Hi!!!
Before upgrading my OP8P to Oxygen 11 i had 5G network, for some reason after the upgrade the option is available but when i search for networks I can't find 5G even when the "Smart" 5G is enabled or disabled...
GUARDIANBD said:
Hi!!!
Before upgrading my OP8P to Oxygen 11 i had 5G network, for some reason after the upgrade the option is available but when i search for networks I can't find 5G even when the "Smart" 5G is enabled or disabled...
Click to expand...
Click to collapse
Turn off smart 5G, leave network on automatic, let it find it itself.
Pop outside with your phone, maybe try another location. Just to verify that it's actually getting the signal.
If it's not then it's possible your APN (access point name) is missing or doesn't contain lines that you may need for 5G.
Haven't had too much luck with 5G on either of the OS' but it still certainly works when I have a strong signal on 5G
Few weeks back i had Vivo X50 Pro Plus it was connected with no issues to 5G.
I can't see them when i search manually either, my Wife's phone has 5G (Samsung Device), tried switching sims, same issues on my phone while on her phone i can pick up 5G network...
GUARDIANBD said:
Few weeks back i had Vivo X50 Pro Plus it was connected with no issues to 5G.
I can't see them when i search manually either, my Wife's phone has 5G (Samsung Device), tried switching sims, same issues on my phone while on her phone i can pick up 5G network...
Click to expand...
Click to collapse
Then it's the device.
When you jumped from 10 to 11 did you do a factory wipe? Or at the very least system, I've found the change of bases on the OnePlus can cause problems, weirdness, this could be a result of that.
Might be worth doing that if you've exhausted all other avenues.
Verify your APN is correct.
Try not to compare other devices, it isn't helping you.
The fact that your SIM works in another phone is all the info you need to verify its not the SIM.
The issue is the software on your OnePlus.
So that's all you need to tackle.
My money's on a bug caused by the update.
dladz said:
Then it's the device.
When you jumped from 10 to 11 did you do a factory wipe? Or at the very least system, I've found the change of bases on the OnePlus can cause problems, weirdness, this could be a result of that.
Might be worth doing that if you've exhausted all other avenues.
Verify your APN is correct.
Try not to compare other devices, it isn't helping you.
The fact that your SIM works in another phone is all the info you need to verify its not the SIM.
The issue is the software on your OnePlus.
So that's all you need to tackle.
My money's on a bug caused by the update.
Click to expand...
Click to collapse
Our APN is configured automatically btw.
No need to configure anything..
Think i can get it replaced?
GUARDIANBD said:
Our APN is configured automatically btw.
No need to configure anything..
Think i can get it replaced?
Click to expand...
Click to collapse
Should be able to add one then select that for usage
When I'm checking via *#*#4636#*#* i cant see any 5G frequency..
Are you using afwall+ ?
mordantly said:
Are you using afwall+ ?
Click to expand...
Click to collapse
Im not quite sure what it is...
Ok my suggestion won't apply.
GUARDIANBD said:
Im not quite sure what it is...
Click to expand...
Click to collapse
It's a Firewall security...
Have no firewall app or anything similar.
I disabled smart 5G and tried looking for it, same issue.
What does smart 5g do?
mordantly said:
What does smart 5g do?
Click to expand...
Click to collapse
Supposed to enable 5G while its really available
I tested on and off and couldn't tell if it did a 4g/5g signal priority or anything.
GUARDIANBD said:
Supposed to enable 5G while its really available
Click to expand...
Click to collapse
As I said earlier as you've changed OS essentially from 10 - 11 I would factory wipe, at the very least system via recovery.
dladz said:
As I said earlier as you've changed OS essentially from 10 - 11 I would factory wipe, at the very least system via recovery.
Click to expand...
Click to collapse
Already wiped also cache wipe same issue
GUARDIANBD said:
Already wiped also cache wipe same issue
Click to expand...
Click to collapse
Crap ok.
Hmmm.
Is the option actually visible on your phone for 5G within SIM?
Or just 4G?
What network are you with?
Also your other half is she using the same network? As I remember you saying hers is fine.
I also disable smart 5G it's either working or its not in my eyes.
Did you try to nuke the APN and add it manually?
All I do is add new APN then copy the settings from the SP's website and then choose that APN as my preferred choice.
Network mode is always automatic.
dladz said:
Crap ok.
Hmmm.
Is the option actually visible on your phone for 5G within SIM?
Or just 4G?
What network are you with?
Also your other half is she using the same network? As I remember you saying hers is fine.
I also disable smart 5G it's either working or its not in my eyes.
Did you try to nuke the APN and add it manually?
All I do is add new APN then copy the settings from the SP's website and then choose that APN as my preferred choice.
Network mode is always automatic.
