Related
Is there anyway that i can auto-rotate TWRP ??
Im using TWRP with multirom ..
Unfortunately my digitizer broke and the navigation area is not working.. ( Temporarily i'm managing the phone with full auto-rotation from gravity-box )
MAIN problem is im unable to use the "Swipe to flash" area in TWRP because of the broken digitizer..
I planned to use CWM but im afraid of loosing multirom..
So guys please suggest me about auto-rotation in TWRP or any other alternative idea to flash in MULTIROM..
How do i delete this thread ??
Sidnexus4 said:
How do i delete this thread ??
Click to expand...
Click to collapse
Did u found a solution ?
jithuelad said:
Did u found a solution ?
Click to expand...
Click to collapse
Nope i didnt .. but i dont think TWRP has an auto-rotation.. if at all it existed at-least 1 would have suggested among the 100 views..
Try flashing CWM (non-touch) or PhilZ recovery, they might work for you... they use the Vol and Power buttons to perform recovery functions. It is simple to install or switch even if the screen is not working, you can do it through fastboot with a single command...
fastboot flash recovery cwmrecoveryimage.img
of course, substitute the actual recovery image file name.
EDIT: Nevermind... I didn't see you were using MultiROM until it was too late, I should probably read more thoroughly before replying.
acejavelin said:
EDIT: Nevermind... I didn't see you were using MultiROM until it was too late, I should probably read more thoroughly before replying.
Click to expand...
Click to collapse
No worry's bro.. i already did that. I wasn't able to control my self with out flashing Android L
By the way i have a question for u..
After every thing is back to normal can i just flash TWRP and multiROM directly with out any wipes and resets?
Sidnexus4 said:
No worry's bro.. i already did that. I wasn't able to control my self with out flashing Android L
By the way i have a question for u..
After every thing is back to normal can i just flash TWRP and multiROM directly with out any wipes and resets?
Click to expand...
Click to collapse
Honestly don't know... Never used multirom.
use the sideload option!
Has anyone gotten TWRP to mount/backup to OTG? I can't even get it to mount in TWRP (Using OP adapter) but OTG works fine in the OS
Anyone?? @TWRP Recovery
I have the same problem!
Resolution ??
THX!
idbl_fanatic said:
Has anyone gotten TWRP to mount/backup to OTG? I can't even get it to mount in TWRP (Using OP adapter) but OTG works fine in the OS
Click to expand...
Click to collapse
alesfot73 said:
I have the same problem!
Resolution ??
THX!
Click to expand...
Click to collapse
I also have the same problem. official TWRP you have? that version?
Official twrp 2.7.8.0
alesfot73 said:
Official twrp 2.7.8.0
Click to expand...
Click to collapse
I have tested this version and other unofficial but neither works.
I think the problem is only TWRP version, becouse in Andorid work perfect....!
alesfot73 said:
I think the problem is only TWRP version, becouse in Andorid work perfect....!
Click to expand...
Click to collapse
Yes, I hope that support in future updates.
I have send a email to TWRP support
Maybe on next version.
alesfot73 said:
I have send a email to TWRP support
Click to expand...
Click to collapse
I haven't been able to use my otg on my opt yet because I had to order an adapter. Are you guys telling me that TWRP doesn't even recognize otg on the opt??
dgrasley said:
I haven't been able to use my otg on my opt yet because I had to order an adapter. Are you guys telling me that TWRP doesn't even recognize otg on the opt??
Click to expand...
Click to collapse
Yup, that's what I'm saying...... I fixed mine though...... Got a nexus 6 LOL
alesfot73 said:
I have send a email to TWRP support
Click to expand...
Click to collapse
Me too. Have if they implement the next version.
I received update 2.1.2 today... But when i update it its fail.......
OnePlusTwo +Rooted +Xposed framework
pritesh1996 said:
I received update 2.1.2 today... But when i update it its fail.......
OnePlusTwo +Rooted +Xposed framework
Click to expand...
