Bosion Android 10 PX6 - Voice commands ok google - Android Head-Units

Good morning I recently bought a Bosion radio in detail this : https://www.aliexpress.com/item/1005001596104751.html?spm=a2g0s.9042311.0.0.41e24c4d2S5wHT in addition to the various problems That I am trying to solve with the seller type canbus, camera and more, I would like to know if it is possible to activate voice coamandi via ok google I tried driving with mct dialer but it does not work my firmware is the latest 2021 version mcu STM32-20210109-11-BD6-56. Thank you to everyone who comes to my aid.

Related

Android 5.1.1 - Joying vs Eonon - Mazda 3 - 2004-2009

Hi all,
i want to buy one HU to my Mazda 3 (2006) and i would like if someone can explain me which one choose beetween these two models (or maybe another different model):
- EONON GA6151
- JOYING JY-ML001N2
From the technical point of view it seems like the Joying HU is better than eonon (2GB RAM) But i can not find some reviews from this concrete model and for eonon there are a lot of comments and reviews... so i don´t know what to do..
My main use will be:
- Music (bluetooth and radio)
- GPS (Waze, google maps, etc..)
- Handsfree calls... (Very important)
- Backup camera
- Original LDC of my mazda working as before installing the HU (Acc. to many Reviews with Eonon it will work)
Are both able to use "OK google" or "google now" voice commands? I have read that Joying is not able and Eonon i am not sure... And from the poing of view of "safety" i would like to have this options in my car.
Other problems i have read is that 1GB head units are very slow and people are uninstalling "Gapps"..
i would apreciete your answers!
Thanks very much in advance and have a nice weekend!
Ninf0 said:
Hi all,
i want to buy one HU to my Mazda 3 (2006) and i would like if someone can explain me which one choose beetween these two models (or maybe another different model):
- EONON GA6151
- JOYING JY-ML001N2
From the technical point of view it seems like the Joying HU is better than eonon (2GB RAM) But i can not find some reviews from this concrete model and for eonon there are a lot of comments and reviews... so i don´t know what to do..
My main use will be:
- Music (bluetooth and radio)
- GPS (Waze, google maps, etc..)
- Handsfree calls... (Very important)
- Backup camera
- Original LDC of my mazda working as before installing the HU (Acc. to many Reviews with Eonon it will work)
Are both able to use "OK google" or "google now" voice commands? I have read that Joying is not able and Eonon i am not sure... And from the poing of view of "safety" i would like to have this options in my car.
Other problems i have read is that 1GB head units are very slow and people are uninstalling "Gapps"..
i would apreciete your answers!
Thanks very much in advance and have a nice weekend!
Click to expand...
Click to collapse
Never go to 1Gb ram headunit ....
I have a 2gb Intel for my mazda cx5 and it goes fine.
Even mine is not joying (it is mtcd 2gb Intel while joying uses other type of mcu for their Intel units) they are similar.
If you want your LCD working you must ask for a can bus decoder compatible with your mazda
With respect to the Bluetooth calls...they work but you can't use Google now for calls...(either joying or other brands)
Thr Bluetooth are governed by the mcu ans not by the Android SO
Somebody could make it work by using table talk app (slightly modified the permission in order Google now could use it for calling)
Enviado desde mi D6603 mediante Tapatalk

New Android 7.1.1 PX3 Unit from BonRoad - Any Info or Feedback?

