i have a laptope but i want to know how to connect my 2nd monitor to the laptope through hdmi my laptope have curropt windows so when i connect hdmi my laptop get stuck and i want to comnect my laptope to 2nd monitor from start when we start a laptope...so any body can help me?
Related
Hi I have a xenarc car-audio device (touch screen monitor, rca/dvi/vga inputs, line in from pc, USB out to connect to pc 4 touch input).
Instead of buying a small pc and place it somewhere in the trunk with loads of cables, I could use the audio/video out from the SGS and stick with it.
The problem is... I'd like to use the touch screen on the xenarc! So, is there a way to put the phone in host mode and connect the touch screen? Or simply connect an external mouse? What would I need, I mean, would I need to code the driver myself or the feature is already present in the os?
Thanks
I am using cat5 cable running from PS3 ( Playstation ) going straight to my modem/switch/router ( all-in-one). I have cut the cable casing in the middle and re-wired through my 2 keystone jacks.
The is no problem with the PS3 it connects to the internet fine, I even CUT the brown and blue cables.
The problem is my monitor computer when i plug in the monitor ethernet cable wont connect it says " ACTIVATION OF NETWORK FAILED "
Even in Wireshark i cannot see any interface.
I am only using 1 ethernet cable because i dont care about capturing both traffic just one way i want to test.
I have tried to put my eth0 up in promisc but still not connecting and still not showing any interface in wireshark.
Can anyone help me in any way ? Why is my computer not connecting to the tap and why is no interface showing in wireshark
immanual-kant said:
I am using cat5 cable running from PS3 ( Playstation ) going straight to my modem/switch/router ( all-in-one). I have cut the cable casing in the middle and re-wired through my 2 keystone jacks.
The is no problem with the PS3 it connects to the internet fine, I even CUT the brown and blue cables.
The problem is my monitor computer when i plug in the monitor ethernet cable wont connect it says " ACTIVATION OF NETWORK FAILED "
Even in Wireshark i cannot see any interface.
I am only using 1 ethernet cable because i dont care about capturing both traffic just one way i want to test.
I have tried to put my eth0 up in promisc but still not connecting and still not showing any interface in wireshark.
Can anyone help me in any way ? Why is my computer not connecting to the tap and why is no interface showing in wireshark
Click to expand...
Click to collapse
from the picture it doesnt lookm like you punched the wires down the best way to do this is with a tool but it is possible to do with a flat head screwdriver but to protect bandwith/ ip conflicts you shoud be using a switch
​Hello guys. If any of you have some experience with docking stands, I'd appreciate some help.
I have the following docking stand​.
It has an USB-C input. Internet (via ethernet port), USB keyboard and mouse is connected to the dock. A Dell P2210 (temporary) monitor is connected to the dock via DisplayPort.
I tried to connect the S8 to it and almost everything works beside the video.
The phone charges, the mouse cursor is moving on the phone screen and can type with the keyboard, but there is no video on the monitor.
The S8 says HDMI Connected, and also the monitor does not say when selecting DisplayPort input the "NO SIGNAL DETECTED" as usual.
Maybe some setting is needed? Displayport can be the issue?
Just to be clear, I do not want to run DeX on the docking station, just mirror the screen to the monitor.
Try using Sidesync from Samsung and it works on WiFi as well as using the existing USB C type cable for mirroring on screen. But for that to work your monitor needs to be connected to a PC.
This is probably a dumb question, but I have two monitors both running HDMI cables to a port replicator then to a laptop. I can get each monitor running separately, but not at the same time. My laptop will not recognize the second monitor. Do I need one monitor to have a HDMI and the other a DisplayPort?
All drivers are updated.
Thanks,
Nylo
Fixed it. Try another docking station and I worked. It's still glitchy. On boot one monitor comes on. What I do is simply pull out the HDMI hookup from the station and put it back in. Poof! Second monitor kicks in
what model of doc station u use?
Press Win and P buttons at the same time and can choose between modes.
Hello there!!!
Is any way to connect the MiBox controller to Shield Tv, I need it to connect because of my father who is an elderly man does not want to use the new controller...
Any thoughts about how to do it? Also, I try it but in the shield does not appear, but if I try to connect a speaker it appears.