Database Users

[Q] Is My Atrix Fixable?

My apologies, as I wasn't sure where to post this.
For a long time now I've been running CM7 both the nightlies and the weeklys with no issues. Yesterday I decided I would try Neutrino ROM and installed GT 2.5. After that I noticed I had no data connection so I attempted to patch the ROM using Notorious's recommendations to no avail so I installed 2.2 and the Google addons, Sync, etc..
All was working great, however everyone said 2.5 was better in the forums so I installed it again today and attempted to patch as explained and this time was successful. I had data connection again and all was well. About an hour later I went to use my phone and it was completely black.
I attempted to power it up and nothing happened. I finally had to pull the battery and was able to get it to boot up properly, however my data connection was gone again. I ran the sysctl -p command in terminal again and rebooted it to no avail. I finally decided to go back to 2.2 which worked properly last night, however after installing from the zip and the addon zips it went to the 'Dual Core' screen and then rebooted back to the 'Dual Core' screen and keeps doing that.
I attempted to go into Recovery Mode, however when it says 'Entering Recovery Mode' it just goes black and I can't power it back on. I then have to reseat the battery before I can get it to work.
I guess at this point, is there anything I can do to get my phone back? I've seen the hard brick messages and I don't have that (yet), but I am not sure, because I apparently can't get that far. Thanks for any help you can provide.
-Dave

Sounds like a hardware problem to me. I recommend taking it to a service center ( for me ATT has one I use.) and sometimes they can boot it up. Or they can maybe give you ideas.
Just to confirm you can't boot anything right??
Sent from my Atrix with XDA Premium App

Thanks for the response. I was unable to boot into Android Recovery, however I hadn't tried the others. After numerous searches I found information on how to use moto-fastboot to install RomRacer's Recovery image and after doing that I was able to get into Recovery (phew!). I did a complete wipe on the phone (Dalvik, system, etc) and installed Neutrino 2.2 with Lite gapps, United States (GPS), Sync, and Gtalk (for video) and shockingly it finally booted into the rom. I think at this point I'll leave it alone after restoring my apps via Titanium Backup.
My phone is now working again. Hopefully I can keep it that way.

JeRrYFaR said:
Thanks for the response. I was unable to boot into Android Recovery, however I hadn't tried the others. After numerous searches I found information on how to use moto-fastboot to install RomRacer's Recovery image and after doing that I was able to get into Recovery (phew!). I did a complete wipe on the phone (Dalvik, system, etc) and installed Neutrino 2.2 with Lite gapps, United States (GPS), Sync, and Gtalk (for video) and shockingly it finally booted into the rom. I think at this point I'll leave it alone after restoring my apps via Titanium Backup.
My phone is now working again. Hopefully I can keep it that way.
Click to expand...
Click to collapse
Awesome good to hear. I would change the title or at least add, solved problem
Sent from my Atrix with XDA Premium App

[Q] GT-i9500 has no OS installed.

Hi everyone I just recently purchased a used S4 the GT-i9500. Everything seemed fine until I got home. It detected my T-Mobile Sim fine but I could only access 2G data and could not connect to any WiFi network I came across. The rom was stock 4.2.2 and the phone was rooted pre purchase. So after fiddling around for a few minutes I discovered the previous owner had flashed TWRP v2.4.1.0 as his choice for a Custom Recovery. Now at this point I had decided to flash on a Custom Rom and of course I first made a backup before flashing on WanamLite. Now after attempting to flash it I immediately received a failure. I tried turning off the signature verification and it did not flash. Now in my frustration i attempted to wipe everything and tried flashing Omega Rom v14. Now i was able to go through with the installation and choose what I wished to install and when I pressed Install things went along smoothly until I hit the app SecSafetyAssurance.apk where it freezes. This is a bump that I've run into at least 5 times already. I changed certain options I wanted to install and eventually made it past this and I am prompted to reboot. Now when I do this to my dismay I just receive a black screen. Upon pulling out the battery and attempting to reboot I still receive a black screen. when I boot back into the Recovery and attempt to reboot the system from within TWRP it warns me saying No OS Installed Are you sure you want to reboot. Im at a loss of what to do. I have read about other members suggesting to use ODIN but I am very confused about how to access Download Mode in order to flash a stock rom from SamMobile.com. I could use a few tips or maybe a few options that I'm left with in order to obtain the operation of my phone again. I would like to get my phone back and Im sure some users can relate to how Im feeling so any help at all would be greatly appreciated. Thank you very much in advanced!

