Related
How to Root Samsung Galaxy J7 (2016), Install TWRP, Custom Rom & Xposed Framework on Samsung Galaxy J7 2016 (SM-J710F/FN/GN/MN/K)
Disclaimer
Your warranty is now void.
I am not responsible for any bricked devices.
Preparation for ROOTING J7 (2016) :
Enable USB Debugging on your J7 (2016)
This is very important thing to be done before you try flashing a firmware or recovery file. USB Debugging mode make Android devices receptive to download and send data over USB cable connection. If you do not know how to turn debugging mode ON, do this :
In your ROM, go to Settings -> About device. Tap 7 times on Build number to enable Developer options.
You will see a message that “Developer mode has been enabled” on your device.
Now go to Settings -> Developer options : Tap it and go to USB debugging option and check the box to enable it.
In the ‘Developer Option’ you will also find the ‘OEM Unlocking’ option, just enable it. (You need to enable OEM unlock, Otherwise you might end up with boot problems or be unable to flash later on)
Install Samsung Android USB Driver for Windows to your Laptop/PC, Then connect your Samsung Galaxy J7 (2016) with USB cable. It will configure driver automatically.
How to ROOT Samsung Galaxy J7 (2016) :
1.] Download Odin, TWRP Recovery, Custom Kernel & SuperSU file to your Laptop/PC.
2.] Turn off your phone, Go to download mode (by pressing Volume down+Home+Power buttons at the same time for about 6-8 seconds).
3.] Press the Volume up button to continue.
4.] Open the ODIN file and run you downloaded on your Laptop/PC.
5.] Connect your phone to your Laptop/PC through orignal USB cable.
6.] When ODIN detects your phone, It will show added in the Log.
7.] In ODIN click on AP and then select the official twrp recovery file (TWRP-3.0.2-1-j7xelte.img.tar. under Options tab disable Auto Reboot. Click on start, The flashing process will start. Once the flash is complete, Now exit Odin and disconnect your J7 from USB cable, you can pull the battery then place the battery back in.
Known Issues :- Samsung encryption is not supported yet in TWRP 3.0.2.0
8.] This step is alternative not necessary (If you want to disabled dm-verity & encryption, another words if you want to mount Internal Storage in TWRP, So do it) :
Go to download mode again and Open ODIN click on AP and the select Stock based custom kernel (SM-J710F-Kernel-6.0.1-nodmv.tar) under Options tab disable Auto Reboot. Click on start, The flashing process will start. Once the flash is complete, Now exit Odin and disconnect your J7 from USB cable, you can pull the battery then place the battery back in again.
Note 1 :- As per my experiences, it is recommended to flash the Kernel, then recovery and then "FORMAT DATA" (not only wipe) to disable encryption. Otherwise, TWRP will not be able to mount /data.
Note 2 :- If you want to keep encryption (are you official lover), simply flash official twrp recovery and then flash SuperSU package via TWRP, The result would be that TWRP is mount External SD card and OTG so don't worry and flash only official TWRP. (Follow all steps for rooting your J7 2016 by official method, ONLY skip step no. 8 and 11).
9.] If the flashing succeeds, ODIN will show 'PASS'. That means the recovery flashed successfully. It will boot into recovery.
10.] Swipe to Allow Modifications. Click on Reboot.
11.] This step is alternative (If you followed step no. 8, so then do it) :
Swipe to Allow Modifications. Click on Reboot. Go to Wipe > Format Data > "yes" ...Ok Click on Reboot.
12.] Copy and place downloaded SuperSU v2.78 zip file to your Internal OR External SD card.
13.] Turn off your phone, Reboot to recovery (by pressing Volume up+Home+Power buttons).
14.] The recovery will start. Select 'install zip'.
15.] Go to and select SuperSU v2.78 zip which you downloaded. Swipe to Confirm Flash. Flashing process will start. Once Completed. Wipe Cache/dalvik, Click on Reboot.
16.] After it finishes, go back and reboot your phone.
ENJOY your rooted Samsung Galaxy J7 (2016) !!
SuperSU Issues installing/updating binaries : If you want to update binary files or Root 100% your Galaxy J7 2016 follow my steps :
Open SuperSU app and go to setting -> Scroll down -> Full unroot -> Reboot automatically.
Then again rebooted TWRP -> Install zip -> Flashed SuperSU v2.46.zip -> Click on Reboot.
Open Playstore and thne Update SuperSU.
Open SuperSU -> Click on Continue -> Select TWRP/CWM -> Ok -> Reboot automatically.
ENJOY your full Rooted Samsung Galaxy J7 (2016) !!
Install Custom ROM :
Comming SOON...
Install Xposed Framework on J7 (2016) :
Most Android users mainly root their devices only to install Xposed Framework. Xposed Framework is a powerful tool that enables you to modify your ROM as you wish using some tweaks. Xposed Framework can be installed not only on Custom ROMS but also on the Stock ROMS. So using Xposed you can add some tweaks to your Stock ROM or firmware and get the features of a custom ROM.