Click to collapse
First flash 2.1.1 full, after flash ota 2.1.2.
So, if otg isn't working in twrp, what is everyone doing as a workaround?
My last device was the N5 and I would flash a different ROM a few times a month or more. I always preferred to wipe everything, including internal storage, then install the ROM clean and fresh.
With the OPT, I've just been doing normal wipe and flashing over top. Problem is that the sdcard is getting cluttered with folders from previous installs.
I was hoping to be able to wipe internal storage, connect the OPT to my laptop and sideload the ROM using adb. The OPT doesn't show up when I use 'adb devices'. It just says 'List of devices'... I've installed the naked and universal drivers. No luck.
So for now it looks like I'm stuck without a way to wipe the device clean and start fresh, unless someone else has figured out a way to get it to work.
dgrasley said:
So, if otg isn't working in twrp, what is everyone doing as a workaround?
My last device was the N5 and I would flash a different ROM a few times a month or more. I always preferred to wipe everything, including internal storage, then install the ROM clean and fresh.
With the OPT, I've just been doing normal wipe and flashing over top. Problem is that the sdcard is getting cluttered with folders from previous installs.
I was hoping to be able to wipe internal storage, connect the OPT to my laptop and sideload the ROM using adb. The OPT doesn't show up when I use 'adb devices'. It just says 'List of devices'... I've installed the naked and universal drivers. No luck.
So for now it looks like I'm stuck without a way to wipe the device clean and start fresh, unless someone else has figured out a way to get it to work.
Click to expand...
Click to collapse
I'm in the same situation
But I have rooted and Xposed + "kerneled" my phone several times since I have mine and you can be sure, wiping everything but internal storage is clearly the exact same thing as cleaning everything, since internal storage only contains files like your downloads, music, photos... and some apps files but never configuration or settings files.
You really start from scratch if you wipe everything but internal storage.
morback said:
I'm in the same situation
But I have rooted and Xposed + "kerneled" my phone several times since I have mine and you can be sure, wiping everything but internal storage is clearly the exact same thing as cleaning everything, since internal storage only contains files like your downloads, music, photos... and some apps files but never configuration or settings files.
You really start from scratch if you wipe everything but internal storage.
Click to expand...
Click to collapse
I would make a back up, and then copy it to the computer, but if you REALLY mess something up, that will do you no good because you won't be able to restore, my workaround for the OTG in TWRP was to get a Nexus 6 LOL
Anyone able to create a restart menu that can restart to recovery? Have tried to do a few instructions but run into areas that do not match and it gets quite confusing for me. So anyone can assist would be great. I have a SM-T550
bobfrantic said:
Anyone able to create a restart menu that can restart to recovery? Have tried to do a few instructions but run into areas that do not match and it gets quite confusing for me. So anyone can assist would be great. I have a SM-T550
Click to expand...
Click to collapse
Did you get any PMs or figure anything out, other than Xposed and Gravitybox. That's how I get an extended reboot menus like you get in CM builds.
glockman4519 said:
Did you get any PMs or figure anything out, other than Xposed and Gravitybox. That's how I get an extended reboot menus like you get in CM builds.
Click to expand...
Click to collapse
Haven't received any information at all. I did attempt to do it from this Post but failed for some reason and my tablet wouldn't boot, just stuck on logo. Not thought of xposed module at all because I would think it would act as a third party app. Those do not get along well with the TWRP 3.0.2-1 recovery by @ashyx. If you use 3rd party app to reboot to recovery with that version, you'll be stuck in recovery and not be able to boot to system until you reinstall the recovery with same instructions as first time you install it.
bobfrantic said:
Haven't received any information at all. I did attempt to do it from this Post but failed for some reason and my tablet wouldn't boot, just stuck on logo. Not thought of xposed module at all because I would think it would act as a third party app. Those do not get along well with the TWRP 3.0.2-1 recovery by @ashyx. If you use 3rd party app to reboot to recovery with that version, you'll be stuck in recovery and not be able to boot to system until you reinstall the recovery with same instructions as first time you install it.
