Hey so i have a problem i got orangefox on my phone and i tried to install a new kernel but i boot to of its suck on the loading screenwhen i reboot it still goes back to the loading screen
Try to install the Stock ROM back and install TWRP again and flash back OrangeFox happened to me
A405FN / DS
Related
Phone: Galaxy S5 900I
Recovery: Philz 6.57.8
ROM: Alliance 5.3
I've downloaded Alliance ROM and installed as per instructions in the thread.
After customising in ROM customizer, I reboot (tried both automatic and manual reboot to recovery) and while my recovery loads, it doesn't automatically start flashing the ROM. I can go into install from ZIP and select the ROM and everything appears to install, but when the phone reboots, it gets to the alliance loading animation and just sits there, doesn't get any further.
Any suggestions appreciated.
Try booting into recovery normally and wiping data/cache/dalvik and then installing the ROM via your recovery (not using ROM customizer). See if that gets your further
My phone came with version 66.77.... (MIUI 6) from the reseller.
I have installed TWRP, rooted the device using adb and then flashed 5.9.24. So far so good.
After some time i decided to try AOSP ROM. I made a backup in TWRP and then flashed AOSP using TWRP. No problems so far (cleared cache, dalvik etc)
Then I wanted to revert back to 5.9.24. I cleared cache dalvik etc, and then I cannot remember anymore if i have reflashed 5.9.24 or restored the backup made previously from TWRP, the thing I wasn't able to boot into recovery anymore. The phone was stuck on the teamwin logo if booted into recovery but normal boot was working fine.
Then i reflashed twrp using adb.
After doing that, my phone was still stuck on the teamwin logo when booting into recovery, but with normal booting i was getting infinite boot loops at Mi logo screen.
After several ours of tries, i was able to solve the normal booting problem by flashing the stock recovery (so the phone is now back on the 5.9.24 - and working fine) but when I try to flash twrp using adb the same symptoms as before:
- Recovery boot - stuck on teamwin logo screen
- Normal boot - boot loops
I already tried to flash via Updater app, Flashify and Windroid nothing worked.
Can anyone help me to get this custom recovery working, please?
Thanks
Regards,
Nick
lukke04 said:
My phone came with version 66.77.... (MIUI 6) from the reseller.
I have installed TWRP, rooted the device using adb and then flashed 5.9.24. So far so good.
After some time i decided to try AOSP ROM. I made a backup in TWRP and then flashed AOSP using TWRP. No problems so far (cleared cache, dalvik etc)
Then I wanted to revert back to 5.9.24. I cleared cache dalvik etc, and then I cannot remember anymore if i have reflashed 5.9.24 or restored the backup made previously from TWRP, the thing I wasn't able to boot into recovery anymore. The phone was stuck on the teamwin logo if booted into recovery but normal boot was working fine.
Then i reflashed twrp using adb.
After doing that, my phone was still stuck on the teamwin logo when booting into recovery, but with normal booting i was getting infinite boot loops at Mi logo screen.
After several ours of tries, i was able to solve the normal booting problem by flashing the stock recovery (so the phone is now back on the 5.9.24 - and working fine) but when I try to flash twrp using adb the same symptoms as before:
- Recovery boot - stuck on teamwin logo screen
- Normal boot - boot loops
I already tried to flash via Updater app, Flashify and Windroid nothing worked.
Can anyone help me to get this custom recovery working, please?
Thanks
Regards,
Nick
Click to expand...
Click to collapse
Tried this: http://en.miui.com/thread-152550-1-1.html?mobile=2
Sent from my 2014817 using Tapatalk
timberwolf60 said:
Tried this: http://en.miui.com/thread-152550-1-1.html?mobile=2
Sent from my 2014817 using Tapatalk
Click to expand...
Click to collapse
i saw the request of the message but i am not using a custom recovery on my phone,i use a custom dev rom made by miui france.
i think some china dev rom comes rooted by default with custom installer updater and gapps like mine.
i think twrp is not fully compatible with this device yet.
