Database Users

Huawei Honor 6 Plus (TL10) B334 Lollipop Firmware [Russia]

Firmware Details
Device: Huawei Honor 6 Plus
Model: Pine-TL10
Android: v5.1.1 Lollipop
EMUI: 3.1
Firmware: B334
Build: PE-TL10C900B334
Code: 05012WEU
Status: Official (stable)
Region: Europe
Country: Russia
Type: Full firmware image
Release Date: 22.12.2015
File Name: PE-TL10_C900B334_Firmware_Russian Federation_Channel-Others_Android 5.1.1_EMUI 3.1_05012WEU.zip
Link
How to Install
As far as this firmware’s compatibility is concerned, you can install it over a wide range of builds that carry C900 market number.
Download “PE-TL10_C900B334_Firmware….05012WEU.zip” from the aforementioned link and extract it.
Copy the extracted ‘dload’ folder to the top directory level of your phone’s external microSD card.
Disconnect the USB cable and open Updater app.
Tap menu > Local Update. Choose the full Update.app package and flash it.
Alternatively, simply reboot the device while holding Vol up + Vol down + Power simultaneously after the copying ‘dload’.

@linus2014 Thanks , What is difference between the B324 and B334 that this new version brings improvements?

PeKeT said:
@linus2014 Thanks , What is difference between the B324 and B334 that this new version brings improvements?
Click to expand...
Click to collapse
I do not have to test the device, obviously there is something new

Has anyone tried the new ROM the B334? I can say that changes have? thanks.

All Problem Solved
i have just finished updating now to this rom and as far as i check all problem in previous lolliopop rom are solved now (DT2W, choose which sim work as 3G or 4G, Gloves mode and all motion options are back) now i can enjoy lollipop till android M :laugh::laugh::laugh:

Perfect

i installed but i missed touch plus

Nobody can answer my question? Which brings changes in this new version B324 B334? someone can tell me the changes one by one? Thanks and sorry for bothering me should know that there are changes

I'm trying to install this firmware but get the following error right at the beginning of installation process:
Software install failed!
Get online help from: emui.com /emotiondownload.php?mod=restore (the link was changed as I'm unable to post the full one)
Press powerkey to continue
The device's info is:
PE-UL00
Android 4.4.2
Build number PE-UL00V100R001CHNC00B200
How can this be resolved? Can I install this firmware on my device?
Thanks.

ykun said:
I'm trying to install this firmware but get the following error right at the beginning of installation process:
Software install failed!
Get online help from: emui.com /emotiondownload.php?mod=restore (the link was changed as I'm unable to post the full one)
Press powerkey to continue
The device's info is:
PE-UL100
Android 4.4.2
Build number PE-UL00V100R001CHNC00B200
How can this be resolved? Can I install this firmware on my device?
Thanks.
Click to expand...
Click to collapse
The firmware is for this model:
Device: Huawei Honor 6 Plus
Model: Pine-TL10

Nice, where did you find this ROM?

carlthedroid said:
Nice, where did you find this ROM?
Click to expand...
Click to collapse
in certain Web sites:good:

linus2014 said:
in certain Web sites:good:
Click to expand...
Click to collapse
Can I flash it over 4.4.2 ?
downloading is very slow ..
BTW here is brand new ROM released on first this year ..
http://www.emui.com/plugin.php?id=hwdownload&mod=detail&mid=125

XDADEVX said:
Can I flash it over 4.4.2 ?
downloading is very slow ..
BTW here is brand new ROM released on first this year ..
http://www.emui.com/plugin.php?id=hwdownload&mod=detail&mid=125
Click to expand...
Click to collapse
if the model of the device corresponds to yours. Make sure it is a full firmware.
P.S the parentheses it says Android 5.1.1 ,I do not know if you can flash it on 4.4.2.

linus2014 said:
if the model of the device corresponds to yours. Make sure it is a full firmware.
P.S the parentheses it says Android 5.1.1 ,I do not know if you can flash it on 4.4.2.
Click to expand...
Click to collapse
yes it does corresponds
EDIT : cannot flash .. straight it will fail..
Edit 2 : I need B324 first ...

linus2014 said:
if the model of the device corresponds to yours. Make sure it is a full firmware.
P.S the parentheses it says Android 5.1.1 ,I do not know if you can flash it on 4.4.2.
Click to expand...
Click to collapse
weird it won't let me up .. to that latest.. only to 324 looks like it is for china only.. am in UK.. might try yours..

