vontar tv box x1 uncertified andriod - Android TV General

hello every body
i have vontar x1 tv box with uncertified andriod 10 with on/off rooting option
i have prb to run officials apps
due the safety net failed test
is there any solution to baypass the safetynet

Any solutions

Vontar177 said:
hello every body
i have vontar x1 tv box with uncertified andriod 10 with on/off rooting option
i have prb to run officials apps
due the safety net failed test
is there any solution to baypass the safetynet
Click to expand...
Click to collapse
Plz help

plz respond

Tenho o mesmo problema com M3U
Os arquivos M3U normalmente incluem caminhos relativos, absolutos ou básicos em URL para os recursos de mídia incluídos na lista, então o player 'sabe' onde encontrar os arquivos. Comentários e diretrizes estendidas permitem armazenar nomes de pista, posição e dados de duração dentro de arquivos .m3u .
Um arquivo .m3u pode ser processado em qualquer plataforma que possa lidar com arquivos de texto (TXT). Em um arquivo M3U, pode haver referências a arquivos de mídia local e remota, fluxos de áudio e vídeo da Internet, mas uma referência a outro arquivo .m3u pode não ser tolerada por alguns players.
Uma maneira de prática de usar uma lista de reprodução M3U é incluir uma URL de fluxo de rádio da Internet e fazer com que o seu leitor de mídia reproduza a estação desejada.

Vontar177 said:
hello every body
i have vontar x1 tv box with uncertified andriod 10 with on/off rooting option
i have prb to run officials apps
due the safety net failed test
is there any solution to baypass the safetynet
Click to expand...
Click to collapse
Try my ROM on it, is google play certified https://aidansrom.ml

aidanmacgregor said:
Try my ROM on it, is google play certified https://aidansrom.ml
Click to expand...
Click to collapse
my box is allwinner h616 unefortently

Vontar177 said:
hello every body
i have vontar x1 tv box with uncertified andriod 10 with on/off rooting option
i have prb to run officials apps
due the safety net failed test
is there any solution to baypass the safetynet
Click to expand...
Click to collapse
How to do it?
Download kingo root https://root-apk.kingoapp.com/kingoroot-download.htm
install it, open it connect wired/wireless mouse, press get root, wait for it to get root, if it is stuck at 90%, press back and an error will appear, close the app, delete kingo root from settings app section. turn off and turn on again you will see superuser app, download root exploer: https://dl.uploadgram.me/618fcdfbbee36g?raw
install it, open then navigate: /data/data/com.android.vending/shared_prefs
search for finsky.xml open it on text editor, search for device-google-certified
instead of false rewrite it to true then turn off and turn on again.

Related

[GUIDE] Hardbrick Moto Z Play 100%working PT-BR/English [SOLVED]

tested on the versions 6.0.1/7.0/7.1.1 any patch
English
I used a blankflash and longer able to help several friends !!
1st format your Windows to version 7 and install all drivers PC and no Motorola
2st if you are mode qs_bulk install this driver Windows, this driver tb serves to win 7 qdloader pm-USB driver 32/64 bit latest 2017 signed version: http://www.androidbrick.com/download/latest-2017-qualcomm-diag-qd-loader-windows-10-drivers-signed/
3st download the firmware stock can be the first version or the last
4st after your device JA is being recognized as use this blankflash https://drive.google.com/open?id=1fh1R1PcPb_SUQxbMQ18uD7VKcQ31ZPmK click qboot.bat after volume and power pressured connect to the PC wait finish the procedure reconfiguration of bootloader
5st as soon as finish it will be recognized as fastboot Addison's intale manually this driver https://drive.google.com/open?id=1Nob-tWEHBD0T6kYrMHROGfDMvBKE0RsE
6st so recognize as ADB Android interface in device manager try flashear the ROM by RSD Lite if not be able to use the 7
7 download the ADB + relock bootoader this link https://drive.google.com/open?id=1hNvRn7h9WI1FQVzRz3WhUv1nZ4nwWsk_ copy everything to folder of stock ROM and run the relock mode fastboot wait finish and be happy your device restart with soon official and OEM blocked again
good luck
who are unable to and has interest of aid I help make the 1st and 3rd step I can help via teamviewer please contact me by my email [email protected] or ZAP +55 (16) 996306525
in my video relock on YouTube has feedback positive who helped check
https://www.youtube.com/watch?v=gC7hZsyvU3o&t=1s
if liked the content if sign up in my channel
https://www.youtube.com/c/jaderalves
help me !!
Testado nas versões 6.0.1/7.0/7.1.1 qualquer patch
PT-BR
Eu usei um blankflash e já consegui ajudar varios amigos !!
1º formate seu windows para versao 7 e instale todos os drivers do pc e nenhum da motorola
2ª se estiver em modo qs_bulk instale esse driver windows ,este driver tb serve para o win 7
QDLoader HS-USB Driver 32/64 bit
Latest 2017 signed version : http://www.androidbrick.com/download/latest-2017-qualcomm-diag-qd-loader-windows-10-drivers-signed/
3º baixe o firmware stock pode ser a primeira versao ou a ultima
4º depois que seu aparelho ja estiver sendo reconhecido como use este blankflash https://drive.google.com/open?id=1fh1R1PcPb_SUQxbMQ18uD7VKcQ31ZPmK clique em qboot.bat depois com volume e power pressionados conecte ao pc espere terminar o procedimento de reconfiguraçao de bootloader
5º logo que terminar ele será reconhecido como fastboot addison S intale manualmente este driver https://drive.google.com/open?id=1Nob-tWEHBD0T6kYrMHROGfDMvBKE0RsE
6º assim que reconhecer como adb android interface no gerenciador de dispositovos tente flashear a rom pelo rsd lite se nao conseguir use a opcao 7
7º baixe o ADB+relock bootoader deste link https://drive.google.com/open?id=1hNvRn7h9WI1FQVzRz3WhUv1nZ4nwWsk_ copie tudo para pasta da stock rom e execute o relock mode fastboot espere terminar e seja feliz seu aparelho reiniciara com logo oficial e com oem bloqueado novemente
Boa Sorte
Quem não conseguir e tiver interesse de uma ajuda eu ajudo faça o 1º e 3º passo que posso ajudar via teamviewer entre em contato comigo pelo meu email [email protected] Ou ZAP +55 (16) 996306525
no meu video de relock no youtube tem feedback positivos de quem ajudei verifique
https://www.youtube.com/watch?v=gC7hZsyvU3o&t=1s
se gostou do conteudo se increva no meu canal
https://www.youtube.com/c/jaderalves
me ajude !!
Mod Edit: Placed English first, then translation below.
Obrigado, Jader. Isso irá ajudar muita gente.
Tks, Jader. This will help everyone.
tiago1966 said:
Obrigado, Jader. Isso irá ajudar muita gente.
Tks, Jader. This will help everyone.
Click to expand...
Click to collapse
Clique no gostei para agradecer por favor na postagem original obrigado
Click on the I liked it to thank you in the original post thank you
report my post Supah Cookie for putting a procedure in 2 languages ​​among them the English the post is mine and put it the way I want it clear respecting the rule of being posted in English
SupahCookie said:
Rules... English only
Click to expand...
Click to collapse
It's my understanding that posts in a non English native language that also include an English translation are acceptable. Is this not the case?
dandrumheller said:
It's my understanding that posts in a non English native language that also include an English translation are acceptable. Is this not the case?
Click to expand...
Click to collapse
Yes I don't see problem in posting in the native language since there is a translation for the English present in the post that Supahcokkie is catching on my foot because of a post of him that I copied part, but I will redo a relock post that I developed with just a click and a rom
SupahCookie said:
I think not..
Click to expand...
Click to collapse
Looks to me he would be just fine if he moved the English section to the top of the post...
* * * REMINDER * * *
Posting in a language other than English IS ALLOWED, as long as the English portion of the comment is FIRST, and the translation is SECOND.
For those who think they know the Forum Rules, you can refresh your memories HERE.
Please post with respect and not YELLING or insults. Thanks.
tl;dr
4. Use the English language.
We understand that with all the different nationalities, not everyone speaks English well, but please try. If you're really unable to post in English, use an online translator. You're free to include your original message in your own language, below the English translation. (This rule covers your posts, profile entries and signature).
.........................................................................
* * * LEMBRETE * * *
A publicação em um idioma que não seja inglês É PERMITIDO, desde que a parte em inglês do comentário seja PRIMEIRA, e a tradução é SEGUNDA.
Para aqueles que pensam conhecer as Regras do Fórum, você pode atualizar suas memórias AQUI .
Por favor, poste com respeito e não YELLING ou insultos. Obrigado.
tl dr dr
4. Use a língua inglesa.
Nós entendemos isso com todas as diferentes nacionalidades, nem todos falam inglês bem, mas tente. Se você realmente não conseguir postar em inglês, use um tradutor online. Você pode incluir sua mensagem original em seu próprio idioma, abaixo da tradução em inglês. (Esta regra abrange suas postagens, entradas de perfil e assinatura).
And now this is a great tutorial. Mod you can pin this if you feel so.
DeHuMaNiZeD said:
And now this is a great tutorial. Mod you can pin this if you feel so.
Click to expand...
Click to collapse
Thanks
Jaderalves said:
Thanks
Click to expand...
Click to collapse
If you wish to you could edit 1st post, advanced, put [GUIDE][addison] in front of title and move solved to end. That might make it easier for folks to find. bricked phones happen and if this works it needs notoriety.
look at
https://forum.xda-developers.com/mo...se-attempt-t3812530/post76991120#post76991120
KrisM22 said:
If you wish to you could edit 1st post, advanced, put [GUIDE][addison] in front of title and move solved to end. That might make it easier for folks to find. bricked phones happen and if this works it needs notoriety.
Click to expand...
Click to collapse
Really work thnk for comment
check links in OP please.
KrisM22 said:
check links in OP please.
Click to expand...
Click to collapse
links checked thanks
for me is working in Win 10... win7 is not mandatory
Raphael VR6 said:
for me is working in Win 10... win7 is not mandatory
Click to expand...
Click to collapse
Excellent!!!
Esse guia tambem funciona para soft brick? Aceitei um update OTA e agora ficou preso no twrp.
yssie said:
Esse guia tambem funciona para soft brick? Aceitei um update OTA e agora ficou preso no twrp.
Click to expand...
Click to collapse
"Does this guide also work for soft brick? I accepted an OTA update and now got stuck in twrp."
I don't think so - if you can get to TWRP, you can flash a custom ROM, and then use this guide:
https://forum.xda-developers.com/moto-z-play/how-to/guide-relock-bootloader-to-lasted-stock-t3718190
but ask there.
KrisM22 said:
"Does this guide also work for soft brick? I accepted an OTA update and now got stuck in twrp."
I don't think so - if you can get to TWRP, you can flash a custom ROM, and then use this guide:
https://forum.xda-developers.com/moto-z-play/how-to/guide-relock-bootloader-to-lasted-stock-t3718190
but ask there.
Click to expand...
Click to collapse
Thanks!
edit: I managed to fix it! Again, thanks!
yssie said:
Esse guia tambem funciona para soft brick? Aceitei um update OTA e agora ficou preso no twrp.
Click to expand...
Click to collapse
nao nao funciona mas eu arrumo pra vc

Help

Hello guys !!
I just bought an S7 edge (please the device is not stolen I have the note)
*** It was in version 6.0, it appeared as soon as I connected the same on wifi, I received an update notification for 7.0
** After the update, my chip is showing "not registered on the network", but has signal, the imei is being recorded, until my number is detected in the settings.
but I can not make calls.
*** In order to recover the phone, I downloaded TW recovery here, and installed a 7.0 by recovery.
This: 935F-2DRC6_ver2.zip (I can not find the link from it, but it was downloaded from here right from xda) it has root.
even so, I can not make calls.
I tried to go back through Odin to 6.0, but when I select BL, the flash aborts with error, ("SW REV CHECK FAIL: [system] Fused 2> Binary 1")
And if I flash without BL, but adding all others, I have bootloop, and I no longer have recovery, not even the original.
I need to get it back to 6.0, please help me ...
==========================================================================================
I am in Brazil, I will leave the same text in Portuguese, if you help someone to better understand my problem.
"Eu acabei de comprar um S7 (nota fiscal, por favor, o aparelho não é roubado eu tenho a nota)
Ele estava na versão 6.0, apareceu assim que conectei o mesmo na wifi, recebi uma notificação de atualização para o 7.0
Após o update, meu chip está mostrando "não registrado na rede", mas tem sinal, o imei está constando, até o meu numero é detectado nas configurações.
mas eu não consigo fazer chamadas.
Na intenção de recuperar o telefone, baixei aqui TW recovery, e instalei uma 7.0 pelo recovery.
Esta: 935F-2DRC6_ver2.zip (eu não consigo encontrar o link dela, mas foi baixada daqui mesmo do xda) ela tem root.
mesmo assim, não consigo efetuar ligações.
Eu tentei voltar pelo Odin para a 6.0, mas quando seleciono BL, o flash aborta com erro, ("SW REV CHECK FAIL : [system]Fused 2 > Binary 1")
E se eu flash sem BL, mas adicionando todos os outros, eu tenho bootloop, e não tenho mais o recovery, nem mesmo o original.
eu preciso voltá-lo para a 6.0, me ajudem por favor..."
leonardoaraujo said:
Hello guys !!
I just bought an S7 edge (please the device is not stolen I have the note)
*** It was in version 6.0, it appeared as soon as I connected the same on wifi, I received an update notification for 7.0
** After the update, my chip is showing "not registered on the network", but has signal, the imei is being recorded, until my number is detected in the settings.
but I can not make calls.
*** In order to recover the phone, I downloaded TW recovery here, and installed a 7.0 by recovery.
This: 935F-2DRC6_ver2.zip (I can not find the link from it, but it was downloaded from here right from xda) it has root.
even so, I can not make calls.
I tried to go back through Odin to 6.0, but when I select BL, the flash aborts with error, ("SW REV CHECK FAIL: [system] Fused 2> Binary 1")
And if I flash without BL, but adding all others, I have bootloop, and I no longer have recovery, not even the original.
I need to get it back to 6.0, please help me ...
==========================================================================================
I am in Brazil, I will leave the same text in Portuguese, if you help someone to better understand my problem.
"Eu acabei de comprar um S7 (nota fiscal, por favor, o aparelho não é roubado eu tenho a nota)
Ele estava na versão 6.0, apareceu assim que conectei o mesmo na wifi, recebi uma notificação de atualização para o 7.0
Após o update, meu chip está mostrando "não registrado na rede", mas tem sinal, o imei está constando, até o meu numero é detectado nas configurações.
mas eu não consigo fazer chamadas.
Na intenção de recuperar o telefone, baixei aqui TW recovery, e instalei uma 7.0 pelo recovery.
Esta: 935F-2DRC6_ver2.zip (eu não consigo encontrar o link dela, mas foi baixada daqui mesmo do xda) ela tem root.
mesmo assim, não consigo efetuar ligações.
Eu tentei voltar pelo Odin para a 6.0, mas quando seleciono BL, o flash aborta com erro, ("SW REV CHECK FAIL : [system]Fused 2 > Binary 1")
E se eu flash sem BL, mas adicionando todos os outros, eu tenho bootloop, e não tenho mais o recovery, nem mesmo o original.
eu preciso voltá-lo para a 6.0, me ajudem por favor..."
Click to expand...
Click to collapse
Not sure why the update would knock you phone off the network. When you say " it doesn't show the number" are you talking about your IMEI or phone number? The error you are getting from odin maybe because you are a higher binary now, you cannot downgrade the binary.
Go to settings, about phone and signal, do you see your phone settings populated in there?
Fear_The_Fluff said:
Not sure why the update would knock you phone off the network. When you say " it doesn't show the number" are you talking about your IMEI or phone number? The error you are getting from odin maybe because you are a higher binary now, you cannot downgrade the binary.
Go to settings, about phone and signal, do you see your phone settings populated in there?
Click to expand...
Click to collapse
yes!!
I see my phone number, I see my correct imei, and when I select to search for networks, he finds them all.
but when I select my carrier, or any other, I have the information:
"Not registered on the network, please try again later"
thanks!!
sound estrange
Does anyone confirm something for me?
when I rock my G935f back and forth, I hear a noise, like a disconnected connector, I need someone to test me, I think the antenna connector is disconnected ..
please..
I found that the device is foreign, it is not the version that comes to Brazil, I need help, please,
Does anyone guide me how to back my smartphone to 6.0 via odin?
I tried several but I do not have the original recovery anymore, after I installed twrp, no rom stock (via odir), boot, and I can not access the original recovery anymore, being forced to install twrp again and install a custom one. .
help me.....
I'm from Brazil as well, and I have the same problem. I even paid people on the web from places like like "Mercado Livre" (Brazilian eBay) to do a fix, but nothing worked, still have the phone not working with me....
So sad....
Download z3x pro cracked and root then patch cert on box and enjoy

s8, recovery mode, what is "lacking storage booting"?