Click to expand...
Click to collapse
I put her SIM on my OP8P SIM tray same issue.
Even replaced sim location on tray 2 same thing....
Added APN manually - same results.
I'll install the Beta 6 and see if it helps...
Related
Before I updated via OTA to 8.1 the Essential was connecting to LTE without issue. Since 8,1 I have to connect to CDMA and 3g in order to user my Dialer, otherwise Server Error is generated. No calls in or out.
I wanted to downgrade Yes rebooted, factory reset, etc.
I searched google up and down with no real answers that work. How do I get Sideload working again? It has to be a simple configuration or driver problem I will assume.
Thanks
Im in the same situation you are in also im on 3g at 1.50mbs up & down i have searched every where....
Exxeviant said:
Im in the same situation you are in also im on 3g at 1.50mbs up & down i have searched every where....
Click to expand...
Click to collapse
Here you go
https://forum.xda-developers.com/showpost.php?p=74920423&postcount=506
wolfu11 said:
Here you go
https://forum.xda-developers.com/showpost.php?p=74920423&postcount=506
Click to expand...
Click to collapse
Thanks. Still stuck using 3G. I can connect to 4G/LTE but cannot make phone calls as I still get the Server Error, Try Again.
Bigdny said:
Thanks. Still stuck using 3G. I can connect to 4G/LTE but cannot make phone calls as I still get the Server Error, Try Again.
Click to expand...
Click to collapse
I wrote that post that he referred you to, and while it worked in Oreo 8.0 it does not seem to work in 8.1 for me either.
Try this:
dial *228 and get a PRL update
reboot
*#*#4636#*#* (it may take a few seconds for it to come up if you do it right after a reboot)
set it to LTE/WCDMA
reboot
(you may have to check in mobile network settings that your APN is set to VZWINTERNET)
Let me know how it works out for you. I know that Verizon doesnt support WCDMA, but it forces you over to the Verizon LTE bands which is more or less the goal of this. For some reason this functions differently than any of the other settings that include LTE in them (believe me, I've tried them).
wolfhelm said:
I wrote that post that he referred you to, and while it worked in Oreo 8.0 it does not seem to work in 8.1 for me either.
Try this:
dial *228 and get a PRL update
reboot
*#*#4636#*#* (it may take a few seconds for it to come up if you do it right after a reboot)
set it to LTE/WCDMA
reboot
(you may have to check in mobile network settings that your APN is set to VZWINTERNET)
Let me know how it works out for you. I know that Verizon doesnt support WCDMA, but it forces you over to the Verizon LTE bands which is more or less the goal of this. For some reason this functions differently than any of the other settings that include LTE in them (believe me, I've tried them).
Click to expand...
Click to collapse
Well I reset my PRL via *228 and sure enough selecting 4G/LTE does put us at LTE/wcdma but my phone functions perfectly. I do notice the menus are changed and I got a couple other options though now. See attached
wolfu11 said:
Well I reset my PRL via *228 and sure enough selecting 4G/LTE does put us at LTE/wcdma but my phone functions perfectly. I do notice the menus are changed and I got a couple other options though now. See attached
Click to expand...
Click to collapse
Yep those are how the menu should look for a device that's not locked to sprint. It seems to me there are some firmware files that prefer sprint in these beta builds, because even on other carriers (and more than one person has said this) you can see 'sprint' pop up in the bar or in the settings even when you arent on sprint.
Interesting that yours gives you the option of 'wifi calling provisioned', I cant get that to not be greyed out on mine.
wolfhelm said:
Yep those are how the menu should look for a device that's not locked to sprint. It seems to me there are some firmware files that prefer sprint in these beta builds, because even on other carriers (and more than one person has said this) you can see 'sprint' pop up in the bar or in the settings even when you arent on sprint.
Interesting that yours gives you the option of 'wifi calling provisioned', I cant get that to not be greyed out on mine.
Click to expand...
Click to collapse
Yeah I've screwed with this phone so much I don't know what I did LOL but now it shows wifi calling even in dialer. I'm not sure if it really works cuz I have a good signal so it never switches. My e911 address is set up from my Moto z and I do have a wear24 watch tied to this phone not sure if that's what triggered it. ? I did get a new SIM card on Monday as well because I was fighting with the vzw crap so I don't know exactly what triggered the WiFi calling.
wolfhelm said:
I wrote that post that he referred you to, and while it worked in Oreo 8.0 it does not seem to work in 8.1 for me either.
Try this:
dial *228 and get a PRL update
reboot
*#*#4636#*#* (it may take a few seconds for it to come up if you do it right after a reboot)
set it to LTE/WCDMA
reboot
(you may have to check in mobile network settings that your APN is set to VZWINTERNET)
Let me know how it works out for you. I know that Verizon doesnt support WCDMA, but it forces you over to the Verizon LTE bands which is more or less the goal of this. For some reason this functions differently than any of the other settings that include LTE in them (believe me, I've tried them).
