Related
edit : As of today - 28th June, this method ONLY works on the H815 EU models
update 26th July : Please go check the dream team's ROOT thread located here : [ROOT] TMO/VZW/ATT/SPRINT/INTL Root your LG G4 with Low Effort Root!
Thanks @thecubed , @autoprime , @IllegalArgument & @jcase for their hard work
Hi guys, a quick step by step guide to how I was able to unlock, install TWRP and Root my H815. Please don't hold me responsible if any issues arise with your phone. If you do this, you take your own responsibilities.
I tend to download all the tools in a single folder so it is easier to manage.
The LG Site:
1. go to this LINK and register.
2. you will get a confirmation email.
3. go to this LINK to unlock your bootloader (you will find the information on how to get your IMEI and Device ID lower in the post)
Your PC :
1. Be sure to have the LG drivers (i connected my phone first, it automatically installed the drivers on the computer.
update 27th July : thanks @the_scotsman in case you have driver issues please download these provided by @autoprime : LGUnitedMobile_Win_Driver_Ver_3.14.1
2. Be sure you have installed the ADB stuff that can be found here : Minimal ADB & Fastboot & ADB Installer (type Y to all the questions asked)
Install Minimal ADB first. Then type Y to all the questions the ADB installer asks. Close both windows once done.
Download TWRP 2.8.7. for H815:
1. go to this LINK and download it. Add it to your folder
Download SuperSu 2.46:
1. Download SuperSu 2.46 HERE (thanks @Chainfire ) and add it to your folder
PC & G4 love :
Once you are sure you have completed all the above tasks start rolling :
A. Enter your IMEI on the LG page
- you can find your IMEI on the G4 by going to settings > about phone > status
B. Get your Device ID:
1. hook up your LG on your PC (be sure not to be locked on your lockscreen, That USB debugging is checked and OEM checked in the Developer Options)
2. launch your CMD and type:
Code:
adb reboot bootloader
your phone will reboot
3. type this to get your Device ID
Code:
fastboot oem device-id
4. You will see two lines of number. Copy them and paste them together (to make one line) in the the Device ID fields on the LG site.
5 type :
Code:
fastboot reboot
5. close CMD
5. click Confirm on the site and you will receive by email a file called : unlock.bin.
Unlocking your bootloader:
1. once you get your LG email, save the unlock.bin in your folder
2. launch CMD from the folder (hold shift, right click the folder)
3. in CMD type :
Code:
adb reboot bootloader
4. once your phone is rebooted in bootloader type :
Code:
fastboot flash unlock unlock.bin
5. then reboot your phone by typing :
Code:
fastboot reboot
Normally your phone now has it's bootloader unlocked. When it boots you should see a message on the top left of the screen saying that.
COPY SuperSu and the downloaded TWRP file onto your phone (i put it in the download folder in the phone, not the SD) so you are ready for the next steps
Booting TWRP via ADB and bootloader mode
I personally think this was the easiest way to be able to root and clean install TWRP. Be sure your TWRP is in the folder.
1. Launch CMD from the folder (hold shift, right click the folder)
2. type (again) :
Code:
adb reboot bootloader
3. once your phone reboots and is in bootloader mode type :
Code:
fastboot boot TWRP2861.img
the new name of the file
or
Code:
fastboot boot p1.img
if you didn't rename it.
4. now you will reboot into TWRP.
Installing SuperSu
1. once you are in TWRP click install and go find your SuperSu file.
2. Swipe to install.
3. Once installation is done, reboot to system.
Once you have rebooted into the OS you will find the SuperSu app. Download the TWRP manager just to have it handy. And now i would install the TWRP file you have copied on your phone with flashify. I think it's a great tool.
2 ways to do it:
1. locate the file, click on it and choose to open with flashify then choose recovery and follow the steps
2. find the file via flashify and install.
(Don't download TWRP for H815 in the TWRP manager or Flashify as they are not fixed by @wolfgart (correct me if I am wrong))
once all this done and rebooted. Your phone will have TWRP and would be Rooted. Choose the TWRP manager to boot into recovery when you want.
I preferred to reboot the phone every time just to be sure...
If you have any comments, or i wrote something wrong, don't hesitate to correct me.
Have fun
UPDATE : Thanks to @autoprime you can also update your H815 EU to the latest Stock ROM : 10C (don't forget to thank him, as those guys are working hard to make your life easier!)
@the_scotsman, maybe you can pin this to help the lost souls until a one app does it all appears?
Well that was quick.
mediumraresteak said:
Well that was quick.
Click to expand...