https://www.aliexpress.com/store/pr...32699671881.html?spm=2114.12010612.0.0.KbDCzA
The UI and other specs are very similar to the HotAudio test preview (thread here). Has anyone had a chance to get their hands on one of these yet? I'm deciding between this or a Joying unit.
Any input is appreciated!
PX3 RK3188 Android 7.1.1 DVD VW GPS 2G ram
Just received and installed this Head unit in my vw touran 2004.
It looks like the specifications are the same : https://fr.aliexpress.com/item/Pure...32582906631.html?spm=2114.13010608.0.0.UFTkAD
The unit is a Bonroad C1120801A4/A5 (RK3188 Android 7.1.1 Lecteur DVD de Voiture pour Octavia Fabia Praktik EOS GPS Navigation Avec 1024*600 HD 8 "
So far, i'm satisfied with the unit :
- Radio is now working and stable .RDS works fine (with the last DCMU update). (You need to put a double fakkra antenna plug to get the radio stable on vw cars)
- GPS IGo is fine but not in French, Waze great
- canbus is functional
- Wifi rear camera ok
- BT external micro (mono) installed, i need to shout/YELL (it is an issue...)
When calling, both mic works (front mic and ext. roof mic)
google voice research unusable
I'm waiting for documentation from the supplier as there were no instructions in the box.
Do not hesitate, if you need more informations, pictures and tests. :good:
I tried Kingo root but it failed.
I also bought a car radio on aliexpress similar to yours. Px3 cortex a9 for ford focus c-max.
I have exactly the same worries as you with the microphone, the one integrated in the facade I have to stick my mouth on and scream.
The one who plugs externally is the same thing.
Many people talk about a worry with frequencies that are not the same in china and here
300-3400 for china
50-7400 for others
If you can root your device you can change the frequencies with Pimp my rom.
Personally I can not root it.
Thanks for the feedback. What's the boot time on this thing? Does it have a sleep function similar to Joying units?
wankun said:
Thanks for the feedback. What's the boot time on this thing? Does it have a sleep function similar to Joying units?
Click to expand...
Click to collapse
About 15 to 20 seconds to boot. For sleep functions, I have nightlight or 15s 30s 1mns ect ...
I've the same unit but it doesn't detect OBDII adapter. Any solution?
After trying everything to get the microphone that works for the handsfree kit, I decided to cut the 4th leg of the bluetooth module and solder a mono microphone directly on it. This was my last option because I did not have the c32 connector. This has been a success. People hear me very well now.
I have ordered this one - https://www.aliexpress.com/item/4-C...32691433062.html?spm=a2g0s.9042311.0.0.MbBrvn. Waiting for the the item to arrive. The seller would ship it on 17 July 2017 (Monday).
---------- Post added at 07:14 PM ---------- Previous post was at 07:08 PM ----------
stanley 00 said:
I tried Kingo root but it failed.
Click to expand...
Click to collapse
Can you try the following and see if this gives you root access:
Goto factory settings and instead of typing 126 type *#hct#root#
This may give you temporary root access. Now you can install supersu or magisk to make the root permanent.
Note: I don't have this device or have not used any other Android HU; so I have not tried the steps mentioned above. I found this on the internet. Please try and let us know the result.
Cheers,
Rahul U S
Is your Bluetooth scanning OBDII with this ROM ?
S.Rahus
i tried your password to root but it does not work
" Goto factory settings and instead of typing 126 type *#hct#root# "
Stan
Anyone managed to fix the bad Bluetooth call quality? Any luck with getting root access?
Cheers,
Rahul U S
Hello, I bought this unit, but the 9-inch model without buttons and I do not use the search for voice, the free hands works perfectly for me, but for voice searches they do not work with the internal or external microphone.
Nor can I get programs with self-starting like the Radardroid service start only with the start of the radio, I have to manually activate it at each radio start.
I also have no rear camera, only parking sensors, and every time I put the reverse gear turns off the screen and the voice of the radio to try to connect to the back camera even if I do not have it, this did not happen with my previous radio with android 4.4, only with this new one with android 7.1.2.
Forsaken2703 said:
