Database Users

[HARD BRICK] Moto G4 hardbricked after flashing TWRP

Hey guys,
i've a massive problem with my G4. Today i flashed TWRP on the device, after i was unlocking the bootloader. After booting up into TWRP, and installing SuperSU, I just restarted it. Now it's dead. Seriously, it's dead.
I can't start it at all. If I plug in a USB-Cable, i just see the LED Light. I've Windows, and at my Device Manager, the G4 is recognized as QHSUSB_BULK.
I saw a Thread for the Moto G (1th), and i'm pretty sure, that i can't to this like in this tutorial:
http://forum.xda-developers.com/moto-g/help/how-to-revive-hard-bricked-moto-g-t2833798
Is there any option, what i can do?

@Marwycy are you able to boot into bootloader and TWRP..?
Keep volume and power key pressed for about 2 minutes,
And then if you made any backup restore it, otherwise flash stock...

__Madddy said:
@Marwycy are you able to boot into bootloader and TWRP..?
Keep volume and power key pressed for about 2 minutes,
And then if you made any backup restore it, otherwise flash stock...
Click to expand...
Click to collapse
At first i wasn't but, i found a thread with a solution:
http://forum.xda-developers.com/moto-g4-plus/help/help-xt1642-hard-bricked-help-t3498943
Now i can boot into the Bootloader, i deleted TWRP with fastboot, to flash the stock firmware from the motorola support site.
But its not working yet.
After "fastboot flash -S 1900M system system.img" I just get the error: "cannot load system.img". If I just use "fastboot flash -S 1800 system system.img", fastboot is going to flash, but stopped with the error:"(bootloader) data size exceeds download buffer. The last error seems to be logical, the file is bigger than 1800MB..
I'll try to flash each files which are in the image.

Marwycy said:
At first i wasn't but, i found a thread with a solution:
http://forum.xda-developers.com/moto-g4-plus/help/help-xt1642-hard-bricked-help-t3498943
Now i can boot into the Bootloader, i deleted TWRP with fastboot, to flash the stock firmware from the motorola support site.
But its not working yet.
After "fastboot flash -S 1900" I just get the error: "cannot load system.img". If I just use "fastboot flash -S 1800 system system.img", fastboot is going to flash, but stopped with the error:"(bootloader) data size exceeds download buffer. The last error seems to be logical, the file is bigger than 1800MB..
Click to expand...
Click to collapse
Are you sure your downloaded firmware is correct with your phone model no. and carrier..?
For Flashing Stock,
Follow this thread, post 4 (restore to stock)
http://forum.xda-developers.com/moto-g4-plus/how-to/guide-newbie-resource-thread-t3386584

__Madddy said:
Are you sure your downloaded firmware is correct with your phone model no. and carrier..?
For Flashing Stock,
Follow this thread, post 4 (restore to stock)
http://forum.xda-developers.com/moto-g4-plus/how-to/guide-newbie-resource-thread-t3386584
Click to expand...
Click to collapse
I tried it, i can't open system.img at all. So i can't extract anything..

Marwycy said:
I tried it, i can't open system.img at all. So i can't extract anything..
Click to expand...
Click to collapse
System.img ???
Are you trying to flash "dumped system" ...??
It will not get flashed that way, you need to download complete firmware, download links are there on which link I provided first..
Download correct firmware and follow that guide..

__Madddy said:
System.img ???
Are you trying to flash "dumped system" ...??
It will not get flashed that way, you need to download complete firmware, download links are there on which link I provided first..
Download correct firmware and follow that guide..
Click to expand...
Click to collapse
Sorry, i was a bit confused because of this large list of commands:
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash system system.img_sparsechunk.4
mfastboot flash system system.img_sparsechunk.5
mfastboot flash system system.img_sparsechunk.6
mfastboot flash system system.img_sparsechunk.7
Click to expand...
Click to collapse
And i figured out, that it's not necessary. All I had to do ist following the official way by just using "fastboot system system.img" , with the Image from the officla Motorola website. My first file was corrupt, that was the problem.
Now my phone is working again
Thanks for help.

