Related
I followed the instructions on (youtube DOT com SLASH watch?v=SpHZ2n9lTcs) this YouTube video to install CyanogenMod on my AT&T Galaxy S4. I flashed the CWM using Recovery Tools, then when it rebooted it wouldn't boot into recover (it would say "System software not authrized by AT&T") so I downloaded Odin and tried flashing it from there but I get the following messages:
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
On the phone screen is the Download mode page with the message at the top
start[224,1440]
secure magiccode check fail : recovery
Could someone please help me complete the installation or at least revert back to stock? I can't use my phone at all now
leaf68 said:
I followed the instructions on (youtube DOT com SLASH watch?v=SpHZ2n9lTcs) this YouTube video to install CyanogenMod on my AT&T Galaxy S4. I flashed the CWM using Recovery Tools, then when it rebooted it wouldn't boot into recover (it would say "System software not authrized by AT&T") so I downloaded Odin and tried flashing it from there but I get the following messages:
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
On the phone screen is the Download mode page with the message at the top
start[224,1440]
secure magiccode check fail : recovery
Could someone please help me complete the installation or at least revert back to stock? I can't use my phone at all now
Click to expand...
Click to collapse
@leaf68 I'm guessing that u are on either MF3 or MK2,since u bricked trying to flash CWM recovery.Try flashing these via ODIN MF3.tar or u can follow my latest MK2.tar.Check post#2 for guide on how to.....GOODLUCK......:good::good:
ted77usa said:
@leaf68 I'm guessing that u are on either MF3 or MK2,since u bricked trying to flash CWM recovery.Try flashing these via ODIN MF3.tar or u can follow my latest MK2.tar.Check post#2 for guide on how to.....GOODLUCK......:good::good:
Click to expand...
Click to collapse
Thank you very much for your response. Right before you posted this, I plugged my phone into my laptop and despite doing this multiple dozen times, it actually booted out of nowhere. Thanks again and I'll hold on to the files in case I need them in the future
yes!
Finally got personal!
It was my USB cable that changed with the Moto X and now worked (S4 Cable sucks anyway!)
Who have some problem there are several possibilities! Do the following.
Test all kinds of Odin, but before connecting first add the file;
If you get caught try to install a recovery may be the "philz_touch_6.44.8-jflte.tar.md5" or "openrecovery-TWRP-2.7.1.0-jfltexx.tar";
If you do not give change the USB port of your PC;
If it persists, replace the USB cable;
That's what I did and it worked guys because of USB CABLE! kkkkkk
have the same problem bro is your phone ok now what did you do?
diogomitsuda said:
Finally got personal!
It was my USB cable that changed with the Moto X and now worked (S4 Cable sucks anyway!)
Who have some problem there are several possibilities! Do the following.
Test all kinds of Odin, but before connecting first add the file;
If you get caught try to install a recovery may be the "philz_touch_6.44.8-jflte.tar.md5" or "openrecovery-TWRP-2.7.1.0-jfltexx.tar";
If you do not give change the USB port of your PC;
If it persists, replace the USB cable;
That's what I did and it worked guys because of USB CABLE! kkkkkk
Click to expand...
Click to collapse
I can vouch. It's the cable and the port. Try switching ports between failed flashes. I guarantee you it will eventually work. It's really sensitive.