Click to expand...
Click to collapse
Thank you for the steps but still cannot use 4G for phone calls, but it does work for internet, facebook, email,etc.
Have to go back to 3G for phone calls.
Very interesting why it happening and not widespread. No special configurations or setups on my phone.
Bigdny said:
Thank you for the steps but still cannot use 4G for phone calls, but it does work for internet, facebook, email,etc.
Have to go back to 3G for phone calls.
Very interesting why it happening and not widespread. No special configurations or setups on my phone.
Click to expand...
Click to collapse
Are you on 8.0 or 8.1?
wolfhelm said:
Are you on 8.0 or 8.1?
Click to expand...
Click to collapse
I upgraded to 8.1 via OTA. No root, no rom.
Bigdny said:
I upgraded to 8.1 via OTA. No root, no rom.
Click to expand...
Click to collapse
That's where I'm at too... the one thing that might be different about this is I tried my old steps first before figuring out how to get it to work with these new ones... seems like a lot of effort, but it might be what is needed (or some amount of it) to get it all working. So try going through the old ones before the new ones (you probably dont need to *228 again since you just did)
My old steps linked here (these worked in 8.0, if they work for you in 8.1, more power to you, but they dont work for me):
https://forum.xda-developers.com/showpost.php?p=74920423&postcount=506
I'm still routinely messing with it because I feel like the setting I have now prevents me from falling back to CDMA if LTE is unavailable for some reason. Fortunately that is a rarity for me... but I maintain that Essential has something in the ROM itself that is preferring sprint and I think it's screwing with us using Verizon.
wolfhelm said:
That's where I'm at too... the one thing that might be different about this is I tried my old steps first before figuring out how to get it to work with these new ones... seems like a lot of effort, but it might be what is needed (or some amount of it) to get it all working. So try going through the old ones before the new ones (you probably dont need to *228 again since you just did)
My old steps linked here (these worked in 8.0, if they work for you in 8.1, more power to you, but they dont work for me):
https://forum.xda-developers.com/showpost.php?p=74920423&postcount=506
I'm still routinely messing with it because I feel like the setting I have now prevents me from falling back to CDMA if LTE is unavailable for some reason. Fortunately that is a rarity for me... but I maintain that Essential has something in the ROM itself that is preferring sprint and I think it's screwing with us using Verizon.
Click to expand...
Click to collapse
There is something there.
I've done that procedure.
If I go into the menu and play around it will try to connect to sprint even with a Verizon SIM. Go figure?
tech_head said:
There is something there.
I've done that procedure.
If I go into the menu and play around it will try to connect to sprint even with a Verizon SIM. Go figure?
Click to expand...
Click to collapse
Exactly. If I leave it on certain settings it'll actually sit there and tell me I'm connected to Sprint.
wolfhelm said:
Exactly. If I leave it on certain settings it'll actually sit there and tell me I'm connected to Sprint.
Click to expand...
Click to collapse
I just reported this to Essential in their beta feedback.
Others should report their similar issues.
It seems to be associated with them making a unified release.
If you look at some releases they are specifically for Sprint or Not.
tech_head said:
I just reported this to Essential in their beta feedback.
Others should report their similar issues.
It seems to be associated with them making a unified release.
If you look at some releases they are specifically for Sprint or Not.
Click to expand...
Click to collapse
That's a good point, I have reported as well.
tech_head said:
I just reported this to Essential in their beta feedback.
Others should report their similar issues.
It seems to be associated with them making a unified release.
If you look at some releases they are specifically for Sprint or Not.
Click to expand...
Click to collapse
Doing the same right now. Just glad Im not the only one having the problem.
Bigdny said:
Thank you for the steps but still cannot use 4G for phone calls, but it does work for internet, facebook, email,etc.
Have to go back to 3G for phone calls.
Very interesting why it happening and not widespread. No special configurations or setups on my phone.
Click to expand...
Click to collapse
Try turning off Enchanted 4G LTE Mode. It's possible going to 8.1 just reset this setting to on. This should only be on if you have HD Voice enabled on your line on Verizon (you'll have to call Verizon to enable it, it's a free feature).
This should fix server error on 4G, randomly connecting to Sprint is a separate issue.
UPDATE Now working
Took the advice from someone on Reddit who had the same problem. Ran to VZW store and received a new SIM. Without any programming on my end or reboot, back to LTE without issue. FINALLY. As soon as the rep popped in the SIM the essential connected on its own.
