Related
I've tried the "brick fixes" on this forum, but without luck so far... I can get into download mode, and I've tried flashing with odin from this post which says "passed" to me. After this is reboots into a black screen after the "galaxy S" screen, and nothing can be done except making the capasitive buttons light up...
All help is appreciated!!
FYI I don't have a SD card installed during odin...
Solutions in #6 and #7...
Thanks a ton
Novek said:
I've tried the "brick fixes" on this forum, but without luck so far... I can get into download mode, and I've tried flashing with odin from this post which says "passed" to me. After this is reboots into a black screen after the "galaxy S" screen, and nothing can be done except making the capasitive buttons light up...
All help is appreciated!!
FYI I don't have a SD card installed during odin...
Click to expand...
Click to collapse
Sounds like a boot loop, but I can't figure out why you would get one with the stock odin flash. Try doing a factory reset? it shouldn't be needed, but who knows?
how? tried the "hard reset" whitout luck
Novek said:
how? tried the "hard reset" whitout luck
Click to expand...
Click to collapse
In recovery.. there should be a factory reset option. I thought odin did that though.
when it is resetting I can read "mbr checksum error" or similar in yellow text before it's wiping data etc...
Try this ...turn you phone off but keep it plugged into you cpu usb cord and open oidin, next put your phone in download mode and put the needed files in oden and click start I had a hard time getting odin to work right for some reason this may not help but it worked for me. Good luck I don't think you bricked I think you can come out of this.
I assume that you used the partition in ROM Manager? If so I had the same problem as you. The phone would boot up to a black screen with only the buttons working. What I did was flash Eugenes 2.2 Froyo Rom, I surprised that it booted up and worked. After that I flashed back to stock rom and it work as it did before!
AustinKnight45 said:
Try this ...turn you phone off but keep it plugged into you cpu usb cord and open oidin, next put your phone in download mode and put the needed files in oden and click start I had a hard time getting odin to work right for some reason this may not help but it worked for me. Good luck I don't think you bricked I think you can come out of this.
Click to expand...
Click to collapse
Thanks for the help, but my problem occurs after odin... when it's rebooting and it says "passed!" i just end up with a black screen with only the capasitive buttons lighting up when pressed...
ElahC said:
I assume that you used the partition in ROM Manager? If so I had the same problem as you. The phone would boot up to a black screen with only the buttons working. What I did was flash Eugenes 2.2 Froyo Rom, I surprised that it booted up and worked. After that I flashed back to stock rom and it work as it did before!
Click to expand...
Click to collapse
that's my problem!! found it, downloading now... will report back for future accidents...
Froyo worked!! Thanks a ton! Now I just have to downgrade
sry... dubbel
I HAVE THE SAME PROBLEM. How did you get odin to detect your phone? I put it into download mode but no detection plzzz help
farrisizdaman said:
I HAVE THE SAME PROBLEM. How did you get odin to detect your phone? I put it into download mode but no detection plzzz help
Click to expand...
Click to collapse
I turned the phone off while the usb was connected when the phone if off open odin ounce its open boot up the phone and boot it into download mode from there odin will connect and you can put the files you need into it and click start. This worked well for me when I needed to revert back to factory vibrant after flashing the "Real lag FIX" kernel that made my ear piece not work and some of my buttons not work but boy was my phone snappy and my benchmarks were awesome but what good does that do when your girl calls you and you cant hear her and all she can hear is you saying hellllllllooooooo .
I"ve been trying to flash with odin now for about 2 hours. It gets stuck on DO NOT DISCONNECT. And never finishes.
farrisizdaman said:
I"ve been trying to flash with odin now for about 2 hours. It gets stuck on DO NOT DISCONNECT. And never finishes.
Click to expand...
Click to collapse
Ya it was like that for me until I did what I said in my last post, you do have the samsung drivers installed ?
Edit: And you are using this method or this thread HERE
farrisizdaman said:
I"ve been trying to flash with odin now for about 2 hours. It gets stuck on DO NOT DISCONNECT. And never finishes.
Click to expand...
