Hi All
I bought a Kunfine head Unit and a aftermarket reverse camera. I hooked up the reverse camera to the reverse light and ran the cable to my Kunfine android 10 head-unit. My Head-unit does not have a dedicated reverse camera Socket for my RCA cable coming from the reverse camera. So I plugged it in to the CCVB and i got an Image, but i have to select AUX on my head unit to see the image from my reverse camera. The unit also dont have a dedicated wire to fit to the reverse trigger wire. Can anyone tell me what i must do in order for the reverse image to come up on my android unit as soon as i put my car into reverse. There are no "back" or "reverse" wires on my head-unit canbus... Please help. I will really appreciate it.
Thanks
Start the Chrome app and navigate to the web page with the image you want to search with.
Tap and hold the image until a pop-up menu appears.
Tap "Search Google for this image."
After a moment, you'll see the search results for this image.
This will help you!!
GeorgiaHarris said:
Start the Chrome app and navigate to the web page with the image you want to search with.
Tap and hold the image until a pop-up menu appears.
Tap "Search Google for this image."
After a moment, you'll see the search results for this image.
This will help you!!
Click to expand...
Click to collapse
I AM ON A PC
Peet13 said:
I AM ON A PC
Click to expand...
Click to collapse
Here are some threads that might help
Search results for query: T3l
forum.xda-developers.com
Related
Hello everyone i just registered cause i need your help
I havea mustang 2016 tesla screen it was working well
Then yesterday i could not press any button like change mode or change wheel mode or traction off or even ac off/on
The touch is working well except those buttons
I need your help guys and if you need any information just ask me
Hmo0odh said:
Hello everyone i just registered cause i need your help
I havea mustang 2016 tesla screen it was working well
Then yesterday i could not press any button like change mode or change wheel mode or traction off or even ac off/on
The touch is working well except those buttons
I need your help guys and if you need any information just ask me
Click to expand...
Click to collapse
I'm actually the person who brought the 2015+ Mustang Tesla-Style units en masse.
To fix your issue, try going to Settings > Advanced Settings > and try the code 8861. Once you're in there, you'll see "Mustang Hi" and "Mustang Low." Whichever one is selected, pick the other one, then shut off your car, open the door, and re-start. If it's still not working, go back in and select the one it was on previously and reboot again. (Be sure to open and close car door after shutting car off.)
If that doesn't fix the issue, ensure the cables that connect to the bottom of the screen are connected in the back. If they're connected, then you have a bad "HVAC Board" as they call it.
There's an entire thread dedicated to it here:
https://www.mustang6g.com/forums/showthread.php?t=75984
PatrickHenninger said:
I'm actually the person who brought the 2015+ Mustang Tesla-Style units en masse.
To fix your issue, try going to Settings > Advanced Settings > and try the code 8861. Once you're in there, you'll see "Mustang Hi" and "Mustang Low." Whichever one is selected, pick the other one, then shut off your car, open the door, and re-start. If it's still not working, go back in and select the one it was on previously and reboot again. (Be sure to open and close car door after shutting car off.)
If that doesn't fix the issue, ensure the cables that connect to the bottom of the screen are connected in the back. If they're connected, then you have a bad "HVAC Board" as they call it.
Click to expand...
Click to collapse
Thank you for your quick reply
Actually I tried to change from mustang hi to low and the opposite it didn't fixed but I will try the rest of solutions and reply again
Back up camera
Hey all I just installed the Tesla mustang s550 unit. Everything works except the rear camera. I thought it was just plug and play and I’m sure I connected the right camera wires together. However when I put it in reverse it says that there’s no input. Did I miss-connect it? I plugged the camera input wire into the factory camera view wire, they are both yellow. Is it supposed to go elsewhere???
Thisistaha said:
Hey all I just installed the Tesla mustang s550 unit. Everything works except the rear camera. I thought it was just plug and play and I’m sure I connected the right camera wires together. However when I put it in reverse it says that there’s no input. Did I miss-connect it? I plugged the camera input wire into the factory camera view wire, they are both yellow. Is it supposed to go elsewhere???
Click to expand...
Click to collapse
Do you have the male yellow RCA cable connected to the female yellow RCA cable?
