Related
Good day. I am using a stock (not rooted) huawei p8 GRA-L09V100R001C900B151 running 5.0 lollipop in South Africa and cannot find anywhere how to update it to 6.0 marshmallow. Any help would be greatly appreciated. Thanks
Hi, I'd recommend checking for OTA updates from within your phone (in 3 places as below) whilst connected to the internet....
Settings > Update > Check for updates
HiCare app > Me tab > Check for updates
HiCare app > Service tab > OS Upgrade Early Adopters
Please return to let us know if any of the above worked, as this will help other users with the same issue.
Click here if you need to download & install the Huawei HiCare app.
Hi! I have the same problem as OP (except that my software version appears to be GRA-L09C432B200 and I'm in Poland).
Settings > Update > Check for updates tells me "No updates"
HiCare > Me > Check for updates tells me "Current version is up to date"
HiCare > Service > OS Upgrade Early Adopters tells me "Failed to obtain data" (even though internet connection is working well)
Everything is as if I've already had the newest version installed, but isn't the newest version available for the P8 supposed to be Android 6.0? I only have 5.0.
@Im_Curious, you are right that you should have been offered Marshmallow (Android 6) via OTA by now.
You can try the manual method - look in this thread for downloads & instructions: Huawei P8 Official Marshmallow 6.0 [EMUI4.0.1] GRA-L09C B370 Eur Full [no wipe]
As you have B200, you can update to B370 directly (comments taken from the above thread):
silvano2 said:
i installed b370 over b200 without wipe and everything is ok
Click to expand...
Click to collapse
djg269 said:
The following versions can be upgraded
GRA-L09C432B200
GRA-L09C432B313
GRA-L09C432B317
GRA-L09C432B321
Click to expand...
Click to collapse
Precautions & Disclaimer:
1. Before attempting, make sure you have done a thorough, restorable backup
2. Have enough battery power remaining (or keep it plugged in during the update)
3. Do not interrupt the updating process in any way (do not switch off, do not reboot, etc)
4. After updating, your phone will most probably not receive any more OTA updates (i.e. manual updating only)
5. If anything goes wrong, you could end up with a bricked/non-working/irreparable phone, which is your responsibility alone. So, if it is working fine now, may be best to leave alone.
Thank you! I don't have an SD card, though. The instructions don't seem to work with internal storage. Is it possible to update from internal storage?
Yes, you can try from internal storage. If you've already downloaded the file (unzipped it to Update.app) & placed Update.app in a folder called dload, use this method from the phone:
Settings > Update > Menu > Local Update (or similar)
The phone may automatically reboot a few times (this is normal), but only when it is fully booted into the standard system will the update be completed.
P.S. You can now delete the large Update.app file in internal storage to save space.
Thanks for the reply! I've actually got a SD card earlier today and upgraded from it, because I couldn't find a way to upgrade from local storage. After the upgrade, everything seems to work well. It's nice to have an up to date phone.
Im_Curious said:
After the upgrade, everything seems to work well. It's nice to have an up to date phone.
Click to expand...
Click to collapse
That's good to know.
Yes, nice to have an up-to-date phone, but unfortunately there is usually some risk involved.
Hello friends .. I have an original P8 Rom which atualize 6.0 phone .. and now does not want to open any application tells me you access sd card and I can not connect to any mobile network. !! could you help me!? im from Costa Rica
chacon89 said:
Hello friends .. I have an original P8 Rom which atualize 6.0 phone .. and now does not want to open any application tells me you access sd card and I can not connect to any mobile network. !! could you help me!? im from Costa Rica
Click to expand...
Click to collapse
Review Apps Permission - MM requieres explicit permission to storage (SD Card) access. Check System > Apps > "Chrome" >Permissions>Storage (allow it).
Uninstall updates Android System WebView (update when it works).
Connectivity issue maybe related with permissions.
Saludos!