Official build of Xposed framework for Marshmallow Samsung Galaxy Devices has not been released yet, since Samsung made a lot of changes to ART (Android Runtime) without providing the sources. So we have the unofficial build now and we need to flash the Framework (SDK.zip) rather than just installing the Apk like in other versions of android so as Jelly Bean and Kitkat (Where the Xposed installer apk file would install the framework on your system automatically.
Preparation for Install Xposed :
Make a nandroid backup using TWRP (in case if anything goes wrong) before installing Xposed Framework.
With the Nandroid backup (which is an excellent feature on custom recoveries like TWRP) you can backup all your current state of your operating system on your device and save it in your SD card or on your Computer storage and restore it at anytime you want. Many people will have perplexity that, If their Stock ROM (Firmware/OS) is rooted would it be able to do a backup of their OS and can able to restore it?. Yes you can do backup of the current state of your firmware with the custom recoveries like TWRP no matter your OS is rooted and made changes by using root.
Steps to to install the Xposed Framework for Galaxy J7 (2016) :
1. Install Xposed Installer App (Xposed Installer 3.0 alpha 4)
2. Download & copy the Xposed file and the Xposed Uninstaller to your Internal or SDcard
3. Go to TWRP select Install and navigate to Xposed file "xposed-vxx-sdk23-tw-arm-custom-build-by-wanam-xxxxxxxx.zip" Make sure you select the storage as Micro SDcard in the above when you navigate to find the Xposed Framework file to flash (install through TWRP).
4. Reboot It takes a little time to boot up as it want to update our Android System.
Enjoy the Xposed framework on your Samsung Galaxy J7 (2016) !!
How to use Xposed Installer :
1. Go to Xposed installer app on your phone and select Download.
2. Download and install the different modules you want to tweak your phone. After downloading a modules please don't open the app untill you enable it on Xposed framework by going to Module section on xposed installer app and selecting it on the check box there. Then retstart your phone to use the module you have installed.
All the Xposed modules listed on the download section won't work for Samsung Marshmallow Stock based Roms. Please refer the the screen shot above to see the Modules that I use on Xposed framework.
Credits :
Actualy me @KeMii
@jcadduono for making official TWRP Recovery.
@vaibhavpandeyvpz for making stock based kernel.
@Chainfire for the awesome SuperSU.
@rovo89 @wanam for xposed frameworks
If i didnt mention you and used your work please kindly forgive me and pm me to fix it right away.
Required Files for Download :
1. Samsung USB Driver for Window
2. Odin3 v3.11.1.zip
3. Galaxy J7 ⑥ ROOT by KeMii (All files Included)
OR
(a) Official TWRP Recovery - TWRP-3.0.2-1-j7xelte.img.tar
(b) Stock based Kernel - SM-J710F-Kernel-6.0.1-nodmv.tar
(c) UPDATE-SuperSU-v2.46
(d) UPDATE-SuperSU-v2.78-20160905010000
4. Xposed Installer App, Installer & Unistaller zip files.
OR
Xposed custom build by Wanam
No you don't need to enable USB debugging it has nothing to do with anything outside the system OS. No affect on download mode nor recovery whatsoever. It can be useful for debugging late boot issues though if you ever run into them later on.
As an alternative to flashing the kernel tar in Odin, users can also format their data (or just use an sdcard) in twrp then extract the boot.img from the tar and copy it to twrp using MTP, then flash the boot.img using flash image feature in the install page.
(Used normally when users distribute kernels as .img not .tar)
If users don't want to root or change their kernel, they can flash no-verity-opt-encrypt zip in twrp to just disable the integrity checks broken by swiping to enable modifications in twrp.
Also if you don't have an sdcard but want to keep your data encrypted you can use the cache partition to store small files!
adb push filename /cache/
They can be flashed from there.
jcadduono said:
No you don't need to enable USB debugging it has nothing to do with anything outside the system OS. No affect on download mode nor recovery whatsoever. It can be useful for debugging late boot issues though if you ever run into them later on.
As an alternative to flashing the kernel tar in Odin, users can also format their data (or just use an sdcard) in twrp then extract the boot.img from the tar and copy it to twrp using MTP, then flash the boot.img using flash image feature in the install page.
(Used normally when users distribute kernels as .img not .tar)
If users don't want to root or change their kernel, they can flash no-verity-opt-encrypt zip in twrp to just disable the integrity checks broken by swiping to enable modifications in twrp.
Also if you don't have an sdcard but want to keep your data encrypted you can use the cache partition to store small files!
adb push filename /cache/
They can be flashed from there.
Click to expand...
Click to collapse
Thank you sir for extra information and correcting me. Have the best day @jcadduono. :good:
?????? go go go for the custom Rom
Hi everyone! Thx for the guide!
I have a question: its really needed to change Kernel..? Cant we flash just TWRP recovery and then flash SuperSU..?
Thx!
revenat said:
Hi everyone! Thx for the guide!
I have a question: its really needed to change Kernel..? Cant we flash just TWRP recovery and then flash SuperSU..?
Thx!
Click to expand...
Click to collapse
Not necessarily. But you won't be able to mount internal storage. Its mentioned in the post too
Me_Ashish_ said:
Not necessarily. But you won't be able to mount internal storage. Its mentioned in the post too
Click to expand...