Click to collapse
Looks like it depends on getting info from LG... let's see how long that lasts!
Forgive me if im mistaken but there are already like 3 threads about this i believe.
Sent from my LG-H815 using Tapatalk
I read the LG boot unlock affects streaming services. Can you tell me if it's still possible to stream music from the google play music app, and also YouTube ? Cheers.
barondebxl said:
Forgive me if im mistaken but there are already like 3 threads about this i believe.
Sent from my LG-H815 using Tapatalk
Click to expand...
Click to collapse
I have seen threads discussing about it yes, but haven't seen a clear guide on "how to" do it. Please enlighten me and i will ask this thread to be deleted. I don't like multi threads on the same subject, so i would be the first to ask that this thread be deleted.
pcoulson said:
I read the LG boot unlock affects streaming services. Can you tell me if it's still possible to stream music from the google play music app, and also YouTube ? Cheers.
Click to expand...
Click to collapse
I haven't had any issues with DRM, Camera or netflix streaming
SAO said:
I have seen threads discussing about it yes, but haven't seen a clear guide on "how to" do it. Please enlighten me and i will ask this thread to be deleted. I don't like multi threads on the same subject, so i would be the first to ask that this thread be deleted.
I haven't had any issues with DRM, Camera or netflix streaming
Click to expand...
Click to collapse
Yeah there arent any other guide, just threads discussing it. It just seems a lot since the LG site is pretty clear and self explanatory.
Sent from my LG-H815 using Tapatalk
I'm stuck on "fastboot oem device-id" command in cmd. Everything up to that point goes smoothly.
command line says "waiting for device" and the phone screen doesn't show phone ID, but gives me options 1-3. 1 being to show device ID, can't remember what the other ones are now. But I can't select "1". What am I doing wrong?
I have USB debugging on, also the OEM unlock is checked in development options.
Eclap78 said:
I'm stuck on "fastboot oem device-id" command in cmd.
command line says "waiting for device" and the phone screen doesn't show phone ID, but gives me options 1-3. 1 being to show device ID, can't remember what the other ones are now. But I can't select "1". What am I doing wrong?
Click to expand...
Click to collapse
unplug your device, if you can't restart it, by keeping your finger pressed for 10 seconds on the power button, take battery out.
Once you put the battery back in, restart the phone, plug in the phone in the computer, restart the CMD, and start the procedure again. :
2. launch your CMD and type:
Code:
adb reboot bootloader
your phone will reboot
3. type this to get your Device ID
Code:
fastboot oem device-id
SAO said:
unplug your device, if you can't restart it, by keeping your finger pressed for 10 seconds on the power button, take battery out.
Once you put the battery back in, restart the phone, plug in the phone in the computer, restart the CMD, and start the procedure again. :
2. launch your CMD and type:
Code:
adb reboot bootloader
your phone will reboot
3. type this to get your Device ID
Code:
fastboot oem device-id
Click to expand...
Click to collapse
I've tried this a few times now, same outcome, same thing, don't get a code, only get the 3 options and the power off 10 second thing, which doesn't work btw, have to pull battery every time
The numbers should show on your CMD window on your computer not the phone.
If the CMD window only shows "waiting for device", did you try to shut the CMD windows?
SAO said:
The numbers should show on your CMD window on your computer not the phone.
If the CMD window only shows "waiting for device", did you try to shut the CMD windows?
Click to expand...
Click to collapse
ah, thought they were supposed to show on the phone screen.
not sure what you mean by shutting the cmd window? I just get stuck on that "waiting for device" message in cmd, at which point I unplugged the phone, did a battery pull and tried again. I've tried about 5 times now, I double checked everything, have all the drivers installed etc.
Oh, and I do have the h815 EU version of the G4. I'll keep digging.
Could someone try out netflix, camera, divx files, YouTube and all the things that people were afraid of loosing. I for myself would really like to root but I dont want to loose any functions by doing that.
Sent from my LG-H815 using Tapatalk
Pyrres said:
Could someone try out netflix, camera, divx files, YouTube and all the things that people were afraid of loosing. I for myself would really like to root but I dont want to loose any functions by doing that.
Sent from my LG-H815 using Tapatalk
Click to expand...
Click to collapse
I have no issues with Netflix, divx, camera or YouTube.
Just a reminder that this does not work with all H815's as of 6/5/15. I think those of us that got a non EU region specific H815's get stuck when requesting a bootloader unlock from LG. Most of us are getting "not found suffix" when trying to submit the IMEI# and device ID. Note: trying different internet browsers does nothing, so don't bother.
We'll have to wait for LG to either approve all region G4's or another method. Cheers for making a guide though.