Still struggling
GaT7 said:
Hi, I'd recommend checking for OTA updates from within your phone (in 3 places as below) whilst connected to the internet....
Settings > Update > Check for updates
HiCare app > Me tab > Check for updates
HiCare app > Service tab > OS Upgrade Early Adopters
Please return to let us know if any of the above worked, as this will help other users with the same issue.
I tried all of the above steps after downloading the HiCare app and I get told my phone is up to date after every step, but it is running 5.0 stock. There seems to be no way to upgrade it (or downgrade it in order to upgrade it) that I can find.
Click to expand...
Click to collapse
bobwiggill said:
I tried all of the above steps after downloading the HiCare app and I get told my phone is up to date after every step, but it is running 5.0 stock. There seems to be no way to upgrade it (or downgrade it in order to upgrade it) that I can find.
Click to expand...
Click to collapse
Sorry, can't think of anything else, so best to contact Huawei's SA branch & enquire directly...
Phone: (0027) 860 861111
Opening days/time: Mon-Fri 07:00-22:00, Holiday & Weekend 08:00-17:00
Languages supported: English/Zulu/Xhosa/Tswana
I'm also on gra-l09v100r001c900b151. I'm also looking for a marshmallow update. In South Africa there is no ota update available. On huawei's official site there is also no update.
The update with c432 builds does not work. Can anyone help me find a c900b370 update or any other way to update this phone.
Thanks
Danie
Try this app:
play.google.com/store/apps/details?id=com.teammt.gmanrainy.huaweifirmwarefinder[/url]
If it doesn't work, look for your firmware here:
huawei.com/zamobile/consumer/support/search/index.htm?keywords=Gra-l09
PS: I'm a new user so I can't put direct links here. You will have to copy the above links and paste them in your browser.
DanieBeresford said:
I'm also on gra-l09v100r001c900b151. I'm also looking for a marshmallow update. In South Africa there is no ota update available. On huawei's official site there is also no update.
The update with c432 builds does not work. Can anyone help me find a c900b370 update or any other way to update this phone.
Click to expand...
Click to collapse
If Ammar_'s suggestions don't work, manually update to C900B170 first (link provided below), then subsequently to C432 builds as follows:
Make sure to do a thorough restorable backup if necessary before attempting any of them.
C900B170 - direct download from HERE
C432B200 - direct download from HERE
When on B200, check for OTA updates from within the phone: Settings > Update. If nothing is offered, you can further manually update to B390 (download & install the full version only - not the OTA update):
[Firmware] Huawei P8 B390 - GRA-L09C432/GRA-UL10C432 (OTA/FULL)
Let us know how you get on.
This morning I successfully updated my phone to marshmallow with the help of huawei south Africa. They send me this below email that I followed to the letter.
"We do not have this version (v100r001c900b151) on our side but kindly follow this link : ((I removed the link because I can't post links yet. It was to huawei south Africa's official site.))
GRA-L09_C02B397CUSTC02D001_Firmware_South Africa_Default_Android6.0_EMUI4.0
2016-09-20
Please follow the below steps to update:
Unzip file
Copy file to a SD Card
Switch of phone
Put in SD Card
Switch on the phone
Go to tools
Update
Update from sd card"
I believe this is the newest update available in my country even if it is not exactly for my network or phone. So far so good.
Thanks for all the help!
Danie
DanieBeresford said:
....."We do not have this version (v100r001c900b151) on our side but kindly follow this link : ((I removed the link because I can't post links yet. It was to huawei south Africa's official site.))
Click to expand...
Click to collapse
Thanks, here's the direct download B397 link if needed by others: GRA-L09_C02B397CUSTC02D001_Firmware_South Africa_Default_Android6.0_EMUI4.0
Huawei P8 help with marshmallow
I updated my p8 to B380 (GRA-C900B380) and started having problemas with calls over interner (whatsapp calls and facebook calls)
when i call someone o someone calls me, everything works fin for a few seconds and then they stop hearing me (i can hear them with no problems), and after waiting a few more seconds, it starst working normally again...