"Toggle switches not working"
I thought my toggles switches weren't working, but it was just user error. I was pushing down on the toggles switches, put you need to lift them up until you hear the click. Hope this helps someone else, just as dumb as me.
Hi all
Bought an RCA front camera as I was hoping I could use the f-cam app to get front and rear camera views and to get the front camera on for 10 seconds after reverse as per the option for the front camera in the factory settings.
So had a pig of an afternoon running the cables and what not but the only way I get the front cam view on display is by the AVIn app which isn’t ideal as it kills the radio and also seems to stall and affect the head unit.
Selecting front in the fcam app shows a warning of missing input and if you set it to activate after reverse the same occurs.
It’s strange for the unit that have the option of this function without actually doing it via the video in feed, Do I need another harness for this specifically for cam input??.
Here is the back of my unit. Can’t do the soldering to the board mod, but hoping there’s an easier way considering it’s part of the operating system.
Danno1975 said:
Hi all
Bought an RCA front camera as I was hoping I could use the f-cam app to get front and rear camera views and to get the front camera on for 10 seconds after reverse as per the option for the front camera in the factory settings.
So had a pig of an afternoon running the cables and what not but the only way I get the front cam view on display is by the AVIn app which isn’t ideal as it kills the radio and also seems to stall and affect the head unit.
Selecting front in the fcam app shows a warning [emoji615]️ of missing input and if you set it to activate after reverse the same occurs.
It’s strange for the unit that have the option of this function without actually doing it via the video in feed, Do I need another harness for this specifically for cam input??.
Here is the back of my unit. Can’t do the soldering to the board mod, but hoping there’s an easier way considering it’s part of the operating system.
Click to expand...
Click to collapse
Isn't the front camera meant to be on usb?
hans.vinkers said:
Isn't the front camera meant to be on usb?
Click to expand...
Click to collapse
Hi, only for dvr, I have that and it’s working well. But it doesn’t work with F-cam
Also noticed today that the rear f cam app is reversed ie left is right, but when reversing the view is correct. Can’t find any settings for the f-cam app.
Danno1975 said:
Hi all
Bought an RCA front camera as I was hoping I could use the f-cam app to get front and rear camera views and to get the front camera on for 10 seconds after reverse as per the option for the front camera in the factory settings.
So had a pig of an afternoon running the cables and what not but the only way I get the front cam view on display is by the AVIn app which isn’t ideal as it kills the radio and also seems to stall and affect the head unit.
Selecting front in the fcam app shows a warning of missing input and if you set it to activate after reverse the same occurs.
It’s strange for the unit that have the option of this function without actually doing it via the video in feed, Do I need another harness for this specifically for cam input??.
Here is the back of my unit. Can’t do the soldering to the board mod, but hoping there’s an easier way considering it’s part of the operating system.
Click to expand...
Click to collapse
Did you connected power to the RCA front camera? I do have a switch on my car to give/cut power to front camera itself.
If I don't power it up I get warning sign as well.
Hello! did you solve this problem? Im having the same issue
I have been spending the last week or two reading nearly everything in these android head unit forums. I have but one suggestion I cannot seem to find anyone who has tried it. I will be testing this method out shortly my self. But have you considered a 4 way video splitter. I have no experience with fcam app btw. Also I would mention that I have spent most of my time trying to find threads or posts of people who have used factory front/rear , 360 cameras for parking assistance. So far most seem to only use back up cameras or front camera for DVR(dashcam). American market brands of these types of splitters are 100-300$ usd aliexpress chinacom versions are 20-50$ I will be buying a china version when I get ready to order parts.
Was a solution ever found to this problem?
I am in same situation.
I have "fcam" app but it only shows reverse picture, can't workout which pins are for front camera so running front camera through AVin ....like above this is not ideal
Did you ever figure this out? Currently dealing with the same scenario.
I sorted it by buying a different head unit.. I now have a brosmartek 8227L and front camera works as it has its own input connection. It holds front camera image for 3, 5 or 8 seconds after forward gear is engaged after reverse
Hi to all,
I have the same problem and I found the solution..
So I found this diagram into the forum (https://forum.xda-developers.com/android-auto/android-head-units/vw-head-unit-android-10-t4132083)
As you can see there is an input for f-cam (No9) but if you see the plug (radio cable) the specific pin have no cable.