curious cos I can't find any info on this anywhere.
zentg said:
curious cos I can't find any info on this anywhere.
Click to expand...
Click to collapse
It is a backup reboot option incase of your storage is full where you cant bootup anymore.
kpwnApps said:
It is a backup reboot option incase of your storage is full where you cant bootup anymore.
Click to expand...
Click to collapse
will it delete data's because my phone is currently on a restarting screen the whole day and it has a message that say you need to open to recieve notifications which I already did but idk whats happening to my phone right now. I don't wanna factory reset because I have important files in phone.
henzal said:
será que ele apagar dados porque o meu telefone está atualmente em uma tela de reinicialização o dia inteiro e tem uma mensagem que diz que você precisa abrir para receber notificações que eu já fiz, mas idk o que está acontecendo com o meu telefone agora. Não quero redefinir a fábrica porque tenho arquivos importantes no telefone.
Click to expand...
Click to collapse
i have this problem too

Please help me, I updated my MI9t to xiaomi.eu and it answers alone

You can help me with this part, because I can't solve anything, I install other roms, but it stays the same.
Note: My English is not there.
What do u mean by it answers alone ? Phone calls ?
Badis st said:
O que você quer dizer com ele responde sozinho? Telefonemas ?
Click to expand...
Click to collapse
"Sim, como telefonemas.
por exemplo alguém me liga e ele atende sozinho mesmo desabilitando a chamada automática"
GuiKnightIII said:
"Sim, como telefonemas.
por exemplo alguém me liga e ele atende sozinho mesmo desabilitando a chamada automática"
Click to expand...
Click to collapse
Restore the ROM and see if it changes. It has to be some kind of setting
yaro666 said:
Restaure a ROM e veja se muda. Tem que ser algum tipo de configuração
Click to expand...
Click to collapse
E I installed the official ROM, and it didn't work continued with the same problem I installed the official ROM, and it didn't work continued with the same problem
try a hard reset and dont install your back up
tutibreaker said:
tente um hard reset e não instale seu backup
Click to expand...
Click to collapse
tutibreaker said:
try a hard reset and dont install your back up
Click to expand...
Click to collapse
Hi, I did this procedure too, but it didn't work either. And as there was a bug in the general interface of the device, and I've done all these procedures, even blocking the bootloader
have you tried settings in phone app and standard settings?
Settings, type Auto to Search box on top and open Auto-answer - see the screenshot
yaro666 said:
você tenta configurar no aplicativo de telefone e configurações padrão
zgfg said:
Configurações, Auto para caixa de resposta de pesquisa na parte superior digite e abra automática - veja a captura de tela
Click to expand...
Click to collapse
S Yes, I already did this procedure.
Click to expand...
Click to collapse

please I kindly request your help, you know that by mistake I uninstalled the miudrive screen application from my k2001n android radio which allows to

please I kindly request your help, you know that by mistake I uninstalled the miudrive screen application from my k2001n android radio which allows to project the mobile screen towards the radio, but I have not been able to find it for reinstall, I tried to reset to factory settings but the app was definitely deleted, what could I do??? many in advance
please I kindly request your help, you know that by mistake I uninstalled the miudrive screen application from my k2001n android radio which allows to project the mobile screen towards the radio, but I have not been able to find it for reinstall, I tried to reset to factory settings but the app was definitely deleted, what could I do??? many in advance
Paulof195 said:
please I kindly request your help, you know that by mistake I uninstalled the miudrive screen application from my k2001n android radio which allows to project the mobile screen towards the radio, but I have not been able to find it for reinstall, I tried to reset to factory settings but the app was definitely deleted, what could I do??? many in advance
Click to expand...
Click to collapse
Paulof195 said:
por favor peço sua ajuda, você sabe que por engano eu desinstalei o aplicativo de tela miudrive do meu rádio k2001n android que permite projetar a tela do celular em direção ao rádio, mas não consegui encontrá-lo para reinstalar, tentei resetar para as configurações de fábrica, mas o aplicativo foi definitivamente excluído, o que eu poderia fazer?? muitos com antecedência
Click to expand...
Click to collapse
So go into the system settings and check the carplay
Eso entrar nas configuracao sistema e marcar o car play

Categories

Resources