Marwycy said:
Now my phone is working again
Click to expand...
Click to collapse
For Rooting, don't flash zip directly,
Follow this guide, https://forum.xda-developers.com/moto-g4-plus/how-to/root-systemless-rooting-supersu-2-74-2-t3405772
Take BACKUP, if anything wrong then RESTORE it...

first upgrade to 7.0 bro then go ahead with rooting .
say me if want any help??
Sent from my Moto G4 Plus using Tapatalk
---------- Post added at 04:16 AM ---------- Previous post was at 04:11 AM ----------
http://cloud.tapatalk.com/s/586730a47ebfa/superuser.zip
on nougat .use this SuperSU file after flashing twrp 3.0.2.0 as before and install phh superuser from playstore
Sent from my Moto G4 Plus using Tapatalk

parth00790 said:
on nougat .use this SuperSU file after flashing twrp 3.0.2.0 as before and install phh superuser from playstore
Click to expand...
Click to collapse
Please, provide complete information, no root method is working on latest (official) Nougat, your half information can brick other's phone and can put them in trouble...

i have used with rooted nougat
just same method for Twrp
enable usb debugging and flash twrp using adb .
then flash superuser.zip provided in previous comment and install phh superuser from playstore .
you are done bro .
i have tried and working
Sent from my Moto G4 Plus using Tapatalk

moto g4 plus brick
can u please tell me where did u get moto g4 plus official stock rom.
and how do u flash into phone.
bro please give me full details :crying:

djsusant said:
can u please tell me where did u get moto g4 plus official stock rom.
and how do u flash into phone.
bro please give me full details :crying:
Click to expand...
Click to collapse
Calm down. Read this.

Wrong, delete please

Ayuda/Help
Hola me podrias ayudar tengo el moto g4 xt1621, lo que sucedio fue que estaba flasheando eol parche de seguridad de 7.0 no recuerdo si era de diciembre o de marzo pero cuando acabo le di en reboot system now pero no prendio mas, solo prende el led y la pc lo reconoce ya instale los drivers pero me da error quisiera saber si me podrias ayudar a fondo a recuperar mi moto g4, disculpa pero lo pongo en ingles y español pero no hablo ingles uso el traductor, ayudame porfavor
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Hello, you could help me I have the moto g4 xt1621, what happened was that it was full of eolo security patch 7.0 I do not remember if the era of December of March but when the reboot system finished now but I did not turn on anymore, just turn on the led And the pc recognizes it and install the drivers but it gives me error I would like to know if you could help me thoroughly to recover my bike g4, I apologize but I put it in English and Spanish but I do not speak English I use the translator, help me please
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

TioHenry said:
Hello, you could help me I have the moto g4 xt1621, what happened was that it was full of eolo security patch 7.0 I do not remember if the era of December of March but when the reboot system finished now but I did not turn on anymore, just turn on the led And the pc recognizes it and install the drivers but it gives me error I would like to know if you could help me thoroughly to recover my bike g4, I apologize but I put it in English and Spanish but I do not speak English I use the translator, help me please
Click to expand...
Click to collapse
Okay -
1)Firstly, what were you doing when you rebooted - were you installing an update? If so, do you remember what the update was (what number did it end in, for example)?
2)Have you tried holding the power button for 2 minutes? This may force a hard reboot and could break your device out of the state it's in.
3)When you plug your device into your computer, what is the device name that comes up (e.g. is it Moto G4 Plus in Device Manager>Portable Devices or Qualcomm HSUSB 9008 or similar)?
4)What error message did you get?
5)Is your device with an unlocked bootloader or locked bootloader?

echo92 said:
Okay -
1)Firstly, what were you doing when you rebooted - were you installing an update? If so, do you remember what the update was (what number did it end in, for example)?
2)Have you tried holding the power button for 2 minutes? This may force a hard reboot and could break your device out of the state it's in.
3)When you plug your device into your computer, what is the device name that comes up (e.g. is it Moto G4 Plus in Device Manager>Portable Devices or Qualcomm HSUSB 9008 or similar)?
4)What error message did you get?
5)Is your device with an unlocked bootloader or locked bootloader?
Click to expand...
Click to collapse
1) I do not remember well
2) I already tried it with volume down and power button plus the charger connected
3) When I connect it to the pc it is recognized by Qualcomm
4) I do not remember, since I have several
5) If you had the bootloader unlocked

TioHenry said:
1) I do not remember well
2) I already tried it with volume down and power button plus the charger connected
3) When I connect it to the pc it is recognized by Qualcomm
4) I do not remember, since I have several
5) If you had the bootloader unlocked
Click to expand...
Click to collapse
Okay, point 3 indicates that you perhaps need to try resetting your phone with a blankflash: you may wish to have a look at this post https://forum.xda-developers.com/showpost.php?p=71405834&postcount=23 Please read all the steps fully before proceeding if you choose to follow that post. I recall you've posted in the hard brick thread too, which has similar instructions, perhaps this may work.
I do not know if this will work, but it's worth a try.