AhsanU said:
Just a reminder that this does not work with all H815's as of 6/5/15. I think those of us that got a non EU region specific H815's get stuck when requesting a bootloader unlock from LG. Most of us are getting "not found suffix" when trying to submit the IMEI# and device ID. Note: trying different internet browsers does nothing, so don't bother.
We'll have to wait for LG to either approve all region G4's or another method. Cheers for making a guide though.
Click to expand...
Click to collapse
Thanks for the heads up.. i have put this in red in the first post.
Eclap78 said:
I'm stuck on "fastboot oem device-id" command in cmd. Everything up to that point goes smoothly.
command line says "waiting for device" and the phone screen doesn't show phone ID, but gives me options 1-3. 1 being to show device ID, can't remember what the other ones are now. But I can't select "1". What am I doing wrong?
I have USB debugging on, also the OEM unlock is checked in development options.
Click to expand...
Click to collapse
Got the same Problem and fixed it, because, that are restriction/Firewall/Domaincontroler/Groupright Problems on ur PC.
Here the link, were i short explain my problem. http://forum.xda-developers.com/g4/general/howto-unlock-twrp-root-1-thread-t3130538
And now i see there is a HOWTO Thread
SO i have doubled it :crying:
But same answers like here "we got like 5 Threads", but like u said @SAO NOT 1Thread were all-in-one is explained! :good:
Is there a reason why we have to temporarily boot into TWRP to install root and then install TWRP via a secondary method?
Like, why can't we just do a "fastboot flash recovery twrp.img" command to install TWRP like most other devices with an unlocked bootloader?
Does this method break DRM?
takuhii said:
Does this method break DRM?
Click to expand...
Click to collapse
yes
tried everything , every possible and suggested way...
with zenfone rootkit, showing 'Rooting Please Wait, Waiting For Device' on pc screen and 'Fastboot Cmd Waiting' on mobile screen...
tried with different ADB installer versions...
tried with rootzenfone app for mobile...
also with kingroot...
with pc & without pc...
still nothing
if someone know the solution please convey...
thanx in advance...
Asus zenfone 5 is one of the best devices from the Asus and recently it
also got the lollipop 5.0 update as promised by the company but this is
not the topic I am here to discuss the most easy way to root your asus
zenfone 5 and I already published a video guide on it on our YouTube
channel its HowTrends. So, those guys who are facing problems and tried
a lot of thing to root asus zenfone 5 and at the end they failed, we
recommend them to go through this simple, easy and one click root
procedure.
This rooting procedure is tested on the Asus Zenfone 5 (CG501) Android
Lollipop 5.0 and Android Kitkat 4.4.2 V2.21.40.44 and working fine.
However if something goes wrong by your mistake then please don't held
I m not responsible for it, so go ahead at your own risk ..
Pre-Required files:
1.Asus Zenfone 5 Lollipop Rootkit
Http://d-h.st/0S31
2. Asus Zenfone 5 Kitkat Rootkit
www.mediafire.com/download/mjg542cd5w8my7w/HowTrends-RootZenFone5KitKatv4-ww.zip
3. Intel adb drivers for PC
www.mediafire.com/download/hxjosurat8o6ubk/HowTrends-IntelAndroidDrvSetup1.1.5.exe
Step to Root Asus Zenfone 5 Lollipop/Kitkat:
Download intel drivers and install it to your PC and the download the
RootKit as per your android version lollipop or kitkat to your PC. (i.e for
kitkat download kitkat root kit and for lollipop download lollipop root kit)
Enable usb debugging on your asus zenfone 5. To enable it first go to
settings > about phone > system information > build number. Tap 7 times
on build number and you will get the devloper settings in your android
settings.
Go to developer settings and enable USB debugging and connect your
phone with PC via usb cable and you will get a popup on your phone
select there always allow.
Refer pic 1
This is all you need to do with your Asus Zenfone 5. Now go to the folder
where you downloaded the root kit.
Rootkit will be a zip file so first unzip it and then press and hold shift
button and right click on file folder and you will see "open command
window here" option. choose it.
Now in command box type "adb devices" (without comma) and hit enter
and if you get "demon started successfully" message in command then
close that command and go ahead to the next step. otherwise try again
all above steps.
Refer pic 2
This will be the final step, open file Root-zenfone.bat and wait till that
window close automatically, during this process your phone will be
rebooted 4-5 times but no need to worry it is the part of the rooting
process.
Once your device bootup and starts then search for SuperSu app in your
app list, if supersu app is there it means you have successfully rooted your Asus Zenfone 5 then you can unplug your device from PC and enjoy the root features to your Asus Zenfone 5.