Bigdny said:
Took the advice from someone on Reddit who had the same problem. Ran to VZW store and received a new SIM. Without any programming on my end or reboot, back to LTE without issue. FINALLY. As soon as the rep popped in the SIM the essential connected on its own.
Click to expand...
Click to collapse
Just wanted to second this post that a new sim card is the key to solving this issue. In my case, I was using Red Pocket CDMA (VZW network), and I ran into the same problem. Red Pocket rep explained to me that my sim got provisioned to 3g only and that I needed a new sim to connect to LTE. As soon as we switched to a new sim, I got LTE. I hope this helps others.
Hello All.
This may sound like an easy problem to solve and a part of me hopes it is. but im fairly well versed in android and has me baffled.
Phone runs beautifully 870DS. When i leave WiFi, the swith to mobile data takes for ever and then remains super fickle and intermittent. I sometimes do not have any data moving whatsoever (offline dinosaur in chrome level) When i connect to wifi again, all is fine, instantly.
I have full signal (full bars).
Mobile data on.
Switch to mobile data on.
The correct network registered & the correct APN for that network is set.
I have it set to GSM/WCDMA/ LTE auto
I have tried setting RAT set to every possible combo and it still continues!
I read somewhere it could be caused by radio initiation, so i went in *#*#4636#*#* to run a ping test but "phone information" throws up an error "This application does not work on this device"
Im 95% certain it is unlocked because i I bought the phone in another country and just popped my new sim straight in without hassle.
The mobile data issues started almost immediately. Now im stumped as what to do.
Any suggestions would be greatly appreciated and rewarded with beer :good:
THANKS!!!
In Developer Options, try switching on the "Agressive WiFi to Cellular Handover" option.
LPMatt said:
In Developer Options, try switching on the "Agressive WiFi to Cellular Handover" option.
Click to expand...
Click to collapse
Thanks. I will try that and trial run it over the next few days. The issue also occurs randomly while out on LTE or 3G. I will take my phone out to check google or whatsapp and nothing will send. So as your suggestion may be a work around, i doubt it will be a solve.
Will let you know how it goes
deathcells said:
Thanks. I will try that and trial run it over the next few days. The issue also occurs randomly while out on LTE or 3G. I will take my phone out to check google or whatsapp and nothing will send. So as your suggestion may be a work around, i doubt it will be a solve.
Will let you know how it goes
Click to expand...
Click to collapse
No change or improvement to the connection
Bump for anymore help from anyone. Please??
Getting desperate here....
deathcells said:
Bump for anymore help from anyone. Please??
Getting desperate here....
Click to expand...
Click to collapse
Does the phone have the right bands for 4G in your country?
Thanks for the reply!
Not sure, how do i check that?
aioan said:
Does the phone have the right bands for 4G in your country?
Click to expand...
Click to collapse
Thanks for the reply!
Not sure, how do i check that?
deathcells said:
Thanks for the reply!
Not sure, how do i check that?
Click to expand...
Click to collapse
go to settings, system, about phone, hardware info and check the model number.
For example I have LG-H870 (European bands, single SIM model).
I see you have dual sim so probably model H870DS and this should have enough bands to work well in Europe and Asia. Check here:
https://www.teamandroid.com/2017/04/15/lg-g6-model-numbers-variants/
aioan said:
go to settings, system, about phone, hardware info and check the model number.
For example I have LG-H870 (European bands, single SIM model).
I see you have dual sim so probably model H870DS and this should have enough bands to work well in Europe and Asia. Check here:
https://www.teamandroid.com/2017/04/15/lg-g6-model-numbers-variants/
Click to expand...
Click to collapse
Thanks for that. Yes according to this https://www.frequencycheck.com/carr...0ds-g6-dual-sim-td-lte/mtn-group-south-africa
I do have the correct bands. Could a carrier lock only one of the slots rendering it single sim in effect? The one sim works perfectly, second sim, no dice
Sorry for bumping an old thread.
Gf is having a similar issue on her phone; long story short, it happens that sometimes, after being connected to Wi-Fi and turing it off, it takes ages for her to get a mobile data connection, despite having full signal.
I had her replace the SIM, as I've seen similar problems (intermittent data connection, phone appears connected but no Internet available, etc.) with a SIM card that was about to go bad; it didn't help. Next step would be a full phone reset.
@deathcells : did you find the cause of your issue?
@fagentu.xda
No unfortunately not. I just deal with it. Extremely frustrating standing in the shop trying to pay without internet...
I tried the settings and force options to no avail.
I tried using both sim cards (from different providers) in both slots for months and no combination ever worked for me. I have yet to figure out if i bought a dudd phone or if a work around exists. Please let me know what you find out! Thanks and best of luck
Have the same issue with mine now. It started to go bad a few weeks ago... Tried everything. Changed SIM card, factory reset, etc... and nothing will change.
I'd say that the phone is just faulty. As I'm still under the warranty I'm in contact with LG to find out about a possible fix or phone replacement. I'll try to keep you posted.
Have you guys find a solution for this? I cant do anything. Does flashing kdz to andriod 9 pie helps?
Hi All,
For those Canadians using either the OP8 or OP8 Pro, are you getting 5G with your carriers? I see that all the big three (Rogers/Bell/Telus) have launched 5G networks in various cities across Canada. I'm with Telus using the OP 8 Pro in Vancouver but cannot seem to get 5G downtown. According to Telus' map, I should have 5G coverage but the phone only shows 4G.
What variant of the OP8 do you own?, the only ones that work with North American 5G are the IN2015 and IN2025,
IN2020, 2021, and2023
and
IN2010, 2015, and 2013
All lack NA 5G bands
Whoareyou said:
What variant of the OP8 do you own?, the only ones that work with North American 5G are the IN2015 and IN2025,
IN2020, 2021, and2023
and
IN2010, 2015, and 2013
All lack NA 5G bands
Click to expand...
Click to collapse
I've got the NA (IN2025) version which has B66 - Telus' 5G is deployed on that band.
rajeshr said:
I've got the NA (IN2025) version which has B66 - Telus' 5G is deployed on that band.
Click to expand...
Click to collapse
It may not have the ENDCs for Telus n66, submit a bug report on OnePlus community and maybe they can add support in a future update:
https://forums.oneplus.com/feedback/?node_id=230
It also may just not be enabled in the band combos, follow this guide to see if you need to add them:
https://mt-tech.fi/en/modify-oneplus-7-pro-5g-8-and-8-pro-nr-lte-a-band-combos/
I'm in Surrey, close to Vancouver but I don't think close enough to be around 5G towers. Maybe I'll make a drive downtown to test but my bigger issue is trying to get VoWiFi to work with Telus!
Whoareyou said:
It also may just not be enabled in the band combos, follow this guide to see if you need to add them:
https://mt-tech.fi/en/modify-oneplus-7-pro-5g-8-and-8-pro-nr-lte-a-band-combos/
Click to expand...
Click to collapse
^^^This worked for me. I now have 5G enabled although the speeds are pretty bad!
Whoareyou said:
It may not have the ENDCs for Telus n66, submit a bug report on OnePlus community and maybe they can add support in a future update:
https://forums.oneplus.com/feedback/?node_id=230
Click to expand...
Click to collapse
Done. I have logged a bug report! It still sucks that 5G is not enabled out of the box. No 5G support out of the box, no dual SIM support for IN2025 model even now- I can understand the frustrations with the device.
rickysidhu_ said:
I'm in Surrey, close to Vancouver but I don't think close enough to be around 5G towers. Maybe I'll make a drive downtown to test but my bigger issue is trying to get VoWiFi to work with Telus!
Click to expand...
Click to collapse
Do you have VoLTE working with Telus?
rajeshr said:
^^^This worked for me. I now have 5G enabled although the speeds are pretty bad!
Done. I have logged a bug report! It still sucks that 5G is not enabled out of the box. No 5G support out of the box, no dual SIM support for IN2025 model even now- I can understand the frustrations with the device.
Click to expand...
Click to collapse
Great, just so you know with that process if you remove your sim card you will have to redo it apparently.
rajeshr said:
Do you have VoLTE working with Telus?
Click to expand...
Click to collapse
Yeah that works. Or at least I think it does - I see an HD icon during some calls and I believe that's the indicator it's working.
rickysidhu_ said:
Yeah that works. Or at least I think it does - I see an HD icon during some calls and I believe that's the indicator it's working.
Click to expand...
Click to collapse
You'll know if volte works if you get simultaneous voice and data, it'll also show a VoLTE icon in the status bar.
You can also try to force that on with this app:
https://www.apkmirror.com/apk/onepl...ase/onepluslogkit-1-0-2-android-apk-download/
Install it, dial *#800#, enter logkit, Function Switch, tick volte and vowifi and then reboot.
Whoareyou said:
You'll know if volte works if you get simultaneous voice and data, it'll also show a VoLTE icon in the status bar.
You can also try to force that on with this app:
https://www.apkmirror.com/apk/onepl...ase/onepluslogkit-1-0-2-android-apk-download/
Install it, dial *#800#, enter logkit, Function Switch, tick volte and vowifi and then reboot.
Click to expand...
Click to collapse
I don't get any status bar icon but that may be because I have it turned off in settings.
I did go into the logkit (had to install the OnePlus 7 Pro version to see the settings) to turn on both VoWiFi and VoLTE.
