i have ALE-21 runing b958 unlocked bootloader
with twrp 3xx every time i boot into recovery and start touch the first screen of twrp device restart
and that happens for alot of twrp v
any solutions
The_username said:
i have ALE-21 runing b958 unlocked bootloader
with twrp 3xx every time i boot into recovery and start touch the first screen of twrp device restart
and that happens for alot of twrp v
any solutions
Click to expand...
Click to collapse
That used to happen to me. My phone vibration was broken, but a few days ago it started working again and twrp also started working, so I wonder, does your phone vibration work?
Lemon476 said:
That used to happen to me. My phone vibration was broken, but a few days ago it started working again and twrp also started working, so I wonder, does your phone vibration work?
Click to expand...
Click to collapse
not working
The_username said:
not working
Click to expand...
Click to collapse
That's it then. For some reason, TWRP doesn't seem to work if vibration doesn't work.
Lemon476 said:
That's it then. For some reason, TWRP doesn't seem to work if vibration doesn't work.
Click to expand...
Click to collapse
so there is no possible solution for twrp to work without vibration
The_username said:
so there is no possible solution for twrp to work without vibration
Click to expand...
Click to collapse
I don't really know, sorry, my phone vibration just started working on his own, and so TWRP did. Try asking OpenKirin team on their thread why TWRP doesn't work if vibration doesn't, this is all I can tell you
The_username said:
i have ALE-21 runing b958 unlocked bootloader
with twrp 3xx every time i boot into recovery and start touch the first screen of twrp device restart
and that happens for alot of twrp v
any solutions
Click to expand...
Click to collapse
Where did you get b958 ROM?
What emui version does it have?
Did you mis spell it ?
Never heard about b958.
miststudent2011 said:
Where did you get b958 ROM?
What emui version does it have?
Did you mis spell it ?
Never heard about b958.
Click to expand...
Click to collapse
b895 miss spelled
Related
Hey,
So I flashed a custom rom on my AT&T Galaxy S IV. Everything seems to be working fine.
Until, I hold on my power menu than click on Reboot my phone. When I do that, my phone shuts down and reboots but it's always stuck in the Samsung Custom Screen. The max I have waited is 30 minutes for it to work. But it never does.
I'm running TWRP Recovery Mode.
I tried every roms in the AT&T Section. All of them seems to have that problem. I also used ktoonsez kernel. Nothing at all.
With stock AT&T rom everything seems to be fine.
I was wondering if it's happening to you guys as well. If you can try, please hold into your power button and reboot your phone clicking on reboot.
Thank you!
I have that happen sometimes, but if I go into recovery when that happens and fix permissions it boots up fine after.
Sent from my SGH-I337 using Tapatalk 4 Beta
Flash a different kernel.
Period
your welcome
TehZam said:
Hey,
So I flashed a custom rom on my AT&T Galaxy S IV. Everything seems to be working fine.
Until, I hold on my power menu than click on Reboot my phone. When I do that, my phone shuts down and reboots but it's always stuck in the Samsung Custom Screen. The max I have waited is 30 minutes for it to work. But it never does.
I'm running TWRP Recovery Mode.
I tried every roms in the AT&T Section. All of them seems to have that problem. I also used ktoonsez kernel. Nothing at all.
With stock AT&T rom everything seems to be fine.
I was wondering if it's happening to you guys as well. If you can try, please hold into your power button and reboot your phone clicking on reboot.
Thank you!
Click to expand...
Click to collapse
make sure you flashed the correct ktoonsez kernal..one for aosp, one for touchwiz
And flash Loki Doki patch if required, although you'd probably get the 'software not compatible' error if Loki was missing.
KonoeKyon said:
I have that happen sometimes, but if I go into recovery when that happens and fix permissions it boots up fine after.
Sent from my SGH-I337 using Tapatalk 4 Beta
Click to expand...
Click to collapse
I'll try and post back to you!
TheAxman said:
Flash a different kernel.
Period
your welcome
Click to expand...