HELP me

Can you give me the link of stock rom for Moto G4 XT1624

[GUIDE] How to unbrick your Mate 9 if you can access only fastboot

Hello everyone,
Today, while trying to update my phone to Oreo, I have bricked it, so here is the way to unbrick it, and reflash the software.
We'll use the files found here link
Download base, windows, and MHA (or your phone model) zip files, then unzip it to a folder. Be sure, that there are no spaces in the directory name.
Download firmware files, use Firmware Finder, or anything you chose, the only important thing is you have to have 3 zip files. If ready, place it to the HWOTA/update folder. Rename the files to update.zip,
update_data_public.zip, and update_all_hw.zip.
Run update.bat, and follow the instructions on screen
When it asks the update method, chose update from script folder. It will copy the files, flash the recovery, then start system update.
You should be good to go
Thanks for @mankindtw for the software.

Hello! I try to update to oreo and brick my phone, only acces fasrboot and erecovery but i have bootloader locked, i can use this method??

ferrthrash said:
Hello! I try to update to oreo and brick my phone, only acces fasrboot and erecovery but i have bootloader locked, i can use this method??
Click to expand...
Click to collapse
did you solve it ?

same problem here
ferrthrash said:
Hello! I try to update to oreo and brick my phone, only acces fasrboot and erecovery but i have bootloader locked, i can use this method??
Click to expand...
Click to collapse
I don't think he has a solution ... I also bricked my phone on kind of downgrade and reactivated my Nexus 6 and bought a camera replacement for my dear Nexus for ~10 Euro on eBay.
Sad that this great device (Mate9) is so hard to pull back into live. Compared to a good old Nexus' it's dangerous to play around.

RIP my mate 9 (locked bootloader also). bricked by android pie update.

Kind day
I can help with restoration of mate 9
write to my pm

geogsm_1 said:
Kind day
I can help with restoration of mate 9
write to my pm
Click to expand...
Click to collapse
tengo un mate 9 con error al instalar twrp no instala lo que sucedio es que tenia uno instlaco y le instale otro twrp encima del que tenia y quedo en fun 11 recovery img y error 2 load failed alguien sabe como solucionar esto tengo bootloader esta desbloqueado pero aun asi no logro instalar twrp porque siempre arroja el mismo error a pesar que en el cmd aparezca como ok pero al oprimir vol + y power no arranca

Repair IMEI My A1

Deleted

I DO NOT RESPONSIBLE FOR ANY PROBLEM CAUSED.
1- unlock the bootloader (fastboot oem unlock-go or install nougat and dont let reboot)
2- install the usb driver of qualcomm
3- Turn off the phone in fastboot mode and give the command [fastboot oem edl]
the cell phone will turn off the screen. Wait for the computer to recognize the phone
4 - connect the cellphone to the computer usb, download the file [https://goo.gl/wtwgFY] extract and run the xiaomi_a1_blok_silme_EDL wait to finish.
5- download the nougat rom of August 7.8.23_7.1 [https://goo.gl/ps5op6] extract it and flash the miflash
6- After flashing the rom, unlock the bootloader again.
7- Download RB Soft [https://goo.gl/QoTJbS] Password: flashbd24
Open RB soft, click on login, on the "qualcomm" tab and place your imei1 and imei2 and put this file in "QCN" [https://goo.gl/N2ED5Y]
Then click "REPAIR".
Go back to the RB Soft folder and look for the file "injected.qcn", you will use it in the QPST.
8- on your mobile phone, dial *#*#717717#*#* then connect to your computer (put in developer and debug mode).
9- download and install qspt [https://goo.gl/cTcxfX] Then open the qpst configuration, it has to be like this (https://ibb.co/mXUOLc).
Then go to Starts Client / Software Download. Click the "restore" tab.
In "QCN File" look for the file "injected.qcn" that you had created before, click "start" and you're done. After you're done, restart your phone.
READY, CELLPHONE WITH IMEI.
THANKS MAN!, this post save mi Mi A1!, this is instrucctions in English.e

Thread cleaned.
Translation is in the second post.
Logan, XDA Moderator

Looks interesting. Download links are not working, can you refresh them please?

nougat flash problem
im fine with oreo but no imei, i cant revert back to nougat rom, always bootloop
sory for my bad english
edit: solved thank you for your guidline

Hi Guys am facin dis issues for a week..My MI A1 phone s continuously restarting..Jus 30 to 1 minutes its ON. I went to service center thy updated d software but d problem s not solved..thy r sayin der s no pblm in hardware too but Mi s not ready to replace d device too..In servics thy r estimating aroung 7k to solve t.. Really if its a software issue ??? Can u help u guys..I need to solve t..

