Database Users

Pumpkin head unit bluetooth scanning but not finding

Car:Kia Sorento 2010
Head Unit: Pumpkin Android CN10
Android version: 6.01
Processor: quadcore-R16
Model / SKU: CN10-02201b-02A
Audio stopped working across the board. Turned out to be pre-amp in car so wired speakers straight to the stereo.
ON reboot no bluetooth.
I flashed from 'V7.3.2_20170826.102252_KED1' to 'V7.3.2_20170826.102252_KED1-mod' hoping for a bluetooth fix but no joy.
Does this sound like the bluetooth module is kaput or just not quite the right mcu firmware? Or???

some progress
So i got it back momentarily.
In extra settings (password 123456) i went to config info and set b6 and b8 checkboxes to ticked. Rebooted working.
Then rebooted and screen resolution was too large. fixed this with firmware from pumpkin bods.
However I cannot get B6 and B8 settings in config info to save together. It will only allow b8 to be checked.
Infuriating. Having b6 and b8 on is what fixed bluetooth but they will not save.......
Any ideas on how to get the config info to save?

Solved bluetooth issue
So managed to solve bluetooth issue.
Under extra settings changed the model to my car (Kia/Hyundai), let it reboot.
Then reset thru pin hole reset button.
Bluetooth is back.
Didn't seem to matter which rom.
Just steering wheels controls dont work whereas they did once.
hth someone

Unbranded 8227L_demo - No access to onboard computer - Simulated buttons not working

Hi everybody!
I recently bought a 8227L_demo unbranded Chinese android stereo.
Unfortunately, I can’t control the screen on the dashboard because the simulated buttons are not working…so I can't access the clock and time settings on my display...
Below you can see all my system information (unfortunately I can't attach picture because I'm a newbie).
I have a CANBUS Raise psa-rz-15 device.
Steering Wheel Controls are regularly functioning.
My car is a Citroen C3 (year 2008).
I set the Peugeot 307 (2002-2013) Canbus protocol; however, I tried all the available protocols one by one but nothing changes.
Anybody else has the same problem? What can I do to solve?
Maybe with a firmware update?
Thanks again in advance
Android: YT9213AJ_AHD_00011_V001_20200323
Android os: 9.1
XY AUTO: 3.2 (8227L)
CAN PRO: 3.0 (8227L): )/Peugeot307(2002-2013)
DDR: 1G
FLASH: 16G
Cpu: A7 1.3Ghz x 4
Display: 1024*600
MCU: 3.1 (8227L)
Kernel version
3.18.22
[email protected] #4
Mon Mar 23 17:18:00 CST 2020
Build number
android-trunk-m0.AC8227L-V1.0

What did the reseller suggest?

marchnz said:
What did the reseller suggest?
Click to expand...
Click to collapse
Unfortunately I wasn't able to contact the seller...

Go to -> Car setting -> General
Touch the gear top right.
Enter 8888
Change CanBus Settings to Peugeot 307

Hi!
I already set the Peugeot 307 (2002-2013) Canbus protocol and I tried all the available protocols one by one but nothing changes...

My problem is shown here: https://youtu.be/IWp7nXfxk94?t=1152

bosun8472 said:
My problem is shown here:
Click to expand...
Click to collapse
Hi,
Do you solve your problem ? i have the same for my 308 car with PSA-RZ-15 CANBUS ?
Which canbus do you have ?

Help with newest Android multimedia for Honda Accord 7th (2003)

Hello all,
I am new here and came to ask you for some help with my new TS18 head unit. I could not find the right model but here is the serial number i found: 3t101003
I bought android multimedia for honda accord 7th generation with these characteristincs:
- Platform information: TS18
- CPU: UIS8581A (8x1.6 GHz)
- MCU version: Ts10-1.1.100-10-A49889-220511 (GD330)
- System version: TS18-2.2_20220412.183840_WINDOW_THEME1
- Resolution: 1280x720
- CarSetting version: V1.0.0.20220330
- Android version: 11
The problem is that I cant see my AC information of the screen. Already tried everything that I found here and in other forums and videos (swiping wires or choose settings) but it still don't work. Actually when I am trying to save the model select settings i get the error message "This model is not MCU". I am attaching a photo of the error. Do you ever seen that before for these chinise head units?
I am not sure if this is important but originally the car had honda navigation system and it was with dual climate zone controll.

Vasskoss said:
Hello all,
I am new here and came to ask you for some help with my new TS18 head unit. I could not find the right model but here is the serial number i found: 3t101003
I bought android multimedia for honda accord 7th generation with these characteristincs:
- Platform information: TS18
- CPU: UIS8581A (8x1.6 GHz)
- MCU version: Ts10-1.1.100-10-A49889-220511 (GD330)
- System version: TS18-2.2_20220412.183840_WINDOW_THEME1
- Resolution: 1280x720
- CarSetting version: V1.0.0.20220330
- Android version: 11
The problem is that I cant see my AC information of the screen. Already tried everything that I found here and in other forums and videos (swiping wires or choose settings) but it still don't work. Actually when I am trying to save the model select settings i get the error message "This model is not MCU". I am attaching a photo of the error. Do you ever seen that before for these chinise head units?
I am not sure if this is important but originally the car had honda navigation system and it was with dual climate zone controll.
Click to expand...
Click to collapse
Check the CANbox settings in the settings menu.

rigattoni said:
Check the CANbox settings in the settings menu.
Click to expand...
Click to collapse
I tired from Factory Settings -> Select Model and select all Honda accords I found but every time this is the result.
Are there an additional CANbox settings somewhere?

