi. "0" Look the new picture the links, the windows phone internal program:
1
https://files.fm/u/ds4zjhk86#/view/e8zbnrhuy
picture 2
https://files.fm/u/quxu9z8y4
Not imei not founded.
Found the meid?! --what?
ims not registered.
Airpalnet mode online nov, not off, not wifi 5ghzm, blocked.
Wifi 2,4ghz ok.
-------------------------------------------------------------------------
there is a program that can reset the imei number????
My lumia product code:
059X4W6
type hungarian.
Look the youtube video. how to download tthe program?
Tool repair Imei Lumia
Thanks You comment! Like.
i am hungarian.
Click to expand...
Click to collapse
hi bro,try this one,may help you: