Hi guys,
i tried to root my OP5 (OxygenOS 9.0.10) but i couldn't even start.
My Pc and 3 other Laptops won't recognize the Device - while my OP7 connects just fine.
I have tried the USB debugging, the preference set to File Trasfer (MTP) and other dings in DEv Ops.
When i connect it it only loads without any symbol/popup about the usb mode.
Related
Today I plugged my phone into my PC and used a USB port of my computer case. It didn't work. Windows said connection to device would be lost, couldn't copy any files. I then switched to a port directly on the motherboard and it worked flawlessly. Any ideas why?
hi there,
thanks for the great omniROM, i use it a while now and I was never so happy with my Galaxy Note N7000!
running the latest 4.4.2 (20140329) and have a SDcard in slot working properly.
I upgraded from stock 4.1.2 and it was an better experience than ever before, but there is just one thing that bothers me: USB Connection
when I connect an USBStick via OTG or via USBcable to PC, the only thing that happens is charging. this appeared some while ago still in StockROM after excessive use of USBSticks (all FAT) and keyboards. I was hoping the rooting and upgrading to OmniRom would 'reset' this behaviour, but it didn't tried differend tools, some with SU and nothing worked.
so my questions is: how can I get into the PhoneUtil-menu in omnirom or the UART/USB option?
after researching some more, I found this similar case and (possible?) solution. i'm keeping some hopes in this to get USBtransfer working with USBsticks again:
........ GT-7000 USB Data connection not working
My phone was not detected as MTP by the computer.
My phone didn't detect that it was attached to a PC.
On my PC --It didn't work.
Another PC --It didn't work.
Even another PC --It didn't work.
Mac --It didn't work.
Tried all sorts of things written on many websites. --It didn't work.
There was no MTP option in the status bar. It just always charged using the PC.
THEN... Finally 1 day, when I was looking at the back of my CPU (PC ) I saw my USB 3.0 Ports (the Blue ones). I had never connected anything to them. So,
Tried on a USB 3.0 Port --It WORKED!
My phone was immediately detected as MTP. The option showed up in the status bar. I could transfer files. But then- What about my USB 2.0 Ports?
Then I did the following :
Dialed *#7248# for the PhoneUtil options.
Under 'UART' tap MODEM. Under USB, PDA.
If this is already your setting, choose the another ones (PDA for UART and MODEM for USB) and then tap SAVE and RESET.
Again dial *#7248# for the PhoneUtil options.
Under 'UART' tap MODEM. Under USB, PDA. Finally tap SAVE and RESET.
Your phone will now be detected as MTP with all types of USB Ports now.
thanks and best regards
hello everyone can anyone help me in this issue with my lenovo A600
i cant connect to PC using USB cable but it charge
when i connect it to PC the storage option not appear
when i go to developer mode the USB debugging is in grey and it cant be checked
i have the problem
me too
Revoke usb authorization from developer mode
Go to storage, select usb connection and set it to mtp.
Here's the situation. LG G6 us997, oem unlocked but not rooted. USB debugging is enabled and File Transfer (MTP) is the selected mode.
When I connect via USB to my MacBook pro (running osx 10.12), I am able to use adb to connect to my phone (push/pull files, etc). I am also able to connect to LG Bridge to initiate wifi file transfer (i.e. it recognizes my phone via USB).
However, when I open Android File Transfer it gives me a No Device Found error. If I switch the USB mode on the phone to "charging" and open AFT, I am given an error that suggests it sees the phone but knows it's not in File Transfer mode. It tells me to switch to MTP and reconnect, but then I again get the No Device Found error.
Here's the really strange thing. I performed two experiments. First, I plugged my G6 into another Mac (a mini) that had Android File Transfer installed, and instantly the file explorer popped up, working perfectly. That suggests to me that my cable isn't bad, and that my phone settings are probably okay.
But then I plugged my friend's Samsung Galaxy S6 into MY computer, and Android File Transfer popped open as it should, working perfectly. I'm not sure what this suggests. The weird thing about THAT is that plugging that same S6 into the afformentioned Mac Mini does NOT work!
So I'm stumped. I can always push/pull files via adb, but sometimes I want the simplicity of a drag and drop GUI, you know? A little more info: I think LG Bridge and AFT (and LG pc suite which doesn't work) can conflict, so I've definitely uninstalled those applications to minimize variables, rebooting between tests. I've also rebooted my phone between changes, and locked and unlocked it, and toggled File Tansfer to Charging modes repeatedly, and plugged and unplugged the cable, tried different usb ports, and switched cables.
Any ideas?
Hi guys,
I'm trying to connected to Nexus 6P (8.1) from my Pc
I connect it and it charges, but there's no ability to see its files. I've tried the following:
Changing USB Configuration in Developer Options to/from MTP.
Switching USB ports on computer (neither USB 2.0 / 3.0 Nothing)
Switching computers ( no luck)
Switching cables (no luck)
Switching Windows 10/7 (no luck)
Looking for the device manager on Windows- doesn't show up
Enabling/disabling USB debugging
Downloading Nexus Root Toolkit to download drivers (says "ADB device was not found." USB debugging has no effect)
Please help!