Mpktherock said:
Hi Guys am facin dis issues for a week..My MI A1 phone s continuously restarting..Jus 30 to 1 minutes its ON. I went to service center thy updated d software but d problem s not solved..thy r sayin der s no pblm in hardware too but Mi s not ready to replace d device too..In servics thy r estimating aroung 7k to solve t.. Really if its a software issue ??? Can u help u guys..I need to solve t..
Click to expand...
Click to collapse
Continuously restart problem
persist partition repair
Sent from my Mi A1 using XDA Labs

Byramklc said:
Continuously restart problem
persist partition repair
Sent from my Mi A1 using XDA Labs
Click to expand...
Click to collapse
xiaomi_a1_blok_silme_EDL.exe dont work properly because of some error, edl mode port 9008

Hi,
Can you please update the links?
Thanks,
danswat said:
Não ME RESPONSABILIZO POR QUALQUER PROBLEMA CAUSADO.
1- desbloquei o bootloader
2- instale os driver usb qualquamm
3- desligue o celular em modo fastboot e dê o comando [fastboot oem edl]
o celular vai desligar a tela. Espere o computador reconhecer o celular
4- conecte o celular no usb do computador, faça o download do arquivo [https://goo.gl/wtwgFY] extraia e execute o xiaomi_a1_blok_silme_EDL espere terminar.
5- baixe a rom nougat de agosto 7.8.23_7.1 [https://goo.gl/ps5op6] extraia ela e dê flash pelo miflash
6- depois de dar flash na rom, desbloquei o bootloader novamente.
7- baixe o RB Soft [https://goo.gl/QoTJbS] Senha: flashbd24
Abra o RB soft, clique em login, na aba "qualcomm" e coloque seu imei1 e imei2 e coloque esse arquivo em "QCN" [https://goo.gl/N2ED5Y]
Depois clique em "REPAIR".
Volte na pasta do RB Soft e procure o arquivo "injected.qcn", você irá usar ele no QPST.
8- no seu celular, disque *#*#717717#*#* depois conecte no computador.
9- baixe e instale o qspt [https://goo.gl/cTcxfX] Depois abra o qpst configuration, tem que ficar assim (https://ibb.co/mXUOLc).
Depois vá em Starts Cliente/Software Download. Clique na aba "restore".
Em "QCN File" procure o arquivo "injected.qcn" que você havia criado antes, clique em "start" e pronto. Depois que acabar, reinicie o celular.
PRONTO, CELULAR COM IMEI.
Click to expand...
Click to collapse

if you want to downgrade the phone, I'll recommend you to unlock fastboot (fastboot oem unlock-go) then execute fastboot oem edl and execute xiaomi_a1_blok_silme_EDL after a minute, if the program stuck in around 3 minutes, force shutdown and restart fastboot again, then execute fastboot oem edl and open MiFlash and select tissot version 7.8 and flash it, when it finish it start cleanly, download the QPST in diag mode and restart then you'll have IMEI again and baseband but be carefull because if you update to oreo everything fail and you'll have bootloop.
PD. I bought a new Mi A1 and backup all the partitions and overwrite it in my old Mi A1, I found something interesting the IMEI isnt in modem_a, modem_b, modemst1, modemst2 and fsc, I compare the partitions of the new phone and the old one and are equals but It still appear IMEI unknown and baseband unknown, I downloaded the QPST and compare the partitions and it still equals so, the IMEI isnt in that partitions if you have bootloop boot TWRP and clean modemst1 and modemst2 (dd if=/dev/zero of=/dev/block/bootdevice/by-name/modemst1) restart and the phone starts again but without IMEI, that is strange.
PD. I have a copy of persist partition, change the .sn and put your serial number, edit wlan_mac.bin and put another MAC (minor dan FF) and to change the BT MAC go to persist/bluetooth/.bt_nv.bin and change the MAC (the mac is in backwards, the end to begin)
Sorry about my bad english.

CommandAir said:
Hi,
Can you please update the links?
Thanks,
Click to expand...
Click to collapse
https://forum.xda-developers.com/mi-a1/help/repair-imei-mi-a1-links-updated-t3756891

How to fix on mac?

What is password to this file :
Open RB soft, click on login, on the "qualcomm" tab and place your imei1 and imei2 and put this file in "QCN" [https://goo.gl/N2ED5Y]
??
flashbd24 does not work.

