I have a radio like in the picture with the C021 PX5 V5.1 module.
The radio does not start after uploading the wrong software. The screen is dark.
I looked through the forum but couldn't find a way to connect this module to USB to recover (upload) new software.
Can someone help me. Thank you very much
Help guys
Deynero said:
Help guys
Click to expand...
Click to collapse
Try here https://4pda.ru/forum/index.php?showtopic=973677&st=0
Hello, I also have the same chip as yours, my display does not light up, is there a way to flash the software or not, I don't know if you fixed it, I'm asking for advice
Help pleace
Related
Hi guys...I'm about to loose my eyes searching trogh the forum for the answer to my question so please if this is a double thread don't flame me!!!
Here's the problem: I have a Tytn which doesn't load the phone module automatically at start.This means that I have to manually go to communication manager after boot is complete and start it...very annoying.
I wasn't able to identify a particular apps that disable or goes in conflict with the phone module after installing and I was wandering if there's a way to re-enable it without hard resetting the whole thing.
As I said I have a Tytn italian Rom and I didn't flash it yet...
Thank you!
mariner said:
Hi guys...I'm about to loose my eyes searching trogh the forum for the answer to my question so please if this is a double thread don't flame me!!!
Thank you!
Click to expand...
Click to collapse
We don't flame here. We just send the mob round to deliver a swift physical punishment.
Anyway, this was raised before under "flightmode" threads, here's one:
http://forum.xda-developers.com/showthread.php?t=279862&highlight=flightmode
Mike
Thank you! I will give them a try...
PS: don't be to rude!
mariner said:
Thank you! I will give them a try...
PS: don't be to rude!
Click to expand...
Click to collapse
We are here to serve
Mike
PS: Je ! grossier ! jamais, je suis un gentil type !
mariner said:
Hi guys...I'm about to loose my eyes searching trogh the forum for the answer to my question so please if this is a double thread don't flame me!!!
Here's the problem: I have a Tytn which doesn't load the phone module automatically at start.This means that I have to manually go to communication manager after boot is complete and start it...very annoying.
I wasn't able to identify a particular apps that disable or goes in conflict with the phone module after installing and I was wandering if there's a way to re-enable it without hard resetting the whole thing.
As I said I have a Tytn italian Rom and I didn't flash it yet...
Thank you!
Click to expand...
Click to collapse
Aha... I think I have found the problem...
Ms Voice Command v1.60 does it for me. As soon as I install it the phone won't start at boot up. Remove it and the problem is gone.
Wonder if everyone else with this problem has VC installed.
Hi folks !
I tried all the possible solutions offered here but none worked...sadly
I don't and I didn't have VC installed and I probably won't as it seems to be one possible guilty.
For me the only solution is hard reset at the moment...
Noe everything ( phone included ) works properly ( cross fingers )
but I fear next time I will try to install a new app...
If somebody gets news , please keep us updated!
C Ya
Hi Can anyone please help me how to overcome my problem? My device is stuck in the boot screen . Things don't change even after hard reset...Can anyone upload the original shipped rom for Dopod C800 1.09 rom?
hey my friend the same just happend to meee ;(
Do you found a solution ?
murali509 said:
Hi Can anyone please help me how to overcome my problem? My device is stuck in the boot screen . Things don't change even after hard reset...
Click to expand...
Click to collapse
put the phone in bootloader and flash the original rom
I have the same problem. No matter what rom code I flashed, always update error 300. Is there any idea to get rid of this problem? Thanks!
Strange... Isn't error 300 about using a RUU flasher on the wrong device?
Got my device to life after going to the service centre.... Successfully changed my Rom this time after using Hard spl by Canonyang and now I had flashed Touch IT V4.40....
My sincere advice from my experience...
Please read the instructions thoroghly before you attempt anything..
Happy flashing
murali509 said:
Got my device to life after going to the service centre.... Successfully changed my Rom this time after using Hard spl by Canonyang and now I had flashed Touch IT V4.40....