Click to expand...
Click to collapse
I'm using TWRP 2.8.7.0 by @ashyx and I use the reboot function in Gravitybox and it is working just fine for me with no bootloops. I will look into how to add the reboot function into the rom and see if I come up with anything and if I do, I will be sure to let you know.
I tried @ashyx 2.8.7 twrp but touches were way out of line so had to go back to 3.0.2 recovery. I think it has to do with the MM 6.0.1 firmware.
Sent from my S4 via NSA wifi
glockman4519 said:
I'm using TWRP 2.8.7.0 by @ashyx and I use the reboot function in Gravitybox and it is working just fine for me with no bootloops. I will look into how to add the reboot function into the rom and see if I come up with anything and if I do, I will be sure to let you know.
Click to expand...
Click to collapse
By the wy what tab you have? What firmware also?
Sent from my S4 via NSA wifi
bobfrantic said:
By the wy what tab you have? What firmware also?
Click to expand...
Click to collapse
I have the t350 and am on my rom 6.0.1 latest firmware release. I forgot that yours is a different dsvice and may not function ghe same as mine.
glockman4519 said:
I have the t350 and am on my rom 6.0.1 latest firmware release. I forgot that yours is a different dsvice and may not function ghe same as mine.
Click to expand...
Click to collapse
yea that may be the reason the 2.8.7 doesn't like my tab being it's T550. you should make your rom work on the 550 hehehe
bobfrantic said:
yea that may be the reason the 2.8.7 doesn't like my tab being it's T550. you should make your rom work on the 550 hehehe
Click to expand...
Click to collapse
If I had that device for testing I would. I would hate to make something that would screw up someone's device. If its mine, I dont care but not on someone else's.
If it is rooted, give this a try.
https://play.google.com/store/apps/details?id=simple.reboot.com
hectorbls said:
If it is rooted, give this a try.
https://play.google.com/store/apps/details?id=simple.reboot.com
Click to expand...
Click to collapse
I use Simple Reboot for now. Still holding out hope someone can make a restart menu. :cyclops:
A+ for simple reboot, been using it on a few different androids and no problems.
I can't find this anywhere. Every guide seems to assume that everyone has a micro SD in their phone. Currently, I don't have one. I'm wondering if an S7 Edge root is possible without an SD card.
diraga said:
I can't find this anywhere. Every guide seems to assume that everyone has a micro SD in their phone. Currently, I don't have one. I'm wondering if an S7 Edge root is possible without an SD card.
Click to expand...
Click to collapse
try this
mashardpro said:
try this
Click to expand...
Click to collapse
I have tried the CF-Auto-Root method twice now, both resulting in being stuck on boot like the other times. However, maybe I needed to wait longer? Next time I attempt a root I will leave the phone alone for at least 15 minutes before I call it a failure. Still, the post you linked seems to be for older firmware. Would you still recommend the method for Nougat? Thanks for the reply.
diraga said:
I have tried the CF-Auto-Root method twice now, both resulting in being stuck on boot like the other times. However, maybe I needed to wait longer? Next time I attempt a root I will leave the phone alone for at least 15 minutes before I call it a failure. Still, the post you linked seems to be for older firmware. Would you still recommend the method for Nougat? Thanks for the reply.
Click to expand...
Click to collapse
then you can try twrp , and use adb sideload if you don't have sdcard
mashardpro said:
then you can try twrp , and use adb sideload if you don't have sdcard
Click to expand...
Click to collapse
I think I've isolated the problem. After using adb sideloader to install magisk and antiroot remover, I'm prompted to reboot. In other guides, there is a further options screen after pressing the reboot button which has a couple checked boxes and a button that says "Do Not Install". I see this screen for maybe a third of a second after selecting Reboot before the device reboots on its own. Just tried this and now I'm stuck on the Samsung boot logo once again.
