Hi everyone,
I have a s4 Active sgh i537. I want to have Lollipop and Xposed installed. To this end I flashed it back to Kitkat, towelroot'd it, flashed the I537_OC7_Stock_Rooted_Deodexed_ROM to preserve the root. I've tried to use the recovery option that comes with the rom to flash the Xposed framework and install the apk but Xposed said that the framework wasn't installed. Figured that the rom doesn't come with a custom recovery. Then I tried afterwards to flash the framework using flashfire the same way I flashed lollipop. The att splash screen load and got stuck for over 6 hours.
I'm going to try reflashing kitkat and starting over but I was wondering if I'm doing something wrong.
rom: http://forum.xda-developers.com/galaxy-s4-active/general/how-to-update-to-i537oc6-5-0-1-t3089355
Xposed framework SDK21 arm v86: http://dl-xda.xposed.info/framework/sdk21/arm/
Edit 1: went through again and I learned I needed the touchwiz Xposed Framework. Installed and my phone now can run Lollipop and install Xposed
New question regarding adb. I'm trying to install MicroG and I can't seem to connect adb and my phone together to remove the /system/priv-app/ and /system/app/ prerequisites any help with this would be extremely helpful
hope i am not violating any forum rules here, as i know how strict they can be. I am not a noob in this area, ive rooted and flashed all my phones since my droid x on. I miss my s-off HTC so bad. I did 5 minutes of research and thought all Galaxy S7s were bootloader/recovery unlockable...only to find out the american versions arent after im stuck with s Sprint SM-G930P. I was able to root and install xposed with the engineer boot.img and odin. Since TWRP or recovery isnt an option I have tried for months to systemless root this thing to hide root and pass safetynet. Ive tried flashfire to flash SU systemless 2.78SR5 and root switch and am on android 6.0.1 PE1 firmware following guides here: https://forum.xda-developers.com/sprint-galaxy-s7/how-to/sm-g930p-root-t3410604 but after factory reseting and trying Rootswitch (will hide exposed but not root with flashfire installing it since bootloader lock doesnt allow TWRP) I piddled with magisk but I am not on the Equinox unlockable s7 and am just at a loss here. Any one out there know of a way to hide root with this version of S7? Im out of ideas and any help here is appreciated. When i flashfire Supersu i get the locked out modified boot img error, but selecting AP and flashing the engineer boot img will get me back up rooted but root switch is a no go. I can use buildprop/rootzwitch to set selinux permissive sstatus but still fail. I refuse to let samsung not let me root my phone properly. I ser xposed modules like snorlax being updated so there seems to be a way to use xposed modules in PoGo while hiding root/xpised but every guide i see leads to TWRP instructions. Can i adb/terminal install magisk/rootswitch? and stiil use modules? (Cart before the horse question seeing as right now i cant bypass safetynet.) HELP!!
Have you made any more progress with this by chance?
I just rooted my phone and trying to get Airwatch to not detect root. I saw a thread for Unwatch and was following root guide to install xposed, but that makes airwatch crash, and then I read if xposed is installed it wont work.
Then something mentioned Magisk. Now Im not sure what that is but then something else said you need xposed for magisk?
So I'm going in circles and not sure where to go from here.
hello everybody,
I bought the Huawei Mediapad M3, I unlock it’s boot loader and installing a new custom Recovery (Greatslon mod) and then flash SU, so the tablet has been correctly routed and everything worked perfectly.
Hounever I think: if you routed your device without install Xposed Framework , you don’t have many many important functions.
Later, I wanted to also install Xposed Framework, I followed the instructions for Marshmallow 6.0 provided by rovo89
but unfortunately when I reboot my M3 it going boot loops, I restored the system with the prior backup
and tried again with apk Xposed , but still the same boot loops, maybe there is something wrong in that Xposed.
Is there anyone who has found a solution to install Xposed Framerwork on Mediapad M3.
when i used marshmallow i used magisk v12 to root and then used systemless xposed v87 from there. worked for me. v87.1 disabled my fingerprint reader
trd_jzx100 said:
when i used marshmallow i used magisk v12 to root and then used systemless xposed v87 from there. worked for me. v87.1 disabled my fingerprint reader
Click to expand...
