Database Users

Adapt stylus broke my silo!!! Don't buy them!!!

Hi everyone,
Today I bought a set of new styli from Adapt for my Hermes. I used it for a few times today. But one time when I reinserted the stylus after entering some text, I heard a "knack" sound in the silo. Now my stylus will fall out when picking up the device. I am very disapointed with this particular Adapt product and recommend everybody who reads this post to not purchase their styli.
But my real question is, does one of you know how to fix this?
Scott

Rahza said:
Hi everyone,
Today I bought a set of new styli from Adapt for my Hermes. I used it for a few times today. But one time when I reinserted the stylus after entering some text, I heard a "knack" sound in the silo. Now my stylus will fall out when picking up the device. I am very disapointed with this particular Adapt product and recommend everybody who reads this post to not purchase their styli.
But my real question is, does one of you know how to fix this?
Scott
Click to expand...
Click to collapse
You have either broken the white clip or dislodged the rubber block.
You would need to remove the back casing (4 screws) and unclip around the edge.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Mike

nice one mike,excellent answer.have a go dude its very easy actually

Fixed it!
Thanks Mike,
Fixed it this evening. Indeed, it was just too easy! Only releasing the back, after unscrewing it, was kinda tricky. Everything turned out fine and it works like a charm now.
Thanks again!
Scott

Good news!
I forgot to mention, but I'm sure you remembered to line up the camera's macro toggle arm when putting the back on again. If not you'll find the macro switch doesn't work. If so it's easy to remove the back, line iup the switch (a bit fiddly) and replace back cover again.
Mike

Hi Mike,
Thanks for the tip.
Before I attemted the "surgery", I read the blog you reffered to throughoutly. So I knew about the macro switch. But thanks again!
Scott

Do not express their views and support of the landlord, the more people want to verify

xperia x2 Disassemble guide >>> videos inside !!!

I think many people really want this tutorial so here it is ... found it at Russian forums :
if you click thanks button i would appreciate it.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
you must have pdf reader to open them ... if you don't have one you can get adobe pdf reader here
All the files uploaded to mediafire.
1-all pdf electronic information stuff "not really important" >>>> here
2-video about displacing the front panel. >>>>>>>>>>>>> here
3-overall tutorial of disassembling and reassembling the phone. >>> here
i'm not responsible for any damage on your device ... take at your own responsibility !!!

nice!!!!
tnks

Very nice but I hope never to need it

Thank you, i intend to replace my front cover.

i think you shoud wait... i have removed the old front cover and now i have touch problems(i press certain area and the phone rigesters another area) don't know what to do??
i believe that my phone is out of warranty now.
if any one knows where the problem is please help!

the phone is now back from the repair center ... they have replaced the whole screen with touch ... it had cost me a lot of money "about 500 LE" and the phone now isn't the same as it was before this ... so i don't recommend any one of you to do this without being completely careful ...
now my phone is out of warranty ... and i have to pay extra money to revert it back to it's original case ... so BE CAREFUL with what you are doing as this is not easy as it seems to be.

Yes I fu**ed up mine too. First it was some indentation on the front upper rim, then the camera lens cover, so I decided I was up to a DIY work. I've often refurbished my dear SE phones to look as new but this level four repair has proven to be beyond my reach. The local service co. returned the phone in the same state and said no can do.
T'is the time I had to admit I really love this crappy piece of software on a wonderfully sweet hardware and have to get another one back, as price dropped as low as its makers dropped the phone itself.
Next SE X2 I will lay my hands on will have all my TLC and probably end up years from now as a stylish portable FM radio player, aside to an old R520m I use as the ultimate alarm clock with light sensor snooze.

thank for share

thanks for sharing

thanks very good

[Q] Before I pulverize my Jade...

Hello friends,
I've been using this phone for two years now and it was not bad until recently when touch screen started to misfunction, especially in lower third of the screen, making it impossible to type meny buttons and use keyboard correctly. Since then, I have properly flashed several ROMs, even cooked ones from this forum (btw, I find them very neat) but the problem persist in wide range:
- with some ROMs it get stucked on Screen alignment;
- even if "Remote Screen Alignment" tool was used, it didnt' help with most ROMs;
- Some ROMs like
_HTC Touch 3G_RUU_Jade_Orange_FR-B2B_1.71.73.11_Radio_Sign_12.36.30.29.UMA_0.29.30.U23_Ship
and
sj1.2.2-wwe_ultralite&clean (thanks to developers and uploaders)
pass well the screen alignment, but after short walk through Menu it starts again to be unprecise and makes use of keyboard and other impossible!!!
So, just before I grab my hammer and pulverize this dear and beloved Windows phone, is there ANYONE who can give me an advice here?
Thanks to all of you and keep developing, because you're doing a great deed for the people worldwide.
Cheers from France