Click to collapse
You have managed to get into download mode right? My device is up and running stock now, but gonna try some other ROM now =)
Glad to hear your phone is back up and running .
i know this is an old thread, but i figure this can help someone later... brick is a common search term, and i figure this will come up in a search and this will save time for others...
here's what happened to me. i was flashing back to stock and was in download mode. the blue bar was moving etc and murphy and his dumb law decided to kill my my usb port... i thought the phone was DEAD! nothing i did woke the phone up. no battery indicator, buttons didn't do anything... it was all black. holding up/down and power didnt turn the phone on and into recovery or download mode... the phone was DEAD...
then after scouring the forum forever, i finally got the phone into download mode...
NOTE: i don't recall if the usb wire was plugged into the computer or not... i think it was though...
NOTE2: samsung drivers should have been installed already...
- remove the battery
- hold vol up and vol down buttons
- reinsert battery
i thought WOO HOO!! I GOT INTO DOWNLOAD MODE!!!
the next issue i had was getting odin to recognize the phone... it didn't detect what com port i had. but after a lot of reading, i finally got it to work...
- open odin first
- then get into download mode using the steps above...
after odin recognized the port the phone was plugged into, i flashed back to stock rom using the instructions given on this site... and my dead phone works again...
i was able to fix a dead phone!! this phone could be un-brickable!!
i hope this helps...
farrisizdaman said:
I HAVE THE SAME PROBLEM. How did you get odin to detect your phone? I put it into download mode but no detection plzzz help
Click to expand...
Click to collapse
Open odin first, then plug in your phone.
HI
So i was trying to restore my LG G2 D803 phone and I accidentally unplugged it when I was doing the LG Tools process, I turned off my phone so I can reset it but now it doesn't work anymore. So now my phone can't use Firmware Update, and every time I tried to escape it, by hold the power button or anything, it goes back to Firmware Update where its now at 0%. What do I do now?
EDIT: I think the problem i'm facing right now. Is that it keeps going into a glitch download mode when I turn my phone on, and I can't access download mode properly or factory reset, due to going back to the glitched download mode. I tried to flash it properly, letting it drain battery on itself, and turning it off FULLY & turning it back on, where all these methods would just lead back to the glitched download mode.
JustinY050 said:
HI
So i was trying to restore my LG G2 D803 phone and I accidentally unplugged it when I was doing the LG Tools process, I turned off my phone so I can reset it but now it doesn't work anymore. So now my phone can't use Firmware Update, and every time I tried to escape it, by hold the power button or anything, it goes back to Firmware Update where its now at 0%. What do I do now?
Click to expand...
Click to collapse
You can try flashing a kdz for your model in download mode with lg 2014 flash tool. See links below, there might be YouTube tutorials, not sure.
https://lg-firmwares.com/lg-d803-firmwares/
https://forum.xda-developers.com/showthread.php?t=2797190
crophs said:
You can try flashing a kdz for your model in download mode with lg 2014 flash tool. See links below, there might be YouTube tutorials, not sure.
https://lg-firmwares.com/lg-d803-firmwares/
https://forum.xda-developers.com/showthread.php?t=2797190
Click to expand...
Click to collapse
Yea I tried using the Flash tool Way but it doesn't work, I think the problem is that the LG is stuck in download mode so I can't do any Flash tool stuff or anything, and I can't restart my phone because it would just go back.
JustinY050 said:
Yea I tried using the Flash tool Way but it doesn't work, I think the problem is that the LG is stuck in download mode so I can't do any Flash tool stuff or anything, and I can't restart my phone because it would just go back.
Click to expand...
Click to collapse
Can you elaborate more when you say it doesn't work?
After you hit flash on the software, don't do anything for like 25mins. It may show you error messages on computer, that it failed or whatever, pop up windows, don't click on anything just let it stay like that. The progress bar can also be stuck on the phone, not a problem. Give it that 25 mins.
crophs said:
Can you elaborate more when you say it doesn't work?
