Phone module doesn't load automatically at start - 8525, TyTN, MDA Vario II, JasJam General

Hi guys...I'm about to loose my eyes searching trogh the forum for the answer to my question so please if this is a double thread don't flame me!!!
Here's the problem: I have a Tytn which doesn't load the phone module automatically at start.This means that I have to manually go to communication manager after boot is complete and start it...very annoying.
I wasn't able to identify a particular apps that disable or goes in conflict with the phone module after installing and I was wandering if there's a way to re-enable it without hard resetting the whole thing.
As I said I have a Tytn italian Rom and I didn't flash it yet...
Thank you!

mariner said:
Hi guys...I'm about to loose my eyes searching trogh the forum for the answer to my question so please if this is a double thread don't flame me!!!
Thank you!
Click to expand...
Click to collapse
We don't flame here. We just send the mob round to deliver a swift physical punishment.
Anyway, this was raised before under "flightmode" threads, here's one:
http://forum.xda-developers.com/showthread.php?t=279862&highlight=flightmode
Mike

Thank you! I will give them a try...
PS: don't be to rude!

mariner said:
Thank you! I will give them a try...
PS: don't be to rude!
Click to expand...
Click to collapse
We are here to serve
Mike
PS: Je ! grossier ! jamais, je suis un gentil type !

mariner said:
Hi guys...I'm about to loose my eyes searching trogh the forum for the answer to my question so please if this is a double thread don't flame me!!!
Here's the problem: I have a Tytn which doesn't load the phone module automatically at start.This means that I have to manually go to communication manager after boot is complete and start it...very annoying.
I wasn't able to identify a particular apps that disable or goes in conflict with the phone module after installing and I was wandering if there's a way to re-enable it without hard resetting the whole thing.
As I said I have a Tytn italian Rom and I didn't flash it yet...
Thank you!
Click to expand...
Click to collapse
Aha... I think I have found the problem...
Ms Voice Command v1.60 does it for me. As soon as I install it the phone won't start at boot up. Remove it and the problem is gone.
Wonder if everyone else with this problem has VC installed.

Hi folks !
I tried all the possible solutions offered here but none worked...sadly
I don't and I didn't have VC installed and I probably won't as it seems to be one possible guilty.
For me the only solution is hard reset at the moment...
Noe everything ( phone included ) works properly ( cross fingers )
but I fear next time I will try to install a new app...
If somebody gets news , please keep us updated!
C Ya

Related

XDA ROM update crashed - pease help

Hello,
I know, i am not the first one with this problem and i read many threads but i am not clearly understand the way (if there is a way) to fix my problem.
After updating my german xda Device i restarted and have been promped to enter my Pin, but the screen is frozen. So i did first a soft and after this a hard reset. Now after every hard reset i see the the O2-bubbles for some minutes and then the white screen with the blue bar on the top. Nothing is working.
I i wait for 10 or 20 Minuten the bubbles coming back - same game everytime.
I tried to enter the bootloader while holding the Power-Button while soft-resetting. BootLoader is seen, but shows a "gsm error".
I can not establish an active-sync-connection via USB-Cradle.
What can I do to rescue my XDA? Is there any possibility or can i put it to trash?
Any advice is very welcome!
Thanks!
Miwu
Dear all,
I am facing the same problem (XDA ROM update crashed) as miwu now . Can any expert teach me how to solve this problem by myself :?: or I need to let O2 engineer to fixing it :!: .
Thanks a lot !
Please HELP !
Dear all,
I can't get the white screen with the blue bar on the top because I am using 02 xda ver 4.00.11 (PPC2003), so that I can't use the repair.zip to fix it.
Any expert can to teach me how to fixing it by myself ?
Thanks !
Hi,
after half a night i fixed my described problem with the gsm-error in the bootloader.
I will post my solution in a new thread today in the afternoon.
Thanks to XDA-Developers for this great forum, its very helpful.
Thanks and regards from Berlin!
Miwu
Miwu,
That's great for you !
BTW, do you using PPC2003 as well ?
Hope to see your solution soon !
Thanks ! :wink:
Hello,
just posted my solution in a new thread
http://xda-developers.com/phpBB/viewtopic.php?t=2489
take a look there.
We first tried to fix it using 2003-SD-Flash but it become buggier, the pling-sound does not played, so we flashed back to PPC2002 and made it as described in the new thread!
Hope, you can flash CE with an PPC2002, maybe it helps, but I do not really know. Simply try or not!
Best regards from Berlin!
Miwu
I will try but I don't think it will work on mine because I am using bootloader v5.17 . Anyway, think for your help !
Best regards ! :lol:

