Every time I boot my phone it goes to Android system recovery.
I'm trying to connect my phone with Odin to flash stock rom but I can't get my phone into download mode.
I press power button + VOL down + home button but it doesn't do anything, it just goes straight to recovery.
I should also note that my volume UP button doesn't function anymore.
Is there anything else I can attempt to save my device? Please help!
Thanks!!!
It may be a bootloader problem. Had something similar on another device and flashing the bootloader again helped.
You already gave your answer. Your volume up button is causing the problem. Fix it.
It's not software related.
You can buy a JIG on the web,this is a micro usb whithout a cable connected and cost 2 times nothing.
You shut down the phone put the JIG in the usb port and the device starts up in download mode,handy when you have problems with the volume rockers,like you do.
This works on all Galaxy devices,and everyone with a Galaxy should have this,i have it for years now and i could not whithout it.
http://galaxyworld.nl/usb-jig-download-reset-mode
Dear XDA friends,
i always hoped not to be one of those guys, who f****d up their phones to the point of no return. I really screwed up this time. Well, here I'am writing you about my screw up.
I unlocked, rooted, flashed and repaired all kinds of android phones in the past years, never without problems, but I could always fix it somehow. Not so much this time.
Now I'm stuck at Bootscreen with the Zuk logo. I even have problems pinging the phone via ADB.
Sorry for my noobish question guys. Any help would be much appreciated.
triby said:
Dear XDA friends,
i always hoped not to be one of those guys, who f****d up their phones to the point of no return. I really screwed up this time. Well, here I'am writing you about my screw up.
I unlocked, rooted, flashed and repaired all kinds of android phones in the past years, never without problems, but I could always fix it somehow. Not so much this time.
Now I'm stuck at Bootscreen with the Zuk logo. I even have problems pinging the phone via ADB.
Sorry for my noobish question guys. Any help would be much appreciated.
Click to expand...
Click to collapse
I got this translated from a chinese website:
For fastboot mode:
The phone turned off; keep the connection turned off the data cable to the computer, press: [volume down key] [Power Key] waiting to enter the fastboot mode.
For recovery:
Turn off the device
Press and hold Power key
When vibrates Volume UP key + Volume Down key about 10 seconds
Release all key when Android logo appear then you will see Android System Recovery
Use Volume key to select Menu
Use Power key to Confirm
Can you enter any of these 2 modes?
Life Engineer said:
I got this translated from a chinese website:
For fastboot mode:
The phone turned off; keep the connection turned off the data cable to the computer, press: [volume down key] [Power Key] waiting to enter the fastboot mode.
For recovery:
Turn off the device
Press and hold Power key
When vibrates Volume UP key + Volume Down key about 10 seconds
Release all key when Android logo appear then you will see Android System Recovery
Use Volume key to select Menu
Use Power key to Confirm
Can you enter any of these 2 modes?
Click to expand...
Click to collapse
thank you life engineer! No luck . I'll try to send it back. Thanks again for you're help. Much appreciated!
hi xda, i am facing thesame problem with my lenovo zuk z1 phone. its on a bootloop. i can enter the recovery by pressing both up and down vol. keys, i have wiped data/factory reset and wiped cache partition and rebooted but it doesnt fix.. I tried to reboot to bootloader but is stuck on fastboot mode screen. ive tried to search a solution but none have helped. The connection between phone via usb to computer only lasts like 2 secs. during boot then it disconnects again beacuse of the bootloop. Can anyone pls. help.
rusty96379 said:
hi xda, i am facing thesame problem with my lenovo zuk z1 phone. its on a bootloop. i can enter the recovery by pressing both up and down vol. keys, i have wiped data/factory reset and wiped cache partition and rebooted but it doesnt fix.. I tried to reboot to bootloader but is stuck on fastboot mode screen. ive tried to search a solution but none have helped. The connection between phone via usb to computer only lasts like 2 secs. during boot then it disconnects again beacuse of the bootloop. Can anyone pls. help.
Click to expand...
Click to collapse
How does the bootloop look like?
crian said:
How does the bootloop look like?
Click to expand...
Click to collapse
The bootloop is just showing the ''ZUK logo'' in the middle of screen and "'powered by Android logo'' below,and the phone vibrates everytime it flashes these logos. I tried QFIL but it can only detects the unit on the first boot or first flash that is 2 secs. only from the time i press the power button, and then it disconnects and not detect the unit again. Does anyone know where can i find the scatter file , MTK ROM for zuk z1, i would like to try the SP flasher tool. Or if anyone have any idea how to solve this issue on lenovo zuk z1,pls. help.tnx
Can y get to fastboot ?
im facing the same problem after i had the stupid idea to lock the bootloader again, before that i flashed the phone successfully with the cm mod recovery and cm 13.
Has anyone found a solution to this ? or do i have to send it back ?
