Hi
Respected Devolpers I Have Lenovo Z6 Pro 6GB 128GB Bootloader Unlocked
Twrp Recovery installed But When I Do Root With Megisk in Stock Rom Boot Logo Gone Hang But if Same I Do Root in Custom Rom Root Is Done But When I Put My Device in Diagnosed Mode And Restore QCN With QFil When QFil Say About Hard Rest My Phone Not Do Any Action I have tried Other imei Writing Tools And Imei Tool Show imei Write Pass Or Done But imei not change in my mobile phone and show it's privious default imei Plzz Guide On it Thank You So Much
Related
I am trying to flash my Lenovo a1000 G with stock firmware as I screwed up with imei no. in last flash long ago. I'm using sp flash too and scatter file to flash the firmware. My sim card is not detected and there is no phone app. When I am trying to flash, the progress bar goes red and completes 100 percent. But from then there is no progress(it does not load files to my tablet.). One more detail to add, I did not format my device. Should I format my device? If not what should I do?
if you format it you will lost imei dont do it
Opened a Telegram Channel for this mobile phone Lenovo A1000: https://t.me/LenovoA1000phone
Scenario:
K4 got stuck in bootloop during installing TWRP, So the ultimate solution I found was to flash the device so as to regain the default Lenovo Recovery and get the OS working.
Problem:
After this K4 successfully loaded the Stock ROM. But the IMEI file was flashed too. And I didn't created a back up of NVRAM files earlier.
Expectations:
I have to get a NVRAM file for Lenovo K4 Note, which I didn't found all over the shallow web. After which I can edit the IMEI Address in that file and get my device working.
Tried and tested solution will be good for my diet,
But all types of solution you find, do help.
A brother in need !
I messed up while flashing and now the IMEI numbers of my mobile are blank. Can anyone please send me a qcn backup file, so that i can restore my baseband.
Hi
Please i need help
I want to unlock bootloader and flash TWRP & Magisk on my realme 2 pro 4/64, after i flash all items, my phone was bootlop
Then i tried to relock bootloader, after that, my phone cannot boot and only showed this message.
"the current image(boot/recovery) have been destroyed and can not boot. Please flash the correct image or contact customer service to fix it"
how can i fix it?
note : i attached images of the problem, thats not my pictures, i save from the pther person who have the same problem. but i can find the best solution
thank you very much
flash stock recovery through fastboot. Then again install twrp custom recovery through fastboot. Then install stock zip rom by flashing through twrp. You can get stock recovery and stock rom from the following link.
https://forum.xda-developers.com/realme-3-pro/how-to/guide-to-stock-rom-stock-recovery-t3940604
fix
kisutbener said:
Hi
Please i need help
I want to unlock bootloader and flash TWRP & Magisk on my realme 2 pro 4/64, after i flash all items, my phone was bootlop
Then i tried to relock bootloader, after that, my phone cannot boot and only showed this message.
"the current image(boot/recovery) have been destroyed and can not boot. Please flash the correct image or contact customer service to fix it"
how can i fix it?
note : i attached images of the problem, thats not my pictures, i save from the pther person who have the same problem. but i can find the best solution
thank you very much
Click to expand...
Click to collapse
have you fixed?how
Bootloop please help asap!!
I was trying to install custom rom but I didn't took back up and wiped every thing on internal memory and also flashed stock recovery of realme 2 pro LOCKED the bootloader also I was hoping that I would be able to install stock rom by realme . But now am stuck at bootloop only realme logo appers
Basically I only have stock recovery on my phone and nothing else in the internal no OS installed bootloader is also locked so am not able to install twrp recovery to please help me install any rom .I am stucked due to lockdown no Service center is open. Please help asap??? I can't leave without my phone in this lockdown
davsagar4 said:
I was trying to install custom rom but I didn't took back up and wiped every thing on internal memory and also flashed stock recovery of realme 2 pro LOCKED the bootloader also I was hoping that I would be able to install stock rom by realme . But now am stuck at bootloop only realme logo appers
Basically I only have stock recovery on my phone and nothing else in the internal no OS installed bootloader is also locked so am not able to install twrp recovery to please help me install any rom .I am stucked due to lockdown no Service center is open. Please help asap I can't leave without my phone in this lockdown
Click to expand...
Click to collapse
Possible 100% solution, but it's paid.(800 inr)
In my case I'm fully locked (by vol down and power,vol up and power,both up down and power) i only see error..(no fastboot windows)
So to overcome this you need to pay someone some money (i paid 800,for oppo special I'd and password for 1 time),and download a compatible firmware (rom) and msm download tool in pc make sure you also have team viewer, as damn oppo won't allow you to flash firmware for free ad there is no crack for msmtool...hope this helps.. i also did this process during lockdown and learned a moral:-never relock bootloader
Qfil and other processes doesn't worked for me?
