I am trying to flash my Lenovo a1000 G with stock firmware as I screwed up with imei no. in last flash long ago. I'm using sp flash too and scatter file to flash the firmware. My sim card is not detected and there is no phone app. When I am trying to flash, the progress bar goes red and completes 100 percent. But from then there is no progress(it does not load files to my tablet.). One more detail to add, I did not format my device. Should I format my device? If not what should I do?
if you format it you will lost imei dont do it
Opened a Telegram Channel for this mobile phone Lenovo A1000: https://t.me/LenovoA1000phone
Related
I have a brother who was using the Lenovo a6000 , and I was using moto g 2014. I use to play games using my Sony ps3 controller(game pad) via otg. But his phone did not support USB otg, I don't know what he googled but unfortunately he flashed a Samsung kernel(boot.IMG) to his phone ,and as expected he had hard brick. We tried all the flashing tools to fix it and it didnt work .we gave it to the Lenovo authentic service centre , but they said it could be fixed. But when I plug it into my PC I see 30 new devices plugged in. Some are accessible but some are not. So then I thought these are the partitions of the Lenovo a6000, I used Linux reader i could access the system partition and even saw some files which were related to the phone and saw a partition named boot{20117f86-e985-4357-b9ee-374bc1d8487d} but it couldn't be mounted. so I thought if I could access that partition and copy the ramdisk and other files of Lenovo a6000(from the boot.img ) and make it boot up. So can any
one suggest me a way of fixing it or to access the boot partition.
Thanx in advance.
Use Qfil method
I think u can flash boot.img of stock A6000 rom by minimal adb and fastboot. If he flashed only boot.img then only the boot partition is gone. Did you flashed any custom recovery such as twrp or cwm?
need Emergency Help
I Have 2
Lenovo K50a40,, Tool DL Image Failed,, After Pattren Format, Via Volcano
ihava Flashed With This tree Files,, Butr Problem Still same,
Plz Helpppp
Hello mates, I have problem and I hope that someone can help me.
I have samsung sm-j5008 dual sim and someone messed about software. the phone memory was full and cpu rate terible.
I have tried with Odin but the phone didn't want to go to download mode. I have found so called clone with boot, recovery ana scatter files and flashed it with SP flash tool
now the pc recognize it and starts. wondershare mirror also shows picture buy the display does not show picture, the touch works.
DOes someone have original firmware or custom rom with recovey, boot. scatter files so I could flash it with SP flash tool?
pleasee....
Hello if you want original firmwares go there https://www.sammobile.com/firmwares/
Hello,
I have lenovo K4 vive A7010.
It stuck on the logo while booting.
I want to flash it using the sp flash tool.
Any body have a good firmware to use,
and know which rows I should untick while downloading the scatter file so as not to loose the data.
Thanks
Dear members, this is my first post and the problem is very complicted, so please bear with the long post
Device details:
LeEco Le1s (x500)
MTK6795 chipset
3 GB + 32 GB (Everybody knows )
Background:
I downgraded my ROM from 19s to 14s with SP Flash tool and the phone booted normally. I went through the initial setup, unlocked Developer mode and USB debugging. Then I opened the adb toolkit on Win 7 x86 machine to unlock bootloader and install twrp custom recovery at single go (instead of letting phone rebot after bootloader unlock and then proceeding with recovery flashing).
Now phone went to soft brick, to overcome which I needed to flash userdata with sp flash tool (I have done this in past also following a tutorial, the same files were used this time). But flashing process resulted in BROM error and I was not successful.
So, I re-flashed the original 14s rom via SP flash tool to get the things back to working, but phone didn't boot properly and bootloop situation was still there. I again reflashed the same ROM and this timephone entered red light of death mode, and didn't boot up after flashing original rom.
Now, I again googled this problem and found that we need to format flash with bootloader. Here the problem complicated further.
As soon as I formatted the flash and the bootloader, laptop stopped detecting the phone via usb cable. Now I can't flash any rom using SP flash tool as the phone is not detectable.
I have reinstalled my windows 7 32 bit operating system and reinstalled all the drivers for MTK smartphone. I have another Le1s phone running on 19s version of EUI marshmallow with stock recovery and locked bootloader which is detecting fine without problems.
Please guide me how can I resolve the problem.
Also guide if the other phone can anyhow help in this matter in terms of software backup for SP flash tool (I couldn't find a way of backing stock rom using SP flash tools.
Problem summary:
1) Flash with bootloader formatted
2) Phone is not detectable on Windows 7 32 bit OS and latest SP flash tools
3) Red LED turns on when phone connected to charger or laptop via usb cable,nothing on LCD display
4) Can't reach bootloader or recovery either
Help will be really appreciated. You all know the value of data stored on smartphones.
Thanks in advance!!
can explain how you were able to solve it?
facing a similar issue would ne helpful.
thanks.