Click to collapse
I think it is not important how one rooted marshmallow if after everything works fine, but also i used
xposed v87 from there, and the result is boot loops, maybe it work well on other devices while on huawei mediapad m3 is not good
what I am trying to say is use the systemless xposed and it will work.
trd_jzx100 said:
what I am trying to say is use the systemless xposed and it will work.
Click to expand...
Click to collapse
thanks for your help, i will first try installing the Magisk interface, in order to install systemless Xposed with Magisk, and then i'll write the result
i flash Magisk , reboot the device, then i installed MagicManager.apk so i use MagicManager.apk to download and install automatically the right version of systemless Xposed framework, but when the device does the boot loader goes into the boot loop, i do not know what to do yet to run the xposed framework on my mediapad m3, i went crazy i never had trouble with various smartphones, i never had a tablet, damn the day i bought it, now i reset it to factory, and then i would like to make a final test before breaking it, do you can kindly list the various steps in the details you've been following, thank you in advance
well I am not sure then why your getting boot loops. so you have installedmagiskv12-then,magisk,manager and then go to module and flash the downloaded v87 framework there
link for v87 systemless frameworkhere
https://forum.xda-developers.com/xposed/unofficial-systemless-xposed-t3388268.
then after that install this it should be working but dont update to v87.1 or your fingerprint sensor might play up
link for the xposed apk
https://forum.xda-developers.com/xposed/material-design-xposed-installer-t3137758
thanks trd_jzx100,
at this time i brought my tablet back to the factory, before starting a new rooting procedure + installing xposed i would still have two questions:
1) after you made the unlock, which TWRP you installed to flash magisk?
2) i see from the link you posted that the xposed file you used is xposed-v87.0-sdk23-topjohnwu.zip instead i used xposed-v87-sdk23-arm64.zip maybe that was also a problem
later if all goes well, i will write the synthesis of the entire step-by-step procedure for the benefit of all mediapad m3 owners who want to do the same thing with no problems
finally xposed works, i used the system less rooting and then installed xposed v87 by topjohnwu,
now i have a issue with the xprivacy module but this is another story
trd_jzx100 said:
when i used marshmallow i used magisk v12 to root and then used systemless xposed v87 from there. worked for me. v87.1 disabled my fingerprint reader
Click to expand...
Click to collapse
Did you re-install when you got Nougat??? If so, can you help me out?
Ok so I've been having a hell of a time with this phone so far. I have the boost mobile variant (xt1766). I unlocked the bootloader, installed twrp, but forgot to make a backup before flashing supersu, after which my phone would no longer boot so I flashed lineageOS. It booted up fine but I had no 3g connection so I wanted to go back to stock. I downloaded the stock firmware, but couldn't get RSD lite to install on my computer so I extracted all the files and flashed them manually with fastboot. After that my phone wouldnt boot and TWRP couldnt mount the data partition so I couldnt restore my lineage backups. I had to format the data partition in order to restore from backup but now I have nothing on internal storage, and my phone wont boot into system unless I boot into factory mode from the bootloader. It boots up fine in factory mode but now I have no network connection, no service whatsoever.
Under sim status it says Network: unknown, cellular network type: unknown, Service state: Radio Off, etc. I tried manually turning the radio on but that didn't work. I really just want to go back to stock but I don't understand how to accomplish this. I flashed everything in the firmware package in the correct order, and somehow it just rendered my phone useless. any help would be much appreciated. I've tried just about everything and I'm at a loss here.
Update:
I successfully got back to stock. For some reason executing the fastboot commands manually one at a time didn't work so I made a bat file with all the proper commands, executed it, and this time it worked. Not sure why it didn't work the other way but it might be because I didn't flash the stock recovery so as not to replace TWRP. Apparently when flashing firmware its all or nothing.
Are there any custom ROMs with 3G functionality for this device? Cuz so far every single one I've tried gets no network connection but this stock ROM is lame.
AMShiech said:
Are there any custom ROMs with 3G functionality for this device? Cuz so far every single one I've tried gets no network connection but this stock ROM is lame.
Click to expand...
Click to collapse
Not "lame" unless that's the latest descriptor for a reliable, fully functional, device optimized ROM that just works. If you want additional bling/tweaks flash Xposed framework and a few well regarded modules like GravityBox.