Don't wast time in crackes etc there is no official crack of realme 2 pro firmware bcoz there is always a different tool for each rom???..
I waited to fix this for 27 days.
davsagar4 said:
I was trying to install custom rom but I didn't took back up and wiped every thing on internal memory and also flashed stock recovery of realme 2 pro LOCKED the bootloader also I was hoping that I would be able to install stock rom by realme . But now am stuck at bootloop only realme logo appers
Basically I only have stock recovery on my phone and nothing else in the internal no OS installed bootloader is also locked so am not able to install twrp recovery to please help me install any rom .I am stucked due to lockdown no Service center is open. Please help asap
Click to expand...
Click to collapse
He_man_r35 said:
Possible 100% solution, but it's paid.(800 inr)
In my case I'm fully locked (by vol down and power,vol up and power,both up down and power) i only see error..(no fastboot windows)
So to overcome this you need to pay someone some money (i paid 800,for oppo special I'd and password for 1 time),and download a compatible firmware (rom) and msm download tool in pc make sure you also have team viewer, as damn oppo won't allow you to flash firmware for free ad there is no crack for msmtool...hope this helps.. i also did this process during lockdown and learned a moral:-never relock bootloader
Qfil and other processes doesn't worked for me?
Don't wast time in crackes etc there is no official crack of realme 2 pro firmware bcoz there is always a different tool for each rom???..
I waited to fix this for 27 days.
Click to expand...
Click to collapse
hey can you provide me that person's contact info?
This is How you can Flash a hard bricked Realme X2 Pro
Make sure you have efs or qcn backup from same phone..you may loss imei if doing full flash
Download this program https://forum.xda-developers.com/t/tool-rom2box-all-in-one-frp-flashing-unlocking-tool.4477349/
Run ROM2box.exe
Go to Oppo tab select Realme X2 Pro
under device type select ufs
locate extracted ofp folder under firmware flasher
Connect Phone in EDL Mod, once Port detected Click Download button, wait until success, it will take around 10Min..
Your browser is not able to display this video.
mark332 said:
This is How you can Flash a hard bricked Realme X2 Pro
Download this program https://forum.xda-developers.com/t/tool-rom2box-all-in-one-frp-flashing-unlocking-tool.4477349/
Run ROM2box.exe
Go to Oppo tab select Realme X2 Pro
under device type select ufs
locate extracted ofp folder under firmware flasher
Connect Phone in EDL Mod, once Port detected Click Download button, wait until success, it will take around 10Min..
View attachment 5709075
Click to expand...
Click to collapse
Hello, thanks a lot for this, could you send the link to the ROM that you are using here ? Thanks in advance !!
Does ROM2box.exe need .img files from system, vendor, etc, or are .dat files ok?
mark332 said:
This is How you can Flash a hard bricked Realme X2 Pro
Download this program https://forum.xda-developers.com/t/tool-rom2box-all-in-one-frp-flashing-unlocking-tool.4477349/
Run ROM2box.exe
Go to Oppo tab select Realme X2 Pro
under device type select ufs
locate extracted ofp folder under firmware flasher
Connect Phone in EDL Mod, once Port detected Click Download button, wait until success, it will take around 10Min..
View attachment 5709075
Click to expand...
Click to collapse
My X2 Pro dead after flashing failed in middle with this tool. Went to service centre, they flashed the firmware but lost IMIE and Baseband. Not able to recover till now
rkmadotra said:
My X2 Pro dead after flashing failed in middle with this tool. Went to service centre, they flashed the firmware but lost IMIE and Baseband. Not able to recover till now
Click to expand...
Click to collapse
Restore QCN or twrp backup, you can flash twrp on locked bootloader too, make sure back from same phone.. if flashing failed in middle check the error, it's a issue because of the file 'oppo' is missing in firmware you have to remove the correct line from rawprogram then you can reflash it..
mark332 said:
Restore QCN or twrp backup, you can flash twrp on locked bootloader too, make sure back from same phone.. if flashing failed in middle check the error, it's a issue because of the file 'oppo' is missing in firmware you have to remove the correct line from rawprogram then you can reflash it..
Click to expand...
Click to collapse
There was error sending patches to the device, comport not found something like that.
I restored twrp backup but nothing changed and QCN file i couldn't find anywhere. Can you please provide me that.
hi guys i need link efs or qcn backup for realme x2 pro Chinese version and my phone on latest update
what should i select under xml
Too bad this doesn't work, it has problems with ports.