Related
People need help. Sorry if'm posting in the wrong place, I'm new here.
I have a Moto X Play (XT1563) And after I flash it to the stock rom 6.0 he installed it right more at the time of restart he did not call more, no charges and no starts in fastboot.
The bootloader it was unlocked, and the battery was at 20% load.
When I plug it in the PC it is recognized as UNKNOWN DEVICE. What I do to try to recover it? as seen videos of people recovering MOTO G1 AND 2, MOTO X 1 and 2. Thank you in advance!
Rwaan said:
People need help. Sorry if'm posting in the wrong place, I'm new here.
I have a Moto X Play (XT1563) And after I flash it to the stock rom 6.0 he installed it right more at the time of restart he did not call more, no charges and no starts in fastboot.
The bootloader it was unlocked, and the battery was at 20% load.
When I plug it in the PC it is recognized as UNKNOWN DEVICE. What I do to try to recover it? as seen videos of people recovering MOTO G1 AND 2, MOTO X 1 and 2. Thank you in advance!
Click to expand...
Click to collapse
1st thing is please Charge your moto x play First ,it must be charged at least 50%
2nd I cant understand what u want to say .
So, Please calm Down and Explain It.
xpectedme094 said:
1st thing is please Charge your moto x play First ,it must be charged at least 50%
2nd I cant understand what u want to say .
So, Please calm Down and Explain It.
Click to expand...
Click to collapse
My bike x play does not turn over and not charge or enter the fastboot mode, I was in the custom rom RR 6.0 went back to the stock and the battery was only 20% used the following commands FlashFile file in cmd ...
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot reboot
* q in the last command is to restart it hung up and did not care anymore.
Rwaan said:
My bike x play does not turn over and not charge or enter the fastboot mode, I was in the custom rom RR 6.0 went back to the stock and the battery was only 20% used the following commands FlashFile file in cmd ...
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot reboot
* q in the last command is to restart it hung up and did not care anymore.
Click to expand...
Click to collapse
If its not charging then there might be problem in your Charging Jack.
First press power Button ( Around 10 sec ) When Screen Off Immediately press Power and Volume less Button.
Bootloader Mode opens .
Connect Your Charger and Check whether Charger Connected or Not ??
Now
I
Came To Your Question * q in the last command is to restart it hung up and did not care anymore. ??
When You Command " fastboot reboot " it hang up to " Bootloader unlock Screen" Its Because might be While Flashing TWRP You by mistakely Remove Your "Boot Image" and Thats Why your Mobile Hang Up.
You should Also Note That All Moto X Play dont have same Boot Image .
You First Need To Download Boot Image Flash It Then Your Problem will sohrtout For Sure.
xpectedme094 said:
If its not charging then there might be problem in your Charging Jack.
First press power Button ( Around 10 sec ) When Screen Off Immediately press Power and Volume less Button.
Bootloader Mode opens .
Connect Your Charger and Check whether Charger Connected or Not ??
Now
I
Came To Your Question * q in the last command is to restart it hung up and did not care anymore. ??
When You Command " fastboot reboot " it hang up to " Bootloader unlock Screen" Its Because might be While Flashing TWRP You by mistakely Remove Your "Boot Image" and Thats Why your Mobile Hang Up.
You should Also Note That All Moto X Play dont have same Boot Image .
You First Need To Download Boot Image Flash It Then Your Problem will sohrtout For Sure.
Click to expand...
Click to collapse
Yes, he hung up and did not care anymore. when I command "Fastboot reboot" he simply hung up and now does not care and neither starts in fastboot and also does not charge. It kind "put out the fastboot mode system" and is being recognized the computer as "unknown device" and has no way gives the flash rom stock because does not start in fastboot mode. He got hardbrick.
more where I download the boot image of it? 're Almost impossible to find a solution to this problem.
* Very need your help, Thank you!:crying:
Rwaan said:
Yes, he hung up and did not care anymore. when I command "Fastboot reboot" he simply hung up and now does not care and neither starts in fastboot and also does not charge. It kind "put out the fastboot mode system" and is being recognized the computer as "unknown device" and has no way gives the flash rom stock because does not start in fastboot mode. He got hardbrick.
more where I download the boot image of it? 're Almost impossible to find a solution to this problem.