After you hit flash on the software, don't do anything for like 25mins. It may show you error messages on computer, that it failed or whatever, pop up windows, don't click on anything just let it stay like that. The progress bar can also be stuck on the phone, not a problem. Give it that 25 mins.
Click to expand...
Click to collapse
It didn't show any progress on the phone, and also said an error on not working. And there would be no change in the download screen, like it would say that nothing is downloading from the USB port it is in and etc.
But I try to wait for 25 mins and see.
crophs said:
Can you elaborate more when you say it doesn't work?
After you hit flash on the software, don't do anything for like 25mins. It may show you error messages on computer, that it failed or whatever, pop up windows, don't click on anything just let it stay like that. The progress bar can also be stuck on the phone, not a problem. Give it that 25 mins.
Click to expand...
Click to collapse
Nope it didn't work. I did it for at least 30 mins and nothing happened, still the same screen on both on my phone and computer.
Can you post a video ?
crophs said:
Can you post a video ?
Click to expand...
Click to collapse
Of the 25 mins or my problem?
I cant do it for now, but I think the problem is that my phone is in a loop of download mode, i mean that everytime I turn off my phone and turn it back on, it goes back to download mode without me pressing the buttons.
JustinY050 said:
Of the 25 mins or my problem?
I cant do it for now, but I think the problem is that my phone is in a loop of download mode, i mean that everytime I turn off my phone and turn it back on, it goes back to download mode without me pressing the buttons.
Click to expand...
Click to collapse
You must turn it off completely before booting in download mode. Keep pressing and holding volume down+power for a minute, it should completely turn off after one or two LG logo. If it doesn't then you can unplug battery. After that you don't boot with power button, then you boot with download mode method.
Video from complete shutdown - putting USB in computer while pressing volume up button and starting download mode - software recognizing your device - checking all the correct options in software - hitting flash button - state of phone after flash started.
crophs said:
You must turn it off completely before booting in download mode. Keep pressing and holding volume down+power for a minute, it should completely turn off after one or two LG logo. If it doesn't then you can unplug battery. After that you don't boot with power button, then you boot with download mode method.
Video from complete shutdown - putting USB in computer while pressing volume up button and starting download mode - software recognizing your device - checking all the correct options in software - hitting flash button - state of phone after flash started.
Click to expand...
Click to collapse
No, like it automatically goes to download mode wihtout me pressing the buttons, and if i do it the normal button pressing way with the power and volume up, then idk if its the glitch version. But the problem im trying to solve is fixing it so it stops going automatically to the glitched download mode when i turn it on
JustinY050 said:
No, like it automatically goes to download mode wihtout me pressing the buttons, and if i do it the normal button pressing way with the power and volume up, then idk if its the glitch version. But the problem im trying to solve is fixing it so it stops going automatically to the glitched download mode when i turn it on
Click to expand...
Click to collapse
unlpug battery, see youtube how to put it in download properly and flash
crophs said:
unlpug battery, see youtube how to put it in download properly and flash
Click to expand...
Click to collapse
Like take the battery out?
JustinY050 said:
Like take the battery out?
Click to expand...
Click to collapse
Whatever that means to you. Not sure how old you're, but try not to be a thick skull with someone trying help you for free, bye
crophs said:
Whatever that means to you. Not sure how old you're, but try not to be a thick skull with someone trying help you for free, bye
Click to expand...
Click to collapse
K firstly, Im not trying to be rude or anything, I just need help fixing my phone. If I somehow offended you in any reason why, im sorry. And I literally don't know much about phones, but I was trying to make sense on your instructions and making sure Im not going to mess it up. If you dont want to help anymore, its fine, im grateful that you tried to help
Also I know how to flash it properly and put it in download mode properly, its just that its always going to a glitched download mode so I can't download anything, or put it in factory mode.
JustinY050 said:
K firstly, Im not trying to be rude or anything, I just need help fixing my phone. If I somehow offended you in any reason why, im sorry. And I literally don't know much about phones, but I was trying to make sense on your instructions and making sure Im not going to mess it up. If you dont want to help anymore, its fine, im grateful that you tried to help
Also I know how to flash it properly and put it in download mode properly, its just that its always going to a glitched download mode so I can't download anything, or put it in factory mode.