Click to collapse
Hi, thx for reply! I just read it, i miss it the first time, my bad!
So, if i cant mount InternalSD on TWRP recovery what problem can i found..?
I think i will not be able to use backup opcion right..?
Thx again for reply and help!!!
Guys, can someone tell me wich is the difference between "Stock Kernel (original)" and the "Stock Kernel (modified)" ..? Thx very much!
Screenshot for working modules on MM (samsung)
KeMii said:
How to Root Samsung Galaxy J7 (2016), Install TWRP, Custom Rom & Xposed Framework on Samsung Galaxy J7 2016 (SM-J710F/FN/GN/MN/K)
All the Xposed modules listed on the download section won't work for Samsung Marshmallow Stock based Roms. Please refer the the screen shot above to see the Modules that I use on Xposed framework.
Click to expand...
Click to collapse
where are the screeshots ?
nice work bro and nice dp, waiting for some custom roms like note 7 for daily use neat n clean rom, appreciate your hard work and writing such a long post
Can I use this for j700t?
Sent from my SM-J700T using Tapatalk
Thanks...nice tutorial
Can this be used for the J7 700M Duo Sim? 2016 version? Thanks
KeMii said:
Thank you sir for extra information and correcting me. Have the best day @jcadduono. :good:
Click to expand...
Click to collapse
Now, i'm using J710FXXU1API3-J710FOLB1APE2 ROM on my J7 2016 and i tried decrypt kernel of previous ROM but wifi did not work. Do you have new kernel for J710FXXU1API3 ?
KeMii said:
How to Root Samsung Galaxy J7 (2016), Install TWRP, Custom Rom & Xposed Framework on Samsung Galaxy J7 2016 (SM-J710F/FN/GN/MN/K)
Disclaimer
Your warranty is now void.
I am not responsible for any bricked devices.
Preparation for ROOTING J7 (2016) :
Enable USB Debugging on your J7 (2016)
This is very important thing to be done before you try flashing a firmware or recovery file. USB Debugging mode make Android devices receptive to download and send data over USB cable connection. If you do not know how to turn debugging mode ON, do this :
In your ROM, go to Settings -> About device. Tap 7 times on Build number to enable Developer options.
You will see a message that “Developer mode has been enabled” on your device.
Now go to Settings -> Developer options : Tap it and go to USB debugging option and check the box to enable it.
In the ‘Developer Option’ you will also find the ‘OEM Unlocking’ option, just enable it. (You need to enable OEM unlock, Otherwise you might end up with boot problems or be unable to flash later on)
Install Samsung Android USB Driver for Windows to your Laptop/PC, Then connect your Samsung Galaxy J7 (2016) with USB cable. It will configure driver automatically.
How to ROOT Samsung Galaxy J7 (2016) :
1.] Download Odin, TWRP Recovery, Custom Kernel & SuperSU file to your Laptop/PC.
2.] Turn off your phone, Go to download mode (by pressing Volume down+home+power buttons at the same time for about 6-8 secs).
3.] Press the Volume up button to continue.
4.] Open the ODIN file and run you downloaded on your Laptop/PC.
5.] Connect your phone to your laptop/PC through USB cable.
6.] When ODIN detects your phone, It will show added in the Log.
7.] In ODIN click on AP and then select the official twrp recovery file (TWRP-3.0.2-1-j7xelte.img.tar) under Options tab disable Auto Reboot. Click on start, The flashing process will start. Once the flash is complete, Now exit Odin and disconnect your J7 from USB cable, you can pull the battery then place the battery back in.
Known Issues :- Samsung encryption is not supported yet in TWRP 3.0.2.0
8.] This step is alternative (If you want to disabled dm-verity & encryption another words if you want to mount Internal Storage in TWRP, So do it) :
Go to download mode again and Open ODIN click on AP and the select Stock based custom kernel (SM-J710F-Kernel-6.0.1-nodmv.tar) under Options tab disable Auto Reboot. Click on start, The flashing process will start. Once the flash is complete, Now exit Odin and disconnect your J7 from USB cable, you can pull the battery then place the battery back in.
Note 1 :- As per my experiences, it is recommended to flash the Kernel, then recovery, then "FORMAT DATA" (not just wipe) to disable encryption. Otherwise, TWRP will not be able to mount /data.
Note 2 :- If you want to keep encryption, simply flash official twrp recovery and then flash SuperSU package via TWRP (Follow these steps for rooting your J7 by official method, step no. 1-7, 9-10 and 12-16. And skip step no. 8 and 11).
9.] If the flashing succeeds, ODIN will show 'PASS'. That means the recovery flashed successfully. It will boot into recovery.
10.] Swipe to Allow Modifications. Click on Reboot.
11.] This step is alternative ( If you followed step no. 8, so do it ) :
Swipe to Allow Modifications. Click on Reboot. Go to Wipe > Format Data > "yes" ...Ok Click on Reboot.
12.] Copy and place downloaded SuperSU v2.78 zip file to your Internal OR External SD card.
13.] Turn off your phone, Reboot to recovery (by pressing Volume up+Home+Power buttons).