What i did exactly :
I locked the bootloader again and just to test it i tried flashing the recovery again , ofcourse it didn't work which was what i wanted.
Afterwards i rebootet the bootloader with sudo fastboot -i 0x2b4c reboot
now im stuck in a bootloop that i cant even stop , in other words i cant turn my phone off nor can i access the recovery or fastboot
Im feeling so stupid that i locked it again .... i will try to get into recovery after my phone ran out of battery but so far it looks quite bad...does anyone know if i will get a replacement even though it was my fault ? ( i don't need to say that it was my fault ..and the bootloader is now locked again )
UPDATE::
I found a promising thread about this problem, i will report back here if i was successful.
-> forum.cyanogenmod.org/topic/121913-after-nighty-update-to-20160212-the-zuk-is-bricked-without-salvation/
CPP11 said:
UPDATE::
I found a promising thread about this problem, i will report back here if i was successful.
-> forum.cyanogenmod.org/topic/121913-after-nighty-update-to-20160212-the-zuk-is-bricked-without-salvation/
Click to expand...
Click to collapse
pressing Vol + & Vol - the connecting the USB cable entered bootloader mode. YEAH!!!!
Need some help
And after that what to do I can get it to recovery and the fastboot mod but after that what to do my phone like this for a month now
Any solution?!
did you solve it i have exactly the same problem for a month now as well (Exactly same situation) Please help
---------- Post added at 01:20 AM ---------- Previous post was at 01:08 AM ----------
Amen Ghazy said:
And after that what to do I can get it to recovery and the fastboot mod but after that what to do my phone like this for a month now
Click to expand...
Click to collapse
did you solve it i have exactly the same problem for a month now as well (Exactly same situation) Please help
Please help , same problem
I am facing same issue too from 2 days. I didnt even try to flash custom roms or play with boot loader or recovery or anything. All of a sudden my phone entered boot loop. After two three bootloops phone is entering "12 apps optimized of 230 apps" mode, completing optimizing all apps and then failing to start apps, entering boot loop again.
Effort made so far to fix -
1) Went to recovery and cleared cache - didnt work
2) Went to recovery and did factory reset - factory reset did happen but boot loop didnt stop, I realized that factory reset happened because now its saying optimizing 120 apps instead of my 230 apps during the bootloop.
3) Went to recovery, Entered fast boot mode but not able to connect to PC. Fastboot devices is not showing anything. I made sure proper driver is installed after researching on XDA.
4) Went to recovery, Tried "Install update". Didnt install anything but browsed through folder structure and realized my data is intact
It will be great if someone can help me atleast recover my data before I handover phone to service center for fixing boot loop issue.
Same problem
crian said:
How does the bootloop look like?
Click to expand...
Click to collapse
i have same problwm what to do plz help mme
Abhishekjain31291 said:
i have same problwm what to do plz help mme
Click to expand...
Click to collapse
Explain in detail
errecez1 said:
pressing Vol + & Vol - the connecting the USB cable entered bootloader mode. YEAH!!!!
Click to expand...
Click to collapse
The link is not accessible now. Can you let me know what you have done. My phone is in a boot loop now and showing only Logo and 'powered by Android' message. It keeps turning on and off again and again.
Guys when u are in fast boot mode .. pls install Twrp ... After insatlling that press power button abd vibration comes hold volum doen+volume up button at the same time ..
Then u will be getting recovery Twrp mode .. then connect it to pc and u will see internal srorage in pc...now u have to copy any rom to the phone and install it via Twrp ... Thats all
Sorry For Re-posting Here. This is Solution
Why this is happening ?
Due to Dirty Flash from Zui or from COS/CMOD but suddenly Bootloader gets locked
May be Due to Some Custom Rom which only works with Old Bootloader ( And you are on latest 2.5 Zui QPST Flash)
Reasons are many. I also did same mistake. I flashed ZUI 2.5 using QPST then unlock bootloader using official site installed twrp after wiping cache system and data , Installed Lineage 0S JAN Build then without rebooting installed Lineage Nightly build (Latest) with Gapps After rebooting Phone goes into Restart endless loop on ZUK Logo. Blink and Vibrate .. After 1hr I figured it out but its 5am So slept.
HOW TO FIX ENDLESS REBOOT ON ZUK Logo ?
-> Identity vibrate patterns (Press Power Key I count 6- 7 Vibration pattern ) After long Vibrate immediately remove finger from power key.
->Once its Done (Phone completely off)
Download QPST and Official COS QPST from this Link https://goo.gl/InWQji OR https://goo.gl/iqrnlI (I am personally Very Thankful to D tech Terminal for posting Wonderful video on Youtube https://www.youtube.com/watch?v=4Dl6JkAVpuM
<- please install all drivers and software.->) @ankurpandeyvns Thanks bro.
Main Task is here and Lots of Patience is required and You also need to be very Blazing fast to achieve this.