XDADEVX said:
weird it won't let me up .. to that latest.. only to 324 looks like it is for china only.. am in UK.. might try yours..
Click to expand...
Click to collapse
you must to have at least lollipop 5.1.1, do not know more.

linus2014 said:
you must to have at least lollipop 5.1.1, do not know more.
Click to expand...
Click to collapse
yes i said i have now 324

PeKeT said:
Has anyone tried the new ROM the B334? I can say that changes have? thanks.
Click to expand...
Click to collapse
Installed without Problem on My PE TL10
Changelog :
- motion control is back
- new bootanimation (red H)
- minor fixes ?

Huifei RK3188 lost Bootloader

Hi everyone,
I just bought one head unit Huifei RK3188 for Audi A4 with canbus, and after intalled the last rom from Malaysk I made something wrong because now I can´t see the bootloader, or go to recovery mode. Tried to install recovery from TWRP and CWM and nothing hapends.
Tried to reinstall a fresh "update.img" from rockchip tool batch 1.7 and it says " download IDB failed".
Tried to search for the NAND to make maskmode but I don't know what is the chip.
Can anybody help me?
Many thanks
eexray

Same here. It came with the latest Malaysk ROM.
Could it be that Malay forgot to include the bootloader?

Can anybody, who updated to the latest Malaysk ROM, confirm that the bootloader is still there? I just would like to know if we did something wrong or if the bootloader is really missing in this ROM. Thanks!

Up.

Ill check if you tell me what I'm looking for.

Same here, after update black screen. No logos at all, like there is no bootloader. I can't even get into recovery with the mathod that was working previously.

dir3ctor said:
Same here, after update black screen. No logos at all, like there is no bootloader. I can't even get into recovery with the mathod that was working previously.
Click to expand...
Click to collapse
Still the same, the unit works but with some problems like no recovery, bootloader, when press eject of dvd the screen goes to black, when using the BT call the screen goes to black, reverse camera too....

Hi !
I was just about to install the latest Malaysk ROM "update_4_4_4_FUSE_1024X600_RK3188_16_MAL_17_03_2016" and now I see this post. Is there a risk for me to have the same problem as you guys with this one ?
When you guys say "the latest ROM", I see it's in January - the one I downloaded is from March 17th. Can anyone confirm this has been fixed and I'm not risking to loose bootloader and recovery access ?

monkoid said:
Hi !
I was just about to install the latest Malaysk ROM "update_4_4_4_FUSE_1024X600_RK3188_16_MAL_17_03_2016" and now I see this post. Is there a risk for me to have the same problem as you guys with this one ?
When you guys say "the latest ROM", I see it's in January - the one I downloaded is from March 17th. Can anyone confirm this has been fixed and I'm not risking to loose bootloader and recovery access ?
Click to expand...
Click to collapse
Nevermind. I installed it - no issue to report.

My headunit has lost recovery after malaysk ROM
Hello, I have the same problem. Recovery is a blank screen, the os us also a black screen. Everything working fine then flashed malaysk rom. Interested to hear what I can do.

OK.... I've bricked my unit - totally my fault. I had MCU version MTCD and Malaysk roms are for MTCB.
I tried hundreds of resurrection methods and nothing worked for me. Now waiting for support from seller...