14.] The recovery will start. Select 'install zip'.
15.] Go to and select SuperSU v2.78 zip which you downloaded. Swipe to Confirm Flash. Flashing process will start. Once Completed. Wipe Cache/dalvik, Click on Reboot.
16.] After it finishes, go back and reboot your phone.
ENJOY your rooted Samsung Galaxy J7 (2016) !!
SuperSU Issues installing / updating binaries : If you want to update binary files or Root 100% your Galaxy J7 2016 follow my steps :
Open SuperSU app and go to setting -> Scroll down -> Full unroot -> Reboot automatically.
Then again rebooted TWRP -> Install zip -> Flashed SuperSU v2.46.zip -> Click on Reboot.
Open Playstore and thne Update SuperSU.
Open SuperSU -> Click on Continue -> Select TWRP/CWM -> Ok -> Reboot automatically.
ENJOY your full Rooted Samsung Galaxy J7 (2016) !!
Install Custom ROM :
Comming SOON...
Install Xposed Framework on J7 (2016) :
Most Android users mainly root their devices only to install Xposed Framework. Xposed Framework is a powerful tool that enables you to modify your ROM as you wish using some tweaks. Xposed Framework can be installed not only on Custom ROMS but also on the Stock ROMS. So using Xposed you can add some tweaks to your Stock ROM or firmware and get the features of a custom ROM.
Official build of Xposed framework for Marshmallow Samsung Galaxy Devices has not been released yet, since Samsung made a lot of changes to ART (Android Runtime) without providing the sources. So we have the unofficial build now and we need to flash the Framework (SDK.zip) rather than just installing the Apk like in other versions of android so as Jelly Bean and Kitkat (Where the Xposed installer apk file would install the framework on your system automatically.
Preparation for Install Xposed :
Make a nandroid backup using TWRP (in case if anything goes wrong) before installing Xposed Framework.
With the Nandroid backup (which is an excellent feature on custom recoveries like TWRP) you can backup all your current state of your operating system on your device and save it in your SD card or on your Computer storage and restore it at anytime you want. Many people will have perplexity that, If their Stock ROM (Firmware/OS) is rooted would it be able to do a backup of their OS and can able to restore it?. Yes you can do backup of the current state of your firmware with the custom recoveries like TWRP no matter your OS is rooted and made changes by using root.
Steps to to install the Xposed Framework for Galaxy J7 (2016) :
1. Install Xposed Installer App (Xposed Installer 3.0 alpha 4)
2. Download & copy the Xposed file and the Xposed Uninstaller to your Internal or SDcard
3. Go to TWRP select Install and navigate to Xposed file "xposed-vxx-sdk23-tw-arm-custom-build-by-wanam-xxxxxxxx.zip" Make sure you select the storage as Micro SDcard in the above when you navigate to find the Xposed Framework file to flash (install through TWRP).
4. Reboot It takes a little time to boot up as it want to update our Android System.
Enjoy the Xposed framework on your Samsung Galaxy J7 (2016) !!
How to use Xposed Installer :
1. Go to Xposed installer app on your phone and select Download.
2. Download and install the different modules you want to tweak your phone. After downloading a modules please don't open the app untill you enable it on Xposed framework by going to Module section on xposed installer app and selecting it on the check box there. Then retstart your phone to use the module you have installed.
All the Xposed modules listed on the download section won't work for Samsung Marshmallow Stock based Roms. Please refer the the screen shot above to see the Modules that I use on Xposed framework.
Credits :
Actualy me @KeMii
@jcadduono for making official TWRP Recovery.
@vaibhavpandeyvpz for making stock based kernel.
@Chainfire for the awesome SuperSU.
@rovo89 @wanam for xposed frameworks
If i didnt mention you and used your work please kindly forgive me and pm me to fix it right away.
Required Files for Download :
1. Samsung USB Driver for Window
2. Odin3 v3.11.1.zip
3. Galaxy J7 ⑥ ROOT by KeMii
OR
(a) Official TWRP Recovery - TWRP-3.0.2-1-j7xelte.img.tar
(b) Stock based Kernel - SM-J710F-Kernel-6.0.1-nodmv.tar
(c) UPDATE-SuperSU-v2.46
(d) UPDATE-SuperSU-v2.78-20160905010000
4. Xposed Installer App, Installer & Unistaller zip files.
OR
Xposed custom build by Wanam
Click to expand...
Click to collapse
Nice kemii super.......
Sent from my SM-J710F using XDA-Developers mobile app
jcadduono said:
No you don't need to enable USB debugging it has nothing to do with anything outside the system OS. No affect on download mode nor recovery whatsoever. It can be useful for debugging late boot issues though if you ever run into them later on.
As an alternative to flashing the kernel tar in Odin, users can also format their data (or just use an sdcard) in twrp then extract the boot.img from the tar and copy it to twrp using MTP, then flash the boot.img using flash image feature in the install page.
(Used normally when users distribute kernels as .img not .tar)
If users don't want to root or change their kernel, they can flash no-verity-opt-encrypt zip in twrp to just disable the integrity checks broken by swiping to enable modifications in twrp.
