I just wanted to say thanks to the forum here. I recently purchased a 2002 VW Passat. I have a pile of parts building up in the trunk. Still waiting on the HU cage and Axxess ASWC-1. It looks like I won't be able to get to the install until next weekend.
Joying HU JY-UL128N2 Sofia 2 GB MTCD unit
128 GB SD
Sony 322 NDVR camera
32 GB Class 10
OBDII ELM 327
Back up Camera
Trim tool set
CARAV 14-004 HU cage
Scosche Adapter Harness
Metra Antenna Adapter
Axxess ASWC-1 Canbus Converter Box
This is the first radio install I have done in more than 20 years. I am looking forward to it. I just wanted to say thanks for all the great info I am finding here, and that there is support for the HU once I get it installed and up and running.
Hello
i have BMW F30 2012 with CIC-HIGHT 6 pin LVCDS I bought Android 7.1 NBT because the seller said to me if you have 6 LVCDS pin you must take the NBT version
then i have installed all fine the android unit start the head unit start and still freez and after 1 min shutdown and no signal ,idrive don't work ,and android unit still work fine the daschboard work fine i have change configuration to HARMAN , DVD 2 , IDRIVE 2 i have test all possibility i have change car type i have tested all and same problème thank's you for help
MCU Ver : 012042bJLY-NBT-HW7-180719[B1280_170325]
FraleWorkVer: px3-userdebug 7.1.1 NMF26X eng.work2.20180612.160309
OsVer : 3.0.101 + Tue Jul 3 15:40:35 CST 2018
APPVer : 20180707-Ver1.0.0.0001_1280x480_870A
Nandflash: 20,30G/26.88G
RAM : 958/2G
UUID: 010E6A88-3BFD-00B6-0000-000100001A88
Update MCU and ANDROID
i have make update for MCU version and ANDROID version and same probléme same button work and the other not work the croll idrive not work and the original car menu said no signal after freezing 30 seconde i hear the head unit cars shutdown after 30 seconde all wire is connected well
Same issue here, wiring is good connected and no signal.
When I connect my OEM screen to the wiring harness from the aftermarket Android unit I also have no signal. When I switch back to the original wiring harness it works just fine.
The issue is not the LVDS wiring but it's somewhere in the wiring harness that was supplied by Mekede or in the Android unit from Mekede.
I think the wiring because the Android part is working. But of course I need the OEM BMW system as wel.
Somebody same kind of issue? Hopefully someone has a genius idee to solve.my issue.
Greetings Aram
Verstuurd vanaf mijn Redmi Note 4X met Tapatalk
meram78 said:
Same issue here, wiring is good connected and no signal.
When I connect my OEM screen to the wiring harness from the aftermarket Android unit I also have no signal. When I switch back to the original wiring harness it works just fine.
The issue is not the LVDS wiring but it's somewhere in the wiring harness that was supplied by Mekede or in the Android unit from Mekede.
I think the wiring because the Android part is working. But of course I need the OEM BMW system as wel.
Somebody same kind of issue? Hopefully someone has a genius idee to solve.my issue.
Greetings Aram
Verstuurd vanaf mijn Redmi Note 4X met Tapatalk
Click to expand...
Click to collapse
i have tested 2 harness and the same probléme have you fix your problem ?
I hope I'm posting this in correct section. Has anyone got information on the newest Dasaita Max10-cp? I'm specifically curious about 1280x720 and Android 10
On AliExpress is says it's both 1024x600 and 1280x720 on same advertising page so it's very confusing.
Dasaita communication via messenger is very short answers and they don't seem to answer my questions maybe because there is a major language barrier.
It's supposed to have Android 10.0 among other things. If someone can provide some more info that would be great.
Sent from my Pixel 2 using Tapatalk
livethemountainlife said:
I hope I'm posting this in correct section. Has anyone got information on the newest Dasaita Max10-cp? I'm specifically curious about 1280x720 and Android 10
On AliExpress is says it's both 1024x600 and 1280x720 on same advertising page so it's very confusing.
Dasaita communication via messenger is very short answers and they don't seem to answer my questions maybe because there is a major language barrier.
It's supposed to have Android 10.0 among other things. If someone can provide some more info that would be great.
Sent from my Pixel 2 using Tapatalk
Click to expand...
Click to collapse
1280*720
changed 1 MID output to SUB output
Dual SUB Output
Integrated (builtin) carplay+Android Auto
ANDROID 10
Enviado desde mi SM-G975F mediante Tapatalk
Apparently it's 1024*600 but 1280*720 is coming middle 9r the end of July. This is what I was told by Amazon Dasaita rep.
Hi,
I also bought this PX6 Max10 1280x720.