JmastahJay56 said:
Hi everyone I just recently purchased a used S4 the GT-i9500. Everything seemed fine until I got home. It detected my T-Mobile Sim fine but I could only access 2G data and could not connect to any WiFi network I came across. The rom was stock 4.2.2 and the phone was rooted pre purchase. So after fiddling around for a few minutes I discovered the previous owner had flashed TWRP v2.4.1.0 as his choice for a Custom Recovery. Now at this point I had decided to flash on a Custom Rom and of course I first made a backup before flashing on WanamLite. Now after attempting to flash it I immediately received a failure. I tried turning off the signature verification and it did not flash. Now in my frustration i attempted to wipe everything and tried flashing Omega Rom v14. Now i was able to go through with the installation and choose what I wished to install and when I pressed Install things went along smoothly until I hit the app SecSafetyAssurance.apk where it freezes. This is a bump that I've run into at least 5 times already. I changed certain options I wanted to install and eventually made it past this and I am prompted to reboot. Now when I do this to my dismay I just receive a black screen. Upon pulling out the battery and attempting to reboot I still receive a black screen. when I boot back into the Recovery and attempt to reboot the system from within TWRP it warns me saying No OS Installed Are you sure you want to reboot. Im at a loss of what to do. I have read about other members suggesting to use ODIN but I am very confused about how to access Download Mode in order to flash a stock rom from SamMobile.com. I could use a few tips or maybe a few options that I'm left with in order to obtain the operation of my phone again. I would like to get my phone back and Im sure some users can relate to how Im feeling so any help at all would be greatly appreciated. Thank you very much in advanced!
Click to expand...
Click to collapse
Well first thing is get the latest stock firmware for your variant from my sign and get odin 3.07
For download mode power off phone unplug,, press volume down home and power all together till something pops up and release then press volume up and connect to pc
Open odin click pda and select that firmware u downloaded start the process
For more info check my sign help thread link it has more options on the same
.

JmastahJay56 said:
Hi everyone I just recently purchased a used S4 the GT-i9500. Everything seemed fine until I got home. It detected my T-Mobile Sim fine but I could only access 2G data and could not connect to any WiFi network I came across. The rom was stock 4.2.2 and the phone was rooted pre purchase. So after fiddling around for a few minutes I discovered the previous owner had flashed TWRP v2.4.1.0 as his choice for a Custom Recovery. Now at this point I had decided to flash on a Custom Rom and of course I first made a backup before flashing on WanamLite. Now after attempting to flash it I immediately received a failure. I tried turning off the signature verification and it did not flash. Now in my frustration i attempted to wipe everything and tried flashing Omega Rom v14. Now i was able to go through with the installation and choose what I wished to install and when I pressed Install things went along smoothly until I hit the app SecSafetyAssurance.apk where it freezes. This is a bump that I've run into at least 5 times already. I changed certain options I wanted to install and eventually made it past this and I am prompted to reboot. Now when I do this to my dismay I just receive a black screen. Upon pulling out the battery and attempting to reboot I still receive a black screen. when I boot back into the Recovery and attempt to reboot the system from within TWRP it warns me saying No OS Installed Are you sure you want to reboot. Im at a loss of what to do. I have read about other members suggesting to use ODIN but I am very confused about how to access Download Mode in order to flash a stock rom from SamMobile.com. I could use a few tips or maybe a few options that I'm left with in order to obtain the operation of my phone again. I would like to get my phone back and Im sure some users can relate to how Im feeling so any help at all would be greatly appreciated. Thank you very much in advanced!
Click to expand...
Click to collapse
Flashing through odin is one option.... some users have reported that there were some hiccups when installing omega 14 because of the aroma script.....try a different rom...there are many others to choose from....or you could flash stock via odin as said on the earlier comment good luck

Feedback
Today I attempted to use ODIN to flash now I am still currently attempting this. When I press the volume down key, power, and home button it takes me to the custom recovery TWRP instead of download mode. The phone did this when I first purchased it. When I still had what appeared to be the stock rom it would always take me to the recovery. When I would use the volume up instead of down it would take me to the factory test mode now mind you this happened when the OS was still installed. When i try that combination now i just receive a blank black screen. Are there any other ways to boot into download mode?

[SOLVED] Suddenly G2 boots only into recovery mode (loop)

Sometime last night, my AT&T G2 (D800) decided to go from being powered on and idling, to going into TWRP recovery mode. All by itself. I saw this, unplugged it from USB, and tried to reboot into system mode. But it simply won't do anything except boot into recovery. Powering off, trying to get to the bootloader, none of that works.
This is not a custom ROM, it's 4.2.2 stock from LG. I only rooted the phone, which was several weeks ago, and haven't had any problems, aside from TWRP not wanting to back up anything. I've been using Android since the original TMO G1 with JesusFreke's ROM, so I have a pretty good idea of what I'm doing, hopefully.
The only recent changes I've made are:
I updated busybox about 3 days ago (but have rebooted fine since)
I grabbed several legit apps from the market last night
Last night I also DL'ed, but did not apply, a ~50MB OTA update that has been pending. I don't think that would install without explicit permission anyway, which I didn't give it?
This phone was encrypted from the start. Maybe that;'s what prevents TWRP backups,, but right now I'm seeing TWRP errors/logs saying something like "Unable to mount \data". And yet I can browse to other folders, and see filenames in \etc for example. However, I don't see any files at all in \boot.
Since this phone has no external memory, and it's customized and has numerous configured apps, I really really don't want to have to wipe it. Although at this point, that may not even fix the problem? Even if it did, since I haven't been able to make backup images, it would be a Bad Thing™ either way. (Yes, I do have a secondary plan with Titanium, with backups going to cloud storage, but these are tedious and now a few weeks old. And wouldn't restore the ROM & system en masse.)
Please help.