Click to expand...
Click to collapse
No you shouldn't, rather I am sorry, made a bad judgement call. I left room for confusion in my post. Should've said unplug and plug back the battery. Perhaps you thought if i meant to leave it unplugged.
As your main problem was to stop it from bootlooping into a glitched download, it can be done with holding power and volume down for a minute or two.
But since that didn't work for you i suspected button/hardware failure and so recommended to reconnect the battery.
Another way can be, to let it be as is, so that the battery drains itself and after that charging it with a wall adapter. And see if it stops booting into download itself, or displays a charging only screen.
Anyhow, I hope you find a way out. Feel free to ask anything again.
crophs said:
No you shouldn't, rather I am sorry, made a bad judgement call. I left room for confusion in my post. Should've said unplug and plug back the battery. Perhaps you thought if i meant to leave it unplugged.
As your main problem was to stop it from bootlooping into a glitched download, it can be done with holding power and volume down for a minute or two.
But since that didn't work for you i suspected button/hardware failure and so recommended to reconnect the battery.
Another way can be, to let it be as is, so that the battery drains itself and after that charging it with a wall adapter. And see if it stops booting into download itself, or displays a charging only screen.
Anyhow, I hope you find a way out. Feel free to ask anything again.
Click to expand...
Click to collapse
Nah its ok, that happens to me too sometimes.
So I was going to try to unplug my battery and reconnect it but then but before I was, i was testing some other stuff with the button commands stuff (I mean like the download mode with pressing power and volume up adn stuff) and I think i was able to get the actualy download mode, not the glitched one. I was able to download a bit for the flash tool so what i'm testing rn is to see if I can do the full factory reset and see if that fixes it.
PS: I was already doing the flashtool before so its fine if I erase my data
JustinY050 said:
Nah its ok, that happens to me too sometimes.
So I was going to try to unplug my battery and reconnect it but then but before I was, i was testing some other stuff with the button commands stuff (I mean like the download mode with pressing power and volume up adn stuff) and I think i was able to get the actualy download mode, not the glitched one. I was able to download a bit for the flash tool so what i'm testing rn is to see if I can do the full factory reset and see if that fixes it.
PS: I was already doing the flashtool before so its fine if I erase my data
Click to expand...
Click to collapse
K it looks like it worked but now it crashes when it loads the LG logo
JustinY050 said:
K it looks like it worked but now it crashes when it loads the LG logo
Click to expand...
Click to collapse
Sounds like a bootloop, i once fixed it by using another usb port and usb cable. Sometimes they get disconnected for bad connection and cause this kinda error. If MD5 is available, please match yours with original after downloading files. You can keep flashing, maybe try a different kdz later. There is also a TOT method which i never tried myself. This phone is almost impossible to brick permanently.
Some good threads -
https://forum.xda-developers.com/showthread.php?t=2475045
https://forum.xda-developers.com/showthread.php?t=2687768
This is the easiest
https://m.youtube.com/watch?v=cOxlaIPW2ew
https://www.google.com/amp/s/amp.re...he_lg_g2_is_unbrickable_a_story_of_death_and/
crophs said:
Sounds like a bootloop, i once fixed it by using another usb port and usb cable. Sometimes they get disconnected for bad connection and cause this kinda error. If MD5 is available, please match yours with original after downloading files. You can keep flashing, maybe try a different kdz later. There is also a TOT method which i never tried myself. This phone is almost impossible to brick permanently.
Some good threads -
https://forum.xda-developers.com/showthread.php?t=2475045
https://forum.xda-developers.com/showthread.php?t=2687768
This is the easiest
https://m.youtube.com/watch?v=cOxlaIPW2ew
https://www.google.com/amp/s/amp.re...he_lg_g2_is_unbrickable_a_story_of_death_and/
Click to expand...