* Very need your help, Thank you!:crying:
Click to expand...
Click to collapse
Try Flashing Firmware through RSD Lite ( Note RSD Lite Cant support Window 10)
and Please Give me Some more information .
1. Do Bootloader Mode Open or Not.
2. What Command You Exactly use when your cell Bricked .
and please reply fast.
xpectedme094 said:
Try Flashing Firmware through RSD Lite ( Note RSD Lite Cant support Window 10)
and Please Give me Some more information .
1. Do Bootloader Mode Open or Not.
2. What Command You Exactly use when your cell Bricked .
and please reply fast.
Click to expand...
Click to collapse
1. He does not enter the bootloader mode. You can not use RSD Lite to be able to give him the flash, the RSD does not recognize him because he does not enter the fastboot mode, moto x play he does nothing're completely off. when I connect the computer it is always recognized as "unknown device" so I can not give it flash or the cmd and not by RSD Lite.
2.I used all of the commands but did not pay attention had given error in any command more in the last it is simply reset the device he hung up and did not care anymore. Ai can not do anything it just know that he ta working as it appears on the computer when I connect it, the following NOTIFICATION ...
"USB Device Not Recognized,
* installing drivers ... failure.
* Unknown device. "
Every time I connect it to the computer appears such reports and have all the drivers installed and already uninstalled and installed back more not decided.
someone there gives me the file "bootloader singleimage.bin" Moto X Play (XT1563) and drivers "Qualcomm HS-USB qdloader 9008 (com12)" for me to recover my device a Hard Brick. Thanks in advance.
I have the same problem
Rwaan said:
someone there gives me the file "bootloader singleimage.bin" Moto X Play (XT1563) and drivers "Qualcomm HS-USB qdloader 9008 (com12)" for me to recover my device a Hard Brick. Thanks in advance.
Click to expand...
Click to collapse
I have the same problem, Can you send me the files? please. do you advance with the thing? (sorry for my poor english)
laloraptor said:
I have the same problem, Can you send me the files? please. do you advance with the thing? (sorry for my poor english)
Click to expand...
Click to collapse
I have the files that can fix my machine, since'm two months without any solution. I need the files to resurrect my Moto X Play With HardBrick.
Who has the files please makes a uploud and I send. My Gmail is [email protected].
thank you!
I have same problem, my moto x play is hard bricked and gets only detected as qdloader Q9008. I am looking for the blank flash files, something like prog_emmc_firehose_8939.mbn
i also have hard bricked ( Qloader 9008 )
Did someone find a solution? Mine is also hard bricked the exact same way.
hi there I am in the same situation! any solution? any ideas?
gilbertoperezx1 said:
hi there I am in the same situation! any solution? any ideas?
Click to expand...
Click to collapse
It can be revived either by Blank flash files or by easy jtag emmc flash.. Unfortunately no one is having blank flash files.. Hopefully someone will come up with a blank flash file.. If you want to fix it quicky, then only way is flashing emmc by easy jtag box.. Like the video below..
https://www.youtube.com/watch?v=t7ZzeRGOoEw&feature=youtu.be
Moto x play hard brick
Moto x play turned off after an update and did not turn on nor does it give a precise signal of the files BlankFlash for XT1563
alexmota00 said:
Moto x play turned off after an update and did not turn on nor does it give a precise signal of the files BlankFlash for XT1563
Click to expand...
Click to collapse
Its hard bricked and no blank files aren't working as of now.. We have started a telegram group of those who got their MXp's hard bricked.. You can join too if like.. Here is the link : https://t.me/Unbrick_MXP
i have the same problem hardbrick please send me file. my mail [email protected]
david livingstone said:
i have the same problem hardbrick please send me file. my mail [email protected]
Click to expand...