Does anybody know why? how can i fix it?
Thank you in advance for any help you could give me...
tarek88cl said:
I updated my p8 to B380 (GRA-C900B380) and started having problemas with calls over interner (whatsapp calls and facebook calls).....
Click to expand...
Click to collapse
What country are you in, & can you post the full model version in this format: GRA-xxxx
GaT7 said:
What country are you in, & can you post the full model version in this format: GRA-xxxx
Click to expand...
Click to collapse
Currently i'm in Spain, the full model is GRA-L09
My Android unit is not a joying product. However, I am using the same CPU chipset (intel sofia).
Joying has been updated to the new version of Android 6.0, so it Like that string "UI and mcu does not match". I have genuine firmware but I can not downgrade it.
Help me eliminate red letters and yellow background in my product.
I can not attach a photo because I am a new member. Sorry.
My product information is
Android Version: 6.0.1
CPU Info: Intel ATOM 4QuadCore. GPU4D: MALI450 MP4
System Info: APP 1024x600 2016-10-09 19:11:44
MCU Version: 2016-09-06 17:39:41 KEQ_(NOR)__90_C9_7706_5009_CAN(XianDai)_Newlap
Please help me solve the problem.
Thanks.
no0496 said:
My Android unit is not a joying product. However, I am using the same CPU chipset (intel sofia).
Joying has been updated to the new version of Android 6.0, so it Like that string "UI and mcu does not match". I have genuine firmware but I can not downgrade it.
Help me eliminate red letters and yellow background in my product.
I can not attach a photo because I am a new member. Sorry.
My product information is
Android Version: 6.0.1
CPU Info: Intel ATOM 4QuadCore. GPU4D: MALI450 MP4
System Info: APP 1024x600 2016-10-09 19:11:44
MCU Version: 2016-09-06 17:39:41 KEQ_(NOR)__90_C9_7706_5009_CAN(XianDai)_Newlap
Please help me solve the problem.
Thanks.
Click to expand...
Click to collapse
So.if I understood correctly....
You have updated your unit (not joying) with the joying Android 6 firmware. And now you have issues on boot as it appears a message that "ui and mcu dont match"
Do your unit boot?
Apparently joying has been placed a security check to avoid others use their software....
You have to enter into recovery menu to downgrade to your seller Android ROm.
Check on forums how to get into recovery.
Some guy wrote about plugging a keyboard and some key combination resulted into recovery menu.
There you can force to upload a new software (this time use the one supplied by your seller)
Enviado desde mi D6603 mediante Tapatalk
ikerg said:
So.if I understood correctly....
You have updated your unit (not joying) with the joying Android 6 firmware. And now you have issues on boot as it appears a message that "ui and mcu dont match"
Do your unit boot?
Apparently joying has been placed a security check to avoid others use their software....
You have to enter into recovery menu to downgrade to your seller Android ROm.
Check on forums how to get into recovery.
Some guy wrote about plugging a keyboard and some key combination resulted into recovery menu.
There you can force to upload a new software (this time use the one supplied by your seller)
Enviado desde mi D6603 mediante Tapatalk
Click to expand...
Click to collapse
The boot is normal. I asked the seller, but I do not know how to get into recovery mode.
I still do not have enough information.
10.1 인치 쿼드 코어 안드로이드 5.1 자동차 DVD 플레이어 기아 스포티지 2011 2012 2013 2014 2015 자동차 라디오 스테레오 gps 네비게이션 시스템
s.aliexpress.com/ruQJ3YRr
(from AliExpress Android)
That's the product I bought.
doitright6 said:
That is *NOT* the product you own. The specifications on that product indicate "RK3188 Cortex A9 Quad Core 1.6GHz CPU"
Yours is clearly an Intel/Sofia x86 CPU, which is so different that if you tried to install intel/sofia firmware on the rk3188 unit, it definitely would not boot.