Click to collapse
Sorry for the late reply, just been busy flashing my phone. So I been trying to re flashing my phone using the TOT method because the kda method isn't working, but either 1) it keeps crashing when its downloading 2) cannot recognize the phone to my computer when my phone is in download mode but says its not connected to my computer. Before, it did kinda work, it kept crashing but it lasted a bit longer sometimes, but I had to reflash it because the software update was glitched where it says its on the notification bar but wasnt there. So for rn, i'm still trying to reflash it.
I donno much about the TOT method, haven't tried myself. Getting a hunch that there might be hardware issues somewhere which is interrupting the process and not letting it finish, could be the cable, pc usb outlet, phone's micro usb port....perhaps a loose connection or something else.
If i were you i would stick to the kdz, as it's working somewhat better for you and they all serve same purpose in the end. That youtube video is actually a good step by step tutorial.
Hi. Browsed for ages and always come here for answers.
Here's my problem.
2x S8s. SM-950f.
Updated to most recent software through software update. Both phones were glitchy and crashing and just generally irritating after.
Factory data reset etc. This did not resolve the problems, also led to one of them having issues with FRP (annoying)
Used Odin to try and flash the latest firmware (from sammobile, UK BTU) after flashing both, they reset and powered on. Got stuck at the S8 screen.
Restarted then both were at the "an error occurred during update" screen.
Managed to get back to download screen. Re checked the software and model numbers, even that the bootloader was the correct version etc. All was fine.
Connected to Odin, shows that it is connected, but nothing happens when clicking start.
Now after attempting that, both phones will not power on.
(One will when placed on the wireless charger, but just sticks at S8 screen) and download mode or reset screen can not be accessed. So, not exactly happy. And totally out of ideas
Any suggestions, beyond taking it to a shop to see if anyone can help.
yes .....dont tuch the phones for 24 hours let the battery die ...it will...connect to pc and then try download mode....u may need to press combination for like 1 minute to get to download mode....flash twrp reboot directly into it when odin says successfully .....wipe system data ....dont turn on phone download any custom rom flash and enjoy.....it will trip knox but worth than getting a new board....
Okay, will give that a try.
TWRP?
TWRP install
https://dl.twrp.me/dreamlte/twrp-3.2.3-0-dreamlte.img.tar.html: Download link for twrp SM-G950F (dreamlte)
Just said, wait until your device powers off due battery insufficience. Plug cable and hold at the same moment vol(down)+bixby+power. Then press vol(up) at the warning screen to proceed to odin mode. Let it charging a while like 1 h. Then unplug it and plug it to your pc. In Odin select ap the previous downloaded file. Take your mobile in your hand. With one hand, prepare your fingers to vol(up)+bixby and with the other hand start the flashibg process. Be careful, and take your hand directly from the mouse if you clicked start in odin, and position your one finger to power button, but dont click. If odin start pass, press immidiately the buttons (vol(up)+bixby+power) and let it to start into recovery. If you arrived to recovery, reply to us if not search for help!!!
Good luck
memreb
Still trying to get them on. Powered on to download mode but only for a couple of seconds and switched off again.
Can't get them to power on. Buggered
simonboyle said:
Still trying to get them on. Powered on to download mode but only for a couple of seconds and switched off again.
Click to expand...
Click to collapse
i have the same issue with my s8 but when i boot in download mode the screen goes black but if i press volupe up it connect to odin with black screen you shoud give it a try
Will try that
Okay, downloaded TWRP, can get phone calls nected to Odin but when I extract TWRP it doesn't give a valid file type.
Am I being dumb.
No files appear that Odin will recognise.
Also just shows as "recovery" no .tar or anything
Ignore above. Corrupted download.
Sorted.
Now when flashing TWRP is gets to a fail due to
"Complete (write) fail
Hi you should try flashing official firmware
itac47 said:
Hi you should try flashing official firmware
Click to expand...
Click to collapse
The point of the thread us that I am.unable to do that.
So kinda useless post buddy.
Read the OP.
Anyone want two bootlooped S8s? Hahahaha
simonboyle said:
Anyone want two bootlooped S8s? Hahahaha
Click to expand...