Hello every one, i am here to ask help for a special case, if is there someone with the knowlege in XDA to help mein this, i got a friend who has his s7 edge from at&t one day not working anymore it got stuck in boot loop, he never try to root or nothing he is a normal simple phone user. so now i am trying to help him but i dont know which firmware the phone had, i cant put developer options , the usb debugging nothing etc, i try to start in recovery mode but it get stuck in blue letters that say recover booting and never boot into recovery, the only thing the phone do now is get into download mode, and the pc recognize it and odin too, i have read every single thread i think to flash every single stock rom available and none has work i try diferent pc´s, cables, usb port, odin version etc. the most common error i got all times by odin was this one
ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
i am noob in this things i barely know a little readding all the threads i have put so much effort on this without success ,
can someone guide me please i will apreciate it
Darkboss10 said:
Hello every one, i am here to ask help for a special case, if is there someone with the knowlege in XDA to help mein this, i got a friend who has his s7 edge from at&t one day not working anymore it got stuck in boot loop, he never try to root or nothing he is a normal simple phone user. so now i am trying to help him but i dont know which firmware the phone had, i cant put developer options , the usb debugging nothing etc, i try to start in recovery mode but it get stuck in blue letters that say recover booting and never boot into recovery, the only thing the phone do now is get into download mode, and the pc recognize it and odin too, i have read every single thread i think to flash every single stock rom available and none has work i try diferent pc´s, cables, usb port, odin version etc. the most common error i got all times by odin was this one
ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
i am noob in this things i barely know a little readding all the threads i have put so much effort on this without success ,
can someone guide me please i will apreciate it
Click to expand...
Click to collapse
Remove PIT file and try again.
From Edge of Galaxy Seven
Darkboss10 said:
Hello every one, i am here to ask help for a special case, if is there someone with the knowlege in XDA to help mein this, i got a friend who has his s7 edge from at&t one day not working anymore it got stuck in boot loop, he never try to root or nothing he is a normal simple phone user. so now i am trying to help him but i dont know which firmware the phone had, i cant put developer options , the usb debugging nothing etc, i try to start in recovery mode but it get stuck in blue letters that say recover booting and never boot into recovery, the only thing the phone do now is get into download mode, and the pc recognize it and odin too, i have read every single thread i think to flash every single stock rom available and none has work i try diferent pc´s, cables, usb port, odin version etc. the most common error i got all times by odin was this one
ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
i am noob in this things i barely know a little readding all the threads i have put so much effort on this without success ,
can someone guide me please i will apreciate it
Click to expand...
Click to collapse
Not knowing WHAT you are flashing, makes it a little harder to determine what is going wrong.
Go HERE and flash this in Download Mode. This is the latest Stock 935A ROM, This will wipe Everything on the device, and it'll be like it came brand new
norbarb said:
Remove PIT file and try again.
From Edge of Galaxy Seven
Click to expand...
Click to collapse
which is the pit file, sorry for dumb question
Darkboss10 said:
which is the pit file, sorry for dumb question
Click to expand...
Click to collapse
If I remember correctly you need to uncheck PIT in odin and this should help. BTW. What are you trying to flash?
From Edge of Galaxy Seven
I have try the stock rom version 935a...pf2 . And any other stock rom i have found for the 935a seeing which will work .
Darkboss10 said:
I have try the stock rom version 935a...pf2 . And any other stock rom i have found for the 935a seeing which will work .
Click to expand...
Click to collapse
If you are currently on a ROM that has v4 boot loader's, part of your problem may be that you are trying to flash a rom with v2, v3 bootloaders
Sent from my SM-G935T using XDA-Developers Legacy app
so i do better go with the v4 bootloader and i will check if the pit file is uncheck, what should i put on the re-partition case of odin active or inactive?
by the way thanks for your help
kangi26 said:
If you are currently on a ROM that has v4 boot loader's, part of your problem may be that you are trying to flash a rom with v2, v3 bootloaders
Sent from my SM-G935T using XDA-Developers Legacy app
Click to expand...
Click to collapse
hey i did exactly as you told me , and for first time i guess i have an advance, i still get an error but at least a new error , check it out maybe you know what it is
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> emmc_appsboot.mbn
<ID:0/005> lksecapp.mbn
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1
any idea what can be?
i try to flash the G935a...PI2 rom bot without the CSC which i guess is the pit file right?
When you try to get the device into Recovery, it will appear like it isn't doing it or looks like an "No Command" error and it can take a couple of min to actually get into Recovery.