Also if you don't have an sdcard but want to keep your data encrypted you can use the cache partition to store small files!
adb push filename /cache/
They can be flashed from there.
Click to expand...
Click to collapse
awesome man... got that.. thanks
Help me
I have already flashed my samsung j7 2016 with twrp recovery and have installed su... but i didnt flash custom kernel.. my internal storage is not shown in the recovery screen... what to do now?
saddam.khan999 said:
where are the screeshots ?
nice work bro and nice dp, waiting for some custom roms like note 7 for daily use neat n clean rom, appreciate your hard work and writing such a long post
Click to expand...
Click to collapse
Thank you @saddam.khan99 We are working on Note 7 rom for J7'6 and some new custom rom comming soon. Stay with us.
coolzone4u said:
Thanks...nice tutorial
Click to expand...
Click to collapse
Thanks...
densukke said:
Can this be used for the J7 700M Duo Sim? 2016 version? Thanks
Click to expand...
Click to collapse
No... because J700M is J7 2015.
Go here and read this article How to Root J7 J700F/H/M :-
http://forum.xda-developers.com/galaxy-j7/themes/how-to-root-twrp-install-xposed-t3328580
chinhlevn said:
Now, i'm using J710FXXU1API3-J710FOLB1APE2 ROM on my J7 2016 and i tried decrypt kernel of previous ROM but wifi did not work. Do you have new kernel for J710FXXU1API3 ?
Click to expand...
Click to collapse
I saw your problem, Lagging and wifi errors is comming because of modified kernel is outdated and its need to some modification to fix it but unfortunately this work has been stopped. So now do not use it.
Don't have to worry anymore because official TWRP is released, this recovery External storage and OTG mounted so now don.t need Modified kernel at the last use only official TWRP Recovery. :good:
First of all I would like to say that this is a revised version of an earlier guide which focused on xposed together with goodix. Since Magisk 11.1 was released we can now have systemless superuser and xposed on this rom without much trouble. I will also list steps for F2FS on data/cache but I won't be doing a guide for those of you with roms without Radon kernel built in because it is a pain in the you know what and I already laid out the steps in a previous guide.
So, first of all here are the things that you will need:
Links at bottom of page
a) Any version of Resurrection Remix 5.7.4 for those of you using EXT4.
b) My version of Resurrection Remix FK 5.7.4 with Radon built in for those of you using F2FS
c) gapps
d) Supersu 2.79SR3
e) Magisk 11.1 zip
f) Magisk Manager apk or internet access to download from Play Store
g) Xposed v87 johnwu edition (systemless)
h) Xposed material apk
i) Radon kernel installer
j) goodix patch for goodix fingerprint users
k) Arise swansong installer (I am using v2.90 at the moment without issue)
For those of you using F2FS follow these steps first:
Make sure you are using my version of Resurrection Remix 5.7.4 with Radon built in. See above.
a. Using a F2FS compatible recovery such as Strix M4-0, wipe all partitions.
b. Convert data and cache to F2FS - in TWRP > Wipe > Advanced Wipe > Choose data partition > change filesystem > F2FS
c. Repeat step b for cache partition
d. Go to settings in TWRP and check "use rm -rf instead of formatting"
e. Continue to step 2a.
Now let's get to the steps to get this up and running:
1. If you are using EXT4 for data/cache go ahead and wipe all partitions and format data
2a. Install ROM + Gapps and reboot to system. Wait for setup screen to appear and reboot to recovery. Goodix users go to step 3. FPC users go to step 2b.
---------------------
2b. This step is only for F2FS users with FPC fingerprint sensor. If you have a FPC fingerprint sensor and want to stay on stock kernel you can skip this step and go to step 3. Install radon kernel then reboot to system. Wait for setup screen to appear and reboot to recovery.
---------------------
3. Install Supersu 2.79SR3 and reboot to system. Wait for setup screen to appear and reboot to recovery. (this step will block magisk from installing it's own implementation of superuser which currently does not allow a proper interactive shell in terminal)
4. Install Magisk 11.1 first and Xposed johnwu second using add zips. Reboot to system and allow setup screen to appear.
---------------------
If you have a goodix fingerprint sensor complete steps 5a - 5c. If not continue to step 5d.
5a. Reboot to recovery.
5b. Install goodix_fp_8.zip first and Radon 3.9/4.0 second using add zips (choose goodix). Reboot to system. Wait for setup screen to appear and reboot to recovery.
5c. Install supersu 2.79SR3 again. Reboot to system. (goodix patch will break supersu so this is necessary for goodix users)
----------------------
5d. Complete setup and install Magisk Manager from play store or apk.
6. Install Xposed material apk.
7. Done! For Arise audio continue to step 8.
---------------------
8. Open "AudioFX" app. Toggle the "on" switch to the "off" position.
9. Go to Settings > Apps and find "AudioFX." Click on it then click the disable button. Reboot to recovery.
10. Install Arise zip. Reboot to system.
11. Done!
Right now I have only tested a few things because there are so many options in the Arise installer. Don't use the "remove deep buffer" option because it presented issues for me and is unnecessary on this phone. Right now I am using Viper4Arise 2.5.0.5 with the default ICE audio configuration and default ICE preset. Everything else was skipped except the option to repair sd card permissions (why not?).