Click to collapse
Not sure what stage your at and maybe some more useless ideas
1. Trying to flash twrp is kinda of useless if you can't get into your system need oem unlock for that.
2. Have you tried taking out Sim card and SD card and reboot.
3. If you can at least boot try smart switch as it has a emergency recovery option.
4. Trying rebooting in safe mode.
All been attempted
I was going along ok until I made the fatal error of transferring the Magisk patched file to PC via MTP instead of taking the time to re-learn adb, which must have corrupted it. Thus predictably Odin hung and I am in trouble.
Where I am stuck is being unable to turn the phone off to come back in download mode to start over with stock firmware. I have been unable to find any secret button presses, and the battery doesn't seem to want to die leaving me with an $800 paperweight.
I did search around for this first and didn't find any real answers. Has anyone found an effective solution to this problem? Thanks.
fastzombies said:
I was going along ok until I made the fatal error of transferring the Magisk patched file to PC via MTP instead of taking the time to re-learn adb, which must have corrupted it. Thus predictably Odin hung and I am in trouble.
Where I am stuck is being unable to turn the phone off to come back in download mode to start over with stock firmware. I have been unable to find any secret button presses, and the battery doesn't seem to want to die leaving me with an $800 paperweight.
I did search around for this first and didn't find any real answers. Has anyone found an effective solution to this problem? Thanks.
Click to expand...
Click to collapse
If Odin recognizes you device, you can flash firmware in emergency recovery.
Cindysmith0994 said:
If Odin recognizes you device, you can flash firmware in emergency recovery.
Click to expand...
Click to collapse
Thank you, but the PC won't recognize the device. What does happen is the emergency recorevy screen tries to come up. I tried starting in download mode with bixby+vol down then USB. I did get the battery low enough where I don't get the teal screen of death anymore, perhaps it is too low for USB to work? What I was hoping for was the charging animation but no luck. Surely this is just a software problem and there is a way out.
fastzombies said:
Thank you, but the PC won't recognize the device. What does happen is the emergency recorevy screen tries to come up. I tried starting in download mode with bixby+vol down then USB. I did get the battery low enough where I don't get the teal screen of death anymore, perhaps it is too low for USB to work? What I was hoping for was the charging animation but no luck. Surely this is just a software problem and there is a way out.
Click to expand...
Click to collapse
Did you try getting into recovery and perform a data factory reset and then see what happens?
Just load the stock firmware BL, Ap, cp and home csc into Odin if you see emergency teal screen. The emergency screen will start loading
Black screen ....Perhaps your battery is dead?
Thank you all for the replies. I had let the battery get low in a misguided attempt (based on advice elsewhere) to get it to shut off. I had to let it charge a while for it to wake up enough for PC to see it. Then I was able to flash in Emergency Recovery mode.
Thank you for the help.
fastzombies said:
Thank you all for the replies. I had let the battery get low in a misguided attempt (based on advice elsewhere) to get it to shut off. I had to let it charge a while for it to wake up enough for PC to see it. Then I was able to flash in Emergency Recovery mode.
Thank you for the help.
Click to expand...
Click to collapse
Glad you got your device up and running ?
Maybe someone can help me. I seemed to have borked my phone. I kept getting "Google is Stopping" with no way to fix it, so I tried reflashing my firmware in odin. After I loaded all the files and hit start, I realized I didn't untick auto reboot, so I tried aborting the installation and ended up with screen (I've had it before and got out of it by still flashing in Odin, but now, if I try to reflash firmware while in this screen, it's stuck on SYSTEM in odin.
Any help appreciated!
Try this
That is where I got stuck. Are you trying to flash stock or patched firmware? I had to start over with stock as I copied the patched via MTP instead of adb and it got corrupted.
I think what I did was unplug and reset Odin. Wait for screen to turn off, then make sure it is at least 80% charged. Then Bixby + Vol Down + plug in and you will go back to this screen. Then I was able to flash stock. I had to go so far as to re-lock bootloader and flash stock again since my "OEM Unlocking" was not just greyed out but missing. Since then I've had no time to try again, but at least I have a working phone.
