needed help with 8259 skyshadow android radio loop/crash - Android Head-Units

Hi,
Need help with radio loop/crash.
Problem:
when i connect the canbus decoder cord and start the car then the android crashes and a loop occurs. When unplug and reconnect everything works.
From 8888 menu canbus is choosen: BMW E46.
Video with problem: https://we.tl/t-ZYkWPYDzPt
Car: x5 e53 2006 with original DSP amplifier.
Radio:
Skyshadow Carplay 10.25" DSP IPS Android 10 4G 64GB SIM Car DVD Player GPS map WIFI Bluetooth RDS Radio For BMW M5 E39 X5 E53 Range Rover
Device name: 825X_Pro
Model: 8259
Build number: full_825X_Pro-userdebug 10 PPR1.180610.011 eng.root.20200426.093427 userdebug
Custom build version: android-trunk-p0.ac8257
MCU: TS-G5.200710
MEDIA: HC_v2.0.0_200925_1100(v1.83)
Canbus decoder:
KD 20210123 URXT
For Bmw E39/E46
HW:v4 SW:v3

Problem solved. In the 8888 canbus menu, it was necessary to switch off the outdoor temperature display.

Hello
Can you give me please your firmware.
I flashed other firmware, and can't get it back to original

aeast85 said:
Problem solved. In the 8888 canbus menu, it was necessary to switch off the outdoor temperature display.
Click to expand...
Click to collapse
THANK YOU! I have just created account to write this. I was going mad trying to solve this problem, at first I thought that can bus decoder is bad.

Related

CANBUS not working? - PX5 MTCE MX Android 8.0 Rockchip 4 GB RAM by Witson

Hello everyone.
SORRY FOR MY ENGLISH!!
I recently purchased an Android PX5 car stereo (MTCE_MX from Witson) the 4GB version with Android 8 for my Fiat Doblò 2012.
Exactly this car radio: LINK WITSON
My problem is : CANBUS DECODER (link)
I connected the cables, etc. .. by default, everything works. The fact is that the canbus does not give me the information I would like.
When I open the door I see an image that is the same as this LINK, but nothing else.
Looking for solutions on the internet, I saw that many have an app installed, such as "Vehicle (link)" or "Car Info" where you can see a lot of information (like this LINK image)
Is it an application problem or is my car the problem?
Thanks a lot
im missing these apps as well. i have mercedes canbus
@GianniDarkos is the canbus box the one you are using? Wondering as I would expect VW-SS-03 would indicate SimpleSoft and Volkswagen but not Fiat. Would expect if VW-SS-03 should be the canbus decoder version 01 VW (Simple) should be the right canbus setting. Have you checked canbus box settings inside Factory settings? Which one is selected? Vehicle link might not show up for all canbus boxes.

Canbus info suddenly disconnected

Hi all ,
can anyone give a hand in this problem :
I just bought an android head for peugeot 307 year (2007) canbus version , comes with Raise canbus
version PSA-RZ-15
sw: V0103
hw: VW-NC03
works fine and read car info but suddenly after changes some car models protocols, it disconnected, even if I choose the previous car model.
in System Info. gives the canbus model : (Peugeot 408.disconnected) !!!
I did a factory reset and change the canbus model many times without any success.
Now every things related to canbus is not working (Wheel buttons ,Fuel info ,Reverse Radar ,etc.)
what should I do?
Thanks in advance.
i have same problem in 2022 with peguet 301 model 2015 and use hiworld can bus
i have the same problem with hiworld canbus it didnot work every time mostly disconnected

Unbranded 8227L_demo - No access to onboard computer - Simulated buttons not working

