Related
Evening fellas. Attempted to flash leoposas's Smooth thunder tonight, but ran into issues with the push step.
Trying to flash the boot and system img's fails, so I'm assuming push the zip via ADB.
Is this through Fastboot or -Download Mode-? Either way it's failing. In Fastboot No device is found when browsing adb. In Download Mode I've got undefined devices...that can be fixed if needs be...otherwise I won't worry about it.
wait...am I supposed to push while still in Recovery mode with the SDcard mounted?? Might make sense.
Thanks.
gtFlue said:
Evening fellas. Attempted to flash Mirroslav's Smooth thunder tonight, but ran into issues with the push step.
Trying to flash the boot and system img's fails, so I'm assuming push the zip via ADB.
Is this through Fastboot or -Download Mode-? Either way it's failing. In Fastboot No device is found when browsing adb. In Download Mode I've got undefined devices...that can be fixed if needs be...otherwise I won't worry about it.
wait...am I supposed to push while still in Recovery mode with the SDcard mounted?? Might make sense.
Thanks.
Click to expand...
Click to collapse
first, you can't "push" system.img and boot.img , you need to FLASH them in "fastboot" mode..
(adb will never show ur phone if it is in fastboot mode..)
(in fastboot mode..to detect phone enter : "fastboot devices"
not "adb devices"
to flash system.img and boot.img :
Code:
fastboot -w
fastboot flash boot.img
fastboot flash system.img
fastboot reboot
or, if you've got update.zip (romname.zip) then it can be flashed thru recovery , just copy rom to sdcard and then flash from recovery.
hope it helps out. if not .. use this tool : http://forum.xda-developers.com/showthread.php?t=1709619
Thanks Hani93. Trying to flash the boot and system img's failed. I'm currently using Miro's AOSP rom flashed via fastboot it's working pretty well with very few issues, cept I don't like the uber-short battery life with WiFi on. With out WiFi lasts forever and a day.
I'm guessing my issue stems from rebooting out of Recovery mode back into Fastboot when the instructions didn't say so. Once the zip is moved to sd card, apply updates from zip and should be good to go.
prob didn't help that when I let AIO toolkiit reboot my phone into ADB it was really still booting into fastboot, but since I didn't know enough about the differences I didn't know the two were not the same. Got that little issue resolved though.
I thought smooth thunder is a sorta dicriptionnnmn ain't name..it's..zooee
Sent from my LG-GT540 using Xparent ICS Tapatalk 2
Blake Blader said:
I thought smooth thunder is a sorta dicriptionnnmn ain't name..it's..zooee
Sent from my LG-GT540 using Xparent ICS Tapatalk 2
Click to expand...
Click to collapse
you should try to flash new mbn file (choose your size , what u want)(named as "resize system partition" in aio toolkit)
and then flash new clockworkmod recovery, and try again.
Ok, got things straightened out and Zoe Rom installed...let the testing begin. :laugh:
The aosp one is faster
Sent from my GT540 using Xparent ICS Tapatalk 2
gtFlue said:
Ok, got things straightened out and Zoe Rom installed...let the testing begin. :laugh:
Click to expand...
Click to collapse
:good:
instalado passo a passo, mas a ferramenta Aio tollkit da erro ao mudar o tamanho da partição, mas isso não é problema pois a partição ja esta com 200 mb usando ferramenta de pcfighter, mas mesmo assim não funciona o Wifi, o que deve ser?
fabrats said:
instalado passo a passo, mas a ferramenta Aio tollkit da erro ao mudar o tamanho da partição, mas isso não é problema pois a partição ja esta com 200 mb usando ferramenta de pcfighter, mas mesmo assim não funciona o Wifi, o que deve ser?
Click to expand...
Click to collapse
speak english please
andreas__ said:
speak english please
Click to expand...
Click to collapse
Google translate please!
Inviato dal mio LG-GT540 con Tapatalk 2
fabrats said:
instalado passo a passo, mas a ferramenta Aio tollkit da erro ao mudar o tamanho da partição, mas isso não é problema pois a partição ja esta com 200 mb usando ferramenta de pcfighter, mas mesmo assim não funciona o Wifi, o que deve ser?
Click to expand...
Click to collapse
try different roms , example : miros cm7
Footsteps installed, but a TOOL TO Aio tollkit of error if you change the partition size, but this is no problem POIs a partition already using THIS TOOL WITH 200 mb of PCfighter but STILL NOT Wifi Works, What You MUST be ?
