i have a android headunit with a 4 pin microphone cable that is too short , can i get a new cable or adapter etc
Related
hi just purchased the uniway 9 inch 7.1.1 head unit but there is no manual with it ,can anyone tell me were the male usb cable goes thats coming out of back of unit in the wiring loom ,,,thank you
just an USB input... you dont need to hook it up to anything if not needed.
thanks
i have ordered the dab dongle ,it looks as if it has if its got a female usb input ,so would this usb from head plug into it ?
This is a Joying for a vw. Running android 8.
There is two usb connections at the back. Left and right.
The one marked 2.o (left one looking at the front) works with the DAB adapter and Zlink Apple car play. All is good.
Q1:
If i connect to the right usb the iphone then zlink wont connect. Why? (Im assuming its USB1.0) Can I use one of the zjinnova adapters to get carplay on this usb port?
Q2:
If i connect the DAB adapter to the right usb it works but the sound stutters enough for it to be annoying to listen to.
Anything i can do to help this? Im assuming its a data speed issue.
Q3:
Any tips on getting both DAB and Apple carplay to work?
Regards Kurt
I have what is hopefully a simple and straight forward question. I purchased this unit about 12 months ago https://www.aliexpress.com/snapshot...&orderId=87843158798481&productId=32807153130 and I have both a DVR USB Camera and DAB+ Module connected to the 2 USB ports on the rear of the unit.
It appears that one of the USB ports is faulty, so I can only get reliable DVR or DAB+ but not both. If I were to buy a small, simple USB Hub like this https://www.aliexpress.com/item/keb...-Splitter-Hub-Adapter-For-PC/32889011052.html, connected it to the working USB and then connected the USB Camera and DAB+ Module to the hub, would this work?
Thanks for reading!
I'm not certain if it works correctly on Android 6, but on my unit that has Android 8 i have a similar USB Hub connected that has a memory stick, the TPMS receiver and the receiver for a wireless keyboard, they all work correctly.
Taking into account how cheap a USB Hub is, i think it's worth checking it out.
Also, i managed to get one of the USB connectors into the glove compartment and connect the USB Hub into it, so the devices are easily accessible but not too visible.
Note, if you can take the unit out and send it to a service, they can probably fix the USB connector (the one that doesn't always work), it might have a loose connection, they sometime come loose and can be resoldered to the motherboard.
Also, if you open the unit and check the motherboard, some units have a 3rd internal connector that needs an adapter, not all of them though.
So I bought a CarPlay dongle from eBay. Installed AutoKit on my Eonon GA2170 8.0. CarPlay works fine and smooth except the charging. It doesn’t charge my phone as i think because of low power from my unit.
Anyway, I bought a powered USB hub and connected that hub between Carplay Dongle and Unit and connected it to my car cigarette lighter socket via adapter to get external power. It charges my phone now along with playing CarPlay but it doesn’t let shut down my head unit when i turn my car off. Head unit literally stays on until i remove that powered hub from cigarette light socket.
Not sure what’s happening. My cigarette lighter socket usually turns off when I turn off my car but in this case both head unit and socket keeps running.
Is the USB Hub also sending reverse power into the HU USB ?
Yes i think so. But I don’t understand why it’s getting input from it and why it doesn’t let 12V Cig socket turn off?
Anyone got any clue?
Hey guys
So my headunit that I put inside my 2004 E46 does not support Apple CarPlay from the start.
The unit runs android (10)
I bought a adapter and tried to install the app that It comes with but nothing… no signal.
So the issue seams so be that there is not enough power coming out of the USB port from the headunit.
When I use a splitter and plug the end for power into the lighter usb charger and the data one into the usb dongle it works no problem but it looks ****ty …
Any way or any adapter that I can get this fixed with?