--------------------
Note: To pass safety net check install Xposed module "No Device Check."
--------------------
Links:
Strix m4-0 recovery - https://www.androidfilehost.com/?fid=24591000424943818
Resurrection Remix 5.7.4 FK with Radon - https://drive.google.com/file/d/0B2w-p-CP_G3FSFJ1Z01mZXJxRmM/view?usp=drivesdk
Opengapps - http://opengapps.org
Magisk 11.1 - http://tiny.cc/latestmagisk
Xposed v87 johnwu - https://forum.xda-developers.com/attachment.php?attachmentid=3951049&d=1480319667
Xposed material apk - http://forum.xda-developers.com/devdb/project/dl/?id=21776&task=get
Supersu 2.79SR3 - https://download.chainfire.eu/1021/SuperSU/SR3-SuperSU-v2.79-SR3-20170114223742.zip
Goodix patch - https://drive.google.com/file/d/0B2w-p-CP_G3FdVBZWk8wdXhDcEU/view?usp=drivesdk
Radon kernel - https://forum.xda-developers.com/redmi-note-3/development/kernel-t3414884
Arise Swansong v2.90 - https://www.androidfilehost.com/?fid=817550096634749747
I will not be answering too many questions here. The instructions are very clearly laid out.
Awesome dude , please try to make guide for Nitrogen OS [emoji4]
Sent from my Redmi Note 3 using Tapatalk
VaibhavKumar07 said:
Awesome dude , please try to make guide for Nitrogen OS [emoji4]
Sent from my Redmi Note 3 using Tapatalk
Click to expand...
Click to collapse
I'm probably not moving to nougat. Sorry.
Thanks a lot bro will soon try and report back
Sent from my YU5510 using Tapatalk
2KXda said:
Thanks a lot bro will soon try and report back
Sent from my YU5510 using Tapatalk
Click to expand...
Click to collapse
No problem. Hope it helps.
easy guide, and is just what i was looking for. I also use Android N-ify for xposed. Anything else you recommand? and thanks for this =) works really well
Ok this setup is great have been using for 3 weeks now but is there a way to get VoLTE working on this rom??
Sent from my Redmi Note 3 using Tapatalk
Im not responsable for hard bricks/ soft bricks on youre devices do at your own risk
I already test it and works on my rooted ms428
I want to give a special thanks to the devs for the patience, dedication and for working hard to make the root possible for this device
Its highly recommended to perform a nan-backup incase of an emergency or incase if you want to go back
The steps are quite simple
1) root your device, if you dont have it rooted here is the link for the steps to root for the lg k10 both metropcs and T-Mobile editions only
(forum.xda-developers.com/lg-k10/development/root-twrp-rom-t-mobile-k428-k10-t3582493)
2) install magisk manager on playstore
3) open magisk manager and install the zip file via automatic
4) boot into twrp and flash the zip file located in magisk folder
5) once it done wipe cache and dalvik cache
6) once it finish booting open magisk manager and click on downloads tab
7) install on magisk xposed framework sdk23 (marshmallow) *note if you have lollipop its the sdk22
8) once it finished click on reboot later, boot into twrp and wipe dalvik cache and cache and reboot
9)install xposed apk (its the one i use on my ms428 forum.xda-developers.com/xposed/material-design-xposed-installer-t3137758)
10) enjoy
See it for your self ?
itztropic- after I rooted I just downloaded the xposed framework from the website normally and it worked properly, I must be not understanding something about the method you described?
I don't really understand what magisk is for I thought it was a developer tool of some sort (which i'm not)
leopard_fist said:
itztropic- after I rooted I just downloaded the xposed framework from the website normally and it worked properly, I must be not understanding something about the method you described?
I don't really understand what magisk is for I thought it was a developer tool of some sort (which i'm not)
Click to expand...
Click to collapse
Magisk is a frontend designed to manage apps and modules that use systemless capabilities. It has its own superuser based on phh's superuser, and features modules much like Xposed, though some are useful even on Nougat. Xposed can be installed systemless as well and Magisk can disable and re-enable root and Xposed on the fly, as well as its modules, so you can have a rooted phone and still use Android Pay and Pokemon Go.
ItzTropic said:
Im not responsable for hard bricks/ soft bricks on youre devices do at your own risk
I already test it and works on my rooted ms428
I want to give a special thanks to the devs for the patience, dedication and for working hard to make the root possible for this device
Its highly recommended to perform a nan-backup incase of an emergency or incase if you want to go back
The steps are quite simple
1) root your device, if you dont have it rooted here is the link for the steps to root for the lg k10 both metropcs and T-Mobile editions only
(forum.xda-developers.com/lg-k10/development/root-twrp-rom-t-mobile-k428-k10-t3582493)
2) install magisk manager on playstore
3) open magisk manager and install the zip file via automatic
4) boot into twrp and flash the zip file located in magisk folder
5) once it done wipe cache and dalvik cache
6) once it finish booting open magisk manager and click on downloads tab
7) install on magisk xposed framework sdk23 (marshmallow) *note if you have lollipop its the sdk22
8) once it finished click on reboot later, boot into twrp and wipe dalvik cache and cache and reboot
9)install xposed apk (its the one i use on my ms428 forum.xda-developers.com/xposed/material-design-xposed-installer-t3137758)
10) enjoy
Click to expand...