I would boot into Recovery again, let it sit for a few min. My bet is that it will eventually get into Recovery. Once it does, do a Factory reset, and then reboot into Download Mode, open Odin connect the device to your PC and install all 4 of the items from the Stock ROM thread, don't mess with any of the settings in Odin, just populate the slots with the BL, AP, CP and CSC
kangi26 said:
When you try to get the device into Recovery, it will appear like it isn't doing it or looks like an "No Command" error and it can take a couple of min to actually get into Recovery.
I would boot into Recovery again, let it sit for a few min. My bet is that it will eventually get into Recovery. Once it does, do a Factory reset, and then reboot into Download Mode, open Odin connect the device to your PC and install all 4 of the items from the Stock ROM thread, don't mess with any of the settings in Odin, just populate the slots with the BL, AP, CP and CSC
Click to expand...
Click to collapse
This is what i get . But it doesnt enter recovery at the end. It just shut off ....
Darkboss10 said:
This is what i get . But it doesnt enter recovery at the end. It just shut off ....
Click to expand...
Click to collapse
Looks like the device is just rebooting
Sent from my SM-G935T using XDA-Developers Legacy app
kangi26 said:
Looks like the device is just rebooting
Sent from my SM-G935T using XDA-Developers Legacy app
Click to expand...
Click to collapse
if you watch the top corner blue letters it says recovery booting....
Darkboss10 said:
if you watch the top corner blue letters it says recovery booting....
Click to expand...
Click to collapse
I'm at a loss man, I'm sorry. I haven't seen that before, I dont get the "Samsung" part when I enter Recovery
Darkboss10 said:
if you watch the top corner blue letters it says recovery booting....
Click to expand...
Click to collapse
Can you post screen from download mode?
From Edge of Galaxy Seven
norbarb said:
Can you post screen from download mode?
From Edge of Galaxy Seven
Click to expand...
Click to collapse
There you go . By the way i should mention the phone only turns on download mode when plugged.
Darkboss10 said:
There you go . By the way i should mention the phone only turns on download mode when plugged.
Click to expand...
Click to collapse
OK you got bootloader v2. Try to flash some older version of MM in download mode using odin
Like from here: http://forum.xda-developers.com/showthread.php?p=67601581
From Edge of Galaxy Seven
You need to start by using the latest Odin, 3.12.3 for installing the original ROM. If you try to unlock, you need to go get the PrinceComsy version. PrinceComsy won't work for in-bricking a device, and if you have any of the stock versions of the ROM, you need the 3.12.3 version.
norbarb said:
OK you got bootloader v2. Try to flash some older version of MM in download mode using odin
Like from here: http://forum.xda-developers.com/showthread.php?p=67601581
From Edge of Galaxy Seven
Click to expand...
Click to collapse
I try that . Now i got this error but only on the phone screen and odin is stuck at initialization .. any idea what could be
i download the venom stock rom and the odin file he suggest but that odin is v 3.11.2 , so that was the one that trows me the odin protocol error, i try the same rom but with the v 3.12.3 odin , and it start working but it says fail at the on the recovery image, do that has to do something with my problem that the phone can boot into recovery mode?
here are the logs
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> FAIL! (Erase)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1
Evening fellas!
I hope i can get some help over because i am freaking out!
Let me start with what i wanted to achieve. I wanted to go and use Stuff on my phone which wasnt usable due to the SafetyNet API, because i got a custom firmware and root Access. I tried to flash Magisk but it doesnt worked, neither did my SuperSU proberly.
My idea was to unroot and then simply flash the stock firmware via Odin on my phone. 1st couple of tries it didnt work. However, it also didnt affect my phone at all. So i then went into my recovery (TWRP) and did factory reset. Just to clean things up. I tried again to flash and yeah, he actually did it! Just with the minor exception that the flasing failed like 3% before its completion and now i got basiclly a white brick. I ve tried numerous times to flash that firmware again, get some other firmware running - I also tried to flash the Stock Rom completly (which also was able to start the flashing just before it failed in the middle).
I dont find any help on the internet, or at least not help that helps me in my specific situation. I honestly dont know what to do else... I do appreciate any help!