Hi everybody!
I recently bought a 8227L_demo unbranded Chinese android stereo.
Unfortunately, I can’t control the screen on the dashboard because the simulated buttons are not working…so I can't access the clock and time settings on my display...
Below you can see all my system information (unfortunately I can't attach picture because I'm a newbie).
I have a CANBUS Raise psa-rz-15 device.
Steering Wheel Controls are regularly functioning.
My car is a Citroen C3 (year 2008).
I set the Peugeot 307 (2002-2013) Canbus protocol; however, I tried all the available protocols one by one but nothing changes.
Anybody else has the same problem? What can I do to solve?
Maybe with a firmware update?
Thanks again in advance
Android: YT9213AJ_AHD_00011_V001_20200323
Android os: 9.1
XY AUTO: 3.2 (8227L)
CAN PRO: 3.0 (8227L): )/Peugeot307(2002-2013)
DDR: 1G
FLASH: 16G
Cpu: A7 1.3Ghz x 4
Display: 1024*600
MCU: 3.1 (8227L)
Kernel version
3.18.22
[email protected] #4
Mon Mar 23 17:18:00 CST 2020
Build number
android-trunk-m0.AC8227L-V1.0
What did the reseller suggest?
marchnz said:
What did the reseller suggest?
Click to expand...
Click to collapse
Unfortunately I wasn't able to contact the seller...
Go to -> Car setting -> General
Touch the gear top right.
Enter 8888
Change CanBus Settings to Peugeot 307
Hi!
I already set the Peugeot 307 (2002-2013) Canbus protocol and I tried all the available protocols one by one but nothing changes...
My problem is shown here: https://youtu.be/IWp7nXfxk94?t=1152
bosun8472 said:
My problem is shown here:
Click to expand...
Click to collapse
Hi,
Do you solve your problem ? i have the same for my 308 car with PSA-RZ-15 CANBUS ?
Which canbus do you have ?