Pic 3
Pic for understanding..
thnks for ur reply...
downloaded intel drivers from the given link but while installing the error showing up that 'This OS Not Supported-Windows'...
before this i download version 1.10.0 from its official website...
when i type adb devices in command prompt its showing my device in 'List Of Attached Devices' but after i run Root.bat and starts the process by pressing any key my phone shuts down and start the fastboot mode and it shows 'fastboot cmd waiting' and on pc it shows 'rooting be patient, waiting for device' at that time if i type 'adb devices' in command prompt then its showing 'List Of Attached Device' empty...
should i try with some other pc...
im using windows 8.1...
I m also using Windows 8.1
Do one thing go to fastboot mode then open root.bat in word pad the insert manually cmd in cmd ...examples fastboot <something> etc..all cmds copy from root.bat which is open in word pad then paste one by one cmd in cmd promt it will 100% work good luck
new to this things so unable to understand...
tried...
but out of my mind...
plz elaborate or give any screenshots...
I will tell u with screenshot tomorrow i m busy now... with explanation..
thats so nice of u brada... thnx alot in advance...
Step 1: go ro bootloader by pressing hold and press power + up volume key.
Step 2: go to How to trends zenfone 5 Lolipop root folder means i already give u link for that. Download it.
Step 3: goto files folder which is present in how to trends zenfone 5 lollipop root folder.
Take look in pic.
Hold left shift and right click that opens cmd prompt below codes just copy paste one bye one into cmd prompt.
fastboot flash /system/bin/resize2fs magic
fastboot flash /system/bin/tune2fs busybox
fastboot flash /system/bin/partlink supersu.tgz
fastboot oem start_partitioning
fastboot flash /system/bin/logcat installer
fastboot oem stop_partitioning
fastboot reboot
Done i hope u understand...
Look in...u can easily understand what i m saying..
Success...!!! - Zenfone 5 rooted...!
thnk u so much bro...
thnx alot for ur help & time...
finally got root access...
now i can use my data card directly on my mobile using OTG cable and with ppp widget 2...
thnx again...
vnyukey said:
thnk u so much bro...
thnx alot for ur help & time...
finally got root access...
now i can use my data card directly on my mobile using OTG cable and with ppp widget 2...
thnx again...
Click to expand...
Click to collapse
It works 100 % ...my pleasure hehe good luck happy to help
yasin0005 said:
It works 100 % ...my pleasure hehe good luck happy to help
Click to expand...
Click to collapse
Is it working on lollipop firmware version 3.24.40.87
Root Manually
harsh.patel19998 said:
Is it working on lollipop firmware version 3.24.40.87
Click to expand...
Click to collapse
The only way I got was manually. And to version .87 works. If your do not, manually do it will work .
yasin0005 said:
It works 100 % ...my pleasure hehe good luck happy to help
Click to expand...
Click to collapse
Worked for me, first time itself. Thanks for your effort. Now that my phone is rooted can you kindly refer me to sources where I can upgrade it to Lollipop. I've read many tutorials where they've shown how to upgrade to Lollipop from KitKat on a non-rooted device, but mine is rooted, so how do I upgrade?
Thanks, awaiting your reply.
tech321 said:
Worked for me, first time itself. Thanks for your effort. Now that my phone is rooted can you kindly refer me to sources where I can upgrade it to Lollipop. I've read many tutorials where they've shown how to upgrade to Lollipop from KitKat on a non-rooted device, but mine is rooted, so how do I upgrade?
Thanks, awaiting your reply.
Click to expand...
Click to collapse
No u must have to unroot mobile before upgrading u r ROM because official ROM required unroot if its rooted mobile u faced bootloop problem......so u first unroot it and then upgrade ...u can root again on new upgraded Rom by using same procedure which was given by me in previous post ....
yasin0005 said:
No u must have to unroot mobile before upgrading u r ROM because official ROM required unroot if its rooted mobile u faced bootloop problem......so u first unroot it and then upgrade ...u can root again on new upgraded Rom by using same procedure which was given by me in previous post ....
Click to expand...
Click to collapse
Thanks for the reply bro..that was quick help.
I tried to root my zenfone 5 as per the instructions but the phone is not rebooting it is stuckinthe screen which says " Asus- insearch of incredible" and the circle goes round and round .
Bibhuti777 said:
I tried to root my zenfone 5 as per the instructions but the phone is not rebooting it is stuckinthe screen which says " Asus- insearch of incredible" and the circle goes round and round .
Click to expand...