Same deal here.. Bricked the unit. No fix as yet.
Sent from my SM-G928F using Tapatalk

dir3ctor said:
OK.... I've bricked my unit - totally my fault. I had MCU version MTCD and Malaysk roms are for MTCB.
I tried hundreds of resurrection methods and nothing worked for me. Now waiting for support from seller...
Click to expand...
Click to collapse
Did you get anywhere with this?
Sent from my SM-G928F using Tapatalk

same here Xtrons TD101A
In my case it is LED back light turns off.
And I try to play dvd then LED back light turns off too,

also at me the same black screen does not enter recivero .
help me thanks

satjoker said:
also at me the same black screen does not enter recivero .
help me thanks
Click to expand...
Click to collapse
Reflash MCU file and slove it.
I guess that your issue are same like this.
http://forum.xda-developers.com/showpost.php?p=66415327&postcount=3139

as I do not return in recovery mode
Inviato dal mio SM-G925F utilizzando Tapatalk

Did someone manage to fix the black screen? Maybe via adb?
Sent from my SM-N910F using XDA-Developers mobile app

Don't think so. I returned the unit.
Sent from my SM-G928F using Tapatalk

eexray said:
Hi everyone,
I just bought one head unit Huifei RK3188 for Audi A4 with canbus, and after intalled the last rom from Malaysk I made something wrong because now I can´t see the bootloader, or go to recovery mode. Tried to install recovery from TWRP and CWM and nothing hapends.
Tried to reinstall a fresh "update.img" from rockchip tool batch 1.7 and it says " download IDB failed".
Tried to search for the NAND to make maskmode but I don't know what is the chip.
Can anybody help me?
Many thanks
eexray
Click to expand...
Click to collapse
I had exactly the same problem. Tried to install an update.img using Rockchip Factory Toolkit v1.39 and got the same " download IDB failed" However, I tried a different usb port on my pc and it worked !! I suggest you persevere and try differnet ports/ different cables because it can be fixed.....

Tanix TX2 RK3229 firmware needed

Helo, I'm looking for any firmware for my Tanix TX2 tv box. It's based on Rockchip RK3229. Android show only product.model=rk322x
On PCB i found this description CS_3229MX9_V1.0 2016-03-26

hello
I also bought a TX2-R2 a few days ago.
Is there maybe a custom firmware that works better than the originale one?
Or can i use every Firmware based on the RK3229 2GB/16GB?
SajetS

SajetS said:
hello
I also bought a TX2-R2 a few days ago.
Is there maybe a custom firmware that works better than the originale one?
Or can i use every Firmware based on the RK3229 2GB/16GB?
SajetS
Click to expand...
Click to collapse
Same here, this box has enough power for Android 7.0 any help would be great.
THX

In the same boat with previous posters.
Could be a really nice box when someone could help to get Android 7.0 on it.

matu04 said:
In the same boat with previous posters.
Could be a really nice box when someone could help to get Android 7.0 on it.
Click to expand...
Click to collapse
Hi, Tanix just release it.
Thanks @javimetal on Freaktab forum
http://www.tanix-box.com/download-view/tanix-tx2-firmware-full-image-1-16-2-16-20170608/

tx2
manu_manu4 said:
Hi, Tanix just release it.
Thanks @javimetal on Freaktab forum
http://www.tanix-box.com/download-view/tanix-tx2-firmware-full-image-1-16-2-16-20170608/
Click to expand...
Click to collapse
would be a good release if it worked.....

Doesn't work. Gets stuck at boot logo..

mariosm1cy said:
Doesn't work. Gets stuck at boot logo..
Click to expand...
Click to collapse
Same here .....

this is the response i got form tanix via skype regarding failed nougat rom flash:
[01:14:02 PM] Tanix Box: Some TX2 are OEM
[01:14:15 PM] Tanix Box: traders can change components if they buy certain quantity
I replied the following, they did not reply after that
[02:07:47 PM] : well the marshmallow firmware was flashed successfully right after the failed nougat rom

mariosm1cy said:
this is the response i got form tanix via skype regarding failed nougat rom flash:
[01:14:02 PM] Tanix Box: Some TX2 are OEM
[01:14:15 PM] Tanix Box: traders can change components if they buy certain quantity
I replied the following, they did not reply after that
[02:07:47 PM] : well the marshmallow firmware was flashed successfully right after the failed nougat rom
Click to expand...
Click to collapse
So they are saying you need to change components to flash nougat?