Sorry for the bad english
Hey guys,
i've a massive problem with my G4. Today i flashed TWRP on the device, after i was unlocking the bootloader. After booting up into TWRP, and installing SuperSU, I just restarted it. Now it's dead. Seriously, it's dead.
I can't start it at all. If I plug in a USB-Cable, i just see the LED Light. I've Windows, and at my Device Manager, the G4 is recognized as QHSUSB_BULK.
I saw a Thread for the Moto G (1th), and i'm pretty sure, that i can't to this like in this tutorial:
http://forum.xda-developers.com/moto-g/help/how-to-revive-hard-bricked-moto-g-t2833798
Is there any option, what i can do?
@Marwycy are you able to boot into bootloader and TWRP..?
Keep volume and power key pressed for about 2 minutes,
And then if you made any backup restore it, otherwise flash stock...
__Madddy said:
@Marwycy are you able to boot into bootloader and TWRP..?
Keep volume and power key pressed for about 2 minutes,
And then if you made any backup restore it, otherwise flash stock...
Click to expand...
Click to collapse
At first i wasn't but, i found a thread with a solution:
http://forum.xda-developers.com/moto-g4-plus/help/help-xt1642-hard-bricked-help-t3498943
Now i can boot into the Bootloader, i deleted TWRP with fastboot, to flash the stock firmware from the motorola support site.
But its not working yet.
After "fastboot flash -S 1900M system system.img" I just get the error: "cannot load system.img". If I just use "fastboot flash -S 1800 system system.img", fastboot is going to flash, but stopped with the error:"(bootloader) data size exceeds download buffer. The last error seems to be logical, the file is bigger than 1800MB..
I'll try to flash each files which are in the image.
Marwycy said:
At first i wasn't but, i found a thread with a solution:
http://forum.xda-developers.com/moto-g4-plus/help/help-xt1642-hard-bricked-help-t3498943
Now i can boot into the Bootloader, i deleted TWRP with fastboot, to flash the stock firmware from the motorola support site.
But its not working yet.
After "fastboot flash -S 1900" I just get the error: "cannot load system.img". If I just use "fastboot flash -S 1800 system system.img", fastboot is going to flash, but stopped with the error:"(bootloader) data size exceeds download buffer. The last error seems to be logical, the file is bigger than 1800MB..
Click to expand...
Click to collapse
Are you sure your downloaded firmware is correct with your phone model no. and carrier..?
For Flashing Stock,
Follow this thread, post 4 (restore to stock)
http://forum.xda-developers.com/moto-g4-plus/how-to/guide-newbie-resource-thread-t3386584
__Madddy said:
Are you sure your downloaded firmware is correct with your phone model no. and carrier..?
For Flashing Stock,
Follow this thread, post 4 (restore to stock)
http://forum.xda-developers.com/moto-g4-plus/how-to/guide-newbie-resource-thread-t3386584
Click to expand...
Click to collapse
I tried it, i can't open system.img at all. So i can't extract anything..
Marwycy said:
I tried it, i can't open system.img at all. So i can't extract anything..
Click to expand...
Click to collapse
System.img ???
Are you trying to flash "dumped system" ...??
It will not get flashed that way, you need to download complete firmware, download links are there on which link I provided first..
Download correct firmware and follow that guide..
__Madddy said:
System.img ???
Are you trying to flash "dumped system" ...??
It will not get flashed that way, you need to download complete firmware, download links are there on which link I provided first..
Download correct firmware and follow that guide..
Click to expand...
Click to collapse
Sorry, i was a bit confused because of this large list of commands:
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash system system.img_sparsechunk.4
mfastboot flash system system.img_sparsechunk.5
mfastboot flash system system.img_sparsechunk.6
mfastboot flash system system.img_sparsechunk.7
Click to expand...
Click to collapse
And i figured out, that it's not necessary. All I had to do ist following the official way by just using "fastboot system system.img" , with the Image from the officla Motorola website. My first file was corrupt, that was the problem.
Now my phone is working again
Thanks for help.
Marwycy said:
Now my phone is working again
Click to expand...
Click to collapse
For Rooting, don't flash zip directly,
Follow this guide, https://forum.xda-developers.com/moto-g4-plus/how-to/root-systemless-rooting-supersu-2-74-2-t3405772
Take BACKUP, if anything wrong then RESTORE it...
first upgrade to 7.0 bro then go ahead with rooting .
say me if want any help??