Please help me xda-users, you re my last hope!
Did you try using the original USB cable? Tried different USB ports?
audit13 said:
Did you try using the original USB cable? Tried different USB ports?
Click to expand...
Click to collapse
Yes, i just did. I ve used several USB Ports of my Computer (Haven't tried another computer yet, but that will come too). I also used two different cables. One Original and one third-party cable from amazon, which worked just fine for normal file copying and moving, on the S4 before its brick and the Samsung Grand Prime as well (as i use that in the mean time).
As from yesterday at some random points i was still able to get to flash something for just a second or so, the only messages i get from odin today are these:
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> FAIL! (DeviceInfo)
<OSM> All threads completed. (succeed 0 / failed 1)
I dont find any helpful information on that error message either, which is the worst part of it all.
Is Odin assigning a COM port to the phone?
audit13 said:
Is Odin assigning a COM port to the phone?
Click to expand...
Click to collapse
Yes, everything is detected. Odin is detecting the Samsung Grand Prime just as well as the Galaxy S4. I've also tried different version of Odin. v3.12.3 and v3.13.1. They both give me the same output.
During the initalization phase, Odin is trying to communicate with the phone and is not able to do so.
What about Odin 3.07 with Win7?
Thread moved to Help & Troubleshooting.
audit13 said:
During the initalization phase, Odin is trying to communicate with the phone and is not able to do so.
What about Odin 3.07 with Win7?
Click to expand...
Click to collapse
I ve been using Windows 7 all the time, but now i also tried it with Odin v3.07 and look there: It actually worked! I was able to flash the Stock Firmware, i downloaded days ago, on the phone.
But i still have some problems. As i had the stock firmware running everything seemed to work just fine. At first some google processes repeatedly stopped all the time, but i got that fixed after a factory reset. But i wasnt able to get any google Service running even though i was logged in successfully. It seemed like it was working, but i got fooled. So i tried to flash the whole stock rom and thats where the fun begins all over again.
With using Odin v3.07 i set the files for the Bootlader(BL), PDA(AP),Phone(CP) and CSC but it wont work. Here's the Odin log:
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
vM44tze said:
I ve been using Windows 7 all the time, but now i also tried it with Odin v3.07 and look there: It actually worked! I was able to flash the Stock Firmware, i downloaded days ago, on the phone.
But i still have some problems. As i had the stock firmware running everything seemed to work just fine. At first some google processes repeatedly stopped all the time, but i got that fixed after a factory reset. But i wasnt able to get any google Service running even though i was logged in successfully. It seemed like it was working, but i got fooled. So i tried to flash the whole stock rom and thats where the fun begins all over again.
With using Odin v3.07 i set the files for the Bootlader(BL), PDA(AP),Phone(CP) and CSC but it wont work. Here's the Odin log:
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Okay, i don't know whats wrong now - but now i cant even flash back the stock firmware that worked before with odin v3.07. Odin now says:
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
EDIT: Its not even being detected anymore.
There is no need to split the tar.md5 into 4 parts. In Odin 3.07, you can flash it as a single file in PDA.
You're flashing the latest stock ROM? Is it possible the USB port on the phone is damaged?
Hi everyone!
I hope I'm asking this in the right place. I think I may have really messed up my tablet. My apologies, this is going to be a long one.