Click to collapse
There is no working files available as of now..
share to me please have the same problem
Have the same problems please share to me this files
[email protected]
Hi. I have soft-bricked my phone and when I turn it on it says "ERROR:Can't load invalid boot image!" then after finding some solutions here in xda, the fastboot boot boot.img method worked but whenever I restart my phone it keeps bringing the problem back to I need to fastboot boot it again.. Is it because my fastboot is not saving my work after restarting my phone? Any solutions for this? Thanks in advance!
binsz said:
Hi. I have soft-bricked my phone and when I turn it on it says "ERROR:Can't load invalid boot image!" then after finding some solutions here in xda, the fastboot boot boot.img method worked but whenever I restart my phone it keeps bringing the problem back to I need to fastboot boot it again.. Is it because my fastboot is not saving my work after restarting my phone? Any solutions for this? Thanks in advance!
Click to expand...
Click to collapse
Command:
Fastboot flash boot boot.img
binsz said:
Hi. I have soft-bricked my phone and when I turn it on it says "ERROR:Can't load invalid boot image!" then after finding some solutions here in xda, the fastboot boot boot.img method worked but whenever I restart my phone it keeps bringing the problem back to I need to fastboot boot it again.. Is it because my fastboot is not saving my work after restarting my phone? Any solutions for this? Thanks in advance!
Click to expand...
Click to collapse
Best solution is to flash AFT (service) firmware. PM me if you need instructions.
Muminek111 said:
Command:
Fastboot flash boot boot.img
Click to expand...
Click to collapse
yes I did that command but after restarting my phone, it keeps bringing back the problem
binsz said:
yes I did that command but after restarting my phone, it keeps bringing back the problem
Click to expand...
Click to collapse
Fastboot boot boot.img or fastboot flash boot boot.img. It's the difference.
So I tried to install the nougat update, but my phone, which has been booting to fastboot ever since I messed around a little with it on RSD Lite, will not turn all the way off and the Nougat update fails. I have tried several times. My bootloader is locked and I am running completely stock with the ads. It shows up in the boot logs as "fastboot reason: utag bootmode configured as fastboot" . Anyway to fix this so I can upgrade to nougat? Thank you.
enter into fastboot mode and run this
Code:
mfastboot oem fb_mode_clear
mfastboot reboot
lerg96 said:
enter into fastboot mode and run this
Code:
mfastboot oem fb_mode_clear
mfastboot reboot
Click to expand...
Click to collapse
Thank you so much. That fixed the problem!
Where did you find the nougat update ,my xt1625 prime is bricked and I need that to try unbrick it .
If anyone else reads this; I had the issue and I just selected reboot recovery so I could manually tell the phone to apply the update. When it booted into recovery, it actually continued to install it automatically.
Does anyone have a backup of boot and recovery images for nougat xt1625 amazon?
Sent from my Moto G (4) using Tapatalk
hmm
lerg96 said:
enter into fastboot mode and run this
Code:
mfastboot oem fb_mode_clear
mfastboot reboot
Click to expand...
Click to collapse
Does this command have to be run from a specific directory?
'mfastboot' is not recognized as an internal or external command.
Thanks
andnewb1 said:
Does this command have to be run from a specific directory?
'mfastboot' is not recognized as an internal or external command.
Thanks
Click to expand...
Click to collapse
You have to open the cmd in the folder where you have the fastboot and run fastboot or mfastboot depend or which version you r using .
andnewb1 said:
enter into fastboot mode and run this
Does this command have to be run from a specific directory?
'mfastboot' is not recognized as an internal or external command.
Thanks
Click to expand...
Click to collapse
You have to download this file and use CMD and go to the mfastboot directory and the run the commands.
I have used cynogenmod on my moto pure. After a while i have tried to turn it back to the stock rom following this thread: "https://forum.xda-developers.com/moto-x-style/development/firmware-moto-x-style-pure-stock-t3272486" and while doing so my phone has failed in the "fastboot flash bootloader bootloader.img" command. Now my device is soft bricked. It is stuck on boot loops.