They are full of s**t. If that was true then i would not be able to flash marshmallow back which i downloaded in the past from their webpage.

Very true . Just not sure why it won't boot as says it has flashed successfully.

I saw some posts that 7.1 works with the new burning tool v2.42. havent tried it yet though.

That would be interesting to find out . Didn't know there was a new tool .

fridaycider said:
would be a good release if it worked.....
Click to expand...
Click to collapse
It works for me using the AndroidTool_release_2.42 (before I tried RK batch tool but "boot loop".

Reimix said:
It works for me using the AndroidTool_release_2.42 (before I tried RK batch tool but "boot loop".
Click to expand...
Click to collapse
Thanks for testing and providing feedback.

Reimix said:
It works for me using the AndroidTool_release_2.42 (before I tried RK batch tool but "boot loop".
Click to expand...
Click to collapse
how is it? (faster/slower) any obvious bugs?

mariosm1cy said:
how is it? (faster/slower) any obvious bugs?
Click to expand...
Click to collapse
It`s working fine, fast and no apparents bugs( except built-in browser that stops aleatory). The interface still the same, but without status bar and base bottoms

Joying JY-JM001N2 - MCU Update Message

Hi, I searched around but was unable to locate a member with a similar problem.
Issue:
- I applied the Joying 01 March, 2018 firmware to my JY-JM001N2. MCU version is 5.25 800*480
- All seemed to go fine, head unit rebooted
- When the unit started I get an MCU update screen. The top is green with a MCU and some Chinese writing which I do not understand
Has anyone experienced this and have tips or tricks they can pass along?
Many thanks,
Dan

if everything work, and u just need to hide this message u can use the sofia xposed module

danomite01 said:
Hi, I searched around but was unable to locate a member with a similar problem.
Issue:
- I applied the Joying 01 March, 2018 firmware to my JY-JM001N2. MCU version is 5.25 800*480
- All seemed to go fine, head unit rebooted
- When the unit started I get an MCU update screen. The top is green with a MCU and some Chinese writing which I do not understand
Has anyone experienced this and have tips or tricks they can pass along?
Click to expand...
Click to collapse
As you are on the stock joying ROM, you probably downloaded the wrong firmware. Did you download the 1024x600 version or the 800x480 version?

surfer63 said:
As you are on the stock joying ROM, you probably downloaded the wrong firmware. Did you download the 1024x600 version or the 800x480 version?
Click to expand...
Click to collapse
Yeah, initially I thought I applied the wrong one. I downloaded it from Joying again and applied with the same issue.
Firmware - 01 March, 2018
MCU: 5.25
Resolution: 800*480
drive.google.com/file/d/1SiHcRPihrfQzxrkRy5qe0EEAjegQJ-0M/view
Interesting, I have two Joying head units, one JY-JL001N2 and a JY-JM001N2. Both use the same firmware and the JL took fine whereas the JM has the issue. I sent an email to Joying because I just got the JM and the Zlink wasn't working right. I wanted to reapply the latest firmware to see if it'll help but just caused the MCU issue. They replied asking for the download link, I suspect they're checking if I applied the wrong one.
I successfully applied an older firmware from around August 2017, no more message but the radio and sound is all messed up. I then reapplied the latest firmware with the same MCU message.
Thanks!

RoNeReR said:
if everything work, and u just need to hide this message u can use the sofia xposed module
Click to expand...
Click to collapse
Thanks, I'll give it a shot!