PX5 MTCE Android 10 - WiFi Connectivity / Stability Issues

Hi All,
I'm bit new to the world of Android Head Unit who recently purchased a PX5 Android 10 head unit for my Peugeot 407.
After installation everything works fine expect for one problem. WiFi doesn't work.
If I turn ON the WiFi, it finds my network, connects to it, and then immediately the WiFi turns OFF. It keeps turning ON and OFF in loop.
So reached out to my seller who provided a firmware file using which I upgraded my unit successfully. But no luck. WiFi still has the same problem. It keeps turning ON and OFF in continuous loop.
Head Unit Specifications
Car: Peugeot 407
Unit: PX5
CPU: Octa-core Cortex-A53 @1.5G
Memory: 4GB
Storage: 64GB
MCU Version: MTCE_MX2_V3.60_1
Kernel Version: 4.19.111+
Build Number: rk368-userdebug 10 [email protected] eng.hct2.20200909.085823
Bluetooth Module: WQ_RF210 (as pre-selected in the Factory settings in the head unit)
I've attached a video of my symptoms as well. Please can you have a look and advise / point me in the right direction to fix this WiFi problem.
I spent time tracking down the seller for firmware update because I'm not sure how to identify the specific model / manufacturer etc of the unit.
Any advise on how to identify the finer details associated with the Head Unit Model would also be very helpful.
Thank you.
livewyr said:
Hi All,
I'm bit new to the world of Android Head Unit who recently purchased a PX5 Android 10 head unit for my Peugeot 407.
After installation everything works fine expect for one problem. WiFi doesn't work.
If I turn ON the WiFi, it finds my network, connects to it, and then immediately the WiFi turns OFF. It keeps turning ON and OFF in loop.
So reached out to my seller who provided a firmware file using which I upgraded my unit successfully. But no luck. WiFi still has the same problem. It keeps turning ON and OFF in continuous loop.
Head Unit Specifications
Car: Peugeot 407
Unit: PX5
CPU: Octa-core Cortex-A53 @1.5G
Memory: 4GB
Storage: 64GB
MCU Version: MTCE_MX2_V3.60_1
Kernel Version: 4.19.111+
Build Number: rk368-userdebug 10 [email protected] eng.hct2.20200909.085823
Bluetooth Module: WQ_RF210 (as pre-selected in the Factory settings in the head unit)
I've attached a video of my symptoms as well. Please can you have a look and advise / point me in the right direction to fix this WiFi problem.
I spent time tracking down the seller for firmware update because I'm not sure how to identify the specific model / manufacturer etc of the unit.
Any advise on how to identify the finer details associated with the Head Unit Model would also be very helpful.
Thank you.
Click to expand...
Click to collapse
Did you check the wifi antenna?
I have a 407 - (2007) - does your head unit allow for aircon and heating/ventilation controls and all the canbus functions?
my orange dispaly is failing so thought I'd install one of these instead
Do you have a link for the one you bought? I've been looking for octacore - most are quad
Thanks
Found some interesting info here
[SOLVED] I can’t turn ON my Wi-Fi... Need help
I have update my mtce px3 Android 7.1 MTCE with a px5 Android 6 and charged malaysk rom based on Android 8.0... but afther that i can’t turn ON my Wi-Fi. Bluetooth working perfect... all the thing working good.. only Wi-Fi don’t wont to turn on...
forum.xda-developers.com
maybe unplug any usb's you have, and/or request a firmware update from vendor
snailer said:
Did you check the wifi antenna?
I have a 407 - (2007) - does your head unit allow for aircon and heating/ventilation controls and all the canbus functions?
my orange dispaly is failing so thought I'd install one of these instead
Do you have a link for the one you bought? I've been looking for octacore - most are quad
Thanks
Found some interesting info here
[SOLVED] I can’t turn ON my Wi-Fi... Need help
I have update my mtce px3 Android 7.1 MTCE with a px5 Android 6 and charged malaysk rom based on Android 8.0... but afther that i can’t turn ON my Wi-Fi. Bluetooth working perfect... all the thing working good.. only Wi-Fi don’t wont to turn on...
forum.xda-developers.com
maybe unplug any usb's you have, and/or request a firmware update from vendor
Click to expand...
Click to collapse
I can't find my exact seller listing but below link is a similar eBay listing for the same model I have got.
Peugeot 407 Android 10 PX5 4-64
Yes, it integrates seamlessly with canbus / climate control etc. It comes with a canbus connector. There's an option to connect reverse camera if you want to. But you have to buy the reverse camera separately. Other than that there's a GPS antenna, built in and extra microphones for phone calls, memory card slot, USB slots etc.
I wouldn't recommend any sellers for this kind of after market head units as they are all sold / shipped by overseas / international sellers. There's always a risk with this type purchases. So proceed with caution. If you end up getting a good unit, the risk is well rewarded. Your Pegueot gets a major upgrade.
All the best!
Thanks!
I've been looking at these ones.
Still undecided
Might just get a new mfd screen & keep using my phone!
plamenangelov said:
I have a problem with my auto daylight, my old navigation system was Rneg and all work fine. When start engine auto daylight in on but when install new Witson auto daylight stop work, i must start it manuali on setting via Witson unit. I have menu auto daylight runigh light when touch it, light is on but button still unactive.
Click to expand...
Click to collapse
Maverickky said:
I have the same problem, any solution?
Click to expand...
Click to collapse
livewyr said:
Hi All,
I'm bit new to the world of Android Head Unit who recently purchased a PX5 Android 10 head unit for my Peugeot 407.
After installation everything works fine expect for one problem. WiFi doesn't work.
If I turn ON the WiFi, it finds my network, connects to it, and then immediately the WiFi turns OFF. It keeps turning ON and OFF in loop.
So reached out to my seller who provided a firmware file using which I upgraded my unit successfully. But no luck. WiFi still has the same problem. It keeps turning ON and OFF in continuous loop.
Head Unit Specifications
Car: Peugeot 407
Unit: PX5
CPU: Octa-core Cortex-A53 @1.5G
Memory: 4GB
Storage: 64GB
MCU Version: MTCE_MX2_V3.60_1
Kernel Version: 4.19.111+
Build Number: rk368-userdebug 10 [email protected] eng.hct2.20200909.085823
Bluetooth Module: WQ_RF210 (as pre-selected in the Factory settings in the head unit)
I've attached a video of my symptoms as well. Please can you have a look and advise / point me in the right direction to fix this WiFi problem.
I spent time tracking down the seller for firmware update because I'm not sure how to identify the specific model / manufacturer etc of the unit.
Any advise on how to identify the finer details associated with the Head Unit Model would also be very helpful.
Thank you.
Click to expand...
Click to collapse
Have you guys found any solutions to your canbus problems with Peugeot 407? I lost my automatic headlights / daylights which I'd love to have back. Have you encountered and solved other issues with Android head units?
I can't either enable some car functions from car app from head unit (automatic lights, rear wiper, parking radar etc.). Can you see the outside / inside temperatures of the car somewhere? My A/C works somehow (responses like it should to physical buttons, but I bet it has mechanical faults instead communication problems with head unit).
gratnak said:
Have you guys found any solutions to your canbus problems with Peugeot 407? I lost my automatic headlights / daylights which I'd love to have back. Have you encountered and solved other issues with Android head units?
I can't either enable some car functions from car app from head unit (automatic lights, rear wiper, parking radar etc.). Can you see the outside / inside temperatures of the car somewhere? My A/C works somehow (responses like it should to physical buttons, but I bet it has mechanical faults instead communication problems with head unit).
Click to expand...
Click to collapse
What did the reseller suggest when contacted for support.
livewyr said:
Hi All,
I'm bit new to the world of Android Head Unit who recently purchased a PX5 Android 10 head unit for my Peugeot 407.
After installation everything works fine expect for one problem. WiFi doesn't work.
If I turn ON the WiFi, it finds my network, connects to it, and then immediately the WiFi turns OFF. It keeps turning ON and OFF in loop.
So reached out to my seller who provided a firmware file using which I upgraded my unit successfully. But no luck. WiFi still has the same problem. It keeps turning ON and OFF in continuous loop.
Head Unit Specifications
Car: Peugeot 407
Unit: PX5
CPU: Octa-core Cortex-A53 @1.5G
Memory: 4GB
Storage: 64GB
MCU Version: MTCE_MX2_V3.60_1
Kernel Version: 4.19.111+
Build Number: rk368-userdebug 10 [email protected] eng.hct2.20200909.085823
Bluetooth Module: WQ_RF210 (as pre-selected in the Factory settings in the head unit)
I've attached a video of my symptoms as well. Please can you have a look and advise / point me in the right direction to fix this WiFi problem.
I spent time tracking down the seller for firmware update because I'm not sure how to identify the specific model / manufacturer etc of the unit.
Any advise on how to identify the finer details associated with the Head Unit Model would also be very helpful.
Thank you.
Click to expand...
Click to collapse
Hello there,
See this workaround.
Custom ROMs such as @Hal9k_ 's Mod V5 have workarounds for this under Mod settings. In that ROM, go to Mod settings, select "Hardware settings" and toggle on the "Reset USB devices when booting or waking up".