I found some issues after a few days of use:
1. When no music is playing I can ear a backgroud noise. The seller (Aliexpress MTKNAVI Store) is sending me a new RCA cable, still waiting for it...
2. I have a Toyota Rav4 2017 and with this Max10 all the lock doors settings doen't work such as:
- Lock all doors over 20kms/h
- Unlock when shifting P
- Driver lock button doesn't lock all doors
After speaking with Dasaita over FB Messenger they told that there is a new Canbus version and the seller MTKNAVI is sending me the new one.
So far, all the issues has been addressed by Dasaita and the Seller.
Try to reach Dasaita over Facebook Messenger.
pedromfaria said:
Hi,
I also bought this PX6 Max10 1280x720.
I found some issues after a few days of use:
1. When no music is playing I can ear a backgroud noise. The seller (Aliexpress MTKNAVI Store) is sending me a new RCA cable, still waiting for it...
2. I have a Toyota Rav4 2017 and with this Max10 all the lock doors settings doen't work such as:
- Lock all doors over 20kms/h
- Unlock when shifting P
- Driver lock button doesn't lock all doors
After speaking with Dasaita over FB Messenger they told that there is a new Canbus version and the seller MTKNAVI is sending me the new one.
So far, all the issues has been addressed by Dasaita and the Seller.
Try to reach Dasaita over Facebook Messenger
.
Click to expand...
Click to collapse
Known issue due to design defect.
marchnz said:
Known issue due to design defect.
Click to expand...
Click to collapse
Hi marchnz,
Which one is a known issue, the background noise or the door lock?
pedromfaria said:
Hi marchnz,
Which one is a known issue, the background noise or the door lock?
Click to expand...
Click to collapse
He means the background noise.
They released a rca plugs to avoid that noise...normally coming from the stock amplifier....
Customer must specify the version of the car in order to check if the rca is required.
Enviado desde mi SM-G975F mediante Tapatalk
livethemountainlife said:
I hope I'm posting this in correct section. Has anyone got information on the newest Dasaita Max10-cp? I'm specifically curious about 1280x720 and Android 10
On AliExpress is says it's both 1024x600 and 1280x720 on same advertising page so it's very confusing.
Dasaita communication via messenger is very short answers and they don't seem to answer my questions maybe because there is a major language barrier.
It's supposed to have Android 10.0 among other things. If someone can provide some more info that would be great.
Sent from my Pixel 2 using Tapatalk
Click to expand...
Click to collapse
I have just installed one Dasaita Max 10, Android 10, 1280x720.
Get mine in a few days. Will post thoughts here.
Just got mine. RAV4 2014 AWD cruiser with amplifier. I have the same problem with the hissing and background noise does anyone have a picture of the RCA cables that are supposed to fix the issue - it's not these?
woggles said:
Just got mine. RAV4 2014 AWD cruiser with amplifier. I have the same problem with the hissing and background noise does anyone have a picture of the RCA cables that are supposed to fix the issue - it's not these?
Click to expand...
Click to collapse
I have no idea what these rca cables are that people are talking about, but I doubt they remove hiss. I suspect these people are talking about ground loop noise which CAN be cancelled out with a special rca cable set.... but the hiss is coming directly from the unit itself.
I just ordered a dasaita max 10 and it's still in the mail but my old dasaita px5 is plagued with the same hiss issue which I was never able to get rid of. My guess is that my new max 10 will be the same. Fortunately I drive a jeep with a soft top and big mud tires.... which all pretty much drowns out the hiss
Are you connecting to your amp with the speaker level outs or the rca outs?
Bob_Sanders said:
I have no idea what these rca cables are that people are talking about, but I doubt they remove hiss. I suspect these people are talking about ground loop noise which CAN be cancelled out with a special rca cable set.... but the hiss is coming directly from the unit itself.
I just ordered a dasaita max 10 and it's still in the mail but my old dasaita px5 is plagued with the same hiss issue which I was never able to get rid of. My guess is that my new max 10 will be the same. Fortunately I drive a jeep with a soft top and big mud tires.... which all pretty much drowns out the hiss
Are you connecting to your amp with the speaker level outs or the rca outs?
Click to expand...
Click to collapse
I don't think I'm connecting to the amp at all (JBL Greenedge)! I didn't end up using any of the cables numbered 3 to 11 in the attached pic and 14 - 17 are for the reverse camera and factory aux connector. There is no input for it in the bundle of cable harnesses that I can find...am I missing something here?
Thanks for the help, I've asked the seller on Ali about the harnesses - I'll share his replies here.
I Installed mine yesterday and have some issues I bought this one.
C$ 642.79 35%OFF | Dasaita Car Multimedia 10.2" HD Touch Screen Android 10.0 for Toyota Highlander Radio 2015 2016 2017 2018
H5214-MAX10-CP-HD
Hopefully I am just missing something on my setup.
