Hi, I have S10+ and I want to enable native call recorder.
Now I have Android 11
SoftwareL SAOMC_SM-G975F_OVF_VD2_RR_0009
VD2/VD2,VD2/VD2
Czech Republic Vodafone branded
Version:
RP1A.200720.012.G975FXXU9FUCD
On www.samkey.org they told me to:
"
THL (THAILAND Call Recorder + Samsung Pay) supported by OXM csc
You must flash OXM (only csc) CSC by odin
Then use samkey for change csc
Flash via odin (only OXM csc) then use samkey with 1 credit
Flash OXM , when phone is boot up will ask erase data or NOT Press NO
"
Can I do it without any data deleted?
Or Can I just do the same things using just Odin somehow withoud their credits?
Related
After flashing a German Note3 with stock 4.4.2 using Odin with the official Open firmware from Poland XEO N9005XXUENB3 the phone is really slow, the SIM card is not recognized and the device has boot loops. The flash process succeeded and factory reset and cache wipe were executed from recovery mode.
Only from recovery mode KOT49H.N9005XXUENB3 it successfully boot when it is again stuck with the boot logo.
In the recovery mode the yellow lines below indicate that the CSC-code DBT (Germany)
The official file was flashed using the AP field and the file: N9005XXUENB3_N9005OXXENB1_HOME.tar.md5
The reason for flashing was to be able to switch to Vietnamese which is available in the XEO firmware.
The phone should have been unlocked because a Lebara SIM card worked before which is no longer being recognized.
Is there a way to restore the functionality within this firmware or do I need to go back to a different firmware ?
I would not mind also trying a Lollipop stock rom but currently do not want to try tripping Knox.
EDIT: Baseband and IMEI is UNKNOWN
EDIT2: Flashing back the DBT firmware N9005XXUGNG1 resolves all these problems but I would still like to be able to switch to Vietnamese (Viet Tieng) language
Hello everyone,
Sorry for my English...... I'm french (yes I know..... )
I have a problem. I need help and expertise.
I have a galasy s5 bought on the internet for the french market.
But I never had an upgrade it remains nailed in 4.4.2.
After information with service, it turns out that in reality it was planned for Baltic market and therefore the updates OTA, Kies Smartswitche, samsung shop does not work. Samsung has sent me on the roses .... they can do that but they need to have my phone for 3 weeks....
Here is the information I have (Phone Info):
SM G900F
Klte / kltexx
Knox 0x0
SM- G900FZKASEB
Origin CSS SEB
Current CSC SEB
Firmware SEB
Available CSC (many including the XEF)
CSc country BALTIC / LV
Bootloader G900FXXU1ANJ1
PDA G900FXXU1ANJ1
CSC G900FOXX1ANJ1
Base Bande G900FXXU1ANJ1
My aim:
Update to last firmware for my country (France no carrier ) with original firmware and OTA available for original security or firmware updates. If possible without lost of my data..... but if necessary, to have stabilty, i can do a reset....
So if someone can give a good complete protocol with steps ......
thanks in advance!!!!!
EDIT:
Well Well!!!
No idea ???
I discover a method on another site
1. Run and configure Odin. Do NOT check “Re-Partition” and “Auto Reboot” check boxes.
2. Load the stock firmware in the PDA button.
3. Set the phone in download mode (Volume Down+Home+Power button). Then connect the phone in your computer.
4. Hit the “Start” button and then wait.
5. Once the flashing successfully completed. Do NOT let it reboot into the normal mode.
6. Reboot into recovery mode (Volume Up+Home+Power button).
7. See if it’s applying the CSC file then wait until it finishes and reboot.
8. If you do not see the CSC installation, instead choose the “Wipe data/Factory reset”. Then repeat flashing the stock firmware. You may then achieved the CSC code flashing the stock firmware on the second attempt.
10. Confirm the CSC code by using Kies 3 or by downloading Phone INFO ★Samsung★ and see if the CSC code has changed.
any help??opinion???
Hello everyone,
Sorry for my English...... I'm french (yes I know..... )
I have a problem. I need help and expertise.
I have a galasy s5 bought on the internet for the french market.
But I never had an upgrade it remains nailed in 4.4.2.
After information with service, it turns out that in reality it was planned for Baltic market and therefore the updates OTA, Kies Smartswitche, samsung shop does not work. Samsung has sent me on the roses .... they can do that but they need to have my phone for 3 weeks....