This is my anecdotal procedure, can't say if it is the right or best one.
Hi All,
I was trying to flash the latest firmware for my device (G9750ZCU2ASG4) and during the odin process, my computer restarted which failed the update halfway through. I rebooted the computer, tried again, and it was trying to establish a connection for a really long time, so I disconnected my phone from the USB port on my computer, and held Power and Volume Down to try and force reboot the phone. I was going to try and go back into download mode to restart the process. My phone mentioned something about needing to do an emergency recovery, but I continued to hold down the power and volume down keys and then everything went black on the phone.
I've tried multiple USB cords, all of the button commands known for the device, and have even tried to perform the emergency mode recovery on my device, but it seems like it's in some sort of locked state; What I mean is the phone is stuck on a black screen. I can't "boot" into recovery or into download mode. The phone doesn't even vibrate when I hold the power button or power and down to try and force reboot it. Odin doesn't recognize the phone when I plug it into the computer nor does the device manager on my windows computer.
Does anyone have any experience with this sort of issue or any idea of what else I can do to try and get into download mode to flash my firmware again? All help, suggestions, or comments regarding this are much appreciated.
Sounds like the battery is dead
Hi Dude, I am struggling with the same problem, read this post and it came to me, had to come back and give you the solution.
Press bixby+volume down, IMMEDIATELY after the screen goes off, hold volume up and down while connecting the USB cable super fast.
You have got like 10ms to do it
Otherwise it just goes back to the AVB FAIL screen
Ran into this issue, none of the above worked for me.
This is how I resolved:
1) Placed phone on wireless charging mat and let it boot to emergency recovery screen
2) Load TWRP into AP slot of Odin and leave the window open on your computer ready to flash
3) Connect phone to computer whilst it's on the mat and press start in Odin as soon as your device appears
It may fail a few times but if your quick you can install TWRP.
4) Now boot into recovery and let your phone charge to a reasonable level (above 20%)
5) Boot into Download mode and flash your desired rim via Odin
Ok so before I started writing this I had only one problem now I'm worried my problem has gone from bad to worse.
I updated my 6T to 10.3.2 from the latest Beta after the process it prompted for a restart, upon restarting it got stuck in the boot animation. I tried going into Recovery and Download mode unsuccessfully so I went through the forums a bit and saw that someone who had the same problem successfully entered Recovery mode by pressing VOLUME UP+DOWN+POWER buttons simultaneously, I tried to do the same and my phone turned off and now it doesn't turn on! :crying:
Has anyone experienced this or know how to fix this? Any help will be much appreciated. Tia!
theDUD3 said:
Recovery mode by pressing VOLUME UP+DOWN+POWER buttons simultaneously, I tried to do the same and my phone turned off and now it doesn't turn on!
Click to expand...
Click to collapse
These should be clarified:
Volume Up + Power while turning on will boot to fastboot.
Volume Down + Power while turn on will boot to recovery.
Holding Volume Up + Power should force the phone to turn off.
Volume Up + Volume Down should put your phone in Download mode for the MSM Tool.
Turn the phone off, let it sit. Then try turn it back on. Any response?
try to shutdown phone ...hold vol+ and power button for like 15 sec and restart your phone if this didnt work then u can try MSM tool
Thanks guys, got it working using MSM Tool!
regarding oneplus 6 got stuck on logo screen and recovery mode not working
was just going through some random stuff on my phone and suddenly my device automatically restarted and not it is stuck on logo screen. i and when i tried to open recovery mode, nope its is just not working either. i even tried the fastboot menu to open recovery settings but still no progress help me here...its urgent going though lockdown in country so no service either cant communicate with the fam also. HELP...!!!!
frankynehemimah said:
was just going through some random stuff on my phone and suddenly my device automatically restarted and not it is stuck on logo screen. i and when i tried to open recovery mode, nope its is just not working either. i even tried the fastboot menu to open recovery settings but still no progress help me here...its urgent going though lockdown in country so no service either cant communicate with the fam also. HELP...!!!!
Click to expand...
