So, I'm trying to use the MSM Tool trick to oem unlock my phone from another thread, and I can't seem to keep my phone in EDL Mode. I have the Qualcomm drivers properly installed--when I get it to go into EDL mode, my device manager properly recognizes it as "Qualcomm HS-USB QDLoader 9008," but it only seems to want to stay in EDL mode for a few seconds, then it boots back up. I've tried doing this through adb and by holding volume + and - and plugging in the cord--both methods, same result. Anyone have any suggestions? I greatly appreciate your feedback!
I always power off my phone. Then hold both volume buttons down and plug it in. MSM tool sees my phone and hit start.
which Qualcomm drivers you installed ? because my phone is not connecting with MSM tools ....
I'm having the same issues. Anyone find a fix?
Charles: said:
I'm having the same issues. Anyone find a fix?
Click to expand...
Click to collapse
I installed twrp recovery software to go into EDL mode after that all works fine and connected
Zain ul Abedin said:
I installed twrp recovery software to go into EDL mode after that all works fine and connected
Click to expand...
Click to collapse
Which TWRP?? Did you load it via Fastboot and use Fastboot commands? Are you A11? Which Qualcomm drivers?
I basically forget that , but search about it . And install TWRP in your phone
otoyayamaguchi said:
So, I'm trying to use the MSM Tool trick to oem unlock my phone from another thread, and I can't seem to keep my phone in EDL Mode. I have the Qualcomm drivers properly installed--when I get it to go into EDL mode, my device manager properly recognizes it as "Qualcomm HS-USB QDLoader 9008," but it only seems to want to stay in EDL mode for a few seconds, then it boots back up. I've tried doing this through adb and by holding volume + and - and plugging in the cord--both methods, same result. Anyone have any suggestions? I greatly appreciate your feedback!
Click to expand...
Click to collapse
I think it's supposed to only last for a few seconds. Pull up the MSM Tool and pay attention to the "Status of Connection" field for any of the COM lines in the MSM Tool. When you connect, it should say "Connected" for one of those lines. If that happens at all, then you're good to proceed. Make sure you have TMO selected in the drop-down, click "Enum" once you plug in your device, then click Start. Try to do this quickly. Let me know if this helps.
I am having the same problem with my 7T Pro McLaren, the pc recognizes it but msm tool does not, someone has already found the way
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I had the same issue. One easy fix is switching from a USB 3.0 port to USB 2.0 port. The other method that worked for me is a little more of a process.
1) Have MSM open
2) Connect phone to PC
3) Power phone off
4) Then, the moment it powers down, hold the vol +, -, & power button
5) Keep holding it. Your PC will make a sound notifying you that it's detected the phone, but you want to keep
holding the buttons until you hear it being detected for the second time.
6) Release buttons.
Hopefully that makes it stay in EDL mode for you.
I wrote on this somewhere, but you can try having the program open and placed at the right settings, then move quickly once the phone is in EDL mode. Not ideal but worked for me. Once the process begins it won't exit out of EDL mode in my experience.
hii, from most tutorial i have seen so far, the com number is show in the msm tool upon starting the program, most the two msm tools i have tried so far dont show com number... and its not detecting my phone.
Related
I was going back to stock using the KDZ method and USB cable came unplugged during the process. It gets the secure boot error and is stuck in the DemiGod Crash Handler. Computer only recognizes the COM and Modem. NO ADB, FASTBOOT, DOWNLOAD MODE, RECOVERY, SAFE MODE, NO NOTHING. Anyone have the same thing happen?
NBreunig3 said:
I was going back to stock using the KDZ method and USB cable came unplugged during the process. It gets the secure boot error and is stuck in the DemiGod Crash Handler. Computer only recognizes the COM and Modem. NO ADB, FASTBOOT, DOWNLOAD MODE, RECOVERY, SAFE MODE, NO NOTHING. Anyone have the same thing happen?
Click to expand...
Click to collapse
This exact thing happend to me yesturday ... Freaking DemiGod Crash Handler Error mesg on screen !! if u find the solution please do let me know as well
maxpain007 said:
This exact thing happend to me yesturday ... Freaking DemiGod Crash Handler Error mesg on screen !! if u find the solution please do let me know as well
Click to expand...
Click to collapse
Plug into your computer via usb. Open device manager. If you see qhsusb_bulk then follow this guide to fix. Unfortunately I didn't get that therefore there is no fix...However I was very grateful because Verizon let me get an early upgrade. I now have a G3.