Click to collapse
If you don't mind me asking, what kernel are you using?
mixlex said:
make sure you flashed the correct ktoonsez kernal..one for aosp, one for touchwiz
Click to expand...
Click to collapse
I have used the Touchwiz kernal.
blyndfyre said:
And flash Loki Doki patch if required, although you'd probably get the 'software not compatible' error if Loki was missing.
Click to expand...
Click to collapse
Tried that and done that, no go.
________________________________________
Thank you everybody for the help.
what procedures are you using for all of this? is there a specific guide you are following?
xBeerdroiDx said:
what procedures are you using for all of this? is there a specific guide you are following?
Click to expand...
Click to collapse
So at first I used this [ROOT] Root Samsung Galaxy S4 with Motochopper. Same problem.
Went back to stock and used this
[ROOT[RECOVERY] Loki + TWRP + Motochopper CASUAL-R527b release:27May13. Same problem encountered.
Went back to stock and did it again using Same problem with this one as well.
It happens with every custom rom besides the stock rom and Cyanogenmod Rom. I can't even reboot to do anything .
Thanks for the help guys, I greatly appreciate it.
There is something else happening, does this happen on a backup you may have?
You do have a backup correct? It is rule #1
TheAxman said:
There is something else happening, does this happen on a backup you may have?
You do have a backup correct? It is rule #1
Click to expand...
Click to collapse
Yes, I do have a backup. It happens to every custom ROM that I have encountered with.
Stock & Cyanogenmod roms work fine when rebooting.
Would you mind sharing what kernel you are using? I jused used faux kernel. Same thing.
i meant more like what procedures are you using when you wipe and flash? your issue is not related to root method or a particular custom recovery.
xBeerdroiDx said:
i meant more like what procedures are you using when you wipe and flash? your issue is not related to root method or a particular custom recovery.
Click to expand...
Click to collapse
Sorry for the confusion, I used your guide!
I have the solution.
I can bet that when you wiped your phone you didnt just factory reset on twrp you WIPED the whole partition.
So when TWRP made another one it messed up thats why it doesnt work after a reboot.
I am 1000000% sure of this.
So go back to stock then factory reset through STOCK recovery and then install rom and factory reset click the icon on the left not the one on the right that makes you type 'yes'
TWRP doesnt format the partition correctly for our phones.
and the fact that the bootloader is still locked messes things up.
I am 1000000% sure of this.
are you really sure?
j/k, perfect.
TheAxman said:
I am 1000000% sure of this.
are you really sure?
j/k, perfect.
Click to expand...
Click to collapse
yep I am that sure haha.
jetlitheone said:
I have the solution.
I can bet that when you wiped your phone you didnt just factory reset on twrp you WIPED the whole partition.
So when TWRP made another one it messed up thats why it doesnt work after a reboot.
I am 1000000% sure of this.
So go back to stock then factory reset through STOCK recovery and then install rom and factory reset click the icon on the left not the one on the right that makes you type 'yes'
TWRP doesnt format the partition correctly for our phones.
and the fact that the bootloader is still locked messes things up.
Click to expand...
Click to collapse
Your method worked! Thank you very much, I greatly appreciate it.
Is there anyway that i can auto-rotate TWRP ??
Im using TWRP with multirom ..
Unfortunately my digitizer broke and the navigation area is not working.. ( Temporarily i'm managing the phone with full auto-rotation from gravity-box )
MAIN problem is im unable to use the "Swipe to flash" area in TWRP because of the broken digitizer..
I planned to use CWM but im afraid of loosing multirom..
So guys please suggest me about auto-rotation in TWRP or any other alternative idea to flash in MULTIROM..
How do i delete this thread ??
Sidnexus4 said:
How do i delete this thread ??
Click to expand...
Click to collapse
Did u found a solution ?
jithuelad said:
Did u found a solution ?
Click to expand...
Click to collapse
Nope i didnt .. but i dont think TWRP has an auto-rotation.. if at all it existed at-least 1 would have suggested among the 100 views..