You must connect a cable for video with a new cable connected to pin No9 and you must also take the cround from another connection (I took it from No40) and with this two new cables you can creat a new female RCA for the F-Cam..
I hope my solution to help you...
simosk78 said:
Hi to all,
I have the same problem and I found the solution..
So I found this diagram into the forum (https://forum.xda-developers.com/android-auto/android-head-units/vw-head-unit-android-10-t4132083)
As you can see there is an input for f-cam (No9) but if you see the plug (radio cable) the specific pin have no cable.
You must connect a cable for video with a new cable connected to pin No9 and you must also take the cround from another connection (I took it from No40) and with this two new cables you can creat a new female RCA for the F-Cam..
I hope my solution to help you...
Click to expand...
Click to collapse
hello, i am now attempting to do the same , what plug did you use on 9 ? and the one for 40 ground you just took it from slot 40 but where does it go on 9?
Hi There,
I have installed a generic android 10.1 - 2GB (RAM)+32GB (ROM) unit and have an issue with the reverse camera.
When in reverse, screen blanks out but no image.
I have had the unit and the camera replaced and have had 2 experienced installers look at the problem but no fix.
Does anyone have any suggestions to fix the problem?
Also, do you think a 12V DC Kit Power Relay Filter Rectifiers Capacitor may help?
Thanks in advance
Bondibiz said:
Hi There,
I have installed a generic android 10.1 - 2GB (RAM)+32GB (ROM) unit and have an issue with the reverse camera.
When in reverse, screen blanks out but no image.
I have had the unit and the camera replaced and have had 2 experienced installers look at the problem but no fix.
Does anyone have any suggestions to fix the problem?
Also, do you think a 12V DC Kit Power Relay Filter Rectifiers Capacitor may help?
Thanks in advance
Click to expand...
Click to collapse
The radio shows the blank black screen because the radio gets no video signal.
This can be related to 2 different things:
Missing 12V power at the camera.
Measure the cam connection for ground and +12V if your reverse gear is activated.
If there is missing something, you need to follow the cable and check the connections.
The fact that the black screen is shown, tells us that the radio itself is connected correctly.
Wrong CAM-In port used.
Check if you really used the CAM-In and not the Video-In connector
The capacitor is normally not helpful if you don´t get a video signal.
You don´t tell us in your posting how the power is provided to the cam. So that may help for further investigation.
rigattoni said:
The radio shows the blank black screen because the radio gets no video signal.
This can be related to 2 different things:
Missing 12V power at the camera.
Measure the cam connection for ground and +12V if your reverse gear is activated.
If there is missing something, you need to follow the cable and check the connections.
The fact that the black screen is shown, tells us that the radio itself is connected correctly.
Wrong CAM-In port used.
Check if you really used the CAM-In and not the Video-In connector
The capacitor is normally not helpful if you don´t get a video signal.
You don´t tell us in your posting how the power is provided to the cam. So that may help for further investigation.
Click to expand...
Click to collapse
The power to the cam is provided by connecting the positives from the camera to the reverse light positive input and the negative earthed. This is then connected to the android head unit, video input and the reverse cable.
Bondibiz said:
The power to the cam is provided by connecting the positives from the camera to the reverse light positive input and the negative earthed. This is then connected to the android head unit, video input and the reverse cable.
Click to expand...
Click to collapse
Did you check that the Cam is connected to the CAM-IN connector at the unit?
...and did you measure the voltage delivered to the cam?
Which car are you driving? Does it have LED back lights?
Does the cam deliver a picture if you connect it directly to +12V instead of using the back light?
Without measuring, there is no need to answer from your side. This is mandatory to step forward.
i have the same issue. reverse camera show during installation but after few hours no image. only can see the lines. i connect the rca to my tv.it show reverse image .
I already wrote it in another topic. You need to use search instead of a new topic.. I don't know which car and which head unit. I had a VW Golf 6 powered by the reversing light and there was interference, stripes across the image. There are suppressors for powering from the reversing light, also on AliExpress. But the better option is mine. I found a pin on my main unit directly for powering the backup camera, which has 12v when I put it in reverse. It works perfectly, without interference or problems. I have a Can-Bus system. I'll put the pin-out of my unit here. Maybe it will help you.