After following some very bad advice I was using my SM-T580 8.1 (rooted with TWRP, Magisk and Manager) to explore Xposed. I now know Xposed + Samsung = bootloops. While trying to restore my poor little tablet I messed something up big time. When I tried to boot into recovery....it didn't work. So I booted into download mode and tried to flash stock firmware downloaded from Sammobile. While flashing with Odin 3.13.1, the connection was broken, my dog decided that it as the perfect moment for playtime. Now I can only boot into Odin mode and nothing else. To let it boot normally I get a bootloop with the Samsung Logo and the red warning "Could not boot into normal mode. Invalid Kernal length." Every time I try to flash the firmware I get "re-partition failed" error. I've tried two different PCs, 7 different USB cords, every USB port I have and stock firmware from 6.0 to 8.1. I've tried with and without the PIT file and tried checking/unchecking the repartition box in Odin's options. If I leave the repartition box empty is hangs on "setting up connection" and never moves past that. In the past week, I'm not sure how, I did get to the recovery menu. I cleared the cache and did a factory reset. It still went into the loop, so I tried recovery mode again and was able to look at the logs. I don't know why I looked because I really dont have any idea what they say. The only thing I did understand was that one of them said there was no recovery file. I assume this is a VERY bad thing. Since then I cant get back to it. Oh, depending on which USB port I plug into... sometimes the FRP is ON, with another port it is OFF. Don't know if that would help with a diagnosis. Sorry again for the long post, but I've tried to include as much information as possible. At this point is there any hope of fixing it?
Thank you in advance and a huge thanks for being my "go-to" since my SM-T530nu.
kstehling said:
Hi everyone!
I hope I'm asking this in the right place. I think I may have really messed up my tablet. My apologies, this is going to be a long one.
After following some very bad advice I was using my SM-T580 8.1 (rooted with TWRP, Magisk and Manager) to explore Xposed. I now know Xposed + Samsung = bootloops. While trying to restore my poor little tablet I messed something up big time. When I tried to boot into recovery....it didn't work. So I booted into download mode and tried to flash stock firmware downloaded from Sammobile. While flashing with Odin 3.13.1, the connection was broken, my dog decided that it as the perfect moment for playtime. Now I can only boot into Odin mode and nothing else. To let it boot normally I get a bootloop with the Samsung Logo and the red warning "Could not boot into normal mode. Invalid Kernal length." Every time I try to flash the firmware I get "re-partition failed" error. I've tried two different PCs, 7 different USB cords, every USB port I have and stock firmware from 6.0 to 8.1. I've tried with and without the PIT file and tried checking/unchecking the repartition box in Odin's options. If I leave the repartition box empty is hangs on "setting up connection" and never moves past that. In the past week, I'm not sure how, I did get to the recovery menu. I cleared the cache and did a factory reset. It still went into the loop, so I tried recovery mode again and was able to look at the logs. I don't know why I looked because I really dont have any idea what they say. The only thing I did understand was that one of them said there was no recovery file. I assume this is a VERY bad thing. Since then I cant get back to it. Oh, depending on which USB port I plug into... sometimes the FRP is ON, with another port it is OFF. Don't know if that would help with a diagnosis. Sorry again for the long post, but I've tried to include as much information as possible. At this point is there any hope of fixing it?
Thank you in advance and a huge thanks for being my "go-to" since my SM-T530nu.
Click to expand...
Click to collapse
I would first attempt to flash TWRP and see if it boots.
ashyx said:
I would first attempt to flash TWRP and see if it boots.
Click to expand...
Click to collapse
Sorry, I'm a little star struck that you responded to my post. I wanted to use the first TWRP i had installed, but it is a .img and I'm not sure how to use that without being able to access recovery mode. I am a baby when it comes to this stuff. I apologize for my lack of skills in this department. You guys that do this stuff for a living/hobby must have super human abilities. I've only been at this for several days and I'm already pulling my hair out.
kstehling said:
Sorry, I'm a little star struck that you responded to my post. I wanted to use the first TWRP i had installed, but it is a .img and I'm not sure how to use that without being able to access recovery mode. I am a baby when it comes to this stuff. I apologize for my lack of skills in this department. You guys that do this stuff for a living/hobby must have super human abilities. I've only been at this for several days and I'm already pulling my hair out.
Click to expand...
Click to collapse
Where do you find the image, it should also be available in tar format?
kstehling said:
Sorry, I'm a little star struck that you responded to my post. I wanted to use the first TWRP i had installed, but it is a .img and I'm not sure how to use that without being able to access recovery mode. I am a baby when it comes to this stuff. I apologize for my lack of skills in this department. You guys that do this stuff for a living/hobby must have super human abilities. I've only been at this for several days and I'm already pulling my hair out.