Unknown Android headunit. Who helps?

Hi guys,
I have owned different MTCD headunits (all px 3/5).
For my new car I ordered a 64/4 headunit but it seems like it's a different chipset etc.
As I have a few problems with is and the seller isn't respnding (yet) I'll hope you can help me identify the unit so I can update firmware/mcu etc
Cons:
Biggest issue: GPS is not working. Because of that the time and date are off. If adjusting it manually it stays on the time and date from where the unit gets to sleepmode and won't adjust untill manual adjustment.
I have a annoying humming sound in the OEM subwoofer. It wasn't there with the Kenwood headunit that was installed before this one. Still can't solve it. It also humms when the RCA aren't attached so it seems a power input issue to the amp of the subwoofer. Still figuring out what to do about it.
Pros:
It seems to have wireless Android Auto besides wireless Carplay. It was not advertised but when I put on my hotspot from my mobile, it autostarts Android Auto on the headunit. Very nice!
Bought on Hipzo store (Aliexpress).
CPU INFO: UIS8581A (Octa 1.6GHZ)
MCU: 2021.12.10 15:04:26 NOR_53_L6315_G23P48F64_V:1.0
Android 11 (not sure, seems like Android 10 because of buildnumber)
buildnumber: QP1A.190711.020
System info: APP 1024x600 2021-12-11
Any help is appreciated.
Hello,
Could you share the findings about this head unit?
I have the same head unit, except for CPU and display resolution. I am still trying to understand what is the version which is compatible with this head unit.
Any info is well appreciated.
UIS7862 FYT based unit

Categories

Resources