Mais oui, mon ami. The problem lies with the digitizer, meaning the device which converts your screen touches to digital information. It's the phone's plastic screen cover, to be more precise. Either take your phone to a GSM service to have yours replaced, or buy a new one from e-bay and change it yourself, if you're a DIY kind of guy.
This is how the digitizer looks:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Multumesc prietenului meu!
I thought it could be a hardware failure, because we just can't blame it on software every time.
Funny, but I think I didn't wear-out this digitizer that much in the past, but maybe their lifetime is not as long as three years?
I remember this Jade fell of the table once, so maybe it could be some bad connection?
I also took your advice and googled a bit for shopping results and it seems that there are TWO different sorts of displays and digitizers for the same model of HTC Touch 3G Jade T3232. This means that I should open up the phone prior to purchase of this spare part.
I promise to post here the result of this "surgical operation" once I get it done.
Thanks again

[Q] digitizer problems! PLEASE PASS

hey there!
some days ago, I had new problems with my digitizer.
began 4 months ago, when I have replaced the broken digitizer with a new one bought on ebay, and so i had some issues with its sensivity. at first i had a problem on the bottom. I couldn't scroll up the pull-down menu of the status bar or scroll through the bar of the music player (red).
recently the sensitivity of the touchscreen is worsened and when I adjusted the smearings inside the digitizer, the situation got even worse, and now I am unable to use the keyboard on the "zxcvbnm(del)" row in portrait mode and I can't open new page of the browser in landscape mode (yellow).
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
right now my screen is literally gone mad! it automatically picks up touches on each side of the screen and I can't no longer use it. I must do a lock/unlock of the screen to get it out of this loop and so here's that it happens again in half a minute!
What could I do to fix my digitizer? I should be grateful if I might avoid to purchasing a new digitizer one more time, I wasted so much money on my phone that I would have been able to buy a new one!
PS. I'm sure that someone will say that it's only my fault if I have the phone in these conditions. not for really. I had great care to replace the digitizer on the phone and vice versa, so I would like a bit of professionalism to take my issue in a certain way and not that you always criticize the user, fool or not to be. I will consider any advice aside the usual criticisms.
I ask forgiveness for my clarification perhaps a little cheeky, but I felt compelled to say these things because I have experienced similar cases, and I wouldn't to happen again for better mine and yours, and thank you again for your unfailing support and sorry for my bad english I believe that you may solve the problem

Dear
I am also faced such difficulties. You can find my thread regarding "touchscreen malfunction" . But now the problem almost solved. Previously i was used froyo kernel based wiui. Then i change kernel to gb and flashed wiui for gb kernel.Its all before 3 weeks. I cant see the problem Till today. So just try it. My digitalizer was original and not replaced yet. I think the touch sensitivity of froyo kernel is more atleast in my case
Sent from my MB525 using Tapatalk 2

[CLOSED][Fix] Samsung Galaxy Note/Tab 12.2 Flickering Problem

Issue:Most people including me gets flickering problem from under 50% or even 100% of battery which mostly leads to freezing, reboot, sd card errors and etc..
Cause: im not 100% sure
info by: Beut from android central
1- Battery connector on mainboard
2- Battery cable connector
3- Bad battery
Permanent Fix:
1. Pressing middle of Tablet where battery connector stops flickering for moment.
2. Developer options - "turn off hardware overlays" (also enabling "force GPU rendering" might help)
3. Wiping dalvik cache
Better Fix 1#:
Info by: peterjo78
Source: http://forum.xda-developers.com/galaxy-note-pro-12/help/note-pro-12-2-screen-flickers-t2835337
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
altho video is deleted: https://www.youtube.com/watch?v=Cvxb...e_gdata_player+
More Picture:
Info by: cenakhoa
Better Fix 2#:
info by: Beut from android central
Source: http://forums.androidcentral.com/samsung-galaxy-note-pro-12-2/369546-samsung-note-pro-12-2-screen-flickering-problems.html
More Picture:
Info by: ItsMrRage
Source:http://forum.xda-developers.com/attachment.php?attachmentid=3427870&d=1438674238
This might help disassembling: https://www.youtube.com/watch?v=VeSG0hHpAG8
I Hope this helped u and good luck!!

Is this biggest font, or it could be bigger ?
This issue is solved on more threads before. Thank you for reminding us.

tin2404 said:
Is this biggest font, or it could be bigger ?
This issue is solved on more threads before. Thank you for reminding us.
Click to expand...
Click to collapse
it could be bigger and yea i know since i got info from other theards but i just wanted to put all the info togather lol

Quantra said:
it could be bigger and yea i know since i got info from other theards but i just wanted to put all the info togather lol
Click to expand...
Click to collapse
Thank you for that but it is hard to read and much scroll on mobile devices."lol"
p.s. WARNING NOTICE ;
Don't advice people for something you never done..If you reconnect battery... as I did on my previous P900, you should warn people to DISCONNECT microSD port as well,because on my previous tab there was power shock to microSD chip on its module board and you can never use again microSD.
So, due that fact, you must warn people to disconnect microSD board due power shock when battery is reconnected to slot again because it is expensive device.

Thread closed - it is very difficult to recommend this to anyone. A collection of possible fixes or not does NOT constitute a solution.
Please use a more standardised and reader-friendly font colour and size in future.