DemiGod cras handler: critical error
Good day, if flash bootloader changer on my lg g2 verizon on cloudy3.3...
this is what i got at the end of the day. Is their a way out please help me out. What do i need to do to make my phone come up again because it will not boot saying somthing like....
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
please help
Well bro I was stuck with the same issue..
This happens to me when i flashed a wrong twrp recovery for lg g2 d801 and it was stuck in critical error i was also unable to access download mode ..
But my Good luck was that i recovered it by doing silly thing ?
So i do following things. But make sure u know the corrert version of your lg g2 to flash kdz file with lg flash tool and also must have lg drivers intalled.
Steps to perform.
1. While in critical error screen you have an option to press volume up button to boot into download mode( although it will not boot to download mode) but still press volume up button so your Pc can detect your phone.
2. Now flash a kdz file of your lg g2 with flash tool. ( you can google for it to download flash file for your lg g2 and how to flash it with lg flass tool.)
3. When you will try to flash it will fail..
4. Now power off your phone by pressing power button.
5. Now boot to download mode and flash the correct kdz with lg flash tool and u r good to go..
To acess download mode power off your phone immediately press volume up button and while keep pressing it and plug in usb cable and you will be in download mode
Hello,
My LG G3 (D855 16go) is hard bricked.
I have the qualcomm 9008 Usb connection and I have flashed correctly, following the topic (http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359)
When I flash sbl1 at the end, I try to get in download mode .
I see the screen download mode during 2 sec, and then black screen and I get back the qualcomm 9008 USB connection.
I have tried many times to flash (V10 tot or V20), but I don't know what to do.
Could someone give me a solution, please?
PS: I have tried LGUP ,but I have model unkown and i cannot select
PS2:With flashtool, I put the port 41 and when I want to flash i got the Download FAIL!!, Model Information Check Fail (with PID:NULL,IMEI:NULL,Model(nothing),DLL : D855
PS3:with Flashtool 2014,I get stuck at 4%(Upgrading S/W)
I have spent some many hours reading topics in xda or googling but I am stuck. So please help if you have an idea
Thanks,
bonilla said:
Hello,
PS: I have tried LGUP ,but I have model unkown and i cannot select
PS3:with Flashtool 2014,I get stuck at 4%(Upgrading S/W)
I have spent some many hours reading topics in xda or googling but I am stuck. So please help if you have an idea
Thanks,
Click to expand...
Click to collapse
PS : Try with unplug and plug again USB cable.
PS3 : change DIAG with CS Emergency (do with your own risk) if you are give up.
PS2 : never tried.
I used to have a LG P970, and i unbricked it with LG flash tool. it also get stuck at 4%, as long as it keeps printing out log. after that, the phone is unbricked.
dunno it works with lg g3. hope this help.
Never_Sm1le said:
I used to have a LG P970, and i unbricked it with LG flash tool. it also get stuck at 4%, as long as it keeps printing out log. after that, the phone is unbricked.
dunno it works with lg g3. hope this help.
Click to expand...
Click to collapse
I got this message and i don't have more logs :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
fOxunO said:
PS : Try with unplug and plug again USB cable.
PS3 : change DIAG with CS Emergency (do with your own risk) if you are give up.
PS2 : never tried.
Click to expand...
Click to collapse
I tried the PS3 (change with CS Emergency) and it is the same, stuck at 4% with the same screenshot than above.
When I try to power on , I have the DemiGod Crash Handler , and when I press bottom up to go to download mode, I have the message on my phone :'Volume up is pressed Jump to dload Mode' and in some cases I have a blue led or sometimes i got a green led.
When I press volume down, it reboots and i got the same...
bonilla said:
I got this message and i don't have more logs :
Click to expand...
Click to collapse
You got this after click connection to server failed ?
Don't click the pop up , slid it to see what happened.
ops, you got 'Volume up is pressed Jump to dload Mode' , do you got DL mode before flashed ?
fOxunO said:
You got this after click connection to server failed ?
Don't click the pop up , slid it to see what happened.
ops, you got 'Volume up is pressed Jump to dload Mode' , do you got DL mode before flashed ?
Click to expand...
Click to collapse
When i power on , I got the Demigod Crash Handler
I press up to go to Dload Mode.
Then, I launch FlashTool 2014, I select the kdz and everything and then, it goes to 4%
and without pressing, I have this screen poping :
and even if I touch nothing, it doesnt change anything (In my phone , I have the demigod on the screen)
For information, I got this USB connection
Other question:
When I reflash with boardiag , each time when i finish with sbl1, i poweroff /poweron (botom up pressed) and I cannot access download mode, it goes black and I have the qualcomm 9008 usb port.