My sincere advice from my experience...
Please read the instructions thoroghly before you attempt anything..
Happy flashing
Click to expand...
Click to collapse
THANKS!!!
We tell it soooooo often. But it is good to hear that your device is back to life.
And it is GOOD to hear that the instructions we are giving - are helpful...
FOR EVERYone...
Hey dude, thanks a lot for your new rom... I'm a novice in this field and dont know anything..Does ur rom touchit4.4 have keyboard issues on Dopod C800?
murali509 said:
Hey dude, thanks a lot for your new rom... I'm a novice in this field and dont know anything..Does ur rom touchit4.4 have keyboard issues on Dopod C800?
Click to expand...
Click to collapse
it´s NOT mine. it is ITJE!!!
please ask in this thread. and please find out keyboardissues by flashing. i guess there is noone else with dopod running it...
Thank u for the quick reply....
Hello, after a flash for my TRINITY, the wlan in comm manager doesn't turn on.
I see in settings.connections-wireless that there's no MAC address.
If i enter in bootloader (olipro 1.30 installed) after USB i read in red: WLAN ERROR.
I also found this thread for Ermes http://forum.xda-developers.com/showthread.php?t=322225&
i tried different roms, radios and also the original wm5 rom with original radio, but nothing changed, the wireless doesn't activate.
Can someone please help me?
thank you
did you find solution?
hello... did you find solution to your problem?
i'm in your situation with no solution at all.
thanks
talpottolo said:
hello... did you find solution to your problem?
i'm in your situation with no solution at all.
thanks
Click to expand...
Click to collapse
Hello,
no solution for this problem, i'm sorry.
I think there's no way to fix it.
guys i think its a hardware problem !!!
Hi
Please can someone help me, I have a charmer work phone with a specific bit of software on it, is there anyway i can extract program from it and place onto another windows mobile device. I do not have the original setup for it and really need to change phone. Any help would be much appreciated
Regards
Chris
ChrisDavis7786 said:
Hi
Please can someone help me, I have a charmer work phone with a specific bit of software on it, is there anyway i can extract program from it and place onto another windows mobile device. I do not have the original setup for it and really need to change phone. Any help would be much appreciated
Regards
Chris
Click to expand...
Click to collapse
It would help if you said which software....
dwizzy130
sorry its ukaMFT if you know it?
HTC Surround error HSPL Show on booth 3 color "PD26*** SS-BC (4K)"
How can I fix ?
Hope you can solve it
Hello ah007
I have the same issue, and I found a solution
But, because I don't have time and the tools to do it, I really can't tell if you it's gonna work
I read that works, but nobody who have the same problem tell me if works
Just put this title in the search bar of the page
[Noob-friendly] Goldcard SPL Downgrade Method; No Android-Phone and/or custom wires!
Let me know if it reach the goal
And, I have a question for you
Do you have strange problems when you lock your phone?
I mean, unresponsive screen or something like that
I have this problem
Hope my answer works for you
"Live long and prosper"
DFLC56
Same Same
DFLC56 said:
Hello ah007
I have the same issue, and I found a solution
But, because I don't have time and the tools to do it, I really can't tell if you it's gonna work
I read that works, but nobody who have the same problem tell me if works
Just put this title in the search bar of the page
[Noob-friendly] Goldcard SPL Downgrade Method; No Android-Phone and/or custom wires!
Let me know if it reach the goal
And, I have a question for you
Do you have strange problems when you lock your phone?
I mean, unresponsive screen or something like that
I have this problem
Hope my answer works for you
"Live long and prosper"
DFLC56
Click to expand...
Click to collapse
Please help me if you find a solution for unrepresentable touch when screen locked
Any solution?
Please, Did someone found a solution to this problem? My PC can't recognize my T8788 when i connect it in spl mode.
Schematic diagrams of L3 and L4 for HTC Surround
Hi all, can somebody provide Schematic diagram of L3 and L4 for HTC surround?
Thanks in advance...