Now there is something I find extremely interesting about your unit;
the MCU string indicates that it is an FYT5009 unit, just like the Joying, but with a manufacturer of "KEQ". Up until now, we have only seen Joying units with the FYT5009. If you can figure out how to load the Joying MCU firmware on there, then it just might work. This might be accomplished by just re-running the update process. There is a file that you would have to rename though -- 5009_20.zip has to be renamed to 5009_60.zip.
But beware; there is also the possibility that the Joying MCU firmware could brick the thing. I doubt it though, it is likely that yours is built from the same schematics.
Click to expand...
Click to collapse
The product is SOFIA chipset is right. It is written by the seller differently from the actual one.
I will attach an image link before the update.
Blog.naver.com/no0496/221001239611
As doitright6 said, it is not a joying product, but it could be updated in the same way.
I will attach the updated JOYING 6.0 firmware and my unit's 5.1.1 genuine firmware.
Please let me know how to fix it.
[JOING 6.0]
drive.google.com/open?id=0BymwBAxBOI-TU0pMQ2REZmV3djA
[my unit 5.1.1]
drive.google.com/open?id=0BymwBAxBOI-Tb0xLV0pjR2JHcXM
Thanks.
My Android unit is not a joying product. However, I am using the same CPU chipset (intel sofia).
Joying has been updated to the new version of Android 6.0, so it Like that string "UI and mcu does not match". I have genuine firmware but I can not downgrade it.
Help me eliminate red letters and yellow background in my product.
I can not attach a photo because I am a new member. Sorry.
My product information is
Android Version: 5.1.1
CPU Info: Intel ATOM 4QuadCore. GPU4D: MALI450 MP4
System Info: APP 1024x600 2016-10-09 19:11:44
MCU Version: 2016-10-19 11:20:27 RUL_(NOR)__90_C9_685x_5009_CAN(DaZhong)_Newlap
Please help me solve the problem.
Thanks.
Enter in System /app folder and edit fyt.prop
change line
ro. build. fytmanufacturer=xx
with
ro.build.fytmanufacturer=9
save the file.
Use a root acces file explorer like solid explorer, with root privileges.
Reboot, may be done.
Hi
How Can I know which MCU I should use
If my MCU looks like MCU version 5.3.1836-13E50201-160106
Thank you
Did this helped i am also stucked on the same situation
guys
have you solved this issue , please help me too
Omer.afzal said:
Did this helped i am also stucked on the same situation
Click to expand...
Click to collapse
helmi_zr1 said:
guys
have you solved this issue , please help me too
Click to expand...
Click to collapse
Did you both miss post #6? If that doesn't work, what was your result? Failing that - what does the reseller suggest?
javierortiz2 said:
Enter in System /app folder and edit fyt.prop
change line
ro. build. fytmanufacturer=xx
with
ro.build.fytmanufacturer=9
save the file.
Use a root acces file explorer like solid explorer, with root privileges.
Reboot, may be done.
Click to expand...
Click to collapse
sir
i have been trying to change the no. but couls not able to do it
kindly let me know whats the easy way
You're not going to be able to do it if you have not rooted your HU.
nic2k said:
You're not going to be able to do it if you have not rooted your HU.
Click to expand...
Click to collapse
thank you i will try to root my device and let you
helmi_zr1 said:
thank you i will try to root my device and let you
Click to expand...
Click to collapse
thank you sir the top message have been removed
thank you so much for your help :good::good::good::good:
now one more thing
how i can downgrade to the old firmware since i saw the file in my HU but when i try to selected the unit is not doing any things
do you have any idea ?
please help!
Hi!