Try flashing CWM (non-touch) or PhilZ recovery, they might work for you... they use the Vol and Power buttons to perform recovery functions. It is simple to install or switch even if the screen is not working, you can do it through fastboot with a single command...
fastboot flash recovery cwmrecoveryimage.img
of course, substitute the actual recovery image file name.
EDIT: Nevermind... I didn't see you were using MultiROM until it was too late, I should probably read more thoroughly before replying.
acejavelin said:
EDIT: Nevermind... I didn't see you were using MultiROM until it was too late, I should probably read more thoroughly before replying.
Click to expand...
Click to collapse
No worry's bro.. i already did that. I wasn't able to control my self with out flashing Android L
By the way i have a question for u..
After every thing is back to normal can i just flash TWRP and multiROM directly with out any wipes and resets?
Sidnexus4 said:
No worry's bro.. i already did that. I wasn't able to control my self with out flashing Android L
By the way i have a question for u..
After every thing is back to normal can i just flash TWRP and multiROM directly with out any wipes and resets?
Click to expand...
Click to collapse
Honestly don't know... Never used multirom.
use the sideload option!
Anyone able to create a restart menu that can restart to recovery? Have tried to do a few instructions but run into areas that do not match and it gets quite confusing for me. So anyone can assist would be great. I have a SM-T550
bobfrantic said:
Anyone able to create a restart menu that can restart to recovery? Have tried to do a few instructions but run into areas that do not match and it gets quite confusing for me. So anyone can assist would be great. I have a SM-T550
Click to expand...
Click to collapse
Did you get any PMs or figure anything out, other than Xposed and Gravitybox. That's how I get an extended reboot menus like you get in CM builds.
glockman4519 said:
Did you get any PMs or figure anything out, other than Xposed and Gravitybox. That's how I get an extended reboot menus like you get in CM builds.
Click to expand...
Click to collapse
Haven't received any information at all. I did attempt to do it from this Post but failed for some reason and my tablet wouldn't boot, just stuck on logo. Not thought of xposed module at all because I would think it would act as a third party app. Those do not get along well with the TWRP 3.0.2-1 recovery by @ashyx. If you use 3rd party app to reboot to recovery with that version, you'll be stuck in recovery and not be able to boot to system until you reinstall the recovery with same instructions as first time you install it.
bobfrantic said:
Haven't received any information at all. I did attempt to do it from this Post but failed for some reason and my tablet wouldn't boot, just stuck on logo. Not thought of xposed module at all because I would think it would act as a third party app. Those do not get along well with the TWRP 3.0.2-1 recovery by @ashyx. If you use 3rd party app to reboot to recovery with that version, you'll be stuck in recovery and not be able to boot to system until you reinstall the recovery with same instructions as first time you install it.
Click to expand...
Click to collapse
I'm using TWRP 2.8.7.0 by @ashyx and I use the reboot function in Gravitybox and it is working just fine for me with no bootloops. I will look into how to add the reboot function into the rom and see if I come up with anything and if I do, I will be sure to let you know.
I tried @ashyx 2.8.7 twrp but touches were way out of line so had to go back to 3.0.2 recovery. I think it has to do with the MM 6.0.1 firmware.
Sent from my S4 via NSA wifi
glockman4519 said:
I'm using TWRP 2.8.7.0 by @ashyx and I use the reboot function in Gravitybox and it is working just fine for me with no bootloops. I will look into how to add the reboot function into the rom and see if I come up with anything and if I do, I will be sure to let you know.
Click to expand...
Click to collapse
By the wy what tab you have? What firmware also?
Sent from my S4 via NSA wifi
bobfrantic said:
By the wy what tab you have? What firmware also?
Click to expand...
Click to collapse
I have the t350 and am on my rom 6.0.1 latest firmware release. I forgot that yours is a different dsvice and may not function ghe same as mine.
glockman4519 said:
I have the t350 and am on my rom 6.0.1 latest firmware release. I forgot that yours is a different dsvice and may not function ghe same as mine.