Vasskoss said:
I tired from Factory Settings -> Select Model and select all Honda accords I found but every time this is the result.
Are there an additional CANbox settings somewhere?
Click to expand...
Click to collapse
If the CAN-box does not support your AC settings, you will not be able to get it working.
May be wrong CAN-Box. Ask the seller for sending the right one for your specific car.
...and may be your head unit is not able to get the information from the CAN. Ask the seller, no one can help here.

Thank you for the help, I will investigate with the seller and update the post after I have some news.

PX5 Android 11 HU Suddenly Stopped Recognizing Bluetooth

Hello folks,
need your kind help for 2 problems with my head unit- px5 Android 11
(the HU it came with a car I recently purchased, HU was installed by previous owner its ~1 year old)
1-for several days the HU functioned well with wireless apple car play with Zlibk app and BT etc,
but the HU suddenly stopped recognizing Bluetooth whatsoever,
I tried erasing network and BT settings, factory reset, cleared cache, I do not know what was the original BT protocol (there is a long list under factory settings in which I have entered with 0000 password,
2- Call quality is horrible for the other side - I hear clearly but the callee hear lots of noise - tried online mcu upgrade - its says it is latest MCU
here are full details of my unit:
CPU: 8x ARM Cortex-A53 @1.5GHz
Memory: 4G
Flash Memory: 64GB
Model And Hardware: PX5
Android Version: 11
Build Number:
AUTH: 0
WIFI MAC: 80:40:08:9f:fd:72
BT MAC: 00:01:02:03:04:05
ANDROID.eng.autobu.20211206.171826
MCU: SF0-px5_c54_whd01a-aAaAaA_C8_20210121-10:44
APP: PX5D_C54_HA1_U002U495U519-11-EN_2021-12-06-1715
Any help would be appreciated
Thank you
Avi

Avi_Z said:
Hello folks,
need your kind help for 2 problems with my head unit- px5 Android 11
(the HU it came with a car I recently purchased, HU was installed by previous owner its ~1 year old)
1-for several days the HU functioned well with wireless apple car play with Zlibk app and BT etc,
but the HU suddenly stopped recognizing Bluetooth whatsoever,
I tried erasing network and BT settings, factory reset, cleared cache, I do not know what was the original BT protocol (there is a long list under factory settings in which I have entered with 0000 password,
2- Call quality is horrible for the other side - I hear clearly but the callee hear lots of noise - tried online mcu upgrade - its says it is latest MCU
here are full details of my unit:
CPU: 8x ARM Cortex-A53 @1.5GHz
Memory: 4G
Flash Memory: 64GB
Model And Hardware: PX5
Android Version: 11
Build Number:
AUTH: 0
WIFI MAC: 80:40:08:9f:fd:72
BT MAC: 00:01:02:03:04:05
ANDROID.eng.autobu.20211206.171826
MCU: SF0-px5_c54_whd01a-aAaAaA_C8_20210121-10:44
APP: PX5D_C54_HA1_U002U495U519-11-EN_2021-12-06-1715
Any help would be appreciated
Thank you
Avi
Click to expand...
Click to collapse
issue resolved!!
I entered car settings -- factory settings - arm settings
and chose for bt protocol, updated device name and pairing code using the "override" configuration option, restarted device and problem resolved.

Alps Q92 (Essgoo AZ0001C)

Hello everyone,
I'm have no experience installing and configuring android head units. Got myself one from Aliexpress, Essgoo AZ0001C, that's how they labeled it. I'm trying to install it in Opel Astra H 2009.
Here are some specs:
Android 10
2GB ram
32GB storage
Alps Q92
Platform AC8227L
Car audio: F7.3.7
CAN Pro: V9.0.6 (disconnect): Oudi-Opel
MCU: 4.0
Tried to find in which forum category to put it, but cannot find any more info about MCU except 4.0
My problem is can bus "disconnect" which I assume means there is no communication with the car. Head unit works, GPS works, Playstore, Radio, turns on/off with the car, but cannot program steering wheel buttons, no reverse camera detection, no any board computer info.
I tried going into Factory settings (with password 8888) and found Astra H multiple times in Protocol settings:
Raise - Opel - 08~10 Astra H
Xinpu - Opel
Oudi - Opel
Luzheng - Opel - Andra (was set by default when arrived)
KBS - Opel - 08~10 Astra H
BaoGood - Opel
Can Bus Decoder has this:
RH 20220920
For OPEL
HW: V5 SW: V2
QFN32_16PIN-BOX_V1.1
Basically, I tried selecting every option for Opel in Protocol settings, but without success. Am I missing some setting, or it could be hardware issue, or ?

Just if anyone reads the topic in the future and has the same unit. There are a lot of similar units out there, Chinese cheap head units often use similar chipset. It's old, slow, but can do the work if your expectations are low.
I think I managed to set up everything.
In Factory settings choose "Xinpu - Opel".
Can bus still say "disconnect" but it's not that important.
Map steering wheel commands, it will say failed, but controls will work.
For reverse camera, find brown wire going into black head unit connector (16 pin) and connect it to wire from back light. My camera cable has this wire, it will be 12V when reverse gear is engaged, below 1V when not.
Head unit will not shut down when car is turned off, it will just enter sleep state and drain your battery slowly (consumes around 5W). To prevent it, go to Factory settings with password 8888, select "Engineering test debugging" and enter password 26959910, select "direct shutdown mode". It will shutdown completely when car is turned off, after 30-40 seconds.
Hope it helps someone.