Hello, I bought this unit, but the 9-inch model without buttons and I do not use the search for voice, the free hands works perfectly for me, but for voice searches they do not work with the internal or external microphone.
Nor can I get programs with self-starting like the Radardroid service start only with the start of the radio, I have to manually activate it at each radio start.
I also have no rear camera, only parking sensors, and every time I put the reverse gear turns off the screen and the voice of the radio to try to connect to the back camera even if I do not have it, this did not happen with my previous radio with android 4.4, only with this new one with android 7.1.2.
Click to expand...
Click to collapse
(1) In the "Shutdown delay when ACC is off" do you have a new option named "Auto Sleep"?
(2) What is the MCU version you have?
Thanks in advance!
Cheers,
Rahul U S
s.rahus said:
(1) In the "Shutdown delay when ACC is off" do you have a new option named "Auto Sleep"?
(2) What is the MCU version you have?
Click to expand...
Click to collapse
Hello, I can not find the "Autosleep" option. My MCU is MTCD_XRC_V2.44_1
corolla E12 2din model
I have problems with the sound by hands free, to my listen very low, my unit is the MTCD_XRC_V2.54a_1 with android 7.1.2 ... is there any possibility to get down to version 5 of android?
Forsaken2703 said:
Hello, I can not find the "Autosleep" option. My MCU is MTCD_XRC_V2.44_1
Click to expand...
Click to collapse
are you 100% sure it's not there, first one from top?
i also have an XRC unit with 7.1.1 and MCU 2.44_1 and option is there...and working good.
[email protected] said:
Is your Bluetooth scanning OBDII with this ROM ?
Click to expand...
Click to collapse
zerozoneice said:
are you 100% sure it's not there, first one from top?
i also have an XRC unit with 7.1.1 and MCU 2.44_1 and option is there...and working good.
Click to expand...
Click to collapse
Try the latest XRC version 2.54. Please find the attachment.
zerozoneice said:
are you 100% sure it's not there, first one from top?
i also have an XRC unit with 7.1.1 and MCU 2.44_1 and option is there...and working good.
Click to expand...
Click to collapse
Well you're right, if I have the auto sleep option enabled, but programs like Radardroid can not start automatically with the radio, I always have to start them manually.
Hi everyone!
I have a similar unit.
I think that the problem is with android version. In our case 7.1.1.
I had a problem with my OBDII reader and I updated my unit to 7.1.2 and fix it
Now with 7.1.2 I have the same problem with microphone and also I have a problem with USB cameras. Only the DVR app can connect with but only the first time. If I close the DVR app and open it again, camera dont work.
I want to use the USB front camera with Mapillary and iOnRoad but I cant.
Any idea?
Where can I donwload a previos android version? for example 5.1.1 or 6 perhaps its would fix the problems.
Thanks!
I've had a Hizpo 7" no dvd with buttons mcu xrc 2.54 android 7.1.2 2gb 16gb for a week. Came this way so I can't say about previous versions.
My bluetooth microphones (both) work fine for me, calls hear me fine. Even just the internal mic seems good.
I haven't had any bluetooth connection problems.
Android does not see any microphone, there is no speech input in keyboard settings, google voice search hears nothing. Voice recorder apps hear nothing.
Tried a usb mic but that did nothing.
Can't get usb camera to work for DVR. RCA CVI cam works in DVR but doesn't record, does not work in FCAM app however, though rear does.
OBDII worked fine when I first tried it, haven't messed with it since.
Display clear and good.
Haven't seen any bog, even when running nav, audio, video etc.
Audio is so so, lots of noise. Radio reception seems great and RDS works too. Needs an amp.
Wifi reception is great, just a little antenna on the back.
I really like it but for the lack of voice search. It's really fast, I have a load of apps and still tons of space. Runs everything so far.
Nearly instant on, radio is playing in under 2 sec (probably 1).
GPS works good so far, finds my location in maybe 10 sec or less usually. I haven't been thru Pittsburgh yet to say how well it keep its signal.
I just got MTCtools and dialer and will start messing with them tomorrow, hopefully I can get a mic input to android and get voice working, then this will be really great!