On my previous Pixel device, I would see an icon saying "HD" next to the call duration and I see the same thing on this phone, which leads me to believe it is working. I can also tell by the call quality as well. I haven't noticed if I have simultaneous voice and data but I'll check that the next call I'm on.
As for VoWiFi, I think the function switch settings just show the toggles in settings but it doesn't do anything. Just ends up being a dummy switch.
I called Telus to activate/register the device IMS and the first rep had no idea what I was talking about. Second rep gave an indirect answer by saying "everything is fine on our end so your device may just be incompatible".
Strange because I called to register my Pixel's IMS and VoWiFi and VoLTE immediately worked afterwards. Maybe I just got lucky with a more knowledgeable rep back then.
I'm going to try and reach out to live chat support to see if they can provide any more answers because it would be nice to have both features working rather than just the one.
Hey, I have been unable to get it to work for me, I must have some mistake in my carrier policy edit. Would you be able to send me a copy of yours so I can compare?
Jmcdona said:
Hey, I have been unable to get it to work for me, I must have some mistake in my carrier policy edit. Would you be able to send me a copy of yours so I can compare?
Click to expand...
Click to collapse
Hey, I've attached the file here. Note that if you update to a newer version of the firmware or remove the SIM, the file will revert to the original and you will have to do this over again.
rickysidhu_ said:
I don't get any status bar icon but that may be because I have it turned off in settings.
I did go into the logkit (had to install the OnePlus 7 Pro version to see the settings) to turn on both VoWiFi and VoLTE.
Click to expand...
Click to collapse
I had to do the same but I also had to run QPST and change the profile to get it to work. I used to get the VOLTE icon but after the last firmware update, it seems to have disappeared. But I still get the HD icon when on calls, so I assume it is still working.
I'm kind of disappointed with OnePlus here - no VOLTE, 5G or dual-SIM working out of the box, even after three months of owning the device. For a US$1000 phone, this is pretty unacceptable. And having to muck around in the settings to get VoLTE or 5G working (and doing this on every firmware update) is not something I want to keep doing.
rajeshr said:
I had to do the same but I also had to run QPST and change the profile to get it to work. I used to get the VOLTE icon but after the last firmware update, it seems to have disappeared. But I still get the HD icon when on calls, so I assume it is still working.
I'm kind of disappointed with OnePlus here - no VOLTE, 5G or dual-SIM working out of the box, even after three months of owning the device. For a US$1000 phone, this is pretty unacceptable. And having to muck around in the settings to get VoLTE or 5G working (and doing this on every firmware update) is not something I want to keep doing.
Click to expand...
Click to collapse
And OnePlus says it's your carrier and your carrier says it's OnePlus Lol. I hate being thrown back and forth between the two just because no one wants to take on the burden/responsibility to get these features working.
rickysidhu_ said:
And OnePlus says it's your carrier and your carrier says it's OnePlus Lol. I hate being thrown back and forth between the two just because no one wants to take on the burden/responsibility to get these features working.
Click to expand...
Click to collapse
I think for VoLTE and 5G, all of the responsibility lies on OnePlus. The fact that these can be (temporarily)enabled manually after mucking around in the config files clearly points to OnePlus needing to do work to support this. Why advertise 5G and then create a blacklist for it?
Error Page
rajeshr said:
Hey, I've attached the file here. Note that if you update to a newer version of the firmware or remove the SIM, the file will revert to the original and you will have to do this over again.
Click to expand...
Click to collapse
Thanks for posting it, but it just links to an error page.
Jmcdona said:
Thanks for posting it, but it just links to an error page.
Click to expand...
Click to collapse
It's an XML file, so the browser tries to process it and displays an error. If you right click on it and save it on your desktop, the file will get downloaded.
If you can't get it to work, I'll upload it as a text file.
rajeshr said:
Hey, I've attached the file here. Note that if you update to a newer version of the firmware or remove the SIM, the file will revert to the original and you will have to do this over again.
Click to expand...
Click to collapse
Thanks for sharing! Will test it tonight and hopefully get 5G to work.
To your knowledge, will this get VoLTE also?
Bell is continuing to restrict 5g unless it is a phone they have sold
Looks like T-MOBILE OP8 got an update today (8/25)...
Interesting that it's asking the user to "backup data".
Curious, since taking this update, has anyone experienced signal issues? Data loss, cell service loss ECT?
mammothjojo88 said:
Looks like T-MOBILE OP8 got an update today...
Interesting that it's asking the user to "backup data".
Click to expand...
Click to collapse
Are you rooted? Mine shows up to date and I'm on 10.5.10. Might have to use MSM tool and then update and root afterwards unless someone can get the full firmware link.
jeffsga88 said:
Are you rooted? Mine shows up to date and I'm on 10.5.10. Might have to use MSM tool and then update and root afterwards unless someone can get the full firmware link.