Mi 8se how is IMEI repiar
How is reapir IMEI

Installation Problem - January Update 9.0

Hello y'all.
Today I received the update notification and I tried to install it. That's what I got in the attachment. Can anybody give me a light?

sergioricardojsj said:
Hello y'all.
Today I received the update notification and I tried to install it. That's what I got in the attachment. Can anybody give me a light?
Click to expand...
Click to collapse
You need to provide a bit of information about what you have done to your phone. Unlocked bootloader won't matter but any system changes.

kudos1uk said:
You need to provide a bit of information about what you have done to your phone. Unlocked bootloader won't matter but any system changes.
Click to expand...
Click to collapse
I've done nothing. My bootloader is locked. Nothing is changed.

sergioricardojsj said:
I've done nothing. My bootloader is locked. Nothing is changed.
Click to expand...
Click to collapse
Looking at your previous posts that is clearly not the case, good luck.

SOLVED! I flashed the same Stock ROM in the Fastboot Mode and tried to update again, it worked.

sergioricardojsj said:
SOLVED! I flashed the same Stock ROM in the Fastboot Mode and tried to update again, it worked.
Click to expand...
Click to collapse
can you share the rom you flashed please

ccalixtro said:
can you share the rom you flashed please
Click to expand...
Click to collapse
This one: https://drive.google.com/file/d/1Eorm8joRrDJnCgJtBR8cqWaHjGbmiFmK/edit
Steps:
Put your phone in fastboot mode
Open command prompt in the downloaded folder and type: "fastboot oem lock" and hold the VOL - for not erasing the data.
Go to the folder again and click in the _Flash_lock.bat - and then you wait until the process to end but be careful, you'll have to press VOL - again for not erasing data after automatic lock.
Boot your phone normally and try to update, good luck.

sergioricardojsj said:
This one: https://drive.google.com/file/d/1Eorm8joRrDJnCgJtBR8cqWaHjGbmiFmK/edit
Steps:
Put your phone in fastboot mode
Open command prompt in the downloaded folder and type: "fastboot oem lock" and hold the VOL - for not erasing the data.
Go to the folder again and click in the _Flash_lock.bat - and then you wait until the process to end but be careful, you'll have to press VOL - again for not erasing data after automatic lock.
Boot your phone normally and try to update, good luck.
Click to expand...
Click to collapse
thanks but i cant get into fastboot mode only blinking led.

sergioricardojsj said:
This one: https://drive.google.com/file/d/1Eorm8joRrDJnCgJtBR8cqWaHjGbmiFmK/edit
Steps:
Put your phone in fastboot mode
Open command prompt in the downloaded folder and type: "fastboot oem lock" and hold the VOL - for not erasing the data.
Go to the folder again and click in the _Flash_lock.bat - and then you wait until the process to end but be careful, you'll have to press VOL - again for not erasing data after automatic lock.
Boot your phone normally and try to update, good luck.
Click to expand...
Click to collapse
First, the rom is not from an official Xiaomi server. Next, the vol- button trick doesn't actually work since the next time you boot twrp, your user data will be erase. And the update failed on your phone because something on the system partition was changed or you booted into TWRP and set r+w permission.

barrack1 said:
First, the rom is not from an official Xiaomi server. Next, the vol- button trick doesn't actually work since the next time you boot twrp, your user data will be erase. And the update failed on your phone because something on the system partition was changed or you booted into TWRP and set r+w permission.
Click to expand...
Click to collapse
Hi, any alternative to solve this issue? I dont think the boot img or partition have been tempered because safetynet check and all my banking apps working fine

i have same problem, i was enable camera2 api for Gcam in my phone, by following tutorial in this forum, Using temporary twrp, unlock bootloader and lock back. And now i cant update with same problem in first post picture. Please someone give us solution for fix this. Thx

Sorry- ignore this message, wrong thread.

ltf_195 said:
Hi, any alternative to solve this issue? I dont think the boot img or partition have been tempered because safetynet check and all my banking apps working fine
Click to expand...
Click to collapse
You don't need to make any modifications, just mounting /system with rw in twrp will break ota.

barrack1 said:
First, the rom is not from an official Xiaomi server. Next, the vol- button trick doesn't actually work since the next time you boot twrp, your user data will be erase. And the update failed on your phone because something on the system partition was changed or you booted into TWRP and set r+w permission.
Click to expand...
Click to collapse
Dude, I'm just trying to help who wants help (I was in need before).
The ROM is not from the Official Website, I took it from a post here I don't remember which post. I'll search and drop it here.
The VOL - trick worked for me.
I never said I booted the TWRP, the phone was in fastboot all the time with .bat command executing the commands.
I'm here for future questions