Click to collapse
First go to bootloader then recovery in recovery select reset option bootloop will b solved thank you
After installing the device drivers just update it in the device driver and repeat the process
To root your Sony X Performance phone ( I have the F8132 ) You must do this procedure till maybe in the future there is another method.
Unlock bootloader on Xperia X Performance
1) download the ADB-drivers utility here that you will need to install the drivers which enable flashmode to work on your pc. You will also need the Sony Performance X driver so your computer will connect to it properly here
2) Go here to download Android Studio Software which allows you to pen a cmd line and program the phone in flashmode. To save you lots of time and trouble, again, my instructions are much better and help you navigate to the places you need to be so this goes well. Disregard the Sony instructions because you will most likely ask yourself many questions and will not find answers.You will need to properly install the Android studio software to get it working the way you need. Upon install, check off Android SDK and Android Virtual Device. Click next. It takes a while to install. Open the software after it has been installed. It will tell you " No Android SDK found. Click next. Click next again to install the two prechecked updates which are Android SDK Platform and API25" ANdroid 7.1.1 (Nougat). Then click finished to start the install of those 2 updates. It will download files from the internet. This will take a while. Click inish when its done downloading. At the welcome window of Android Studio click on the "configure" button. Choose SDK Manager. There will be 3 tabs at the upper midline of the window. Choose the "SDK Tools" tab. Check off "Google USB Driver and Google Web Driver. Usually these drivers will not work to get your phone in fastboot mode. This is why I have instructed you to install the Flashtool-
drivers utility. Nonetheless, click on these and click on apply. Click accept the click next to download and install this update. Click finish after it has installed then click ok to close the software.
3) On your device, turn on USB debugging and turn on OEM Unlocking by going to Settings, then about phone. Go all the way down to build version and tap on it about 7 times. This will unlock Developer Options menu. To go into Developer Options once it is unlocked goto Settings, then Developer options . This menu is where you must turn on usb debugging and OEM Unlocking to proceed with the procedure.
4) After you have turned on usb debugging, turn your phone off. After its turned off, hold the volume down button while plugging the phone into your pc. Your computer should install drivers that will enable Flashmode.
5)Go here to have Sony give you the unlock code. Input your email address to get the code emailed to you with instructions. It takes just a minute to get the unlock code. DO NOT attempt
to unlock your bootloader with some other method. Odds are its a scam or virus or both and you will be screwed. Follow the steps to get the unlock code by putting in your IMEI
then you are suggested to follow my steps to unlock the bootloader. Keep the Sony page open for reference because once it is closed, you will have to redo the email process and
IMEI process again to get the same code. Youre unlock code never changes.
6) goto the file location C:\Users\PC-User\AppData\Local\Android\sdk\platform-tools where you will open a cmd prompt you must open a cmd prompt in only this folder to make this work. to do so , once in that specific folder
hold down your right mouse button and clock on the shift key then release the mouse button. This will open a pop up window where you can choose to " open command window here"
7) when the cmd window opens, copy and paste this "fastboot devices" directly AFTER the ">" symbol and paste it in the command line with no spaces. It should look lik this.
.........C:\Users\PC-User\AppData\Local\Android\sdk\platform-tools>fastboot devices.........
8)press enter button, your computer should respond in the cmd line with something that looks like this
......CB512A697c fastboot.......
This lets you know that your phone is in the correct mode and ready to be programmed.
9) to unlock your bootloader you then copy and paste directly the cmd code Sony gives you from there website "fastboot -i 0x0fce oem unlock 0XXXXXXXXXXXX" . It will look like this C:\Users\PC-User\AppData\Local\Android\sdk\platform-tools>fastboot -i 0x0fce oem unlock 0xxxxxxxx... The 0xxxx's are YOUR SPECIFIC Unlock code given to you by Sony. DO NOT get this from another other website or software otherwise you will probably be infected with some kind of virus of worse on your phone or computer.
10) press enter to intiate bootloader unlock procedure
11) once bootloader unlock is successful you will see the cmd line spell out this "OKAY [ 1.165s] finished. time: 1.168s" The seconds mean nothing. You do want it to say OKAY!
12) reboot the phone and you will see an annoying warning that cant be undone, which says " your device has been unlocked and cant be trusted" No big deal but very annoying. The phone will work but you will see this everytime you reboot the phone.
13) It takes a while, several minutes, maybe 5, to have the phone bootup. When it does, you will see everything is in a weird language. You need to choose which language you want. to know which menu you must choose, just click on the very first down pointing arrow in the middle of the screen. A menu pops up and you can then choose the language you want. After choosing a language clock ok. Youre done!