Sent from my Moto G4 Plus using Tapatalk
---------- Post added at 04:16 AM ---------- Previous post was at 04:11 AM ----------
http://cloud.tapatalk.com/s/586730a47ebfa/superuser.zip
on nougat .use this SuperSU file after flashing twrp 3.0.2.0 as before and install phh superuser from playstore
Sent from my Moto G4 Plus using Tapatalk
parth00790 said:
on nougat .use this SuperSU file after flashing twrp 3.0.2.0 as before and install phh superuser from playstore
Click to expand...
Click to collapse
Please, provide complete information, no root method is working on latest (official) Nougat, your half information can brick other's phone and can put them in trouble...
i have used with rooted nougat
just same method for Twrp
enable usb debugging and flash twrp using adb .
then flash superuser.zip provided in previous comment and install phh superuser from playstore .
you are done bro .
i have tried and working
Sent from my Moto G4 Plus using Tapatalk
moto g4 plus brick
can u please tell me where did u get moto g4 plus official stock rom.
and how do u flash into phone.
bro please give me full details :crying:
djsusant said:
can u please tell me where did u get moto g4 plus official stock rom.
and how do u flash into phone.
bro please give me full details :crying:
Click to expand...
Click to collapse
Calm down. Read this.
Wrong, delete please
Ayuda/Help
Hola me podrias ayudar tengo el moto g4 xt1621, lo que sucedio fue que estaba flasheando eol parche de seguridad de 7.0 no recuerdo si era de diciembre o de marzo pero cuando acabo le di en reboot system now pero no prendio mas, solo prende el led y la pc lo reconoce ya instale los drivers pero me da error quisiera saber si me podrias ayudar a fondo a recuperar mi moto g4, disculpa pero lo pongo en ingles y español pero no hablo ingles uso el traductor, ayudame porfavor
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Hello, you could help me I have the moto g4 xt1621, what happened was that it was full of eolo security patch 7.0 I do not remember if the era of December of March but when the reboot system finished now but I did not turn on anymore, just turn on the led And the pc recognizes it and install the drivers but it gives me error I would like to know if you could help me thoroughly to recover my bike g4, I apologize but I put it in English and Spanish but I do not speak English I use the translator, help me please
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
TioHenry said:
Hello, you could help me I have the moto g4 xt1621, what happened was that it was full of eolo security patch 7.0 I do not remember if the era of December of March but when the reboot system finished now but I did not turn on anymore, just turn on the led And the pc recognizes it and install the drivers but it gives me error I would like to know if you could help me thoroughly to recover my bike g4, I apologize but I put it in English and Spanish but I do not speak English I use the translator, help me please
Click to expand...
Click to collapse
Okay -
1)Firstly, what were you doing when you rebooted - were you installing an update? If so, do you remember what the update was (what number did it end in, for example)?
2)Have you tried holding the power button for 2 minutes? This may force a hard reboot and could break your device out of the state it's in.
3)When you plug your device into your computer, what is the device name that comes up (e.g. is it Moto G4 Plus in Device Manager>Portable Devices or Qualcomm HSUSB 9008 or similar)?
4)What error message did you get?
5)Is your device with an unlocked bootloader or locked bootloader?
echo92 said:
Okay -
1)Firstly, what were you doing when you rebooted - were you installing an update? If so, do you remember what the update was (what number did it end in, for example)?
2)Have you tried holding the power button for 2 minutes? This may force a hard reboot and could break your device out of the state it's in.
3)When you plug your device into your computer, what is the device name that comes up (e.g. is it Moto G4 Plus in Device Manager>Portable Devices or Qualcomm HSUSB 9008 or similar)?
4)What error message did you get?
5)Is your device with an unlocked bootloader or locked bootloader?
Click to expand...
Click to collapse
1) I do not remember well
2) I already tried it with volume down and power button plus the charger connected
3) When I connect it to the pc it is recognized by Qualcomm
4) I do not remember, since I have several
5) If you had the bootloader unlocked
TioHenry said:
1) I do not remember well
2) I already tried it with volume down and power button plus the charger connected
3) When I connect it to the pc it is recognized by Qualcomm
4) I do not remember, since I have several
5) If you had the bootloader unlocked
Click to expand...
Click to collapse
Okay, point 3 indicates that you perhaps need to try resetting your phone with a blankflash: you may wish to have a look at this post https://forum.xda-developers.com/showpost.php?p=71405834&postcount=23 Please read all the steps fully before proceeding if you choose to follow that post. I recall you've posted in the hard brick thread too, which has similar instructions, perhaps this may work.