-Once you download and install Qpst open Qfil
-Now press Volume Up only and connect USB (Just press POWER KEY only for 1 sec It will vibrate and connect)
-Without waiting hit Download button.
-Voila It will start flashing your phone again and Hence Your phone is now Revive..
-Once Revive You can use it to again flash custom Rom or stick to stock Rom if you want.
Keep Flashing !!!
Patience is Key here. And Don't lose hope.
:good:
EDITED:
While connecting to pc and by pressing Volume key you also need to press Power key for 1 sec or 2 sec until it gets detected. Thanks addicted777 (for tip)
rajendra0072 said:
Sorry For Re-posting Here. This is Solution
Why this is happening ?
Due to Dirty Flash from Zui or from COS/CMOD but suddenly Bootloader gets locked
May be Due to Some Custom Rom which only works with Old Bootloader ( And you are on latest 2.5 Zui QPST Flash)
Reasons are many. I also did same mistake. I flashed ZUI 2.5 using QPST then unlock bootloader using official site installed twrp after wiping cache system and data , Installed Lineage 0S JAN Build then without rebooting installed Lineage Nightly build (Latest) with Gapps After rebooting Phone goes into Restart endless loop on ZUK Logo. Blink and Vibrate .. After 1hr I figured it out but its 5am So slept.
HOW TO FIX ENDLESS REBOOT ON ZUK Logo ?
-> Identity vibrate patterns (Press Power Key I count 6- 7 Vibration pattern ) After long Vibrate immediately remove finger from power key.
->Once its Done (Phone completely off)
Download QPST and Official COS QPST from this Link https://goo.gl/InWQji OR https://goo.gl/iqrnlI (I am personally Very Thankful to D tech Terminal for posting Wonderful video on Youtube https://www.youtube.com/watch?v=4Dl6JkAVpuM
<- please install all drivers and software.->) @ankurpandeyvns Thanks bro.
Main Task is here and Lots of Patience is required and You also need to be very Blazing fast to achieve this.
-Once you download and install Qpst open Qfil
-Now press Volume Up only and connect USB (Just press only for 1 sec It will vibrate and connect)
-Without waiting hit Download button.
-Voila It will start flashing your phone again and Hence Your phone is now Revive..
-Once Revive You can use it to again flash custom Rom or stick to stock Rom if you want.
Keep Flashing !!!
Patience is Key here. And Don't lose hope.
:good:
Click to expand...
Click to collapse
I'm happy that my videos were helpful. Enjoy.
keeps vibrating showing logo again and again, neither won't turn off neither turn on till for so many hour until the charge is empty....
how to stop boot loop ??????
can you provide videos how to stop boot loop ??????
So i tried to root my s7 edge exynos vers and now im stuck into RECOVERY IS NOT SEANDROID ENFORCING ,i know you have to take out the battery and then get into download mode but how do i manage this with the s7? holding power home and vol down restarts it in this loop and trying power home and vol up does not work and odin does not see it please tell me there is a solution
hold power+volume DOWN+home
Sent from my SM-G935F using Tapatalk
claudiu224 said:
So i tried to root my s7 edge exynos vers and now im stuck into RECOVERY IS NOT SEANDROID ENFORCING ,i know you have to take out the battery and then get into download mode but how do i manage this with the s7? holding power home and vol down restarts it in this loop and trying power home and vol up does not work and odin does not see it please tell me there is a solution
Click to expand...
Click to collapse
Had the same issues a few weeks ago.
I think the right way for you is, to root again.
You have to try to get into the downlaod mode by 'holding power + home + volume up' (round about 10 secs), to reboot the device.
When the device shutts off then quickly change to 'power + home + volume down' to get into the download mode.
Dont know if it works but give it a try. Good luck. mate.
Let me know if it worked.
i m facing the same problem ,, no option to solve it pls find one fast ,
i m facing the same problem ,, no option to solve it pls find one fast , i am using indian s7
raj2x4 said:
i m facing the same problem ,, no option to solve it pls find one fast , i am using indian s7
Click to expand...
Click to collapse
connect the phone to the pc via USB and hold power +volume down + home button until download mode appears then use Odin to flash a firmware that`so how I managed to solve it
Hello! I tried to remove the TWRP recovery with factory reset on my NOTE 4 (SM-N910F) android 6.0.1, and now my phone wont turn on... I have tried power + volume (up and down and booth) + home button, but still black screen and no activity.. When I connects it to my computer it dosen't come up in Odin... So I can't see any ways to fix it... Can somebody please help me? Thank you very much!! Sorry for bad engelish!
Hello guys,
I'm experiencing an embarrasing problem with my grand prime. It boots itself in safe mode, and my volume down button isn't working. I think that the button is stuck but i cant find how to fix it. Is there any way to disable the volume button ?
Thanks