Solved?
I'm not sure what caused this to occur, but I found somewhat of a solution after digging deep into my Google-fu.
I followed the instructions in this XDA thread and it actually worked. I didn't have adb access, but I was able to use dd successfully. It allowed me to boot into the device, unencrypt it, then arrive at the lock screen.
However, when I put in the lock code, it went apesh!t and played multiple notification sounds, with a blue circular wait symbol. It also flashed the LED from green to blue, as it normally only does during boot. Once I pressed the power button, I was back back into TWRP.
So then I followed Step 2 again, and once in the phone, I used terminal to run the dd command from inside the OS. This might be what it ultimately needs, because the prior attempt in TWRP had an error to the effect of "no space left on device".
I can't call it Solved yet, but it looks good to at least be able to get in and use the phone. I'm backing up with Titanium before I do anything else and will reboot and test its permanency later.

I'm gonna close this thread now that I think I have a handle on what is going on. The fix does survive a reboot, so I believe it's possible to repair the issue permanently per the instructions above. I also ran the phone for 3 hours with heavy app usage and no problems.
I believe what may have happened is my OTA decided to override my choice to NOT update the ROM, as some have reported in this Reddit thread. There's a lot of good info in that one, including how to stop getting nagged by turning the OTA notifications off, or to freeze it entirely with Titanium Backup if rooted.
Anyway, what apparently happens is that when the OTA/upgrade goes to reboot, and encounters a custom recovery, it gets confused... when you try to power cycle or reboot again, it sees the stock recovery still hasn't run whatever it wanted, so it starts recovery again Lather, rinse, repeat.
Fun times.

I think I softbricked, but only CM13 seems to fix on my N7. What did I do/how to fix

Guys,
I'm not even sure where to start with what I'm seeing, but maybe you can help me.
I have had Timur's ROM on my N7 2012 for a couple years. It's been crashing randomly, even though I have few things installed on it, and a good power supply. I took it out of my car and put it on an iPad 2 amp supply, and it still crashed a bunch so I knew I needed to wipe and reinstall. I also wanted to go from 4.2.2 to 5+, which I know takes away a lot of the good features I need (like power on/deep sleep).
I booted into TWRP and wiped my tablet, which appeared to softbrick it (I think I have the usage right from searching). I downloaded the Pure Nexus 6.0.1, CM13, and already had Autodroid ROMs to use. I tried to install Pure through ADB sideload, and got it installed. When I finished and tried to reboot, it said I had no OS. When I rebooted, I got the boot animation, and nothing else.
Long story short, I tried Autodroid and CM13, and using CM13 I got it back going. Unfortunately, every time I try to flash another ROM over it, it will no longer go past the boot screen. With CM13, it boots properly, but doesn't like the gapps pico I tried to install (error message when booted, keeps returning to the same pop up error).
I'm quite sure there's something I'm missing, but I don't know what it is.
Thanks!
Eric

Ok, before anyone goes nuclear on me, I think I better understand what happened. When I got ANYTHING to work, I stopped doing anything. As I understand, it wasn't functioning...it was just in a temporary mode of some sort.
After not being able to get it to work properly, I used this: http://forum.xda-developers.com/showthread.php?t=1781250 to try and restore the system. I followed all the directions, except for using the 5.1.1 version of the ROM, and used the corresponding file name for the zip file used.
After doing so, the bootloader won't go to TWRP, but goes to the pic as seen below. I did reboot the tablet, and after waiting quite a while, the tablet came on, but I don't understand what that picture means.
Thanks!
Eric

Ok...I realized that I lost root. I'm fixing it now. I had read before, but didn't understand what I saw.
Thanks,
Eric

S4 hung on boot

I restarted my S4 this evening and now it won't boot past the SAMSUNG logo. I have tried a variety of things to get it going but none have worked.
1) Soft boot
2) Pulled battery and let it sit awhile
3) Tried to boot into Safe Mode (stuck on the same spot with no indication of going into safe mode)
4) Wipe cache from CWM recovery mode
5) Reboot from CWM recovery mode
Everything is pretty well backed up but after looking at my sdcard it appears that my camera reverted to internal memory about a month ago so I am after any ideas to get those images.
My phone is rooted and running an old 4.2.2 stock Android OS with USB debugging enabled. I was wondering if by re-flashing the OS it might fix the boot issue and be able to recover the images. Or maybe even flash CM. Or maybe some other thing. I found something about adb but I don't want to do anything else yet until someone more savvy than me weighs in.

Unless it's a hardware issue, then flashing a ROM might work.
The other option is to try a reflow. Reflow means heating your phone up so that the solder becomes liquid and any cracks in the solder (which can cause a bad contact), or any piece that isn't seated right, will be remedied.

did u tried to flash stock firmware using odin?

Deleted

I got it going. I first spent a number of hours getting to know adb which was a dead end because I couldn't get it to see beyond the base directory. I then just flashed the stock rom and everything was there including things that shouldn't be like apps, contacts and texts. The phone is back exactly where it was before it boot locked without having to mess with a single thing. I am grateful but a bit confused.