Alternatively, you can cycle through the various custom ROMs and decide which suite of compromises you're willing to live with. Suggest a careful read of the relevant ROM thread before diving in. Be sure to backup what works (including stock!) and store those nandroids on a SD card and/or off-device.
Good luck.
AMShiech said:
Update:
I successfully got back to stock. For some reason executing the fastboot commands manually one at a time didn't work so I made a bat file with all the proper commands, executed it, and this time it worked. Not sure why it didn't work the other way but it might be because I didn't flash the stock recovery so as not to replace TWRP. Apparently when flashing firmware its all or nothing.
Are there any custom ROMs with 3G functionality for this device? Cuz so far every single one I've tried gets no network connection but this stock ROM is lame.
Click to expand...
Click to collapse
That's because you're on boost, not many ROMs here have CDMA support. There is a fix in the help section. But stock is fine for me. Gravitybox and all features of any of the broken unofficial ROMs are all there. Rock solid, and LTE. But flash away dude.
madbat99 said:
That's because you're on boost, not many ROMs here have CDMA support. There is a fix in the help section. But stock is fine for me. Gravitybox and all features of any of the broken unofficial ROMs are all there. Rock solid, and LTE. But flash away dude.
Click to expand...
Click to collapse
I haven't been able to install the Xposed framework. Xposed installer says my CPU architecture is incompatible. When I flashed Xposed v89 for nougat my phone wouldn't boot past the boost logo. I keep hearing about people getting Xposed working on this device but I can't figure out how they're doing it. I would love to be able to have gravity box on this ROM.
Apparently the purityOS guys made an unofficial work around a while back but all the download links in that thread are dead and I can't find it anywhere else. It's my understanding that i need to be able to set selinux to permissive on boot in order to install Xposed.
AMShiech said:
I haven't been able to install the Xposed framework. Xposed installer says my CPU architecture is incompatible. When I flashed Xposed v89 for nougat my phone wouldn't boot past the boost logo. I keep hearing about people getting Xposed working on this device but I can't figure out how they're doing it. I would love to be able to have gravity box on this ROM.
Apparently the purityOS guys made an unofficial work around a while back but all the download links in that thread are dead and I can't find it anywhere else. It's my understanding that i need to be able to set selinux to permissive on boot in order to install Xposed.
Click to expand...
Click to collapse
No, regular Xposed. Wipe cache and dalvik, and wait. Let it sit 5 - 10 minutes. It has to optimize everything. Make sure it's the arm build. It works fine, just gotta let it sit. First boot takes a good bit.
Or use magisk, and install Xposed through that.
Do not use that old purity crap. That's why the links are dead. It's old crap. Xposed works fine with no extra steps or messing with selinux.
AMShiech said:
I haven't been able to install the Xposed framework. Xposed installer says my CPU architecture is incompatible. When I flashed Xposed v89 for nougat my phone wouldn't boot past the boost logo. I keep hearing about people getting Xposed working on this device but I can't figure out how they're doing it. I would love to be able to have gravity box on this ROM.
Apparently the purityOS guys made an unofficial work around a while back but all the download links in that thread are dead and I can't find it anywhere else. It's my understanding that i need to be able to set selinux to permissive on boot in order to install Xposed.
Click to expand...
Click to collapse
That's BS; don't overcomplicate things. Xposed framework installs fine in enforcing mode. Make sure you have the correct framework for Android 7.1 (SDK 25) and your hardware (arm). You will also need the corresponding management app. There is no need to wipe anything before/after flashing the framework although doing so can't hurt. First boot will take awhile; patience is a virtue.
Got Xposed working now with gravitybox and edge in full effect so this stock ROM is now much more tolerable. I guess I had the wrong version of Xposed installer and didn't wait long enough for boot to finish.
It broke safetynet though which I fully expected. I'd rather use the systemless Xposed magisk module so I can pass safetynet but I can't get any magisk modules to install successfully either through magisk or by flashing with TWRP. Apparently I'm not the only one having this issue either and it doesn't look like anyone has found a fix for it as of yet. I guess for now I'll have to live without Pokemon go lol
AMShiech said:
Got Xposed working now with gravitybox and edge in full effect so this stock ROM is now much more tolerable. I guess I had the wrong version of Xposed installer and didn't wait long enough for boot to finish.