Note: There are many errors in the adb sideloader log relating to being unable to mount/unmount /data/ and stuff like that that I know are related to having an SD inserted.
Edit: I should also note that I am new to android. Fresh newbee from iOS, but I have been jailbreaking for the past 9 years. Still in over my head I think.
diraga said:
I think I've isolated the problem. After using adb sideloader to install magisk and antiroot remover, I'm prompted to reboot. In other guides, there is a further options screen after pressing the reboot button which has a couple checked boxes and a button that says "Do Not Install". I see this screen for maybe a third of a second after selecting Reboot before the device reboots on its own. Just tried this and now I'm stuck on the Samsung boot logo once again.
Note: There are many errors in the adb sideloader log relating to being unable to mount/unmount /data/ and stuff like that that I know are related to having an SD inserted.
Edit: I should also note that I am new to android. Fresh newbee from iOS, but I have been jailbreaking for the past 9 years. Still in over my head I think.
Click to expand...
Click to collapse
hmmmm, I am a bit confused as well. I am successful with that way. Or read this for other options. But I do not know work or not, because the last link I had never tried
mashardpro said:
hmmmm, I am a bit confused as well. I am successful with that way. Or read this for other options. But I do not know work or not, because the last link I had never tried
Click to expand...
Click to collapse
Still confused... I really don't want to reset my phone for the fourth time today. Please help!
diraga said:
Still confused... I really don't want to reset my phone for the fourth time today. Please help!
Click to expand...
Click to collapse
Well, it seems like all I know already I mentioned, better use of existing first now while waiting for someone who can help you. btw, the root will be used for what?
diraga said:
Still confused... I really don't want to reset my phone for the fourth time today. Please help!
Click to expand...
Click to collapse
Once data is wiped in twrp then reboot back to recovery and connect usb to pc. You should be able to copy SuperSU zip via mtp and your phone should show up on pc. Flash SuperSU zip once copied
mashardpro said:
Well, it seems like all I know already I mentioned, better use of existing first now while waiting for someone who can help you. btw, the root will be used for what?
Click to expand...
Click to collapse
Deleting stock apps, installing adblock, exploring non-Google Play apps, possibly installing custom ROM. I enjoy seeing what my phone can do.
ASHLEY117 said:
Once data is wiped in twrp then reboot back to recovery and connect usb to pc. You should be able to copy SuperSU zip via mtp and your phone should show up on pc. Flash SuperSU zip once copied
Click to expand...
Click to collapse
The phone is recognized on the PC but there are no folders. Any files I try to drag over come up with an error. Furthermore, I could use the stock firmware USB to store the necessary files on it, but I can't seem to navigate to the same storage destination via the TWRP file browser.
diraga said:
The phone is recognized on the PC but there are no folders. Any files I try to drag over come up with an error. Furthermore, I could use the stock firmware USB to store the necessary files on it, but I can't seem to navigate to the same storage destination via the TWRP file browser.
Click to expand...
Click to collapse
You could copy SuperSU zip to a usb flash drive and use the otg adapter that came with the s7? Twrp support otg usb install.
diraga said:
The phone is recognized on the PC but there are no folders. Any files I try to drag over come up with an error. Furthermore, I could use the stock firmware USB to store the necessary files on it, but I can't seem to navigate to the same storage destination via the TWRP file browser.
Click to expand...
Click to collapse
so you have twrp now?
ASHLEY117 said:
You could copy SuperSU zip to a usb flash drive and use the otg adapter that came with the s7? Twrp support otg usb install.
Click to expand...
Click to collapse
That's... a really good idea. Going to try right now!
mashardpro said:
so you have twrp now?
Click to expand...
Click to collapse
I've had no trouble installing TWRP whatsoever. I've done it five times today!
diraga said:
That's... a really good idea. Going to try right now!
I've had no trouble installing TWRP whatsoever. I've done it five times today!
Click to expand...