And what about the black image after putting it in reverse, either there is no 12v power supply for the camera, or the input for the camera is incorrect.. use the cinch Reverse Cam input, do not plug into the cinch Cam-in this it is used for the front camera. Another option is to set the main unit for the backup camera, maybe the system is NTSC and it is set to PAL, or vice versa, depending on where you come from. Another option is to set the input of the backup camera type AHD, and the camera is normal, SD, I I tried the AHD type (better quality) and the picture was black. Inform us.
I got some issued on my android car head unit. No video input, on reserse.
Usinf canbus cable pink for electricity.
Check the video here :
I just put this head unit in but not sure how to wire it up correctly? Is there something I can splice the brake cable onto to make it think it's always on?
You could spice the ACC cable and connect it with the break input of the head unit.
As soon as ignition is on the head unit will get the signal that hand break is active.
Thank you, so I can just attach it to 12v line and it should trick it?
I can sort of get around it with split screen on the left I can double tap the open apps button and it shows like this until I touch it
MikeA3 said:
Thank you, so I can just attach it to 12v line and it should trick it?
Click to expand...
Click to collapse
BREAK is an input and you can connect 12V+ to it without risk.
Hi please, I need help to fix my andriod HU camera. I followed seller guidance to install and wire the device but it does not automatically switch on when I shift to reverse gear. And I had to install an andriod camera from playstore as I could not find any installed camera. When I manually open the camera in reverse, it work but the image starts from my left side instead of the center. The trajectory line appear from left to right. Can someone help? See pictures.
Fazziee said:
but it does not automatically switch on when I shift to reverse gear
Click to expand...
Click to collapse
You need to connect pin G5 on the head units power connector to your reverse light power supply. This triggers the reverse camera to automatically display.
You should uninstall the Android camera app you have downloaded as it isn't needed.
These head units are vertical/portrait by default but have been modified to rotate everything by 90° to operate in horizontal/landscape mode. That's probably why your 3rd party camera app is sideways.
You should be able to view the reverse camera in 1 of the preinstalled apps. Try the app called "AV" or something similar.
Thank you for your response. I apprciate this. But I think I have connected the wires already as you advised. I had one PINK wire labelled BACK and one BROWN wire extending from the power. I connected these two wires to a RED wire extending from the Camera input. So, when I put gear on Reverse and manually open camera, it works but the image is inverted. I have uninstalled the playstore camera but the reverse gear does not trigger the (invisible) in-built camera.
The only pre-installed APP I have that could use a camera is TV. Also I do not have a canbus hency why I joined all wires together. I have also tried using just one wire, the same result. Is there a way I can rotate the camera orientation? I have been frustrated with setting this up. I have tried updating the MCU but no luck with the camera.
Fazziee said:
Hi please, I need help to fix my andriod HU camera. I followed seller guidance to install and wire the device but it does not automatically switch on when I shift to reverse gear. And I had to install an andriod camera from playstore as I could not find any installed camera. When I manually open the camera in reverse, it work but the image starts from my left side instead of the center. The trajectory line appear from left to right. Can someone help? See pictures.
Click to expand...
Click to collapse
Is unit an FYT type? Post Android system information including MCU version
If you have a multimeter check that the wire you connected to pin 5 has 12v when you engage reverse. If it doesn't then it is wired incorrectly.
Yes it does have 12V. I'm thinking it has something to do with the software. Maybe there is no preinstalled camera that is programmed to appear when in reverse and also to remain vertically orientated. I think youbare right that these HUs are setup to open every single apps in horizontal mode and that includes third party camera. Question: Do headunits come with their own camera app? Mine did not come with a default camera software.
marchnz said:
Is unit an FYT type? Post Android system information including MCU version
Click to expand...
Click to collapse
Device name: ums512_1h10_Natv
Andriod version: 12
MCU version: TS10.2.2_20230210.093416
Fazziee said:
Device name: ums512_1h10_Natv
Andriod version: 12
MCU version: TS10.2.2_20230210.093416
Click to expand...
Click to collapse
Not an FYT unit, requested moderator moves to Android Head-Units forum.