Click to expand...
Click to collapse
The Odin version of TWRP can be found here https://dl.twrp.me/gtaxlwifi/ When you flash it with Odin, be sure to go into options and uncheck "auto reboot". When it finishes, press and hold Home, Vol down and Power buttons till the screen goes black. Quickly shift from Vol down to Vol up buttons till the first screen appears. Keep holding Home and Vol up but release the power button. When the screen blanks you can release all the buttons and you should then be in the TWRP menu.
---------- Post added at 03:36 PM ---------- Previous post was at 03:29 PM ----------
kstehling said:
Hi everyone!
I hope I'm asking this in the right place. I think I may have really messed up my tablet. My apologies, this is going to be a long one.
After following some very bad advice I was using my SM-T580 8.1 (rooted with TWRP, Magisk and Manager) to explore Xposed. I now know Xposed + Samsung = bootloops. While trying to restore my poor little tablet I messed something up big time. When I tried to boot into recovery....it didn't work. So I booted into download mode and tried to flash stock firmware downloaded from Sammobile. While flashing with Odin 3.13.1, the connection was broken, my dog decided that it as the perfect moment for playtime. Now I can only boot into Odin mode and nothing else. To let it boot normally I get a bootloop with the Samsung Logo and the red warning "Could not boot into normal mode. Invalid Kernal length." Every time I try to flash the firmware I get "re-partition failed" error. I've tried two different PCs, 7 different USB cords, every USB port I have and stock firmware from 6.0 to 8.1. I've tried with and without the PIT file and tried checking/unchecking the repartition box in Odin's options. If I leave the repartition box empty is hangs on "setting up connection" and never moves past that. In the past week, I'm not sure how, I did get to the recovery menu. I cleared the cache and did a factory reset. It still went into the loop, so I tried recovery mode again and was able to look at the logs. I don't know why I looked because I really dont have any idea what they say. The only thing I did understand was that one of them said there was no recovery file. I assume this is a VERY bad thing. Since then I cant get back to it. Oh, depending on which USB port I plug into... sometimes the FRP is ON, with another port it is OFF. Don't know if that would help with a diagnosis. Sorry again for the long post, but I've tried to include as much information as possible. At this point is there any hope of fixing it?
Thank you in advance and a huge thanks for being my "go-to" since my SM-T530nu.
Click to expand...
Click to collapse
Are you using Home, Vol up and Power buttons to get to recovery? If that works, you can try Factory Reset from that menu. That should wipe the partitions so you can then go to download mode and flash with Odin. If not, then you'll have to try installing TWRP.
edit: If you can't get out of download mode, try the trick of Home, Vol down and Power till the screen blanks and quickly switching from Vol down to Vol up.
lewmur said:
The Odin version of TWRP can be found here... When you flash it with Odin, be sure to go into options and uncheck "auto reboot". When it finishes, press and hold Home, Vol down and Power buttons till the screen goes black. Quickly shift from Vol down to Vol up buttons till the first screen appears. Keep holding Home and Vol up but release the power button. When the screen blanks you can release all the buttons and you should then be in the TWRP menu.
---------- Post added at 03:36 PM ---------- Previous post was at 03:29 PM ----------
Are you using Home, Vol up and Power buttons to get to recovery? If that works, you can try Factory Reset from that menu. That should wipe the partitions so you can then go to download mode and flash with Odin. If not, then you'll have to try installing TWRP.
edit: If you can't get out of download mode, try the trick of Home, Vol down and Power till the screen blanks and quickly switching from Vol down to Vol up.
Click to expand...
Click to collapse
I have tried the Vol up + home + power to get to recovery without success. It happened once, days ago and I wiped the cache and tried a factory reset. It didnt work. I still get the bootloop with the Samsung logo and the Invalid Kernel length error at the top in red letters.
This afternoon I was able to download 3 different TWRP files for my device and tried to flash them. This time Odin stalled...