Well, I ended up using an old firmware from around August 2017 and the MCU message went away. I then installed the latest March 2018 update and it finally took. I’m posting this follow up so if someone else has a similar issue they can give this a go.
Joying support wasn’t very helpful although they do reply quickly. I think they should just have an auto reply email saying “do a factory reset” as this is basically all the advice they seem to give.

Hi,
Having same problem with you. Can I have link to download 2017 firmware.

Android Head Unit Identification MCU ZHAN(NOR)

Hello,
i buyed a Taffio S200 Android Radio for my Opel Astra J with an Octa Core PX5 2GB Ram and 32Gb
Can anyone tell me how i come into the Recovery Mode? The Radio havn't any Buttons, only a small Reset Button. I tryed it with Terminal Emulator but it's rebooting i see a little bit like Recovery Menu but than it's rebooting again to Android.
I search a Custom Rom too, but i only read about MTCD and MTCE but my device shows MCU version: 2018-04-16 17:04:06 ZHAN_(NOR)_90_C9RD6686_CAN(A)PX5D1804160.
I couldn't find anything about this mcu.
Have anyone an idea how to root this device? I can't try a lot of things, because i can't restore a brick without Recovery Menu and stockrom.

Does your HU have a USB port? If so, plug in a USB keyboard, reboot/reset the device and try pressing Alt + Print Screen while tapping i or e (both works)

MADNESSSsss said:
Does your HU have a USB port? If so, plug in a USB keyboard, reboot/reset the device and try pressing Alt + Print Screen while tapping i or e (both works)
Click to expand...
Click to collapse
Yes, but it warmed up the device, it shows a countdown of 5 seconds but then it starts normally.

DennisBa said:
Yes, but it warmed up the device, it shows a countdown of 5 seconds but then it starts normally.
Click to expand...
Click to collapse
Have you tried enabling adb over Wifi on the device using https://hvdwolf.github.io/Joying-RootAssistant/ (or even rooting ~ some risk is there, so try the adb method first) and using an adb command to reboot to recovery?

MADNESSSsss said:
Have you tried enabling adb over Wifi on the device using (or even rooting ~ some risk is there, so try the adb method first) and using an adb command to reboot to recovery?
Click to expand...
Click to collapse
Yes i tried this too, but the same. I have destroyed my Firmware but i dont know where i became the Stock Rom for this Device. so i flashed the Joying Android 8 Stock Rom. and it works but not the Recovery. The same Problem. I have root but only semi rooted.

DennisBa said:
Yes i tried this too, but the same. I have destroyed my Firmware but i dont know where i became the Stock Rom for this Device. so i flashed the Joying Android 8 Stock Rom. and it works but not the Recovery. The same Problem. I have root but only semi rooted.
Click to expand...
Click to collapse
The Joying Root Assistant didn't work for you to root the device?
Some firmwares lock you out of the recovery menu, where it can be only used for updating your firmware. Maybe that's why?

DennisBa said:
Yes i tried this too, but the same. I have destroyed my Firmware but i dont know where i became the Stock Rom for this Device. so i flashed the Joying Android 8 Stock Rom. and it works but not the Recovery. The same Problem. I have root but only semi rooted.
Click to expand...
Click to collapse
Your unit is a WINCA/ROADNAV manufactured S200 and it can be rooted. I know because I have exactly the same MCU firmware and probably the same Android build. Check out the rooting thread on the first page of this forum. In there is all the info you need.

DennisBa said:
Yes i tried this too, but the same. I have destroyed my Firmware but i dont know where i became the Stock Rom for this Device. so i flashed the Joying Android 8 Stock Rom. and it works but not the Recovery. The same Problem. I have root but only semi rooted.
Click to expand...
Click to collapse
after updating the commands on the steering wheel still work?
looxonline said:
Your unit is a WINCA/ROADNAV manufactured S200 and it can be rooted. I know because I have exactly the same MCU firmware and probably the same Android build. Check out the rooting thread on the first page of this forum. In there is all the info you need.
Click to expand...
Click to collapse
Would you backup your stock rom?
after installing the joyng android 8.0 my controls on the steering wheel have stopped. I would like to install the stock again.