android 8.1 head unit - xonrich branded

Firstly hello i am new to the forum
i have been searching the web about this ever since i purchased my android head unit (about a week ago) as i have issues i cant seem to get my head around.
The unit is branded up as XONRICH (CHINESE UNIT) its running oreo 8.1
i previously had the same unit in my other car with no issues how ever was running 7.1 android - the settings seem alot more accessible on the 7.1
so here are my issues if anyone could shed some light on this
1- The time when i set to automatic it is one hour fast even when set to time zone london
2 - the canbus keep forgetting the head unit and not working to turn on and off with key ,reverse cam loss and steering controls - all works again after reset - i here you can set canbus to 0 or faint to amend ?
3 i cant access factory settings to play with any of the above as it is not even listed in the menu ..
4. i can not seem to change the boot logo to a personalized upload
Hello, I have all those problem too with android 8.1 and also :
5 - cannot find accessibility settings to approved some apps like maps navigation or any app required to accept service (error service google play)
6 - brightness app is always automatic at boot (even if I untick auto)
I'm starting to think it's a bad deal
ric69 said:
Hello, I have all those problem too with android 8.1 and also :
5 - cannot find accessibility settings to approved some apps like maps navigation or any app required to accept service (error service google play)
6 - brightness app is always automatic at boot (even if I untick auto)
I'm starting to think it's a bad deal
Click to expand...
Click to collapse
me too ... i am sorry to hear you are having the same issues ... i do feel if i could access the factory settings i could probably fix most issues
is your unit also xonrich?
i was wondering if it is possible to flash 7.1 software on to the unit as it is so so much better to use
the manual they send does not match the 8.1 software it is for 7.1 as ive had both units maybe if we could lay our hands on an 8.1 based manual this would help ?
Yes it's bad story, my unit has no name :laugh: I posted here this morning :
https://forum.xda-developers.com/an...units/8227l-android-unit-8-1-chinese-t3905535
It's incredible to not find any combination to reboot into recovery, I tried all I think
The only acces is MCU Update but without any update ... it's difficult
I have instructions.pdf in system, but there is nothing very important
Mine loses qualizer settings if o turn of car or if i change volume
I am sorry to hear your issues . Maybe this brand unit is not ready for Android 8.1. I am owning ATOTO A6 Pro. It works great even though it is Android 6.0.
Mine is same through seicane website
I found a you tube video
sebwillcocks said:
Firstly hello i am new to the forum
i have been searching the web about this ever since i purchased my android head unit (about a week ago) as i have issues i cant seem to get my head around.
The unit is branded up as XONRICH (CHINESE UNIT) its running oreo 8.1
i previously had the same unit in my other car with no issues how ever was running 7.1 android - the settings seem alot more accessible on the 7.1
so here are my issues if anyone could shed some light on this
1- The time when i set to automatic it is one hour fast even when set to time zone london
2 - the canbus keep forgetting the head unit and not working to turn on and off with key ,reverse cam loss and steering controls - all works again after reset - i here you can set canbus to 0 or faint to amend ?
3 i cant access factory settings to play with any of the above as it is not even listed in the menu ..
4. i can not seem to change the boot logo to a personalized upload
Click to expand...
Click to collapse
Watch "how to enter into the factory settings Android 8.1 Car DVD GPS radio player" on YouTube
Go to YouTube and type in what is in qoutes. Pomah is the channel
Radio
Mgchata said:
Watch "how to enter into the factory settings Android 8.1 Car DVD GPS radio player" on YouTube
Go to YouTube and type in what is in qoutes. Pomah is the channel
Click to expand...
Click to collapse
I also own an Xonrich unit and the only problem I have is that when the radio tuner is working, the audios of other applications, for example radar announcers, do not sound, but if I turn off the tuner or put another audio source, including internet radio, TuneIn for example, these radar announcements are perfectly heard. The only thing they don't hear is with the radio tuner working.
I could not find the appropriate configuration to achieve it.
regards
Help and additional problems
sebwillcocks said:
Firstly hello i am new to the forum
i have been searching the web about this ever since i purchased my android head unit (about a week ago) as i have issues i cant seem to get my head around.
The unit is branded up as XONRICH (CHINESE UNIT) its running oreo 8.1
i previously had the same unit in my other car with no issues how ever was running 7.1 android - the settings seem alot more accessible on the 7.1
so here are my issues if anyone could shed some light on this
1- The time when i set to automatic it is one hour fast even when set to time zone london
2 - the canbus keep forgetting the head unit and not working to turn on and off with key ,reverse cam loss and steering controls - all works again after reset - i here you can set canbus to 0 or faint to amend ?
3 i cant access factory settings to play with any of the above as it is not even listed in the menu ..
4. i can not seem to change the boot logo to a personalized upload
Click to expand...
Click to collapse
Hi.
I also have some issues with the time on the unit being one hour fast, but after it's been on for a minute or two and GPS is fixed the time changes to the correct time.
Where did you buy your canbus for the unit? I have a Volvo V70 '04 which I want the steering wheel buttons to work with.
I'm also having trouble with the Bluetooth option missing in the settings list. Its only possible to pair the unit with Bluetooth trough the phone pair function on the unit. I really want to pair my OBD2 adapter to my unit but am unable to do so when there is no Bluetooth menu.
Is there a possible way to add this function to the unit trough a software upgrade or such?