Here is the information I have (Phone Info):
SM G900F
Klte / kltexx
Knox 0x0
SM- G900FZKASEB
Origin CSS SEB
Current CSC SEB
Firmware SEB
Available CSC (many including the XEF)
CSc country BALTIC / LV
Bootloader G900FXXU1ANJ1
PDA G900FXXU1ANJ1
CSC G900FOXX1ANJ1
Base Bande G900FXXU1ANJ1
My aim:
Update to last firmware for my country (France no carrier ) with original firmware and OTA available for original security or firmware updates. If possible without lost of my data..... but if necessary, to have stabilty, i can do a reset....
So if someone can give a good complete protocol with steps ......
thanks in advance!!!!!
EDIT:
Well Well!!!
No idea ???
I discover a method on another site
1. Run and configure Odin. Do NOT check “Re-Partition” and “Auto Reboot” check boxes.
2. Load the stock firmware in the PDA button.
3. Set the phone in download mode (Volume Down+Home+Power button). Then connect the phone in your computer.
4. Hit the “Start” button and then wait.
5. Once the flashing successfully completed. Do NOT let it reboot into the normal mode.
6. Reboot into recovery mode (Volume Up+Home+Power button).
7. See if it’s applying the CSC file then wait until it finishes and reboot.
8. If you do not see the CSC installation, instead choose the “Wipe data/Factory reset”. Then repeat flashing the stock firmware. You may then achieved the CSC code flashing the stock firmware on the second attempt.
10. Confirm the CSC code by using Kies 3 or by downloading Phone INFO ★Samsung★ and see if the CSC code has changed.
any help??opinion???
Download the firmware for the Galaxy J7 Prime SM-G610M with product code TTT from Trinidad and Tobago. This firmware has version number PDA G610MUBS1BRF3 and CSC G610MUUB1BRD1. The operating system of this firmware is Android 7.0 , with build date Thu, 14 Jun 2018 23:11:07 +0000. Security patch date is 2018-06-01, with changelist 12546423.
- Model ... SM-G610M
- Model name ... Galaxy J7 Prime
- Country ... Trinidad and Tobago
- Version ... Android 7.0
- Changelist ... 12546423
- Build date ... Thu, 14 Jun 2018 23:11:07 +0000
- Security Patch Level ... 2018-06-01
- Product code ... TTT
- PDA ... G610MUBS1BRF3
- CSC ... G610MUUB1BRD1
Download Firmware ... Sammobile
https://www.sammobile.com/firmwares/galaxy-j7-prime/SM-G610M/TTT/download/G610MUBS1BRF3/225631/
Download Firmware ... Mediafire
https://www.mediafire.com/file/muav9i3bb2o5003/Android_7_Nougat_Stock_J7_Prime_SM-G610M-DS_%255BTTT_-_B1%255D_%255B21-07-2018%255D_By_JHAM2005.rar/file
Download ... Odin
https://www.mediafire.com/file/b31gmzgmx9hn4l8/Odin3-v3.13.1.zip/file
Download ... Samsung USB Driver
https://www.mediafire.com/file/ge9eff95t3dbda0/Samsung_USB_Driver_for_Mobile_Phones_1.5.51.0.exe/file
Installation Instructions
1.- Download Odin 3.13.1 + Samsung USB Driver
2.- Extract the firmware file you just downloaded. You should get 5 files:
- AP (System &Recovery)
- BL (Bootloader)
- CP (Modem / Radio)
- CSC_*** (Country / Region / Operator)
- HOME_CSC_*** (Country / Region / Operator)
3.- Add each file to it's respective field in Odin v3.13.1. Use CSC_*** if you want to do a clean flash or HOME_CSC_*** if you want to keep your apps and data.
4.- Reboot your phone in Download / Odin mode with the following button combo: POWER + VOLUME DOWN + BIXBY
Other options in case first option did not work or isn't possible.
- Option 2 VOLUME DOWN + VOLUME UP than USB cable
- Option 3 POWER + VOLUME DOWN + VOLUME UP
- Option 4 POWER + VOLUME DOWN + HOME BUTTON
5.- Once in download mode, connect your phone to the PC, preferably using the original USB cable you got with your phone. Odin should detect your device and a BLUE box will show up with the COM port number. (Be sure, the SAMSUNG-drivers are installed on your PC!)
6.- Do NOT tick any extra boxes. The only options to be ticked are F.Reset Time and Auto-Reboot.
7.- Click the start button, wait for Odin to say 'PASS' in a GREEN box. Once the flash is complete, your phone will reboot, and you can disconnect your phone from the PC.
How to Root J7 Prime * G610M - G610M/DS * Android 7 Nougat Stock
NOTE:
1.- IT IS NECESSARY TO GO TO: Settings -> Developer Options -> OEM unlocking AND ENABLE OEM UNLOCK FIRST OR YOU MAY ENCOUNTER 'BLOCKED BY FRP LOCK' WHEN FLASHING.