I have tried going to fastboot by pressing the buttons but the phone only restarts, i have tried adb commands and fastboot commands but both don't recognize the device. my pc makes noise as it recognized my device yet i cant use adb nor fastboot. i suspect that while doing "fastboot flash bootloader bootloader.img" my bootloader was removed. how can i return it? please help.
I also read about using SP flash tool, but i'm having a hard time in getting the scatter loading file for the moto pure. I can't find it anywhere.
Thanks, Eden
What firmware did you use to flash your phone?
I always had good luck with Autoscript. Never failed me.
So your phone restarts, when you try to go on fastboot?
Sent from my Portable
PassatSport15 said:
What firmware did you use to flash your phone?
I always had good luck with Autoscript. Never failed me.
So your phone restarts, when you try to go on fastboot?
Sent from my Portable
Click to expand...
Click to collapse
Well i used Minimal ADB and Fastboot. which worked for me when i rooted the device and installed the cyno rom.
and yes. it just skips the fastboot. when i press vol down and power together my device shows the bootloader unlocked screen and then goes to the cyno loading screen and keeps there.
PassatSport15 said:
What firmware did you use to flash your phone?
I always had good luck with Autoscript. Never failed me.
So your phone restarts, when you try to go on fastboot?
Sent from my Portable
Click to expand...
Click to collapse
I just tried your autoscript and yet it is stuck on "waiting for device"
edenah said:
I just tried your autoscript and yet it is stuck on "waiting for device"
Click to expand...
Click to collapse
Can you send that script?
You should be able to see where the issue went wrong.
Is the bootloader unlocked? Take a shot of the phone, in fastboot mode.
Sent from my Portable
PassatSport15 said:
Can you send that script?
You should be able to see where the issue went wrong.
Is the bootloader unlocked? Take a shot of the phone, in fastboot mode.
Sent from my Portable
Click to expand...
Click to collapse
i must say. my device manager shows my android phone as a portable device "mtp usb device" and not as "other device" "android". so maybe thats why it cant find the device? Just to make you sure: i have installed the correct drivers for adb and fastboot, my brother's phone works with my pc.
and for the script you asked:
"@echo off
:WARNING
echo Created by ScardracS for the Moto X Pure.
echo I am not responsible for any damage, you're been warned!
echo You will be able to quit the installer simply press K on any question.
pause
:START
cls
echo Have You already installed ADB and Fastboot? (Yes/No/Kill the script)
set /p a=
if /i "%a%"=="Y" GOTO ROM
if /i "%a%"=="N" GOTO INSTALLER
if /i "%a%"=="K" GOTO END
echo Wrong Answer!
GOTO START
:INSTALLER
cls
echo This is the ADB and Fastboot's installer.
echo You have to install both ADB, Fastboot and Drivers.
echo It's better to install it System Wide.
pause
start adbinstaller.exe
pause
:ROM
cls
echo Have You already downloaded the Stock ROM? (Yes/No/Kill the script)
set /p b=
if /i "%b%"=="Y" GOTO STARTINSTALL
if /i "%b%"=="N" GOTO DOWNLOAD
if /i "%b%"=="K" GOTO END
echo Wrong answer!
GOTO ROM
OWNLOAD
cls
echo I'll open GitHub where You will be able to choose your preferred Stock version.
start https://firmware.center/firmware/Motorola/Moto X Pure (XT1575)/Stock/
echo WHEN THE DOWNLOAD IS FINISHED PLEASE UNZIP AND MOVE HERE ALL THE FILES.
pause
:STARTINSTALL
cls
echo Are You ready to intall STOCK ROM? (Yes/No/Kill the script)
set /p c=
if /i "%c%"=="Y" GOTO READY
if /i "%c%"=="N" GOTO START
if /i "%c%"=="K" GOTO END
echo Wrong answer!
GOTO STARTINSTALL
:READY
cls
echo Do you want to delete user data? (Yes/No/Kill the script)
set /p d=
if /i "%d%"=="Y" GOTO WIPE
if /i "%d%"=="N" GOTO NOWIPE
if /i "%d%"=="K" GOTO END
echo Wrong answer!