Instructions to install TWRP so you can backup and restore your phone here
Thanks for the help, however I get this in the command screen
FAILED (remote: Command not allowed)
I do not get this phone from carrier, and have unlock bootloader allowed = yes , why would this happen to me
edit: everything is fixed now, only problem left is I'm stucked at MM
KWOKSFUNG said:
Thanks for the help, however I get this in the command screen
FAILED (remote: Command not allowed)
I do not get this phone from carrier, and have unlock bootloader allowed = yes , why would this happen to me
edit: everything is fixed now, only problem left is I'm stucked at MM
Click to expand...
Click to collapse
Maybe try Flashtool
ontwerp said:
Maybe try Flashtool
Click to expand...
Click to collapse
I've fixed this problem now
however just flashing the ftf normally wont help
u have to flash the ftf with exclude system.sin
then flash system with system.img
whoever want the system.img can just ask me
KWOKSFUNG said:
I've fixed this problem now
however just flashing the ftf normally wont help
u have to flash the ftf with exclude system.sin
then flash system with system.img
whoever want the system.img can just ask me
Click to expand...
Click to collapse
Can I have your FB/line? Thankss
I don't have X performance yet but I wanna ask a quick question: Will it lose its DRM key and lose camera quality after unlocking bootloader like the older models?
loveyoulovemetn said:
Can I have your FB/line? Thankss
Click to expand...
Click to collapse
PM
dont worry about flashing nougat though, flashing ftf normally will work now on updated flashtool
evildog1 said:
I don't have X performance yet but I wanna ask a quick question: Will it lose its DRM key and lose camera quality after unlocking bootloader like the older models?
Click to expand...
Click to collapse
bump this question as I think the answer is "Yes, it will lose"
huangjs said:
bump this question as I think the answer is "Yes, it will lose"
Click to expand...
Click to collapse
Damn then i'll wait until someone found root exploit.
evildog1 said:
Damn then i'll wait until someone found root exploit.
Click to expand...
Click to collapse
I saw on gfan DRM key can be "regenerated".
However, it's not the one you had before unlocking.
But who cares as long as it will let Sony engine works.
Unlocked bootloader allowed NO!
Is there a Root trick for the Device Lock Bootloader?
I use SOFTBANK series (DOCOMO).
Hi
sorry if post is duplicated , i search but not found on this topic
When i connect my mobile to pc and then run command to go to bootloader ,
it shows Daemon not running. Starting it now on port 5037
then goes to bootloader
in bootloader no command work there , means only adb reboot bootloader works
even fastboot devices shows nothing
please advise me what i have to do
Sorry for my bad English
Thanks
if from your pc you type:
adb reboot bootloader
does it go to the bootloader?
If so, while the bootloader is displayed, from the pc if you type:
fastboot devices
Are you saying it responds with nothing?
minhas4all said:
Hi
sorry if post is duplicated , i search but not found on this topic
When i connect my mobile to pc and then run command to go to bootloader ,
it shows Daemon not running. Starting it now on port 5037
then goes to bootloader
in bootloader no command work there , means only adb reboot bootloader works
even fastboot devices shows nothing
please advise me what i have to do
Sorry for my bad English
Thanks
Click to expand...
Click to collapse
So I'm confused.
If I type "adb reboot bootloader" with my phone connected; it boots into fast boot mode and will accept fastboot commands.
it shows the "Fastboot" screen with the option to start the device if the power buttoned is pressed.
What are you trying to do?
Are you saying you don't get the screen?
Zargone said:
if from your pc you type:
adb reboot bootloader
does it go to the bootloader?
If so, while the bootloader is displayed, from the pc if you type:
fastboot devices
Are you saying it responds with nothing?
Click to expand...
Click to collapse
Thanks
when i enter fastboot devices
it does nothing just go to next prompt
nothing happen
i want to unlock bootloader and root
Thanks once again
tech_head said:
So I'm confused.
If I type "adb reboot bootloader" with my phone connected; it boots into fast boot mode and will accept fastboot commands.
it shows the "Fastboot" screen with the option to start the device if the power buttoned is pressed.
What are you trying to do?
Are you saying you don't get the screen?
Click to expand...
Click to collapse
Thanks
with me when I type "adb reboot bootloader" with my phone connected; it boots into fast boot mode but in fastboot no command works
i want to unlock bootloader and root
thanks
Did you remember to go into the developer options and enable USB Debugging and OEM Unlock?
jhs39 said:
Did you remember to go into the developer options and enable USB Debugging and OEM Unlock?
Click to expand...