I have a 2018 Toyota Highlander LTD w JBL sound system
I bought the adapter that basically converts the speaker outputs to RCA for the factory amp. I also am using a 4chan Kicker amp so needed to use 4 male to 2 female y splitters to use both. No hiss
My issues are as follows hopefully there is a quick fix.
1. Bluetooth paired with Max10 but just basic info won't send contact info to HU.
2. Offline Nav does not see data without My Samsung Note 9 connected to the MaX10. Using supplied GPS antenna with strong signal.
3. NO Am radio at all ant is plugged in.
Any help would be appreciated. CHEERS
ToyotaJay said:
I Installed mine yesterday and have some issues I bought this one.
C$ 642.79 35%OFF | Dasaita Car Multimedia 10.2" HD Touch Screen Android 10.0 for Toyota Highlander Radio 2015 2016 2017 2018
H5214-MAX10-CP-HD
Hopefully I am just missing something on my setup.
I have a 2018 Toyota Highlander LTD w JBL sound system
I bought the adapter that basically converts the speaker outputs to RCA for the factory amp. I also am using a 4chan Kicker amp so needed to use 4 male to 2 female y splitters to use both. No hiss
My issues are as follows hopefully there is a quick fix.
1. Bluetooth paired with Max10 but just basic info won't send contact info to HU.
2. Offline Nav does not see data without My Samsung Note 9 connected to the MaX10. Using supplied GPS antenna with strong signal.
3. NO Am radio at all ant is plugged in.
Any help would be appreciated. CHEERS
Click to expand...
Click to collapse
1. Once paired to your Note 9 go to bluetooth settings on your phone and choose the connection to the headunit. You can see a gear . Push it and check the profiles for the connection. Ensure "contact access" is enabled.
In case it doesn't work. Remove the paired connection from both headunit and phone and pair again. I remember the same issue and corrected after deleting and pairing again.
2. Gps offline. Which offline gps did you installed? If you mean igo gps...perhaps maps were not included...note that installed igo is just a pirated copy if the software...so no support
Isuggest you to get a good offline navigator (like "tomtom or "sygic"....or the free "here maps")
3. Check on factory settings that you have setuo the radio correctly to your region (europe, America1, america2, asia...) password for factory settings = 126
Enviado desde mi SM-G975F mediante Tapatalk
Thanks for the help I can go the the gear icon I see phone connection for Calls and Audio but I am pretty sure it should say something more ? The reason I am asking is when on the Dasaita I hit the phone icon I can dial a number but not see any contact info?
ToyotaJay said:
Thanks for the help I can go the the gear icon I see phone connection for Calls and Audio but I am pretty sure it should say something more ? The reason I am asking is when on the Dasaita I hit the phone icon I can dial a number but not see any contact info?
Click to expand...
Click to collapse
I have the same problem - I'll try re pair and see if it fixes things.
"I bought the adapter that basically converts the speaker outputs to RCA for the factory amp. I also am using a 4chan Kicker amp so needed to use 4 male to 2 female y splitters to use both. No hiss"
Do you have pictures or a link to these?
ToyotaJay said:
I Installed mine yesterday and have some issues I bought this one.
C$ 642.79 35%OFF | Dasaita Car Multimedia 10.2" HD Touch Screen Android 10.0 for Toyota Highlander Radio 2015 2016 2017 2018
H5214-MAX10-CP-HD
Hopefully I am just missing something on my setup.
I have a 2018 Toyota Highlander LTD w JBL sound system
I bought the adapter that basically converts the speaker outputs to RCA for the factory amp. I also am using a 4chan Kicker amp so needed to use 4 male to 2 female y splitters to use both. No hiss
My issues are as follows hopefully there is a quick fix.
1. Bluetooth paired with Max10 but just basic info won't send contact info to HU.
2. Offline Nav does not see data without My Samsung Note 9 connected to the MaX10. Using supplied GPS antenna with strong signal.
3. NO Am radio at all ant is plugged in.
Any help would be appreciated. CHEERS
Click to expand...
Click to collapse
I have IGO nav on my Dasaita px5 and it is most definitely an off line system which does not require a connection. As @ikerg suggested maybe you didn't download the updated maps for your area? If you're talking about google or waze or some nav system like that... they are not really off line systems.
As noted on my above post, I haven't got my max 10 yet (still in the mail. It might come within the next 5 years or so given the speed and accuracy of China Post!) but I did notice with my px5 the request for permission to download bluetooth information (contacts, recents... etc) always came in like 10 or 15 minutes after initial pairing. Never did figure out why the delay, but give it a little while.