GOTO READY
:WIPE
cls
echo WIPE SUBSCRIPT
echo DO NOT STOP THE FLASHING PROCESS!!
adb reboot-bootloader
echo FOLLOW THE INSTRUCTIONS ON WATCH ME FOLDER AND THAN HIT ENTER
pause
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem fb_mode_clear
GOTO LOOK
:NOWIPE
cls
echo NOWIPE SUBSCRIPT
echo DO NOT STOP THE FLASHING PROCESS!!
adb reboot-bootloader
echo FOLLOW THE INSTRUCTIONS ON WATCH ME FOLDER AND THAN HIT ENTER
pause
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase customize
fastboot erase clogo
fastboot oem fb_mode_clear
:LOOK
echo Do you want to lock your device? (Yes/No)
set /p e=
if /i "%d%"=="Y" GOTO LOCK
if /i "%d%"=="N" GOTO END
echo Wrong answer!
GOTO READY
:LOCK
echo Locking device
fastboot oem lock
echo Device locked
:END
fastboot reboot
cls
echo Enjoy!
pause
"
and for the logcat:
"@echo off
:WARNING
echo This script is made and tested by me (ScardracS).
echo You can use and/or modify it, but please give me proper credit.
:START
echo.
echo Have You installed ADB? (Yes/No/Kill the script)
set /p a=
if /i "%a%"=="Y" GOTO LOGCAT
if /i "%a%"=="N" GOTO INSTALLER
if /i "%a%"=="K" GOTO END
echo Wrong Answer!
GOTO START
:INSTALLER
cls
echo I'll install ADB
echo Please install both ADB, Fatsboot and Drivers.
start adbinstaller.exe
pause
:LOGCAT
cls
echo Do you want to overwrite previous file? (Yes/No/Kill the script)
set /p b=
if /i "%b%"=="Y" GOTO OVER
if /i "%b%"=="N" GOTO NOVER
if /i "%b%"=="K" GOTO END
echo Wrong Answer!
GOTO LOGCAT
VER
cls
adb logcat > logact.txt
GOTO END
:NOVER
cls
adb logcat >> logcat.txt
:END
cls
pause
"
Never use a script to flash Moto firmware... Period, don't do it.
OP... What state is you phone in now? Can you get to the fastboot/bootloader screen?
acejavelin said:
Never use a script to flash Moto firmware... Period, don't do it.
OP... What state is you phone in now? Can you get to the fastboot/bootloader screen?
Click to expand...
Click to collapse
idk then how to flash the moto frimware... that all the web is about.
and i cannot. i cant get to fastboot not by buttons not by adb not by fastboot command. That is my problem. dont have recovey no nothing. my device just skips it all and sticks to the os loading screen.
right now its out of power. if i charge it and turn it on it will get stuck on boot loop for the cynogen.
edenah said:
idk then how to flash the moto frimware... that all the web is about.
and i cannot. i cant get to fastboot not by buttons not by adb not by fastboot command. That is my problem. dont have recovey no nothing. my device just skips it all and sticks to the os loading screen.
right now its out of power. if i charge it and turn it on it will get stuck on boot loop for the cynogen.
Click to expand...
Click to collapse
Plug it in and let it charge a while, then disconnect cable from phone. Plug USB end of cable into computer and hold both Volume buttons... Continue to hold them and connect USB to phone, the bootloader should appear.
The bootloader has to be there or you would never get the OS to start loading.
acejavelin said:
Plug it in and let it charge a while, then disconnect cable from phone. Plug USB end of cable into computer and hold both Volume buttons... Continue to hold them and connect USB to phone, the bootloader should appear.
The bootloader has to be there or you would never get the OS to start loading.
Click to expand...
Click to collapse
ok i got it he might have not factory reset aka hard reset while coming to stock and now he has overwritten the both cyno and stock over... i also had done same thing but didn't made my bootloader vanished
ps: if there is no bootloader then u even can't see the offline charging happening
acejavelin said:
Plug it in and let it charge a while, then disconnect cable from phone. Plug USB end of cable into computer and hold both Volume buttons... Continue to hold them and connect USB to phone, the bootloader should appear.