Click to collapse
That was my next question.
jhs39 said:
Did you remember to go into the developer options and enable USB Debugging and OEM Unlock?
Click to expand...
Click to collapse
Yes
tech_head said:
That was my next question.
Click to expand...
Click to collapse
Yes
I root many phones
its easy
even i try other cables and 3 different laptops and pc
and the result was same
minhas4all said:
Yes
I root many phones
its easy
even i try other cables and 3 different laptops and pc
and the result was same
Click to expand...
Click to collapse
What drivers are you using.
I presume you are on a Windows laptop?
yes on windows 10
Sent from my PH-1 using XDA Free mobile app
Sounds like you're using an older fastboot, so you'll need to do fastboot -i 0x2e17 <whatever_command>
Or you can get the latest platform tools from https://developer.android.com/studio/releases/platform-tools#downloads
Did you install the essential phone drivers?
not sure about version but download some days back from links provided.. any ways thanks download from ur link then let u know
thanks
Sent from my PH-1 using XDA Free mobile app
ziddey said:
Sounds like you're using an older fastboot, so you'll need to do fastboot -i 0x2e17 <whatever_command>
Or you can get the latest platform tools from https://developer.android.com/studio/releases/platform-tools#downloads
Click to expand...
Click to collapse
not sure about version but download some days back from links provided.. any ways thanks download from ur link then let u know
thanks
crixley said:
Did you install the essential phone drivers?
Click to expand...
Click to collapse
Thinks so but can u provide me the links? thanks
How to : Xiaomi Mi A2 Bootloader Unlock
Warning
You will loose all your data. Make sure to backup. You are doing this at your own risk. Neither me nor xda is responsible for any bricked devices.
Text Guide
How to : Xiaomi Mi A2 Bootloader Unlock
1. Turn phone on. Go to Settings - System - About Phone. Scroll down to build number. Tap on it seven times. You will see a message "You are now a developer".
2. Go back, click on developer options. Enable OEM Unlocking and USB debugging.
3. Download MiUnlock tool zip file from downloads section. Unzip the file. Double click to execute the file called "miflash_unlock".
It will open the application, click on settings icon on top right of the application.
Click on check and follow the instructions. Once drivers have installed we can close the application.
4. Power off phone.
5. Press and hold volume down and power button at the same time. You will now boot into fastboot boot.
6. Connect phone to computer.
7. Download and unzip adb & fastboot linked in downloads section.
8. Windows users open command prompt. Mac/Linux users open Terminal. Navigate to the folder where you unzipped adb & fastboot.
Windows
Code:
fastboot devices
Mac & Linux
Code:
./fastboot devices
If your device shows up, drivers were installed correctly. If not, then drivers were not installed and you need to install them.
9. Unlock the bootloader.
Windows
Code:
fastboot oem unlock
Mac & Linux
Code:
./fastboot oem unlock
10. Phone screen will now ask to confirm the unlock. Use volume keys to highlight the correct option, and power to select. Once you press power button bootloader will unlock. Phone will reboot two-three times.
Video Guide
Downloads
MiUnlock Tool - http://xiaomi-miui-ota-3rdrom.ks3-c...1/3.3.525.23/miflash_unlock-en-3.3.525.23.zip
Latest ADB & Fastboot :- https://developer.android.com/studio/releases/platform-tools
Setup ADB and Fastboot (if above adb & fastboot do not work) - https://www.xda-developers.com/adb-fastboot-any-directory-windows-linux/
Hi,
I just received my Mi A2 6Gb 128GB device (EU-Device). Followed your guide (Windows) and on the command "fastboot oem unlock" I get the response "FAILED (command write failed (no such file or directory)) Finished. Total time : 0.002s". On the devices screen just comes the message "Press any key to shutdown".
The device runs on August Security Patch.
Do you have any idea what could be the problem? Do I have to unlock with the official Xiaomi tool?
der_daab said:
Hi,
I just received my Mi A2 6Gb 128GB device (EU-Device). Followed your guide (Windows) and on the command "fastboot oem unlock" I get the response "FAILED (command write failed (no such file or directory)) Finished. Total time : 0.002s". On the devices screen just comes the message "Press any key to shutdown".
The device runs on August Security Patch.
Do you have any idea what could be the problem? Do I have to unlock with the official Xiaomi tool?
Click to expand...
Click to collapse
what happens when you do fastboot devices?
have you enabled oem unlock and usb debugging in developer options?
munchy_cool said:
what happens when you do fastboot devices?
have you enabled oem unlock and usb debugging in developer options?
Click to expand...