I want to ask for help. I have a radio that the seller has corrupted with an update. the update was not good. i put up joying software and it works properly with it, but in the yellow bar above there is that "UI AND MCU DOEST NOT MATCH".put the latest update on it.2020-04-07.
thank you!
managed to root the device but fyt.prop filet is not included in the System / App folder. what could be the solution
land Mou [email protected] 16:26 4)
-keys
System Info
kernel:#1 SMP PREEMPT Tue Apr 7 12:20:56 CST 2020
platform 12)6313 LFN Full Band carplay
touch:goodix 911_1060 (5a422c2b)E:0
panel:none
radiotype:nxp6xXx_6686(dft)(0)
audiotype:dsp55
APP 1024x600 2020-04-09 09:10:18
System 2020-04-07 12:15:23 Tuesday
03L G23P46F04 veT. 1.U
EO/2020:03:2:16:50:18 blink
HTXY
---------------Device Status
System Application Info
System Application Information
CPU Info
CPU:Intel X86_Octa-Core 1.8GHZ [email protected] GB(Memory) + 64 GB(Storage)
MCU Version
2019.11.18 09:58:08 KEQ_53_C63L_G23P48F64_Ver: 1.0
Bluetooth Version
BLINK 2161_RELEASE0/2020:03:2:16:50:18_blink
javierortiz2 said:
Enter in System /app folder and edit fyt.prop
change line
ro. build. fytmanufacturer=xx
with
ro.build.fytmanufacturer=9
save the file.
Use a root acces file explorer like solid explorer, with root privileges.
Reboot, may be done.
Click to expand...
Click to collapse
Do you know the manufacturer number for this MCU?
MCU version: 2020.08.21 17:11:25 YIN_53_L82_G23P48F64_V:1.0
Thank you.
javierortiz2 said:
Enter in System /app folder and edit fyt.prop
change line
ro. build. fytmanufacturer=xx
with
ro.build.fytmanufacturer=9
save the file.
Use a root acces file explorer like solid explorer, with root privileges.
Reboot, may be done.
Click to expand...
Click to collapse
how can i enter i no found folder fyt.prop help
Hello friend i have the same problem i had rooted device and did change number 43 to 9 you had written, but screen warning now like written like this
UI AND MCU DOES NOT MATCH! (PCBA)
do you have a solution?
javierortiz2 said:
Enter in System /app folder and edit fyt.prop
change line
ro. build. fytmanufacturer=xx
with
ro.build.fytmanufacturer=9
save the file.
Use a root acces file explorer like solid explorer, with root privileges.
Reboot, may be done.
Click to expand...
Click to collapse
e
I can't find fyt.prop file and I had rooted. I have android 10 , is there another solution?
In the same boat. Found the file in CX file explorer (yes, I'm rooted and CX is in root mode), but it won't save my changes ("Cannot save the file".).
Is there a known way to edit and save the fyt.prop file?
At least I only have $20 and a few evenings invested (I found my unit brand new at a thrift store). Been one of my better behaved ones but I got greedy on updates. Also, I flashed the wrong file because I misread my MCU version number, and what *should* have been the right file loops when I try to flash it (reboots after the "CUSTOMER ID" text of the MCU update, have to reset to end the loop)... Whoops!
I bought one of these Chinese Android boxes that integrate with your existing head unit and I'm trying to find any information about it, and which forum I should be posting questions to. FWIW I have a VW Touareg with an RNS850 system that is basically the same thing as the Audi MMI 3g+ system, but with a touch screen.
Here is some model and version info:
Model: ZQ8002
MCU: TUREG-ZQAND-1.1
APP: MTK-8002_C37_GA1_DZSJ_DaZhong_EN_2019-05-27
Android: 6.0
CPU: 4 core 32-bit CPU Coetex-A7 @1.3G
RAM: 2GB
Flash: 16GB
Baseband Version: MOLY.WR8.W1449.MD.WG.MP.V61.P3
Kernel: 3.18.19 [email protected] #2
Hostname: fise8321_tb_m (seen via ADB shell)
It has a "Factory Settings" menu similar to other Android head units I've seen mentioned here. That presents a numeric keypad. I figured out a few codes for it:
0000: Bunch of debugging toggles, also toggle for ZLink CarPlay
5555: Just says "ok" when you enter it. I think this turns on ADB over TCP. I was able to ADB to it after this, but I had also use a terminal emulator to enable it.