Click to collapse
You are likely going to lose your data. Know that going in if its not already backed up.
If you have the fastboot menu you can use the fastboot roms.
Or my least favorite option or what I would try last, MSM Tool (Tmobile 6Ts use a different tool).
IMPORTANT if you want to try and recover and data off your phone first, go to fastboot, and try and "boot" the TWRP img (not the installed one, one from your PC using the fastboot command). If that works you might be able to recover data. If that does worm, try dirty flashing the last ROM you were running and see if it boots.
No worries!
frankynehemimah said:
was just going through some random stuff on my phone and suddenly my device automatically restarted and not it is stuck on logo screen. i and when i tried to open recovery mode, nope its is just not working either. i even tried the fastboot menu to open recovery settings but still no progress help me here...its urgent going though lockdown in country so no service either cant communicate with the fam also. HELP...!!!!
Click to expand...
Click to collapse
Hello, I am sorry to hear of you having this issue, I just went through 3 1/2 days (off and on) of recovering my T-Mobile OnePlus 6t which I found a way to get my unlock code within 2 weeks of having it, so I rooted it and put a custom kernel on it, stuck on 9.0 never let me update as I was not familiar with A/B partitioning, yet! The answers I saw to your questions were spot on, I just had a little to add to it and I'm sure I am not alone. Real quick let me list what has gone wrong on the rare occasion it hit the fan with the 6t...
- When I would accidentally and rarely let my battery die it seemed like it took forever to get it to reboot, I mean it sat on my desk of DOA devices for 2 weeks!
- It often seems like the buttons do not always respond properly and never have when I needed them to. Been through this before, I've bricked and unbricked and flashed and re-flashed and wiped all weekend and I like Android 10 and all but seems everything is different for every build, and everything seems to have to go in the right order with the exact right file or you wind up in a jam, period..
- That said, the previous person that answered your question has likely encountered similar, I've heard of right down to the buttons not physically working, but I have been a Smart Device Master III Technician for over 5 years, i know my buttons were not broken.
- Most likely culprit that I just handled and worked, i did have to use the MSM tool, several times - and re-unlock the BL, several times I would not even get the chance to get to fastboot, just a screen saying Build and Hardware not a match"" in yellow letters and it just bootlooped. No fastboot is no good, but when you said the tool would show some signs of working but then not, I have 2 solutions that I needed on diffrent occcasions.
1 - As mentioned fully try other USB cables, and ports, if you pull the usb-c out of the port and hold <power + vol up + vol down> eventually it will do something, very picky, sometimes gotta move your fingers to different spots on the buttons and also after 15-20sec let go of power and hit and hold it again... after a few seconds before it vibrates stick the cable in connected to your PC and the screen will be black (obv) but the msm tool will pick up on it. I know about the cables because I take good care of my phones and cables and charging ports, however on my final fix today it showed in msm tool it was connected but waiting for device.... Fed up i put the phone down and moved the usb cable a little bit and it picked up on it and did its thing! That part was just the cable, getting into qualcomm mode or w.e. is a bit tricky sometimes.
- Also someone said set it down for a while and come back to it.. THAT WORKS!! Let it fully charge and often just plugging in charger turns it on, bootloop soft brick or however have you, very simiilar to an Apple device and their DFU (don't f up mode cause screen is black..)
I hope that helps you get in touch with your family and friends.. Whatever you do, don't give up bc if you have not got it yet, you will! One other note, there are a few different msm tools available and they look the same some same size, but the one that supposed to work on my phone didn't and one that they say only a fool would attempt to try actually saved me, so if all else fails, use a different msm tool/usb cable and you will get it! I don't think I can post links yet I am on here very rarely, but plan on more! I have received so much help from XDA throughout the years on thousands of phones with just software issues alone, aas well as guides to my own phones. I would be honored to give back as I also have some extensive knowledge on many devices but I am a noob in comparison to many! Stay safe, good luck and please update and let us/ me know how it worked out for you. If i can help further I will, I have every firmware file for the OP6t, recovery, tools, software, this is not new to me but I feel your frustration!