I do not know if this will work, but it's worth a try.
HELP me
Can you give me the link of stock rom for Moto G4 XT1624
Hello everyone,
Today, while trying to update my phone to Oreo, I have bricked it, so here is the way to unbrick it, and reflash the software.
We'll use the files found here link
Download base, windows, and MHA (or your phone model) zip files, then unzip it to a folder. Be sure, that there are no spaces in the directory name.
Download firmware files, use Firmware Finder, or anything you chose, the only important thing is you have to have 3 zip files. If ready, place it to the HWOTA/update folder. Rename the files to update.zip,
update_data_public.zip, and update_all_hw.zip.
Run update.bat, and follow the instructions on screen
When it asks the update method, chose update from script folder. It will copy the files, flash the recovery, then start system update.
You should be good to go
Thanks for @mankindtw for the software.
Hello! I try to update to oreo and brick my phone, only acces fasrboot and erecovery but i have bootloader locked, i can use this method??
ferrthrash said:
Hello! I try to update to oreo and brick my phone, only acces fasrboot and erecovery but i have bootloader locked, i can use this method??
Click to expand...
Click to collapse
did you solve it ?
same problem here
ferrthrash said:
Hello! I try to update to oreo and brick my phone, only acces fasrboot and erecovery but i have bootloader locked, i can use this method??
Click to expand...
Click to collapse
I don't think he has a solution ... I also bricked my phone on kind of downgrade and reactivated my Nexus 6 and bought a camera replacement for my dear Nexus for ~10 Euro on eBay.
Sad that this great device (Mate9) is so hard to pull back into live. Compared to a good old Nexus' it's dangerous to play around.
RIP my mate 9 (locked bootloader also). bricked by android pie update.
Kind day
I can help with restoration of mate 9
write to my pm
geogsm_1 said:
Kind day
I can help with restoration of mate 9
write to my pm
Click to expand...
Click to collapse
tengo un mate 9 con error al instalar twrp no instala lo que sucedio es que tenia uno instlaco y le instale otro twrp encima del que tenia y quedo en fun 11 recovery img y error 2 load failed alguien sabe como solucionar esto tengo bootloader esta desbloqueado pero aun asi no logro instalar twrp porque siempre arroja el mismo error a pesar que en el cmd aparezca como ok pero al oprimir vol + y power no arranca
Deleted
I DO NOT RESPONSIBLE FOR ANY PROBLEM CAUSED.
1- unlock the bootloader (fastboot oem unlock-go or install nougat and dont let reboot)
2- install the usb driver of qualcomm
3- Turn off the phone in fastboot mode and give the command [fastboot oem edl]
the cell phone will turn off the screen. Wait for the computer to recognize the phone
4 - connect the cellphone to the computer usb, download the file [https://goo.gl/wtwgFY] extract and run the xiaomi_a1_blok_silme_EDL wait to finish.
5- download the nougat rom of August 7.8.23_7.1 [https://goo.gl/ps5op6] extract it and flash the miflash
6- After flashing the rom, unlock the bootloader again.
7- Download RB Soft [https://goo.gl/QoTJbS] Password: flashbd24
Open RB soft, click on login, on the "qualcomm" tab and place your imei1 and imei2 and put this file in "QCN" [https://goo.gl/N2ED5Y]
Then click "REPAIR".
Go back to the RB Soft folder and look for the file "injected.qcn", you will use it in the QPST.
8- on your mobile phone, dial *#*#717717#*#* then connect to your computer (put in developer and debug mode).
9- download and install qspt [https://goo.gl/cTcxfX] Then open the qpst configuration, it has to be like this (https://ibb.co/mXUOLc).
Then go to Starts Client / Software Download. Click the "restore" tab.
In "QCN File" look for the file "injected.qcn" that you had created before, click "start" and you're done. After you're done, restart your phone.
READY, CELLPHONE WITH IMEI.
THANKS MAN!, this post save mi Mi A1!, this is instrucctions in English.e
Thread cleaned.
Translation is in the second post.
Logan, XDA Moderator
Looks interesting. Download links are not working, can you refresh them please?
nougat flash problem
im fine with oreo but no imei, i cant revert back to nougat rom, always bootloop
sory for my bad english
edit: solved thank you for your guidline
Hi Guys am facin dis issues for a week..My MI A1 phone s continuously restarting..Jus 30 to 1 minutes its ON. I went to service center thy updated d software but d problem s not solved..thy r sayin der s no pblm in hardware too but Mi s not ready to replace d device too..In servics thy r estimating aroung 7k to solve t.. Really if its a software issue ??? Can u help u guys..I need to solve t..