Click to collapse
Don't re-create threads when they are already present. LG K10 ROMS, KERNELS, RECOVERIES, & OTHER DEVELOPMENT is not the place to post these kinds of things.
There is already a thread for Xposed: https://forum.xda-developers.com/lg-k10/how-to/guide-xposed-lg-k10-t3505970.
Post it there. Delete this thread.
GuyInDogSuit said:
Magisk is a frontend designed to manage apps and modules that use systemless capabilities. It has its own superuser based on phh's superuser, and features modules much like Xposed, though some are useful even on Nougat. Xposed can be installed systemless as well and Magisk can disable and re-enable root and Xposed on the fly, as well as its modules, so you can have a rooted phone and still use Android Pay and Pokemon Go.
Click to expand...
Click to collapse
Thanks for the explanation-also Overdrive took some time via pm to explain a few things about it. I've been working with it a couple days and I like it now that I understand, another cool thing to learn about
For those who got problems with installation on v13.1 use the following guide it will help you all links below its from official sites not mirrors etc.
Steps for make sure you're not confused
1)reboot to twrp recovery or cwm
2)install magisk uninstaller zip
3)install unroot kenzo zip
4)install magisk v13.1
5) reboot device
6) install magisk manager if not installed automatically
7) attention before you use it keep your boot.img as a backup to restore it if you are not going to use a custom kernel read below the edit why thanks
Ps.worked perfectly on Nougat NOS release latest beta with radon kernel 5.1 hope to work on your ROM too
EDIT:When you use the nitrogen unroot zip in restore the nos kernel by Nougat version so on Miui and other ROMS of course if you dont use custom kernel take a backup of your current kernel just the boot part or just install the custom kernel like radon,agni after the whole steps etc sorry about that it just took me a while to find out cuz I just checked my kernel adiutor and I just saw the wild kernel of nitrogen on performance gov and it burned my hand almost xd
UPDATE:Try this unroot zip file first it doesn't going to mess with your kernel amd change it but if that doesn't work you have to do it with tge other way thanks for understanding :')
-->Download link press here<--
Kenzo unroot by NOS site (worked in Nougat with radon 5.1)check the update please before use this zip file
magisk uninstaller from official link by @topjohnwu
magisk v13.1 by official link of @topjohnwu
magisk manager 5.0.4 from official link of @topjohnwu
1. CM/AOSP without root (or unroot)
2. Flash Magisk 13.1 (Magisk Manager included, no need to remove the old one if you are using)
3. Done
Archmage1809 said:
1. CM/AOSP without root (or unroot)
2. Flash Magisk 13.1 (Magisk Manager included, no need to remove the old one if you are using)
3. Done
Click to expand...
Click to collapse
I talk about people who got problem with installation about error 1 since all roms got root they have to use an unroot zip as I just saw only new halogen os doesn't include root dont pretend the smart boy you can just ignore the post
i have problem with miui 8 developer rom, stuck in boot loading although i have dirty flashed rom
solo player said:
i have problem with miui 8 developer rom, stuck in boot loading although i have dirty flashed rom
Click to expand...
Click to collapse
Flash the kernel again and the problem will be solved I just figured out something just now cuz my device burned my hand almost xd
After install install magisk v13.1, Do I need to install phh-superuser-magisk-r266-2.zip?
After install install MagiskManager-v5.0.4.apk, Do I need to install Superuser_1.0.3.3.apk?
magisk v13.1 by official link of @topjohnwu not works on MIUI 8.3.0.5(MHOMEID).. Already tried and stuck at MI logo..
xmixmaster said:
Flash the kernel again and the problem will be solved I just figured out something just now cuz my device burned my hand almost xd
Click to expand...
Click to collapse
sadly it didn't work for me i have to wait for fix or another wokaround
jerung3000 said:
After install install magisk v13.1, Do I need to install phh-superuser-magisk-r266-2.zip?
After install install MagiskManager-v5.0.4.apk, Do I need to install Superuser_1.0.3.3.apk?
Click to expand...
Click to collapse
No it will autoroot your phone just check the steps I writed and pay attention on update I did
solo player said:
sadly it didn't work for me i have to wait for fix or another wokaround
Click to expand...
Click to collapse
What rom you got?
xmixmaster said:
What rom you got?
Click to expand...
Click to collapse
miui 8 7.7.6 developer rom
Do we really need this guide? Lol
I have installed superuser how can I replace it to magisk as safteynet check doesn't pass on superuser after Xposed installation.
I flashed Nitrogen 2 based on Orio in Redmi Note 3. How i can install / flash magisk .?
I root the same with Supersu
the module that is listed is download section of magisk will work in all phone or on the specific phone that is mentioned there?
links are down:cyclops:
Here is in details and with all files on one place how to root stock Android Pie for SM-G955F device.