Click to collapse
seems nice, good luck. maybe lacking some finishing touches you need to do. I remember well my first too so, and the key is I have to format the data in twrp
ASHLEY117 said:
You could copy SuperSU zip to a usb flash drive and use the otg adapter that came with the s7? Twrp support otg usb install.
Click to expand...
Click to collapse
mashardpro said:
seems nice, good luck. maybe lacking some finishing touches you need to do. I remember well my first too so, and the key is I have to format the data in twrp
Click to expand...
Click to collapse
Update: Still stuck on Samsung boot logo after 15+ minutes after successfully loading from usb drive. TWRP still skipped right by the reboot options screen after the install... I have no clue why it's doing that. It's like it's taking the command to reboot after I press the button and processing it while it is going to the next screen. I don't know. Hopefully someone does. It's so close!
EDIT: IT WORKED!!! Had to format and then installing from usb drive worked great! Thank you so much!!
diraga said:
Update: Still stuck on Samsung boot logo after 15+ minutes after successfully loading from usb drive. TWRP still skipped right by the reboot options screen after the install... I have no clue why it's doing that. It's like it's taking the command to reboot after I press the button and processing it while it is going to the next screen. I don't know. Hopefully someone does. It's so close!
EDIT: IT WORKED!!! Had to format and then installing from usb drive worked great! Thank you so much!!
Click to expand...
Click to collapse
I am glad to hear it. Like I said, just need the final touch that you might forget
mashardpro said:
I am glad to hear it. Like I said, just need the final touch that you might forget
Click to expand...
Click to collapse
False alarm! Root checker says my phone is not rooted... I'm lost... At least my phone booted?
diraga said:
False alarm! Root checker says my phone is not rooted... I'm lost... At least my phone booted?
Click to expand...
Click to collapse
so if you have twrp and your phone is booted, then take a look this. quite easy to understand
mashardpro said:
so if you have twrp and your phone is booted, then take a look this. quite easy to understand
Click to expand...
Click to collapse
Currently following this tutorial and awaiting boot past the Samsung logo. Hoping it works. I see no reason why it shouldn't.
Edit: Running a rooted Android. Thanks
i have ALE-21 runing b958 unlocked bootloader
with twrp 3xx every time i boot into recovery and start touch the first screen of twrp device restart
and that happens for alot of twrp v
any solutions
The_username said:
i have ALE-21 runing b958 unlocked bootloader
with twrp 3xx every time i boot into recovery and start touch the first screen of twrp device restart
and that happens for alot of twrp v
any solutions
Click to expand...
Click to collapse
That used to happen to me. My phone vibration was broken, but a few days ago it started working again and twrp also started working, so I wonder, does your phone vibration work?
Lemon476 said:
That used to happen to me. My phone vibration was broken, but a few days ago it started working again and twrp also started working, so I wonder, does your phone vibration work?
Click to expand...
Click to collapse
not working
The_username said:
not working
Click to expand...
Click to collapse
That's it then. For some reason, TWRP doesn't seem to work if vibration doesn't work.
Lemon476 said:
That's it then. For some reason, TWRP doesn't seem to work if vibration doesn't work.
Click to expand...
Click to collapse
so there is no possible solution for twrp to work without vibration
The_username said:
so there is no possible solution for twrp to work without vibration
Click to expand...
Click to collapse
I don't really know, sorry, my phone vibration just started working on his own, and so TWRP did. Try asking OpenKirin team on their thread why TWRP doesn't work if vibration doesn't, this is all I can tell you
The_username said:
i have ALE-21 runing b958 unlocked bootloader
with twrp 3xx every time i boot into recovery and start touch the first screen of twrp device restart
and that happens for alot of twrp v
any solutions
Click to expand...
Click to collapse
Where did you get b958 ROM?
What emui version does it have?
Did you mis spell it ?
Never heard about b958.
miststudent2011 said:
Where did you get b958 ROM?
What emui version does it have?
Did you mis spell it ?
Never heard about b958.
Click to expand...
Click to collapse
b895 miss spelled