eduardofluh said:
after updating the commands on the steering wheel still work?
Would you backup your stock rom?
after installing the joyng android 8.0 my controls on the steering wheel have stopped. I would like to install the stock again.
Click to expand...
Click to collapse
I could but my stock ROM will most likely not work properly on your unit. Each ROM differs slightly from car to car with the WINCA units. It's daft but it's how they chose to design.

looxonline said:
I could but my stock ROM will most likely not work properly on your unit. Each ROM differs slightly from car to car with the WINCA units. It's daft but it's how they chose to design.
Click to expand...
Click to collapse
You are my last hope. The controls on the steering wheel do not work, not even the Parking Sensor. If it goes wrong, nothing will change. Could you backup and send me? I would be very grateful.

eduardofluh said:
You are my last hope. The controls on the steering wheel do not work, not even the Parking Sensor. If it goes wrong, nothing will change. Could you backup and send me? I would be very grateful.
Click to expand...
Click to collapse
Please send me the link to where you purchased your unit as well as all you know about the manufacturer.

Mine too is ZHAN_(NOR) i bought it in Polish Reseller, original seller is bluepowercn.com, the name of the unit is GREATSO S200. Cannot find in Russian Forums and XDA any information about that ROM or UPDATES/MODS. Alie Store:
Bluepower Electronics co., ltd
youtube.com/watch?v=AEvCX2bomoA - info from Witson with same MCU, Ok Found mine it`s: W2-W279
Is it possible to upgarade or install mod rom to W2-W279? I have some issues with OBD2 connection via Bluetooth and Bluetotoh contacts storage plus minor bugs... cannot find on XDA if ZHAN_(NOR) is possible to upgrade or change of the stock rom.
DennisBa unit is W2-W072 - Opel Astra J - i think its the same brand and topic is consistent.

Olá,
Como faço atualização desde modelo MCU ZHAN_(nor)_90_C9RD 7786 CAN(A)D1801311
Muito obrigado!.

DennisBa said:
Hello,
i buyed a Taffio S200 Android Radio for my Opel Astra J with an Octa Core PX5 2GB Ram and 32Gb
Can anyone tell me how i come into the Recovery Mode? The Radio havn't any Buttons, only a small Reset Button. I tryed it with Terminal Emulator but it's rebooting i see a little bit like Recovery Menu but than it's rebooting again to Android.
I search a Custom Rom too, but i only read about MTCD and MTCE but my device shows MCU version: 2018-04-16 17:04:06 ZHAN_(NOR)_90_C9RD6686_CAN(A)PX5D1804160.
I couldn't find anything about this mcu.
Have anyone an idea how to root this device? I can't try a lot of things, because i can't restore a brick without Recovery Menu and stockrom.
Click to expand...
Click to collapse
Hi, my car is a Opel Astra J, too and I need to reflash the MCU. I flashed the wrong one... Can you share your MCU maybe? Thank you!

Or maybe someone could share this firmware to me like in the pictures? After flashing wrong MCU and newer system version, my Canbus Box and car won't be detected anymore.
I need this firmware with ZHAN(NOR) MCU (for Opel Astra J).
Anyone who can help me?

Please check out my own thread here:
Winca/Roadnav S200 PX5 ZHAN_(NOR) MCU & firmware (Opel Astra J)
Hi guys. Maybe and hopefully someone of you can help me here. I bought a used Android system based on the Winca S200 with ZHAN_(NOR) MCU for the Opel Astra J. While looking for new system software I stupidly flashed a newer system version, but...
forum.xda-developers.com
If anyone has a dump/backup of this firmware and mcu, please let me know.
Big thanks in advance.

Good morning..
I ask for your help.
Few years ago
I bought an Android radio, unfortunately I don't know what it is.
Today I need to update it if possible, but I don't understand what model it is.
I enclose any useful information, grateful if you can help me.
thank you all