Hola Sergio Ricardo, no entendí si es oem unlock o local y después los últimos pasos me perdí, podrías explicarlo en español?

sergioricardojsj said:
Dude, I'm just trying to help who wants help (I was in need before).
The ROM is not from the Official Website, I took it from a post here I don't remember which post. I'll search and drop it here.
The VOL - trick worked for me.
I never said I booted the TWRP, the phone was in fastboot all the time with .bat command executing the commands.
I'm here for future questions
Click to expand...
Click to collapse
I was just warning you that the trick as you put it will be nasty one when you or someone else who tries to follow get their phone wiped if they ever boot into twrp.

barrack1 said:
I was just warning you that the trick as you put it will be nasty one when you or someone else who tries to follow get their phone wiped if they ever boot into twrp.
Click to expand...
Click to collapse
He already said he has no TWRP installed and obviously if you're using OTA, you wouldn't have TWRP whilst updating
So does this mean you can't update to january if you have an unlocked bootloader? I had magisk installed in my device, restored image and downloaded the update but it shows installation error. Then after that, I flashed stock pie 9.0 via fastboot from someone who decompiled the payload from OTA and kept bootloader unlocked and tried to update but still it shows as installation error. I have no TWRP installed.

hola,si quieres restaurar la imagen stock para actualizar,as recovery PERO NO EN TWRP y monta la imagen desde ahí, reinicia y listo yo estoy con parche de noviembre que acabo de actualizar y antes de eso tenía magisk con Gcam y mods de audio espero les sirva
Mod edit google translate added:
hello, if you want to restore the stock image to update, as recovery BUT NOT IN TWRP and mount the image from there, restart and ready I am with November patch that I just updated and before that I had magisk with Gcam and audio mods I hope serve them

try n flash original pie fastboot rom from here
http://bigota.d.miui.com/V10.0.4.0....0.PDHMIXM_20190104.0000.00_9.0_2cee840c96.tgz

rexendz said:
He already said he has no TWRP installed and obviously if you're using OTA, you wouldn't have TWRP whilst updating
So does this mean you can't update to january if you have an unlocked bootloader? I had magisk installed in my device, restored image and downloaded the update but it shows installation error. Then after that, I flashed stock pie 9.0 via fastboot from someone who decompiled the payload from OTA and kept bootloader unlocked and tried to update but still it shows as installation error. I have no TWRP installed.
Click to expand...
Click to collapse
Having TWRP installed as the recovery and just booting into TWRP are 2 different things.

Redmi 7A bricked after MIUI 12 OTA update

Hi, my phone received the MIUI 12 update but now it's bricked because the installation stops after reaching 23.99%.
The bootloader is locked, so fastboot flash doesn't work. EDL mode also doesn't work because my Mi account isn't authorized.
Anyone with the same problem? How can I recover my phone?
Thanks.

First reboot your phone to stock recovery then there was an option to connect to Mi PC. The phone will be detected in adb mode then use mi unlocker to unlock the bootloader then you can flash your desired rom using MiFlash Tool

Dranrus said:
First reboot your phone to stock recovery then there was an option to connect to Mi PC. The phone will be detected in adb mode then use mi unlocker to unlock the bootloader then you can flash your desired rom using MiFlash Tool
Click to expand...
Click to collapse
Thanks for you answer. I can't go to stock recovery, it goes directly to the update screen. I boot to the fastboot mode and the phone is detected by the Mi Unlock Tool but it doesn't work. It says I should login with a Xiaomi account on the phone and do some steps, but the phone is bricked.

any updates I ahve same problem

I left it to update this morning and it just destroyed my phone completely destroyed it
I somehow got it to work using adb fastboot continue
then i did hard reset and it stuck on it too
can't go into recovery no matter what I do
It's like gone...

fixed it

Lo reparaste como lo insiste tengo el mismo problema a

David ddoramas said:
Lo reparaste como lo insiste tengo el mismo problema a
Click to expand...
Click to collapse
check thread I made

NikoWulf said:
comprobar hilo que hice
Click to expand...
Click to collapse
Hello, How?

so any final fix ?

Suryo75 said:
então, alguma correção final?
Click to expand...
Click to collapse
no fastboot mode de um (fastboot continue) ele iniciara com o sistema