<OSM> Enter CS for MD5..
<OSM> Checking MD5.. Do not unplug the cable..
<OSM> Please wait..
and it never moves any further.
kstehling said:
I have tried the Vol up + home + power to get to recovery without success. It happened once, days ago and I wiped the cache and tried a factory reset. It didnt work. I still get the bootloop with the Samsung logo and the Invalid Kernel length error at the top in red letters.
This afternoon I was able to download 3 different TWRP files for my device and tried to flash them. This time Odin stalled...
<OSM> Enter CS for MD5..
<OSM> Checking MD5.. Do not unplug the cable..
<OSM> Please wait..
and it never moves any further.
Click to expand...
Click to collapse
Which version of Odin are you using? Also can you actually post screen shots of both odin after the failure and download mode on your device?
ashyx said:
Which version of Odin are you using? Also can you actually post screen shots of both odin after the failure and download mode on your device?
Click to expand...
Click to collapse
Odin 3.13.1
I'm not sure how to include a picture. I have several.
On the Odin/Download screen is says:
Odin Mode
Download Speed: Fast
Product Name: SM-T580
Current Binary: Samsung Official
System Status: Custom
FRP Lock: ON (or off depending on the day)
Secure Download: Enabled
Warranty Void: 1 (0x030c)
the last numbers are B:4 K:1 S:2
This is the log from my most recent attempt. First without the PIT file and then with it included. Don't know if it was the right thing to try, but at this point, why not
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 21 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005>
<ID:0/005> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 21 M
<ID:0/005> SetupConnection..
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
kstehling said:
This is the log from my most recent attempt. First without the PIT file and then with it included. Don't know if it was the right thing to try, but at this point, why not
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 21 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005>
<ID:0/005> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 21 M
<ID:0/005> SetupConnection..
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
Click to expand...
Click to collapse
I would suggest downloading the combination firmware and see if that can be flashed.
Also where did you obtain the PIT file and are you choosing repartition with the the PIT file loaded?
ashyx said:
I would suggest downloading the combination firmware and see if that can be flashed.
Also where did you obtain the PIT file and are you choosing repartition with the the PIT file loaded?
Click to expand...
Click to collapse
If the combination firmware is the BL, AP, CSC and Home CSC, it did not work. The only file I haven't tried to flash is the Home CSC because there aren't settings I was trying to keep. I got PIT file two ways. One was a download I found and another was by extracting it from the CSC file. I tried to compare them to the best of my ability and it seemed like they matched. I tried flashing with and without the repartition option. The only thing I haven't selected in the options is NAND erase.
I've tried
XAR-T580UEU1APF5
XAR-T580UEU4CRK5
XAR_T580XAR4CSC1
And GTAXLWIFI_EUR_OPEN.pit with all 3.
kstehling said:
If the combination firmware is the BL, AP, CSC and Home CSC, it did not work. The only file I haven't tried to flash is the Home CSC because there aren't settings I was trying to keep. I got PIT file two ways. One was a download I found and another was by extracting it from the CSC file. I tried to compare them to the best of my ability and it seemed like they matched. I tried flashing with and without the repartition option. The only thing I haven't selected in the options is NAND erase.
I've tried
XAR-T580UEU1APF5
XAR-T580UEU4CRK5
XAR_T580XAR4CSC1
And GTAXLWIFI_EUR_OPEN.pit with all 3.
Click to expand...
Click to collapse
Where did you obtain the combination firmware?
https://drive.google.com/file/d/1sSIFiAeBBL5EMKNyxE31aUfsH9CefnfI
ashyx said:
Where did you obtain the combination firmware?
https://drive.google.com/file/d/1sSIFiAeBBL5EMKNyxE31aUfsH9CefnfI
Click to expand...
Click to collapse
SamMobile and Samfew
kstehling said:
SamMobile and Samfew
Click to expand...
Click to collapse
I doubt that is the combination firmware.
Use the one I posted.
ashyx said:
I doubt that is the combination firmware.
