Hi. I have just bought a new head unit on aliexpress, but after checking "About device" info i found out that its not MTCB nor MTCD. It says:
2020.11.19 17:21:02 NOR_53_l6315_G23P48F64_V:1.0_FYT
I was wondering if there's any tinkering i can do with this head unit, like rooting it for example.
Related
Hello, i bought this Head Unit from aliexpress,
https://www.aliexpress.com/item/7-H...32816025031.html?spm=a2g0s.9042311.0.0.3Fwop5
I have allready install it, this is android 7.1.2, rockchip PX3, like the description in the page above.
Is it possible to root this unit, and if will i unlock features ? what features ?
What is possible to do with this android unit in the fiat egea/tipo from 2016, i have the canbus decoder installed, and steering aassists is working fine.
Best regards for everyone
I installed the Joying JY-BO124N3 Android head unit which works great. The problem I'm having is the car is displaying metric units on start up. To fix this, I have to go into the head unit settings and change to imperial/American units which will then display the correct units on the dash/climate control. The headunit itself always displays the correct Imperial units (mph, F, etc). I contacted the manufacturer who said it wasn't possible to permanently change through the head unit. The Eunavi Android head unit in my Toyota doesn't have this problem so I'm assuming the problem is with the BMW. Is there anyway I can permanently program/code out metric units so only Imperial information is displayed on my dash?
I did a review on the head unit and show this problem at 3:23:
hhttps://youtu.be/Qo9wvzU1L_s?t=203 (Delete the first 'h'. I can't post links on here yet)
kazbek1 said:
I installed the Joying JY-BO124N3 Android head unit which works great. The problem I'm having is the car is displaying metric units on start up. To fix this, I have to go into the head unit settings and change to imperial/American units which will then display the correct units on the dash/climate control. The headunit itself always displays the correct Imperial units (mph, F, etc). I contacted the manufacturer who said it wasn't possible to permanently change through the head unit. The Eunavi Android head unit in my Toyota doesn't have this problem so I'm assuming the problem is with the BMW. Is there anyway I can permanently program/code out metric units so only Imperial information is displayed on my dash?
I did a review on the head unit and show this problem at 3:23:
hhttps://youtu.be/Qo9wvzU1L_s?t=203 (Delete the first 'h'. I can't post links on here yet)
Click to expand...
Click to collapse
Bump
Anyone?
I can’t help other than to say I had the same issue with my BMW E90 and an Eonon unit so it seems like this might be an E90 thing with these aftermarket head units?
britain4 said:
I can’t help other than to say I had the same issue with my BMW E90 and an Eonon unit so it seems like this might be an E90 thing with these aftermarket head units?
Click to expand...
Click to collapse
Ah, thanks for the reply. This is super helpful. I'm just relieved to hear that someone (unfortunately) had the same issue as me. If my Joying and your Eonon are doing the same thing, then I can pretty much narrow down that it's on BMW's end.
Hi guys,
I am currently using an S10 Head Unit but honestly I can't use any apps anymore since it is so terribly slow. Therefore I was considering a 'Tesla Style' Head Unit.
During my research I've found out that the units based on the Intel IA Chip seem to be more powerful than the PX6 based ones.
Therefore I amthinking about the following unit from Witson: Android 9.0 For OPEL ASTRA J/VAUXHALL HOLDEN 2010-2013 (TTF1974)
However I am reading a lot about Joying Head-Units but they don't seem to offer anything for my Opel/Vauxhall Astra J.
My question is, is there any SW Support for the unit from witson?
Can I even flash the SW from Joying? But Joying has only the Android 8.1 for the SC9853i but the Unit above is delivered with Android 9.
Does anyone even have some experience with the mentioned head unit or can give me any kind of input / Links?
I already saw the threads in this category but honestly I am not sure how well they apply to the Unit from Witson.
Hi All,
I've bought a new Android Head-Unit for my car, it is an Android 12 based device but I'm not able to understand if it is an MTCD, MTCB or anything else.
Attached are two screens with the device details, any hints on what it is or what I should look for?
PS: the unit is available on Amazon, but I cannot find more details anywhere.
Thanks!!
No one can put me on the right way to properly identify this head unit?
Hello,
How can I find out what model, type of unit, manufacturer I have?
Thank you.
Hi, go to car settins and find option "about device", there is info about your unit. HMI MCU and other info regarding unit.
By the look and description in headline i would say it is TS10 or TS18 unit like Topway or Alwinner