Mpktherock said:
Hi Guys am facin dis issues for a week..My MI A1 phone s continuously restarting..Jus 30 to 1 minutes its ON. I went to service center thy updated d software but d problem s not solved..thy r sayin der s no pblm in hardware too but Mi s not ready to replace d device too..In servics thy r estimating aroung 7k to solve t.. Really if its a software issue ??? Can u help u guys..I need to solve t..
Click to expand...
Click to collapse
Continuously restart problem
persist partition repair
Sent from my Mi A1 using XDA Labs
Byramklc said:
Continuously restart problem
persist partition repair
Sent from my Mi A1 using XDA Labs
Click to expand...
Click to collapse
xiaomi_a1_blok_silme_EDL.exe dont work properly because of some error, edl mode port 9008
Hi,
Can you please update the links?
Thanks,
danswat said:
Não ME RESPONSABILIZO POR QUALQUER PROBLEMA CAUSADO.
1- desbloquei o bootloader
2- instale os driver usb qualquamm
3- desligue o celular em modo fastboot e dê o comando [fastboot oem edl]
o celular vai desligar a tela. Espere o computador reconhecer o celular
4- conecte o celular no usb do computador, faça o download do arquivo [https://goo.gl/wtwgFY] extraia e execute o xiaomi_a1_blok_silme_EDL espere terminar.
5- baixe a rom nougat de agosto 7.8.23_7.1 [https://goo.gl/ps5op6] extraia ela e dê flash pelo miflash
6- depois de dar flash na rom, desbloquei o bootloader novamente.
7- baixe o RB Soft [https://goo.gl/QoTJbS] Senha: flashbd24
Abra o RB soft, clique em login, na aba "qualcomm" e coloque seu imei1 e imei2 e coloque esse arquivo em "QCN" [https://goo.gl/N2ED5Y]
Depois clique em "REPAIR".
Volte na pasta do RB Soft e procure o arquivo "injected.qcn", você irá usar ele no QPST.
8- no seu celular, disque *#*#717717#*#* depois conecte no computador.
9- baixe e instale o qspt [https://goo.gl/cTcxfX] Depois abra o qpst configuration, tem que ficar assim (https://ibb.co/mXUOLc).
Depois vá em Starts Cliente/Software Download. Clique na aba "restore".
Em "QCN File" procure o arquivo "injected.qcn" que você havia criado antes, clique em "start" e pronto. Depois que acabar, reinicie o celular.
PRONTO, CELULAR COM IMEI.
Click to expand...
Click to collapse
if you want to downgrade the phone, I'll recommend you to unlock fastboot (fastboot oem unlock-go) then execute fastboot oem edl and execute xiaomi_a1_blok_silme_EDL after a minute, if the program stuck in around 3 minutes, force shutdown and restart fastboot again, then execute fastboot oem edl and open MiFlash and select tissot version 7.8 and flash it, when it finish it start cleanly, download the QPST in diag mode and restart then you'll have IMEI again and baseband but be carefull because if you update to oreo everything fail and you'll have bootloop.
PD. I bought a new Mi A1 and backup all the partitions and overwrite it in my old Mi A1, I found something interesting the IMEI isnt in modem_a, modem_b, modemst1, modemst2 and fsc, I compare the partitions of the new phone and the old one and are equals but It still appear IMEI unknown and baseband unknown, I downloaded the QPST and compare the partitions and it still equals so, the IMEI isnt in that partitions if you have bootloop boot TWRP and clean modemst1 and modemst2 (dd if=/dev/zero of=/dev/block/bootdevice/by-name/modemst1) restart and the phone starts again but without IMEI, that is strange.
PD. I have a copy of persist partition, change the .sn and put your serial number, edit wlan_mac.bin and put another MAC (minor dan FF) and to change the BT MAC go to persist/bluetooth/.bt_nv.bin and change the MAC (the mac is in backwards, the end to begin)
Sorry about my bad english.
CommandAir said:
Hi,
Can you please update the links?
Thanks,
Click to expand...
Click to collapse
https://forum.xda-developers.com/mi-a1/help/repair-imei-mi-a1-links-updated-t3756891
How to fix on mac?