Use the one I posted.
Click to expand...
Click to collapse
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 1016 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 1016 M
<ID:0/005> SetupConnection.. it got stuck here for more than 20 minutes.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
The first attempt was without the PIT, second try was with the PIT file as well as the repartition option checked. It did seem to take longer this time before it failed. I thought we were going to get lucky for a second.
kstehling said:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 1016 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 1016 M
<ID:0/005> SetupConnection.. it got stuck here for more than 20 minutes.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
The first attempt was without the PIT, second try was with the PIT file as well as the repartition option checked. It did seem to take longer this time before it failed. I thought we were going to get lucky for a second.
Click to expand...
Click to collapse
I suppose its worth now trying with nand erase.
ashyx said:
I suppose its worth now trying with nand erase.
Click to expand...
Click to collapse
Ok. I'll try it now. Should I use the PIT file? Or any of the others? BL, CSC? And just to be sure the file you gave me the link to should be in the AP spot, right?
I found how I could attach pictures for you. There is one that shows Odin with the "Pass" 1 successful/0 Failed. That happened in the middle of all of this by chance. I don't know if that helps any (I doubt it). The same problem was happening before it and after.
kstehling said:
I found how I could attach pictures for you. There is one that shows Odin with the "Pass" 1 successful/0 Failed. That happened in the middle of all of this by chance. I don't know if that helps any (I doubt it). The same problem was happening before it and after.
Click to expand...
Click to collapse
So you are able to flash the bootloader files?
Have you tried just AP?
kstehling said:
I found how I could attach pictures for you. There is one that shows Odin with the "Pass" 1 successful/0 Failed. That happened in the middle of all of this by chance. I don't know if that helps any (I doubt it). The same problem was happening before it and after.
Click to expand...
Click to collapse
I don't recognize the file you are using. The latest T580 stock ROM can be found here: https://www.sammobile.com/samsung/galaxy-tab-a-2016-101-wi-fi/firmware/SM-T580/
For the U.S. it is the one for Cellular South. It is a zip file that needs to be extracted. You only want to flash two of the four. The one starting with AP and the one starting with BP.
The Odin screen should look like the attached image before you click start. Don't change any of the default options.
My tablet is currently stuck in download mode where every time i try to cancel it, it just reboots back into download mode with the error "recovery:Error validating footer. (6)", "VBMETA T510XXU5CVG2, 54266617A" This occurred while i was messing around trying to root the tablet after i had attempted to flash TWRP to the device (ver: https://twrp.me/samsung/samsunggalaxytaba101wifi2016.html). I believe this is 2016 tab firmware and my tab is a 2019 which may be the reason its bricked, however i have attempted to flash 2 versions of what i believe to be the correct firmware, one from frija and one from samfw, with both failing in odin hanging on SetupConnection. At one point i was able to restart the tablet after these flashes with the error "An error has occurred while updating the device software. Use the Emergency recovery function in the Smart Switch PC software." After which i was able to flash the samfw firmware in a flash that only took 3 seconds to complete without the usual file logs.
logs:
<ID:0/006> Added!!
<ID:0/006> Odin engine v(ID:3.1401)..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> RQT_CLOSE !!
<ID:0/006> RES OK !!
<ID:0/006> Removed!!
<ID:0/006> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
This allowed me to clear the error but it is back to being stuck on downloading loop.
The bootloader was unlocked prior to this issue and i believe i was on a fresh unmodified boot.img prior to TWRP flash. I have not been able to find any information that has worked in helping me fix this issue.
Product Link: https://www.amazon.com/gp/product/B07Q3T1YJS/
Frija Version: T510XXU5CVG2/T510OXM5CVG2/T510XXU5CVG2
Frija Filename: SM-T510_1_20220725192041_c4u4t0y6d6_fac.zip.enc4
samfw file: https://samfw.com/firmware/SM-T510/XAR/T510XXU5CVG2
I would appreciate any help or advice anyone can give thanks!