Could someone helps me with that problem ?
Thanks
Hello guys,
I tried to update my phone to Nougat and I guess I totally failed.
First I just tried to flash this rom: https://forum.xda-developers.com/axon-7/development/rom-purefusionos-official-t3670580 and it did not work. So I thought I might have to update the firmware first and installed the A2017UV1.1.0B32 NOUGAT Update from this thread: https://forum.xda-developers.com/axon-7/development/rom-guide-updates-to-stock-files-via-t3469484. I found out I had to flash (with TWRP) the firmware's G version so I took the A2017G_N_Modem.zip from this https://androidfilehost.com/?w=files&flid=148464.
Now I only get the "your device software can't be checked for corruption. Please lock the bootloader".
Can somehow help me and tell me if and how I can get a rom working again?
Thanks in advance.
Check forum. There are topics to unbrick your device.
Yes, I read the forums. My Problem is that I cannot enter the EDL mode for example. When I git Power + Vol Up + Vol down nothing happen except a shot red LED.
EDIT: I cannot get into fastboot aswell.. Always that screen with lock your bootloader. Pretty much the only mode I can enter is recovery with TWRP.
multimill said:
Yes, I read the forums. My Problem is that I cannot enter the EDL mode for example. When I git Power + Vol Up + Vol down nothing happen except a shot red LED.
EDIT: I cannot get into fastboot aswell.. Always that screen with lock your bootloader. Pretty much the only mode I can enter is recovery with TWRP.
Click to expand...
Click to collapse
When led blinked you are on EDL mode. Screen is black on edl mode.
Yeah I got that an now i completely **** up -.-
I made it to go back to stock. I saw yeah got that B10 version now so I tried to flash PureFusionOS and Beans GApps. Now the screen is just black when I start the phone and my computer (and one other I tested) cannot flash the the edl version via Miflash because the phone is not recognized.
When I try to enter EDL the led is not blinking anymore. Its just showing red.
multimill said:
Yeah I got that an now i completely **** up -.-
I made it to go back to stock. I saw yeah got that B10 version now so I tried to flash PureFusionOS and Beans GApps. Now the screen is just black when I start the phone and my computer (and one other I tested) cannot flash the the edl version via Miflash because the phone is not recognized.
When I try to enter EDL the led is not blinking anymore. Its just showing red.
Click to expand...
Click to collapse
Do you see your device on Device Management? If yes, it is on edl mode. go on other steps
BTW, use this guide.
WesTD said:
Do you see your device on Device Management? If yes, it is on edl mode. go on other steps
BTW, use this guide.
Click to expand...
Click to collapse
Where should I see in the device manager?
EDIT: I do hear a sound when connecting. But I dont know where to find it in the device manager. In which category.
EDIT2: Well I see one device here, but neither the Axontool nor Miflash regonize it.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
multimill said:
Where should I see in the device manager?
EDIT: I do hear a sound when connecting. But I dont know where to find it in the device manager. In which category.
EDIT2: Well I see one device here, but neither the Axontool nor Miflash regonize it.
Click to expand...
Click to collapse
Good luck. Your device on DFU Mode. There another guide about it.
multimill said:
Where should I see in the device manager?
EDIT: I do hear a sound when connecting. But I dont know where to find it in the device manager. In which category.
EDIT2: Well I see one device here, but neither the Axontool nor Miflash regonize it.
Click to expand...
Click to collapse
4th category brick repair manual, google it
Hi,
This morning I wanted to factory reset the phone and flash the latest version, but to my surprise I do not have the Download mode anymore, but I have the standard fastboot screen, wtf ?
EDIT : using "adb reboot download" worked. "adb reboot bootloader" goes fastboot and "adb reboot fastboot" goes into a reboot.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
this is normal now.. s20 devices have dynamic partitions so they implemented fastboot for using gsi n such
elliwigy said:
this is normal now.. s20 devices have dynamic partitions so they implemented fastboot for using gsi n such
Click to expand...
Click to collapse
It all changed during an update tbh. One day I could adb reboot bootloader, and land on the download mode, and now I just get fastboot.
Paradoxxx said:
It all changed during an update tbh. One day I could adb reboot bootloader, and land on the download mode, and now I just get fastboot.
Click to expand...
Click to collapse
what firmware are you on exactly?