Interesting about the lack of hiss. I'm using the rca's directly off the back of my px5 (which I always assumed to be cleaner than the speaker outputs) to my amps and I DO get hiss. Even when volume is ZERO you can faintly hear it. Maybe I will try the speaker outputs
Sorry to be clear I am using the 2v rca outputs as well the y splitters are used for the adapter to the JBL factory amp and to my Kicker amp connected to the outputs from the HU . I guess Dasaita made this adaptor to send a better signal to the factory Amp to get rid of that noise Is my guesstimate Others have said it fixed their issues on the JBL system
And your right probably need to connect through hotspot again and go to maps and download the offline data just like my phone not used to a andriod HU as a stereo replacement.
Anyone know how to get the Max10 to auto pair with my hotspot I leave it on the phone side but have to keep hitting the wifi connection every time .The system setting is set to auto connect i believe.
OK FIXED the Max 10 Bluetooth issue after pairing go to phone icon on Dasaita hit the Sync button two arrows doing the spin third button down on the right menu . Then the request for sharing contact info showed up on the phone request and voila!
ToyotaJay said:
Sorry to be clear I am using the 2v rca outputs as well the y splitters are used for the adapter to the JBL factory amp and to my Kicker amp connected to the outputs from the HU . I guess Dasaita made this adaptor to send a better signal to the factory Amp to get rid of that noise Is my guesstimate Others have said it fixed their issues on the JBL system
Click to expand...
Click to collapse
Ah ok, so it arrived with your order? I guess I'll need to try and get them to ship the adapter out to me...
Does anyone have a pic of the adapter? I want to see if I could make it myself instead of waiting another month for it to arrive from China
Mine arrived in 5 days with DHL should not take that long. Honestly better to use the head unit power than the JBL but I was feeling lazy LOL
Hello,
I bought an android car radio in 2020.
ref. Junsun V1 pro for Peugeot 307 - 2 + 32Go - Intel SC9853
I can't get FM stations (a lot of crackling and almost inaudible radio).
I plug in the antenna plug at the back, try an alternative app (NavRadio + but does not work), the regulation of the parameters of the unit without success.
The model does not really have any FM specific parameters in the factory options.
Thanking you for your help.
JML7 said:
Hello,
I bought an android car radio in 2020.
ref. Junsun V1 pro for Peugeot 307 - 2 + 32Go - Intel SC9853
I can't get FM stations (a lot of crackling and almost inaudible radio).
I plug in the antenna plug at the back, try an alternative app (NavRadio + but does not work), the regulation of the parameters of the unit without success.
The model does not really have any FM specific parameters in the factory options.
Thanking you for your help.
Click to expand...
Click to collapse
I've also that car stereo and the same problem
JML7 said:
Hello,
I bought an android car radio in 2020.
ref. Junsun V1 pro for Peugeot 307 - 2 + 32Go - Intel SC9853
I can't get FM stations (a lot of crackling and almost inaudible radio).
I plug in the antenna plug at the back, try an alternative app (NavRadio + but does not work), the regulation of the parameters of the unit without success.
The model does not really have any FM specific parameters in the factory options.
Thanking you for your help.
Click to expand...
Click to collapse
I've tryed some firmware but same problem.
The radio can hear me only 4 FM station ......from 102mhz to 107mhz.
My radio is Junsun V1 pro for Mazda 2 4+64gb Intel SC9853 with
nxp6851 audio chip.
I'll drive my crazy my antenna is ok, tryed with another stereo is all right.
I've buyed also fm amplifer with no results.
Radio nav+ not resolve the problem.
I have a PX6 MCU STM32 Android 10 that is supposed to be plug and play for the 2007 honda Accord, but I have 2 doors instead of a 4-door. The vent actuator is different between the 4 doors and 2 doors. I followed all the manufacturer's recommendations with the can bus etc. Heat/Cool actuator works fine. It's just the passenger side Blend Vent Door Actuator No luck. Now I'm stuck without an outdoor temperature that messes up the AC and can't change the vents. I plugged the old radio back in temporarily to confirm it's not a car hardware issue. Vent Blend Door Actuator and the outdoor ambient thermostat works with the original radio. Can someone advise me what to do?
There are only 2 Canbus Options
CYT 7 Accord & CYT 7 Accord with AC Gauge both present the same problem
Attached Video demonstrating my issue.
Movie003.mp4
drive.google.com
Unit Purchased
PX6 For Honda Accord 7 2003-2007 Android10 Car Radio Stereo GPS Navi 4+64GB HDMI | eBay
Find many great new & used options and get the best deals for PX6 For Honda Accord 7 2003-2007 Android10 Car Radio Stereo GPS Navi 4+64GB HDMI at the best online prices at eBay! Free shipping for many products!
www.ebay.com