Have you try with sp flash tool method ?
http :// en.miui.com/forum.php?mod=viewthread&tid=156838&extra=page%3D4&mobile=2
I just installed TWRP for the first time ever. I used the Flashify App from the Play Store, installed it and gave it root permissions and just selected the TWRP image on the phones internal store. Seemed to work just fine and did not have to plug my phone into a computer
Like the title says, my phone gets stuck at the boot logo (not bootloader) after I try to flash any custom ROM to which I solve by restoring to a stock rooted nandroid backup of 6.0.
Here's my flash process:
1. Reboot to TWRP
2. Do clean wipe
3. Flash ROM (DU for example)
4. Flash gapps
5. Reboot
TWRP flashes the ROMs and necessary gapps without any issues but no matter what it gets stuck at the boot logo after rebooting. This wasn't a problem in the past as I was using Orion, DU, AICP, etc. Would using the restore-to-stock tool help in this case? The only thing stopping me from using it is the fact that it would wipe my internal storage. Any help would be greatly appreciated. Thanks!
EDIT: I decided to restore to stock and wipe user data and I'm now finally able to get past the the boot logo
How long are you waiting? First boot can exceed 20 minutes just sitting there looking like it's not doing anything...
Sometimes first boot take.more than half an hour
Sorry to revive this but Im getting the same problem... Did u managed to install any rom after u flash the stock rom? Should I do that? How long should I wait on first boot?
I just installed Lineage OS and it works fine. Problem is there is no Google apps play store so I need to get Gapps
But in order to get Gapps flashed I need to reboot into custom recovery like CWM or TWRP.
I couldn't figure out how to install CWM or TWRP at the first place so kinda ignore it thinking nothing will happen.
https://forum.xda-developers.com/showthread.php?t=3651542
I flashed LineAge OS with TWRP app downloaded from Play Store, the phone prior to bootloop was rooted.
I used odin on my PC to flash to stock rom and it just gives me bootloop, the samsung logo just fades in and out like on a bootloop
Samsung G903W is the model number
hi did you get it to work?
Hi all,
So I had this UK version of T560 for a while which was stuck on 4.4, so I found the CM13 rom for T561 and installed it.
I used Odin to install TWRP 3.0.2-1, and then flashed the CM13 rom, ARM Pico 6.0 GApps, superSU latest (2.85 I think..?), and the boot image and the hotkeys fix it required.
This ROM worked great, apart from some wifi connection issues (wifi slow and easily disconnected) and I couldn't connect the tablet to my PC through USB so I had to use my USB micro SD adapter to transfer all files. However the rom itself was stable and easily installed on the first try.
I then wanted to upgrade to the CM14.1 rom for T561, and followed Android Doctor's youtube tutorial (/watch?v=FmRtueImtlw) but this rom was stuck when booting on the boot logo. I would leave the tablet to boot for an hour but it didn't boot, so I tried using SuperSU instead of Magisk 11.6 used in the video, but I never managed to get this rom working, so I went back to the CM13 rom.
Now I've seen the thread for the new Venom 7.1.2 rom, so went and tried to install the rom, but the same thing happened.
My process:
transfer necessary files to tablet with USB micro SD adapter.
wipe data/factory reset
install venomfullv2
install opengapps 7.1 arm pico
install magisk 20.1
reboot
that didn't work, still stuck on the boot logo
I then also tried:
- wipe everything except Micro SD and internal then reinstalling
- wipe everything except Micro SD then reinstalling
- installing without root
-installing both venom v1 and v2 versions
- installing SuperSU instead of Magisk
- installing with and without the boot.img patch that was needed for the LOS14.1 rom
Things I noticed:
- when the venom rom is installed, TWRP says
"INSTALLING ROM FINISHED
script succeeded: result was [ ]"
- USB OTG can't be wiped, red text shows up
same result happens every time, everything installs fine and then the boot logo just keeps looping on the first boot, I usually let it boot for at least 20 minutes before I turn off the device or boot back into TWRP.
Does anyone have any suggestions to get this Venom v2 rom to work?
extract boot.img from v2 zip...flash all normally ,change to install image on TWRP an flash boot.img as boot.....then reboot
gitanillo87 said:
extract boot.img from v2 zip...flash all normally ,change to install image on TWRP an flash boot.img as boot.....then reboot
Click to expand...
Click to collapse
Thank you for the tip, but unfortunately it is still not working.. Really don't know what else to try