Click to expand...
Click to collapse
Mine is rooted as well and is on 10.5.10.IN55CB. No updates. Maybe I have to uninstall Magisk to see if the updates show up!
Updated my device with no issues. Still don't have the utility to update my OnePlus buds though.
I just flashed the global rom the other day... Any ideas if the global will get the update to allow 5g SA at some point?
need someone to fastboot twrp before the convert
rekman said:
I just flashed the global rom the other day... Any ideas if the global will get the update to allow 5g SA at some point?
Click to expand...
Click to collapse
It sucks that without the 5G SA, Tmo 5G feels like 3G or 4G in some areas...
The 5G SA might be just the modem firmware so if someone can back up his 5G SA modem file and provide to us then maybe we could store it to the global rom.
Got the new update, but the 5g data signal has been acting up as well as the calls and text. Are any of you having similar issues ?
Rick1221 said:
Got the new update, but the 5g data signal has been acting up as well as the calls and text. Are any of you having similar issues ?
Click to expand...
Click to collapse
Same here, done get text for 2 hours before I realized it. Switched back to lte
New SA 5G update Working fine here, had to reboot after update but getting noticably faster 5G speeds
ruvy01 said:
New SA 5G update Working fine here, had to reboot after update but getting noticably faster 5G speeds
Click to expand...
Click to collapse
Interesting I am only getting 25-30 Mbps download on standalone and get 120 - 170 Mbps download on LTE+NR
You know out side of speed the new update made my phone calls more stable. Between Cincinnati and Dayton I continually used to get dicey connections where you could only understand every other syllable and it was always in the same spots. Today not one time did the call waver, it was solid. Was pretty impressed, hopefully it stays that way.
Sent from my IN2017 using Tapatalk
shaneg79 said:
Interesting I am only getting 25-30 Mbps download on standalone and get 120 - 170 Mbps download on LTE+NR
Click to expand...
Click to collapse
I'm the opposite, these are the speeds with good reception, somewhere in between Wilsonville and Aurora Oregon.
jeffsga88 said:
Are you rooted? Mine shows up to date and I'm on 10.5.10. Might have to use MSM tool and then update and root afterwards unless someone can get the full firmware link.
Click to expand...
Click to collapse
I think when the bootloader is unlocked on the T-Mobile variants you wont get the update and if you do it will fail to install. At least that's the way it was on my 6T. BUt that seemed so much more simple to convert to international so I just never worried about it.
Whats also lame is the lack of download support for the T-Mobile device. I really dont like that but as you said, MSM back to original and update from there. Thats always quick, easy and fun.
ecompton59 said:
need someone to fastboot twrp before the convert
Click to expand...
Click to collapse
Huh?
Scott said:
I think when the bootloader is unlocked on the T-Mobile variants you wont get the update and if you do it will fail to install. At least that's the way it was on my 6T. BUt that seemed so much more simple to convert to international so I just never worried about it.
Whats also lame is the lack of download support for the T-Mobile device. I really dont like that but as you said, MSM back to original and update from there. Thats always quick, easy and fun.
Huh?
Click to expand...
Click to collapse
If someone has stock rooted pull modem or find the update in a temp file on your device I know tmobile does updates differently
[email protected] said:
Same here, done get text for 2 hours before I realized it. Switched back to lte
Click to expand...
Click to collapse
Yeah , had to do the same, I would try to make a phone call and will state no signal, with all bars full. Also ppl kept calling me and going to VM.
How do you know when you're on standalone?
I am not rooted, so I'm not sure how it works on that end. I did factory reset after taking the update. The "backup data" suggest that there might be a modem update as well. I am however still having issues with text and calls. I notice if I leave my phone on wifi my service data signal and reception show an X by it. I had to also switch to LTE or 5G to send messages. No support for wireless buds yet though. Oh well. Calls do hold stronger as some of you have mentioned so, that's a right step in the right direction?
shaneg79 said:
Interesting I am only getting 25-30 Mbps download on standalone and get 120 - 170 Mbps download on LTE+NR
Click to expand...
Click to collapse
That's to be expected. SA means you're only using 1 band of NR (usually N71). It doesn't aggregate with LTE in standalone mode, therefore speeds will be less. The benefits is that since it's only connecting to 5G, the ping will be less (my ping is around 15ms on SA while 25-30ms on NSA) and signal for NR goes further as it's not connecting to LTE.
ruvy01 said:
I'm the opposite, these are the speeds with good reception, somewhere in between Wilsonville and Aurora Oregon.
Click to expand...