Wondefoo - is google assistant work on it?

Hello,
i want to buy head unit for my VW T5 (dimension 189x117 mm) and i found on ali id: 32914397237. But in overview seller wrote this :
1. MIC of radio support BT phone function, however it do not support other voice function
of other app, such us "ok google","google map" and all others app voice function not support.
you can use app still ,only mic not work, in fact, in all market all radio have no such function too all time.
Click to expand...
Click to collapse
So please tell me is on Wondefoo head unit working google assistant or if not is there some ROM for it that makes it working?
I'v seen that on other units like "joying" - google assistant is working but only when you click microphone in app and even that is good option for me.
In the last resort maybe you know other head units with min RAM 4G and ROM 64G in dimension 189x117 mm with working Google Assistant even if you need to click microphone in app?
I hope that i wrote everything right - I'm from Poland so English is not my good site
Or this ISUDAR ali id: 33028047076
Wondefoo - works on all radios with built in microphone!

Bosion AC8257

Hi there!
I've bought a Bosion HU (4gb ram 64 rom chipset ac8257) and works really well compared to my previous unit (PX5 2gb ram). I've registered at 4PDA forum to get some information about software but I can't find too much info about this unit..Any experience with this kind of software? I get used to the PX5 units so now I'm completty lost about this new chipset.....MCU...
Link to my product
https://es.aliexpress.com/item/1005002120465337.html?spm=a2g0s.9042311.0.0.484463c0bL1okN
Thanks in advance.
hey. i know its an old thread but I ve got the bosion HU.., already followed the almost dead thread at 4PDA Forum also. This head unit is crap, honestly spoken, do you have an idea if there are alterntive firmwares maybe from other manufactures that would work with the boison units? my BT calling feature stopped working after last update what has been talked about at 4PDA also. In addition I do not like much the apprearnce of the start-screen and many other minor issues too... now I am in hope that somebody has found a good working alternatively firmware file that is way better than the boison one? sorry for my bad english..
Hi! Same situation on my side.....I've tried another Android units before and this one it's not bad....I've not found another compatible firmware....If you find something please post it
I've just purchased this ac8257 b200 unit and I'm NOT loving it. My px5 with frequent wifi dropouts is preferable.
Does anyone else have an issue with the accessibility downloaded services being disabled after a short period? I've added the apps to be excluded from Battery optimisation and ensured battery saver is off and even made the apps device admins if the app can be but within an hour the services are disabled.
Also, Google voice typing seems to be like the old android 6 version with the big grey rectangle covering the lower half of the screen while listening for voice input and if it fails because the internal mic is crap I can't get it to cancel to go back to the keyboard. I usually have to exit the app and relaunch it.
UPDATE: Apparently Duraspeed is a separate task manager/battery optimisation app that comes with these units. I've now tried turning that off as well as enabling it and adding the apps as exclusions and the downloaded services are still disabled after a short period.
Google Maps also runs much slower than my previous 4Gb px5 unit.
You have probably found this post already but I got an update for my unit here. https://forum.xda-developers.com/t/...with-android-11-android-auto-wireless.4467385
8257 / AC8257 / AC8257_DEMO Android 11 & Android 12 with MCU update​
8257 / AC8257 / AC8257_DEMO Android 11 & Android 12 with MCU update
So, I did some work and found Android 11 & Android 12 for the 8257 and both works, great. Along with the MCU update. The AC8257_Android_scatter.txt, found in both android files are known as project ac8257_demo, with platform MT6761. I have found...
forum.xda-developers.com
this could help

Categories

Resources