Click to expand...
Click to collapse
yea that may be the reason the 2.8.7 doesn't like my tab being it's T550. you should make your rom work on the 550 hehehe
bobfrantic said:
yea that may be the reason the 2.8.7 doesn't like my tab being it's T550. you should make your rom work on the 550 hehehe
Click to expand...
Click to collapse
If I had that device for testing I would. I would hate to make something that would screw up someone's device. If its mine, I dont care but not on someone else's.
If it is rooted, give this a try.
https://play.google.com/store/apps/details?id=simple.reboot.com
hectorbls said:
If it is rooted, give this a try.
https://play.google.com/store/apps/details?id=simple.reboot.com
Click to expand...
Click to collapse
I use Simple Reboot for now. Still holding out hope someone can make a restart menu. :cyclops:
A+ for simple reboot, been using it on a few different androids and no problems.
Well I have no problem flashing stock rom back, but everytime I flash TWRP it seems to just want to go in a bootloop. I have G928R4 USC on 7.0, every time I restart the phone it just bootloops. I can access TWRP but when I reboot it pulls that crap -_- Please help. Thank you
Tokumei no said:
Well I have no problem flashing stock rom back, but everytime I flash TWRP it seems to just want to go in a bootloop. I have G928R4 USC on 7.0, every time I restart the phone it just bootloops. I can access TWRP but when I reboot it pulls that crap -_- Please help. Thank you
Click to expand...
Click to collapse
You use the latest twrp??
dizio said:
You use the latest twrp??
Click to expand...
Click to collapse
Yes on the latest twrp. Idk what the issue is.
Would it be because I'm on 7.0? Idk if that's a thing but I would assume it wouldn't be the case.
https://twrp.me/devices/samsunggalaxys6edgeplus.html
Are you using the one for your device from here?
There are 2 variants of the SM-G928R4
kdogguk said:
https://twrp.me/devices/samsunggalaxys6edgeplus.html
Are you using the one for your device from here?
There are 2 variants of the SM-G928R4
Click to expand...
Click to collapse
Yes I'm sure I'm using the right one for my device. I have never had this issue before.
Went back to twrp 3.0.2.0 and it's fine, I guess it was just the latest release that was the issue.
Wu
Root
Tokumei no said:
Well I have no problem flashing stock rom back, but everytime I flash TWRP it seems to just want to go in a bootloop. I have G928R4 USC on 7.0, every time I restart the phone it just bootloops. I can access TWRP but when I reboot it pulls that crap -_- Please help. Thank you
Click to expand...
Click to collapse
Root it first
unbelievable i did a hard reset , then clear cache , before was random reboot , now it became worse and constant boot loop ,does replugging the battery solve this issue ?
Hi guys,
Anybody tried the usual Magisk Patch procedure for Android 10? Does it work? Is it stable?
yes tried..
working fine..
but phone is rebooting by itself every now and then.
Speedyix said:
yes tried..
working fine..
but phone is rebooting by itself every now and then.
Click to expand...
Click to collapse
Watch this video full video root and how to fix the bootloop
redymedan said:
Watch this video full video root and how to fix the bootloop
Click to expand...
Click to collapse
tried this thing many times..
but thing is phone facing random reboots not the boot loop.
Random reboots
same with me, random frequent reboot with Android 10 & magisk. Flashed without magisk working fine but missing root access.
Speedyix said:
tried this thing many times..
but thing is phone facing random reboots not the boot loop.
Click to expand...
Click to collapse
tanweer17 said:
same with me, random frequent reboot with Android 10 & magisk. Flashed without magisk working fine but missing root access.
Click to expand...
Click to collapse
exactly..
I guess we have to wait for TWRP recovery (Android 10 patched).
TWRP Root for Android 10 BTC6 Firmware https://forum.xda-developers.com/ga.../unofficial-twrp-3-3-1-0-galaxy-m30s-t4035019