9999: Single item to allow installation of "APP", which I assume is the firmware?
The box on Amazon: https://www.amazon.com/gp/product/B07PJGLD41/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
Main issues I'm trying to solve right now is that my skip track buttons on my steering wheel aren't doing anything, even though I can see the CAN bus events in the logs when I press the buttons. I'm hoping there's a Factory Setting code I haven't found that might let me change the CAN Bus settings. It has carCanBus and FactorySettings apks that I was able to decompile, but didn't find anything useful.
mondo1287 said:
I bought one of these Chinese Android boxes that integrate with your existing head unit and I'm trying to find any information about it, and which forum I should be posting questions to. FWIW I have a VW Touareg with an RNS850 system that is basically the same thing as the Audi MMI 3g+ system, but with a touch screen.
Here is some model and version info:
Model: ZQ8002
MCU: TUREG-ZQAND-1.1
APP: MTK-8002_C37_GA1_DZSJ_DaZhong_EN_2019-05-27
Android: 6.0
CPU: 4 core 32-bit CPU Coetex-A7 @1.3G
RAM: 2GB
Flash: 16GB
Baseband Version: MOLY.WR8.W1449.MD.WG.MP.V61.P3
Kernel: 3.18.19 [email protected] #2
Hostname: fise8321_tb_m (seen via ADB shell)
It has a "Factory Settings" menu similar to other Android head units I've seen mentioned here. That presents a numeric keypad. I figured out a few codes for it:
0000: Bunch of debugging toggles, also toggle for ZLink CarPlay
5555: Just says "ok" when you enter it. I think this turns on ADB over TCP. I was able to ADB to it after this, but I had also use a terminal emulator to enable it.
9999: Single item to allow installation of "APP", which I assume is the firmware?
The box on Amazon: https://www.amazon.com/gp/product/B07PJGLD41/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
Main issues I'm trying to solve right now is that my skip track buttons on my steering wheel aren't doing anything, even though I can see the CAN bus events in the logs when I press the buttons. I'm hoping there's a Factory Setting code I haven't found that might let me change the CAN Bus settings. It has carCanBus and FactorySettings apks that I was able to decompile, but didn't find anything useful.
Click to expand...
Click to collapse
Hi Mondo! How are you?, I've updated my interface like ypurs with a wrong MCU. Could you send my your? I need the file MCU TUREG-ZQAND-1.1. Thanks a lot. My email is [email protected]
Albe Vala said:
Hi Mondo! How are you?, I've updated my interface like ypurs with a wrong MCU. Could you send my your? I need the file MCU TUREG-ZQAND-1.1. Thanks a lot. My email is [email protected]
Click to expand...
Click to collapse
Hi Albe, is this something I could copy off of the unit? I have not had mine installed for a couple of years, but I am interested in trying to get this thing updated to possibly fix some of the issues I had with it. It may be a long time before I work on it, but if you could provide the file system path to copy the MCU file, I will provide it for you. If it's more involved than just copying a file, just let me know what I need to do or link me to a guide. Thanks!
mondo1287 said:
Hi Albe, is this something I could copy off of the unit? I have not had mine installed for a couple of years, but I am interested in trying to get this thing updated to possibly fix some of the issues I had with it. It may be a long time before I work on it, but if you could provide the file system path to copy the MCU file, I will provide it for you. If it's more involved than just copying a file, just let me know what I need to do or link me to a guide. Thanks!
Click to expand...
Click to collapse
I don't know how is it possible to exctract the MCU file (.bin) by the interface. I could try to find online anything to do it. i try to find softwars and so on, if i'will try i tell you something. I send many mails to producer of the unit, but everytime i do it, he tell me to waiting for response of the engineering department......and i wait. My MCU was TUREG-ZQAND-1.3 but i think your version 1.1 coluld going rigt for mine.