Please if you don't know what are you doing, better avoid this straight forward process because I presume you already knows it.
Also...it will work on ALL Pie firmware versions.
Download on your SDcard all files attached here and...
Rooting process goes as follows.
1. Flash stock firmware G955FXXU4DSBA_G955FOXM4DSBA_DBT and wait for welcome screen on device and reboot in download mode again
2. Flash latest TWRP recovery
3. Enter in TWRP recovery and allow file modifications, then
3a. Format data from recovery...reboot recovery again and repeat procedure from above
4. Install from TWRP no-verity-opt-encrypt-samsung-1.0.zip from link below.
5. Reboot recovery
6. From recovery install Magisk-v18.1(18100).zip
7. Now restart and configure your device as you need.
8. Install latest Magisk app and open app, and within app, install all necessery files
9. Now you are rooted
Install Viper4android
To prepare before, please with Root explorer app rename file audio_effects.conf in audio_effects.conf.BAK, located in folder Vendor/etc
1. Install latest busybox
2. Install ViPER4Android_FX_v2505_A7.x_Nougat_IO_test_fix.apk from here
3. Reboot device and go into TWRP
3a. Install FUSION KERNEL from link below ( one of the fastest kernels I have ever seen)
4. Install Viper drivers as usuall
5. Reboot device
Viper4android is installed.
In Settings check in Sound and vibrations menu if Viper is your default sound module, if not, select it.
.
THANK YOU NOTE GOES TO ALL DEVELOPERS WHO BLESSED US WITH THEIR WORKS !
.
MAGISK
https://www.xda-developers.com/how-to-install-magisk/
FUSION KERNEL with permissive mode
https://www.leorom.cc/index.php/fusion.html?t=1553420049699
TWRP S8+
https://forum.xda-developers.com/galaxy-s8+/development/recovery-twrp-galaxy-s8-exynos-t3594756
VIPER4ANDROID
https://forum.xda-developers.com/showthread.php?t=2191223
I do not take any responsibility for possible errors or damaged devices caused by lack of someones knowledge.
.
Does anyone tryed it?
Will try tomorrow!
Thanks!
Just followed your steps and my phone is rooted now!
keunhuvac said:
Just followed your steps and my phone is rooted now!
Click to expand...
Click to collapse
Excellent !
Btw, i use viper module in magisk manager and it works fine!
keunhuvac said:
Btw, i use viper module in magisk manager and it works fine!
Click to expand...
Click to collapse
Same here, works fine with Magisk Module ?
keunhuvac said:
Btw, i use viper module in magisk manager and it works fine!
Click to expand...
Click to collapse
Thank you for that info. I didn't tryed module rather then install standalone app. Anyway, good to work on both ways.
tin2404 said:
Here is in details and with all files on one place how to root stock Android Pie for SM-G955F device.
Please if you don't know what are you doing, better avoid this straight forward process because I presume you already knows it.
Also...it will work on ALL Pie firmware versions.
Download on your SDcard all files attached here and...
Rooting process goes as follows.
1. Flash stock firmware G955FXXU4DSBA_G955FOXM4DSBA_DBT and wait for welcome screen on device and reboot in download mode again
2. Flash latest TWRP recovery
3. Enter in TWRP recovery and allow file modifications, then
3a. Format data from recovery...reboot recovery again and repeat procedure from above
4. Install from TWRP no-verity-opt-encrypt-samsung-1.0.zip from link below.
5. Reboot recovery
6. From recovery install Magisk-v18.1(18100).zip
7. Now restart and configure your device as you need.
8. Install latest Magisk app and open app, and within app, install all necessery files
9. Now you are rooted
Install Viper4android
To prepare before, please with Root explorer app rename file audio_effects.conf in audio_effects.conf.BAK, located in folder Vendor/etc
1. Install latest busybox
2. Install ViPER4Android_FX_v2505_A7.x_Nougat_IO_test_fix.apk from here
3. Reboot device and go into TWRP
3a. Install RZ KERNEL PIE from here
4. Install Viper drivers as usuall
5. Reboot device
Viper4android is installed.
In Settings check in Sound and vibrations menu if Viper is your default sound module, if not, select it.
.
THANK YOU NOTE GOES TO ALL DEVELOPERS WHO BLESSED US WITH THEIR WORKS !
.
MAGISK
https://www.xda-developers.com/how-to-install-magisk/
RZ KERNEL with permissive mode
https://forum.xda-developers.com/ga...t/kernel-rz-kernel-samsung-galaxy-s8-t3893139
TWRP S8+
https://forum.xda-developers.com/galaxy-s8+/development/recovery-twrp-galaxy-s8-exynos-t3594756
VIPER4ANDROID
https://forum.xda-developers.com/showthread.php?t=2191223
I do not take any responsibility for possible errors or damaged devices caused by lack of someones knowledge.
.
Click to expand...
Click to collapse
what about OEM unlock, I must turn on??
jackherer72 said:
what about OEM unlock, I must turn on??
Click to expand...
Click to collapse
https://forum.xda-developers.com/sitesearch.php?q=oem unlock
Hello, you have solution for root samsung s8 + g9550zhu4dSg2 ?