2.- KNOX will be tripped once you flashed custom binaries to your phone.
3.- Samsung Firmware System Updates will no longer work once you flashed custom binaries.
How to Install
1.- Install the Stock Firmware with Odin
2.- Install TWRP
3.- It is necessary to have the files to release the memory and the root file in the Pendrive (USB) to use them by OTG
4.- Enter the advanced recovery and install the ... zip ... no-verity-opt-encrypt.zip ... need a OTG adapter + USB Pendrive
5.- Go back and give ... Then Format Data ... YES ...
6.- Restart the mobile
7.- Configure the mobile to suit the user
8.- Turn off the mobile and enter the Recovery
9.- Install the root zip to use ... SuperSU or Magisk
Restart the mobile
Enjoy :fingers-crossed:
MOUNT INTERNAL STORAGE
- To mount internal storage you need to remove forced encryption by flashing this zip in TWRP
no-verity-opt-encrypt.zip
- Then you may need to format/data to boot properly.
Download ... Recovery (TWRP)
https://www.mediafire.com/file/elwuin9e8jnca2a/TWRP-3.2.1-For-Galaxy-J7-Prime.tar/file
Download ... no-verity-opt-encrypt
https://www.mediafire.com/file/6e6ger5w5i5w1bl/no-verity-opt-encrypt-6.0.zip/file
Download ... SuperSU
https://www.mediafire.com/file/ukltn1drrf1lj1b/SuperSU-v2.82-201705271822.zip/file
Download ... Magisk
https://www.mediafire.com/file/16m3m8bqdtc3v9a/Magisk_-_Root_%2526_Universal_Systemless_Interface_16.7.rar/file
Hi friends
I have Samsung S5 Neo (SM-G903F) 5.1.1 Lollipop.
1) I would like to flash LineageOS version 16. (by WEB infos it is possible) ... Moreover I would like to root my phone.
2) Last week I instaled TWRP via ODIN and it worked. I succefully made a backup of my phone with it.
3) I choosed at first ROOT for my device (to have a ROOT and with unlocked bootloader). And after it I would like to flash LineageOS 16.
4) So yesterday I made SF-Auto-Root. Not completely with success. ODIN showed a green PASS, phone restarted and worked normaly. But not ROOTED.
5) Today I test to open RECOVERY (VOL+/HOME/POWER), but TWRP not started and shortly showing RED text:
"Recovery is not seandroid enforcing. Custom binary blocked by FRP lock".
What now?
This is output from Phone info:
Product Code: SM-G903FZKAORX
Original CSC Code: ORX
Firmware's CSC Code: ORX
Active CSC Code: ORX
Available CSC Codes:
BGL, CYO, ERO, ETL, MET, ORX, ROM, SEB, SEE, SIO, TPH, TWO, XEH
CSC Country: Slovakia/SK
Mobile Operator: VodafoneCZ/23003
Root Existence: No
Android Version: 5.1.1 / SDK 22 (Lollipop)
Build Number: LMY47X.G903FXXU1APA2
Build Fingerprint: samsung/s5neoltexx/s5neolte:5.1.1/LMY47X/
G903FXXU1APA2:user/release-keys
Build Description: s5neoltexx-user 5.1.1 LMY47X
G903FXXU1APA2 release-keys
Build Date: Fri Jan 8 14:03:38 KST 2016
Bootloader Version: G903FXXU1APA2
PDA Version: G903FXXU1APA2
CSC Version: G903FOXX1APA1
Baseband Version: G903FXXU1APA2
Latest Firmware: G903FXXU2BRH2/G903FORX2BRI1/G903FXXU2BRH2
Firmware Status:
Kernel Version: 3.10.61-5560999 [email protected]SWDD6609 #1
********************************************************************************
Mostly I read, that only possibility to solve FRP is reflash device with stock rom.
But:
I read somewhere, that in case of FRP lock is NOT POSSIBLE use ODIN for flashing stock rom , because it will be blocked due to FRP, but to use KIES3 or SMART SWITCH.
They were written that KIES3 or SMART SWITCH rewrite status of FRP, what is not possible to do via ODIN.
Must be flash done with USB developed options + OEM unlock (this one for masking of FRP flag) ?
Am I right? I would like to do maximum NOT TO RISK a device brick.
Thanks in advance for Your help - with best regards Peter.
I am back ...
So I'm back. It was enough only downloaded TWRP again via ODIN. The FRP flag is still ON, but when the debugging mode is enabled, the UNLOCK OEM function is masking FRP and RECOVERY and BACKUP / RESTORE etc. is possible.
In the future I will download stock ROM to clear the FRP flag.