What is password to this file :
Open RB soft, click on login, on the "qualcomm" tab and place your imei1 and imei2 and put this file in "QCN" [https://goo.gl/N2ED5Y]
??
flashbd24 does not work.
Mi 8se how is IMEI repiar
How is reapir IMEI
Hello,
Is anyone know how to install Unbranded (Unlock Version) firmware on Samsung Galaxy J7 Star (MetroPCS/T-Mobile) SM-J737T1 to SM-J737U?
I have tried this with J7 Prime SM-J727T1 with SM-J727U and it worked well but J7 Star failed with Odin flash.
SM-J737T J737TUVS3ARJ1
TO
SM-J737U J737UUES2ARK1
Click to expand...
Click to collapse
eManuka said:
Hello,
Is anyone know how to install Unbranded (Unlock Version) firmware on Samsung Galaxy J7 Star (MetroPCS/T-Mobile) SM-J737T1 to SM-J737U?
I have tried this with J7 Prime SM-J727T1 with SM-J727U and it worked well but J7 Star failed with Odin flash.
Click to expand...
Click to collapse
I am also looking for same solution. Please update if you succeeded. TIA
etool20 said:
I am also looking for same solution. Please update if you succeeded. TIA
Click to expand...
Click to collapse
I checked, with the new android update it is not possible for 2018 models.
Don't think the 2018 J7 is even exploitable/rootable yet. (waiting for it though)
interesting of this device has treble support
hello I used firmware combination J737T1UVU4ASB1 for j737t1, flash with miracle box and I see that I think OEM Unlock to enable it, I have not yet enabled.
now that it has combination I am thinking of converting j737t1 to j737u with OEM enabled I hope it works.
here is the capture: https://www.mediafire.com/folder/msm2fczpgcxgu/
Could I get you to please host J737T1UVU4ASB1 out there somewhere? I can't find that one anywhere.
You have to flash the combination file and then enable OEM and then flash the unbranded rom and then factory reset in that order
Raymond702 said:
You have to flash the combination file and then enable OEM and then flash the unbranded rom and then factory reset in that order
Click to expand...
Click to collapse
Did this work? Is it possible to root SM_J737T1?
Over a year later...any feedback from anyone?? Does this work or any other options to root the T1 variant?
I rooted my j737u by using a combo file to get OEM unlock, reflashed firmware, installed magisk, patched boot img I got from AP firmware, then used a tool called tar-tool to convert boot img back to tar.md5, then placed the boot.tar.md5 file in AP section of patched odin and it flashed just fine. Makes you factory reset but magisk is there when rebooted.
r1pp3d2 said:
Rooteé mi j737u usando un archivo combinado para obtener el desbloqueo OEM, actualicé el firmware, instalé magisk, parcheé la imagen de arranque que obtuve del firmware AP, luego usé una herramienta llamada tar-tool para convertir la imagen de arranque nuevamente a tar.md5, luego coloqué el archivo boot.tar.md5 en la sección AP de odin parcheado y brilló muy bien. Te hace restablecer los valores de fábrica, pero magisk está allí cuando se reinicia.
Click to expand...
Click to collapse
Hello, can you be more specific with the steps, the combination of roms is interesting
find your bootloader version combination file and put it in the AP slot in odin and flash it.
it should say factory binary when it boots up. go to settings and enable dev options and the OEM unlock should be able to be turned on. after turning OEM unlock on should turn OEM lock off.
after that you need to reflash your firmware in odin.
put magisk on the phone and I pulled the boot.img from the AP firmware with 7zip. use magisk to patch the boot.img. i found a tool on xda called tar-tool, which I used to put the patched boot.img into tar.md5 then flashed that boot.img in the AP slot of odin. you will have to factory reset after that flash, but magisk will be there when you're done setting your phone up. oh, and I used patched odin to do all the flashing. i hope this helps!
With this code that you enable, they gave it to me and they say that it solves that, activate debugging, put this code and that's it *#0808#
r1pp3d2 said:
I rooted my j737u by using a combo file to get OEM unlock, reflashed firmware, installed magisk, patched boot img I got from AP firmware, then used a tool called tar-tool to convert boot img back to tar.md5, then placed the boot.tar.md5 file in AP section of patched odin and it flashed just fine. Makes you factory reset but magisk is there when rebooted.
Click to expand...
Click to collapse
Where do you get these combination files for this?
X_shinobi.apk_X said:
Where do you get these combination files for this?
Click to expand...
Click to collapse
I believe I either got the combo file from easy-firmware or here.