The bootloader has to be there or you would never get the OS to start loading.
Click to expand...
Click to collapse
well the fact i still have a bootloader is comforting at least.
but i have tried what you said. but when i charge my device it does a charging screen, and it keeps stuck on this screen, so when i try the button series it doesn't work. wish i could remove the battery...
* Well i have played with it for a while and made the screen off after it is charged. when i do what you said. i see that charging screen and then it disappears as like i launched to bootloader, yet there is no bootloader, after a few seconds the charging screen comes back, and then again there is a loop between the black screen and the charging screen.
Sagar_1401 said:
ok i got it he might have not factory reset aka hard reset while coming to stock and now he has overwritten the both cyno and stock over... i also had done same thing but didn't made my bootloader vanished
ps: if there is no bootloader then u even can't see the offline charging happening
Click to expand...
Click to collapse
i see a charging screen but i cant see the precentage of the battery. and even when i remove the charging it still stuck on that screen.
as long as the phone has battery the screen will be kept on . i cant enter fastboot since its allways open. cant turn the phone on as fastboot as it cant be turned off before that! or the screen stuck on loading cynogen or the screen stuck on the charging screen. Please help!
Press and hold Vol Dn + Power for 15-30 seconds... Anything?
acejavelin said:
Press and hold Vol Dn + Power for 15-30 seconds... Anything?
Click to expand...
Click to collapse
phone restarts. skips the fastboot and goes to cynogen loading screen.
it shows the bootloader unlocked screen and the next thing i see is cynogen.
well as acejavelin said i have a bootloader so i guess i should make it an other post about the fact i can't get too fastboot. Thanks all!
edenah said:
well as acejavelin said i have a bootloader so i guess i should make it an other post about the fact i can't get too fastboot. Thanks all!
Click to expand...
Click to collapse
Don't make another post. Just keep this one up as your problem is being addressed. It is just not what you anticipated.
Jessooca said:
If possible, can you borrow another phone or a camera and make a video of the phone rebooting, as well as you holding the buttons etc etc.... Anything more you can do, can help us help you.
Upload the video to YouTube and share the link if you can do that
Click to expand...
Click to collapse
well i will upload the video soon.
But i think i should explain it more.
my device can't get now into fastboot! i have tried using adb commands but the adb doesn't recognize the device. I have tried fastboot commands but again it doesn't recognize the device. I also tried button combinations, but it didn't work.
Until the incidence i have used to press the power button+ vol down keys to get into fastboot mode, but now it doesn't work. I suspect that it doesn't work since in order to get into fastboot with the button combination i need to first get the device turned off. But when i connect my device to the charger it shows the battery charging screen and the device is stuck on that screen even if it has disconnected from the charger, and it will keep on that screen until the battery has depleted. I have tried shutting it down using the power button but then my phone gets into a loop with the cyanogenmod loading screen, and even if i turn it off it restarts instead.
Jessooca said:
Leave your phone out until it's fully dead, battery is dead dead dead.... then hold down the proper button combo to get into fastboot (hold VOLUME DOWN & Power button until it boots into fastboot) I know you said you've tried this however, I am suggesting you let the phone fully die, and while holding that button combo plug the phone in (just keep on holding those buttons until it at least powers up; you'll have to wait a couple minutes as it won't boot without at least 1% battery) however this suggestion may work, then again, it may keep rebooting as you've stated previously.
Let us know how this goes tomorrow.
Click to expand...
Click to collapse
well. when i do what you said my device instead of getting to fastboot it gets turned of while charging, its a step up. But when i try the button combination for fastboot it doesn't get into fastboot.
No vid yet, bud?
Sent from my Portable
hi, I'm trying to root my p9 lite to use it to run a 3d printing server ( https://github.com/d4rk50ul1/klipper-on-android )
I tried some rooting apps but it was unsuccesful.
after researching I used potatoNV to change the bootloader code
and SKR Tools to unlock bootloader and install twrp but i couldn't acces twrp via the phone. i locked back the bootloader with skr tools and now i can't get back to android, the phone is stuck on the " your device has been unlocked and can't be trusted. your device is booting now... " page, i left it like this for the nignt and it's not booting. I can't turn it off, My pc is not seeing it when pluged and I unpluged the battery for ten minutes but it's doing the same after replugging it .
what can i do to repair, root and use it ?