Click to collapse
Yes, I enabled OEM Unlock and USB debugging. Fastboot devices just shows the device number (just like with my Nexus 5). ADB devices first showed "unauthenticated" but I fixed that.
Never had an error like this unlocking/flashing my Nexus 5
der_daab said:
Yes, I enabled OEM Unlock and USB debugging. Fastboot devices just shows the device number (just like with my Nexus 5). ADB devices first showed "unauthenticated" but I fixed that.
Never had an error like this unlocking/flashing my Nexus 5
Click to expand...
Click to collapse
do you have latest fastboot from google (linked in downloads)?
munchy_cool said:
do you have latest fastboot from google (linked in downloads)?
Click to expand...
Click to collapse
Yes. I did all the steps mentioned in the guide, including downloading fastboot from Google. Maybe I will try tomorrow again from my Linux-Desktop...
der_daab said:
Yes. I did all the steps mentioned in the guide, including downloading fastboot from Google. Maybe I will try tomorrow again from my Linux-Desktop...
Click to expand...
Click to collapse
yes, please try on Linux if you have a Linux machine.
was trying to help someone else with a Moto X4 with a similar issue. turned out to be the usb controller on their computer.
https://forum.xda-developers.com/moto-x4/help/fastboot-receiving-complete-commands-t3831357
Hey!
Great Tutorial. Followed it (windows version with adbdriver dot com already installed), unlock + root + magisk + module api2 enabler + arnova V1.4 in about 10min there is a huge difference in terms of picture quality for anyone wondering.
Yeah.. loving every bit of my Xiaomi curently
++
dodjob said:
Hey!
Great Tutorial. Followed it (windows version with adbdriver dot com already installed), unlock + root + magisk + module api2 enabler + arnova V1.4 in about 10min there is a huge difference in terms of picture quality for anyone wondering.
Yeah.. loving every bit of my Xiaomi curently
++
Click to expand...
Click to collapse
glad to be of help
munchy_cool said:
yes, please try on Linux if you have a Linux machine.
was trying to help someone else with a Moto X4 with a similar issue. turned out to be the usb controller on their computer.
https://forum.xda-developers.com/moto-x4/help/fastboot-receiving-complete-commands-t3831357
Click to expand...
Click to collapse
Thank you very much for your help. It really worked like it should once I used my linux desktop. :good:
Sorry for the inconvenience.
Got lazy starting up my linux machine lately - this will be a lesson for me to stick with Linux instead of Windows
dodjob said:
Hey!
Great Tutorial. Followed it (windows version with adbdriver dot com already installed), unlock + root + magisk + module api2 enabler + arnova V1.4 in about 10min there is a huge difference in terms of picture quality for anyone wondering.
Yeah.. loving every bit of my Xiaomi curently
++
Click to expand...
Click to collapse
Do you have a tutorial for rooting, magisk and enabling cameraapi2? Thanks
der_daab said:
Thank you very much for your help. It really worked like it should once I used my linux desktop. :good:
Sorry for the inconvenience.
Got lazy starting up my linux machine lately - this will be a lesson for me to stick with Linux instead of Windows
Click to expand...
Click to collapse
glad you got it worked out.
for your boot.img thing.
once you have flashed please boot into Android, install Magisk Manager and see how it goes.
Thanks a lot, followed your video and it worked perfectly. Using windows 10
bartoloandre98 said:
Thanks a lot, followed your video and it worked perfectly. Using windows 10
Click to expand...
Click to collapse
awesome :highfive:
how can I lock bootloader again?
thx
How to ulock bootloader without wipe data ?
I Just unlock my data is wiped.
Norisrahman said:
How to ulock bootloader without wipe data ?
I Just unlock my data is wiped.
Click to expand...
Click to collapse
It's impossible unlock/lock bootloader without wipe data
pack21 said:
how can I lock bootloader again?
thx
Click to expand...
Click to collapse
fastboot oem lock
data will be wiped
I unlocked the bootloader and then It started looping
So i flushed a rom with mi flush now im stuck on android logo what can i do?
Tomas... said:
I unlocked the bootloader and then It started looping
So i flushed a rom with mi flush now im stuck on android logo what can i do?
Click to expand...
Click to collapse
Me too.. all I did was unlock the bootloader.
---------- Post added at 03:10 AM ---------- Previous post was at 02:48 AM ----------
Tomas... said:
I unlocked the bootloader and then It started looping
So i flushed a rom with mi flush now im stuck on android logo what can i do?
Click to expand...
Click to collapse
Try the "fastboot -w" command while booted into fastboot. It will wipe all data but you'll get back into the OS.