Not (android-auto) requested moderator move to Android head units forum.
mondo1287 said:
Hi Albe, is this something I could copy off of the unit? I have not had mine installed for a couple of years, but I am interested in trying to get this thing updated to possibly fix some of the issues I had with it. It may be a long time before I work on it, but if you could provide the file system path to copy the MCU file, I will provide it for you. If it's more involved than just copying a file, just let me know what I need to do or link me to a guide. Thanks!
Click to expand...
Click to collapse
Hi Mondo. I've find how could you extract the MCU file from your ZQ android interface. read the thread that i link you now! I wiat for your reply. https://www.androidiani.com/forum/autoradio-android/546699-f-q-px5-autoradio-android.html. At the end of Point "2" you can read how to export your mcu file! Thanks a lot and best regards.
Hey there
My Head Unit is no longer saving the last used memory and the radio just stopped working this week.
I am looking for custom firmware to try and hopefully get my unit working properly.
I have searched online and with not a lot of luck. I found someone with custom Firmware on Youtube
but I have used his firmware on another unit a few years back and you can't turn off the auto screen saver option
so I would rather not use his firmware again.
Any Help?
My specs:
Pumpkin Android Radio
Model: px5 (1024 x 600)
Android Version: 10
Last security Update: 5. May 2020
Build NUmber: rk3368-userdebig 10
Kernel-Version: 4.19.111
MCU-Version: MTCU_HT_V3.71_1 Dec 19 2020
CPU: Octa-core Cortex-A53 @ 1.5G
Memory: 3937 MB
I hope someone can help
Thank you in advance.
The file I uploaded is the firmware update the seller sent to me.
Seller instructions:
Update methods:
Download the link on your computer--Don’t unzip the file update.zip. Copy this file " update.zip" to the USB root directory. Connect the USB stick to the USB port of the radio. If the radio detects the update immediately and wants to install it, click on Cancel.
Then open Settings> System> System Updates> tick the box > click Install.
I installed it all Okay. Still have the same problems.
I also found this firmware
Hal9k_Mod_5.0_MTCx_HCTx_PX5_eng.rar
From
And it also installed Okay. Looks very different (I don't really like it that much, far too bright) however I still have the same problems.
I am starting to think it's a hardware problem.
I will post back after trying something else.
techno489 said:
Factory yhss1_PX5-A10-rk3368-MTCU_HT(20211111).zip
Click to expand...
Click to collapse
This firmware is based on the custom firmware of "Factory yhss1_PX5-A10-rk3368-MTCU_HT(20211111)"
Яндекс
Найдётся всё
disk.yandex.ru
techno489 said:
The file I uploaded is the firmware update the seller sent to me.
Seller instructions:
Update methods:
Download the link on your computer--Don’t unzip the file update.zip. Copy this file " update.zip" to the USB root directory. Connect the USB stick to the USB port of the radio. If the radio detects the update immediately and wants to install it, click on Cancel.
Then open Settings> System> System Updates> tick the box > click Install.
I installed it all Okay. Still have the same problems.
I also found this firmware
Hal9k_Mod_5.0_MTCx_HCTx_PX5_eng.rar
From
And it also installed Okay. Looks very different (I don't really like it that much, far too bright) however I still have the same problems.
I am starting to think it's a hardware problem.
I will post back after trying something else.
Click to expand...
Click to collapse
You even did not tell anything about your issues you are facing. What do you mean with:
My Head Unit is no longer saving the last used memory and the radio just stopped working this week.
Click to expand...
Click to collapse
So really think about that and communicate correctly.
The same would be if you call your workshop that your car does something wrong and don´t tell them what happens.
Would you get any instructions? I think not.
So tell us the issues and then thee might be some answer possible.
@localos : I think just pushing links to any firmware version without having a bug report does not make any sense.
I need help to update my mcu xl6125 android system