It broke safetynet though which I fully expected. I'd rather use the systemless Xposed magisk module so I can pass safetynet but I can't get any magisk modules to install successfully either through magisk or by flashing with TWRP. Apparently I'm not the only one having this issue either and it doesn't look like anyone has found a fix for it as of yet. I guess for now I'll have to live without Pokemon go lol
Click to expand...
Click to collapse
Well yes there is most definitely a fix. Your problem is the f2fs loopback bug. Your solution is the f2fs loopback bug workaround module. It's in the magisk manager app. Download there, but install it in twrp. Then magisk modules will work. You must have halted your research a little early because this is well known, and posted in many places.
You still won't pass safetynet with systemless Xposed. Which a little reading would have also revealed. But, you can turn off Xposed in magisk , then reboot and pass safetynet. Do whatever it is you need safetynet for, then turn it back on and reboot. You must completely uninstall the Xposed you have to use magisk Xposed. You must use the Xposed installer APK that's linked in Xposed for magisk so it recognizes systemless Xposed. So uninstall Xposed with uninstaller zip, uninstall Xposed APK. Wipe caches. Then you can just go in magisk manager, scroll to the bottom of downloads, install Xposed sdk 25 module. Also Xposed installer APK linked 8n the readme that pops up when you click the Xposed module in magisk downloads. See screenshots below.
Also, there is more to pogo than safetynet. There is an entire thread devoted to it (more than one) in the magisk section of the forum.
You have a bit of reading to do in order to do the things you want. It's all very easy to find. You don't seem to be looking very hard.
madbat99 said:
Well yes there is most definitely a fix. Your problem is the f2fs loopback bug. Your solution is the f2fs loopback bug workaround module. It's in the magisk manager app. Download there, but install it in twrp. Then magisk modules will work. You must have halted your research a little early because this is well known, and posted in many places.
You still won't pass safetynet with systemless Xposed. Which a little reading would have also revealed. But, you can turn off Xposed in magisk , then reboot and pass safetynet. Do whatever it is you need safetynet for, then turn it back on and reboot. You must completely uninstall the Xposed you have to use magisk Xposed. You must use the Xposed installer APK that's linked in Xposed for magisk so it recognizes systemless Xposed. So uninstall Xposed with uninstaller zip, uninstall Xposed APK. Wipe caches. Then you can just go in magisk manager, scroll to the bottom of downloads, install Xposed sdk 25 module. Also Xposed installer APK linked 8n the readme that pops up when you click the Xposed module in magisk downloads. See screenshots below.
Also, there is more to pogo than safetynet. There is an entire thread devoted to it (more than one) in the magisk section of the forum.
You have a bit of reading to do in order to do the things you want. It's all very easy to find. You don't seem to be looking very hard.
Also I certainly hope that's not the app I think it is (the smiley face)? You're not allowed to promote or speak of that "warez" here. So screenshot is not a great idea.
Click to expand...
Click to collapse
I'm well aware that the problem is f2fs loopback but due to the bug I'm unable to install the fix. Can't install magisk modules so a fix in the form of a magisk module doesn't really help me. Ive tried installing it with TWRP a couple times with no success. As far as PoGo I've actually never even played that game. Was just curious about it.
And I'm not sure what app you're referring to but that "wow" face is a chrome shortcut. Changed it cuz I didn't like the default grey square.
AMShiech said:
I'm well aware that the problem is f2fs loopback but due to the bug I'm unable to install the fix. Can't install magisk modules so a fix in the form of a magisk module doesn't really help me. As far as PoGo I've actually never even played that game. Was just curious about it.
Click to expand...
Click to collapse
Trend continues; reread post you're disparaging. Or module OP. f2fs loopback 'fix' gets flashed in twrp or via fastboot (for the adventurous).
I edited my post shortly after your quote. Tried installing with TWRP more than once. Doesn't show up in magisk modules.
Just flashed with fastboot and now it seems to have worked. Fastboot for the win.
Maybe all caps will help out
go inside magisk manager> downloads search F2FS LOOPBACK BUG WORKAROUND, FLASH INSIDE TWRP!!! WILL NOT WORK IF ATTEMPTED TO FLASH THROUGH MAGISK MANAGER!!!!