KilianBLRD said:
i locked back the bootloader with skr tools and now i can't get back to android,
Click to expand...
Click to collapse
you can relock bootloader only on clean stock firmware. If you did this on a modded system (TWRP installed etc.) you probably bricked the phone.
-Alf- said:
you can relock bootloader only on clean stock firmware. If you did this on a modded system (TWRP installed etc.) you probably bricked the phone.
Click to expand...
Click to collapse
what does this mean and what can i do ?
KilianBLRD said:
what does this mean and what can i do ?
Click to expand...
Click to collapse
A. Try your luck with testpoint & board software (check unfamiliar terminology by google or xda.
The instructions do not perform, if you do not know what you're doing.)
B. Use "DC-Phoenix" (paid service) .
-Alf- said:
A. Try your luck with testpoint & board software (check unfamiliar terminology by google or xda.
The instructions do not perform, if you do not know what you're doing.)
B. Use "DC-Phoenix" (paid service) .
Click to expand...
Click to collapse
I'm new to that, can you eplain a bit more please ?
Try to connect phone to PC in fastboot mode, run commands:
in fastboot mode run commands :
fastboot oem get-build-number
fastboot oem get-product-model
fastboot getvar vendorcountry
fastboot oem oeminforead-CUSTOM_VERSION
fastboot oem oeminforead-SYSTEM_VERSION
and post the results.
Some might fail, so don't worry about it.
-Alf- said:
Try to connect phone to PC in fastboot mode, run commands:
in fastboot mode run commands :
fastboot oem get-build-number
fastboot oem get-product-model
fastboot getvar vendorcountry
fastboot oem oeminforead-CUSTOM_VERSION
fastboot oem oeminforead-SYSTEM_VERSION
and post the results.
Some might fail, so don't worry about it.
Click to expand...
Click to collapse
my pc is not seeing the phone
Maybe it's brick when you try to relock but it's still bootloader unlocked Don't worry
You can fix it with 4 method
1. Flashing with board firmware
2.fastboot flashing method
3.sd card upgrade method
4.usb upgrade method
KilianBLRD said:
my pc is not seeing the phone
Click to expand...
Click to collapse
i know but try the following:
press and hold the Power + Vol Down buttons for at least 10 sec and when the screen turns off, connect the USB cable to the phone.
-Alf- said:
i know but try the following:
press and hold the Power + Vol Down buttons for at least 10 sec and when the screen turns off, connect the USB cable to the phone.
Click to expand...
Click to collapse
What should I do next ?
KilianBLRD said:
What should I do next ?
Click to expand...
Click to collapse
https://forum.xda-developers.com/t/need-help-to-root.4571641/post-88366105
-Alf- said:
https://forum.xda-developers.com/t/need-help-to-root.4571641/post-88366105
Click to expand...
Click to collapse
But fastboot mode is not working
KilianBLRD said:
But fastboot mode is not working
Click to expand...
Click to collapse
Do I really have to repeat everything twice???
https://forum.xda-developers.com/t/need-help-to-root.4571641/post-88366083
Good luck!
-Alf- said:
Try to connect phone to PC in fastboot mode, run commands:
in fastboot mode run commands :
fastboot oem get-build-number
fastboot oem get-product-model
fastboot getvar vendorcountry
fastboot oem oeminforead-CUSTOM_VERSION
fastboot oem oeminforead-SYSTEM_VERSION
and post the results.
Some might fail, so don't worry about it.
Click to expand...
Click to collapse
it says waiting for device and nothing happen
KilianBLRD said:
it says waiting for device and nothing happen
Click to expand...
Click to collapse
to check that the connection to the computer in fastboot mode is established normally, type the command
fastboot devices
,the serial number of the phone should be displayed.
If not, you're not in fastboot mode.