I have a similar issue.. i get stuck at Entering Fastboot mode. After updating to latest firmware ATG4 from Australia via ODIN. Phone CSC is from Panama. I can boot to system just fine but not Download mode.
fourqui said:
I have a similar issue.. i get stuck at Entering Fastboot mode. After updating to latest firmware ATG4 from Australia via ODIN. Phone CSC is from Panama. I can boot to system just fine but not Download mode.
Click to expand...
Click to collapse
Power the phone off then with the cable plugged into the phone, keep volume button pressed and plug the other end of the cable into PC or Laptop.
west2cool said:
Power the phone off then with the cable plugged into the phone, keep volume button pressed and plug the other end of the cable into PC or Laptop.
Click to expand...
Click to collapse
Tried all key combinations. still no luck.
fourqui said:
Tried all key combinations. still no luck.
Click to expand...
Click to collapse
Mate clearly you not doing it properly. Ensure you phone is powered off then plug the USB-C into to it. Next, with the volume button depressed plug the said other end of the cable into a laptop/PC. The phone should then power up with a blue screen, press the volume up.
west2cool said:
Mate clearly you not doing it properly. Ensure you phone is powered off then plug the USB-C into to it. Next, with the volume button depressed plug the said other end of the cable into a laptop/PC. The phone should then power up with a blue screen, press the volume up.
Click to expand...
Click to collapse
Ok I got it working.. I think what you meant to say was Ensure you phone is powered off then plug the USB-C into to it. Next, with the volume UP and DOWN buttons pressed, plug the said other end of the cable into a laptop/PC. The phone should then power up with a blue screen, press the volume up
elliwigy said:
what firmware are you on exactly?
Click to expand...
Click to collapse
ATFD with ATFF baseband right now. I had whatever previous version it was before.
Dear crowd, I need support with my Samsung Galaxy Tab S5e/SM T-725 (it is my first Samsung device).
I unlocked it and tried flashing it (with Odin3). This was not successful and now I do not manage to get the device to boot into the Download Mode anymore.
The device does not switch on anymore - only with charging cable connected. In this case it turns on and off eternally showing the below screenshot.
Connecting a USB-C cable while pressing combinations of Power+ any volume key combination does not lead to any result. Only pressing Power+VolumeUp+VolumeDown brings is for a little moment to the screen where I chose to unlock the device, bot after one secons it turns off again being in bootloop subsequently.
SmartSwitch as indicated on the screenshot below does not do anything as the device is constantly turning off again.
Does anyone have a clue how to convince the device to finally allow me flashing TWRP and a custom ROM in this situation?
Advice is more than welcome!.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ralxx said:
Dear crowd, I need support with my Samsung Galaxy Tab S5e/SM T-725 (it is my first Samsung device).
I unlocked it and tried flashing it (with Odin3). This was not successful and now I do not manage to get the device to boot into the Download Mode anymore.
The device does not switch on anymore - only with charging cable connected. In this case it turns on and off eternally showing the below screenshot.
Connecting a USB-C cable while pressing combinations of Power+ any volume key combination does not lead to any result. Only pressing Power+VolumeUp+VolumeDown brings is for a little moment to the screen where I chose to unlock the device, bot after one secons it turns off again being in bootloop subsequently.
SmartSwitch as indicated on the screenshot below does not do anything as the device is constantly turning off again.
Does anyone have a clue how to convince the device to finally allow me flashing TWRP and a custom ROM in this situation?
Advice is more than welcome!.
View attachment 5423645
Click to expand...
Click to collapse
This warning screen is still download mode. Try flash stock rom via Odin.
Chosse exact firmware, when start flashing you will see the white bar below that text.
Unfortunately, it does not work as the device switches off too quickly. Odin3 then just reports failure.
I wonder if there is a way to prevent the device from switching off so quickly.
dangtoi1993 said:
This warning screen is still download mode. Try flash stock rom via Odin.
Chosse exact firmware, when start flashing you will see the white bar below that text.
Click to expand...
Click to collapse
ralxx said:
Unfortunately, it does not work as the device switches off too quickly. Odin3 then just reports failure.
I wonder if there is a way to prevent the device from switching off so quickly.
Click to expand...
Click to collapse
so sorry, mine stuck at warning sreen so i can easy flash back.
If your tab fast switches off then maybe it got bootloader damaged, you need research flash by Qualcomn flash tool like QFIL, flashsing for Qualcomn chipset device when it in QDLoader 9008 mode.