Click to collapse
You're speedtest are from using NSA mode (NR + LTE) not SA mode. Most of the time you'll connect to NSA instead of SA for now unless you manually lock on to SA in settings, although I don't recommend doing that if it's your main phone as you won't be able to receive or make phone calls. Generally the max on N71 SA will be around 50mbps if on 10mhz and 100mbps if on 20mhz. Also ping times will be in the teens usually 12-18ms ping times on SA.
Scott said:
I think when the bootloader is unlocked on the T-Mobile variants you wont get the update and if you do it will fail to install. At least that's the way it was on my 6T. BUt that seemed so much more simple to convert to international so I just never worried about it.
Whats also lame is the lack of download support for the T-Mobile device. I really dont like that but as you said, MSM back to original and update from there. Thats always quick, easy and fun.
Click to expand...
Click to collapse
Yeah, to get the update I ended up having to use MSM tool and then update and re-root my phone. That was fun since MSM broke fingerprint reader (although knowing it was possible I used the readback function of MSM to save my persist partition). Thankfully fastboot flashing my persist fixed my fingerprint afterwards. I really hate that t mobile version gets rid of local upgrade option, don't understand why OnePlus agreed to remove that feature for t mobile.
Rick1221 said:
Yeah , had to do the same, I would try to make a phone call and will state no signal, with all bars full. Also ppl kept calling me and going to VM.
Click to expand...
Click to collapse
Sounds like you were locked on to 5G SA. I've been doing testing and when locked on to 5G SA I wouldn't receive calls, but when I tried to make calls it would drop back to NSA or LTE to do the call over voLTE without an issue. If I manually selected NR only in settings, I couldn't make or receive calls, although that's expected as there is no voNR currently (not until next year devices using the x60 modem).
grabber5.0 said:
How do you know when you're on standalone?
Click to expand...
Click to collapse
Only way to know is if you manually force it in settings or use Network Signal Guru (although root is required as well as a license). Other Android apps aren't currently showing NR information. If you want to force it go in dialer and type:
Code:
*#*#4636#*#*
Then change to NR only for preferred network type. Again, I don't recommend doing so if it's your main device as in NR only mode you won't be able to make or receive calls.
jeffsga88 said:
That's to be expected. SA means you're only using 1 band of NR (usually N71). It doesn't aggregate with LTE in standalone mode, therefore speeds will be less. The benefits is that since it's only connecting to 5G, the ping will be less (my ping is around 15ms on SA while 25-30ms on NSA) and signal for NR goes further as it's not connecting to LTE.
You're speedtest are from using NSA mode (NR + LTE) not SA mode. Most of the time you'll connect to NSA instead of SA for now unless you manually lock on to SA in settings, although I don't recommend doing that if it's your main phone as you won't be able to receive or make phone calls. Generally the max on N71 SA will be around 50mbps if on 10mhz and 100mbps if on 20mhz. Also ping times will be in the teens usually 12-18ms ping times on SA.
Yeah, to get the update I ended up having to use MSM tool and then update and re-root my phone. That was fun since MSM broke fingerprint reader (although knowing it was possible I used the readback function of MSM to save my persist partition). Thankfully fastboot flashing my persist fixed my fingerprint afterwards. I really hate that t mobile version gets rid of local upgrade option, don't understand why OnePlus agreed to remove that feature for t mobile.
Sounds like you were locked on to 5G SA. I've been doing testing and when locked on to 5G SA I wouldn't receive calls, but when I tried to make calls it would drop back to NSA or LTE to do the call over voLTE without an issue. If I manually selected NR only in settings, I couldn't make or receive calls, although that's expected as there is no voNR currently (not until next year devices using the x60 modem).
Only way to know is if you manually force it in settings or use Network Signal Guru (although root is required as well as a license). Other Android apps aren't currently showing NR information. If you want to force it go in dialer and type:
Then change to NR only for preferred network type. Again, I don't recommend doing so if it's your main device as in NR only mode you won't be able to make or receive calls.
Click to expand...
Click to collapse
Then why did TMobile lie and say it would be 20-30% faster than LTE with lower ping?
Hello guys, how i acrivate 5g on this phone? When in network settings it dont show 5 g to show. Any tricks?
Nitch84 said:
Hello guys, how i acrivate 5g on this phone? When in network settings it dont show 5 g to show. Any tricks?
Click to expand...
Click to collapse
Its activated by default and you can set it under the mobile network settings inside the options for your sim card.
Well should be. But thats the problem. It dont show to activate. I dunno if was before android update, maybe some bug with android 12? I have some performance issues on some apps, but wasnt expect problems witch network
*#*#4636#*#* using the google dialer
What version of OOS are you running? I seem to remember that when this phone came out it had the hardware capability, but the software wasn't finished. The 8 pro didn't have dual sim until late 10 or when 11 came out, I also think that was the time this phone got it's 5g capability too.