thx!: o2 german shipped rom

Hi all!
I really need a original o2 rom (german). Since yesterday my touchscreen doesn't work anymore...nothing helps either soft or hardreset :/
I flashed my xda mini with a german t-mobile rom...works for a week, but after a hardreset yesterday the screen doesn't response on any touch.
An o2 Staff-Member in our local Shop told me (quietly) that I won't have any chance to get a new one, if it's so obvious that i flashed the device(No matter that I didn't make a mistake!) And I think it's very obvious if an xda boots with a t-mobile-logo^^ But a software-reason for the defective Touchscreen isn't probable, isnt it?
So i have to flash the xda mini with the original rom before i send it to O2 , by the way the only thing that i can do now with this device, cause I'm not able to finish the Touchscreen-Setup(hardreset) ...
I found the demand for the german o2-rom very oftenin this Forum, but mostly the answer is 'don't let the branding(t-mobile) get installed' etc. This doesn't help me, sorry! I didn't want the t-mobile-rom, i just did not think about the possibility that the shipped roms on the ftp are not from O2(could a admin rename this files, this happens to many pepole). It's was very angry to install the o2software 'by foot', but not the end of life^^
Now I really need this original rom! Couldn't anybode with a german xda mini take the time and make me and all the others happy with this rom?
I searched this rom the hole day, here and with google and didn't found it!
Please!
Big Thanks in advance!!!
Mattez
If anybody has nothing to do (and no german xda mini) he/she could correct my bad english (sorry!)
Plz help me...
I'am a student and my Magician is the only way to reach me wirthout internet! I can't belief that here isn't somebody who has the rom, is able to make/get it or know where I can found it, even i searched a lot now.
Plz help me, if its possible...!
If I can help you,I will do it
so far
MatteZ
Hello,
Just have a look at this thread :
http://forum.xda-developers.com/viewtopic.php?t=40993
Regards
Big thanks for this hint! You saved my day
How can i thank you?^^
What's about uploading it to the ftp for al the others?
I would do this, no prob!
I didn't want the t-mobile-rom, i just did not think about the possibility that the shipped roms(german) on the ftp are not from O2(could a admin rename this files, this happens to many pepole).
Click to expand...
Click to collapse
Perhaps this would save many beginners from doing the same stupid mistake, I must confess that a well-meaned advice to make a backup often is ignored to fast,I learned my leasson!
greetz and thx!
MatteZ

I need WM2005 password! HELP ME!!!

I have forgotten the password!
does someone know how I can recover or crack the 9100 windows password? ? ? ?
thank you very much!!!
There are a lot of similar problems discussed in the forum. No solution yet.
Look at the bright side, it is good to know that it is not possible to break into the phone without a password
It's imposible! On the Pda have my name and my phone number on owner screen.
but I have bought from not too long him! can give him that have not been precise with the keyboard! Help! ! ! !
it is not possible not to even change the rom without password? ? ?
The only thing you can do is hard-reset
thank you! when.... how do I make reset hardware? ? ?
Hardreset.. RTFM?
OR
go to the wiki (top section of this page, XDA-Wiki), go to the Wizard page and look for hardreset.
Thanks to everybody! ! have succeeded there! my Pda now works correctly
damn i figured it out. sorry for the noob post.

Trinity and consilient

Hy there,
I'm trying to set out consilient on my Trinity.
Has anybody experiencing that service?
http://www.consilient.com/
I've tryed to download the version for dopod 810 which I guess correspond to HTC P3600 but it doesn't work?
Could you please help me.
thank you very much
j
Hi Jus_mi,
Sorry to hear about your problems installing Consilient Push. I'm a member of the Windows Mobile development team at Consilient and we would be happy to help you get Push onto your Trinity. If you haven't already, then could you please go to http://www.consilient.com/support/ and drop us a message outlining exactly what you're seeing while trying to install.
Thanks,
Steve
I tried to install many times but did not work. It keeps asking for password.
I'm using it and it works perfectly...

SP3 Dead Need Urgent help !!

Hi All,
Am new to this forum ! but have been a passive member since very long time !
Now I have major issue and need help from the fellow members !
I have a Imate SP3 and was trying to update the rom ! My stupidity !! I tried to flash SP5 ROM to this and at 68% the desktop application threw and error and disappeared ! the phone was stuck at 68%,so I took the battery out and from then on the phone doesn't switch on !!
So desperately need help as to what to do !! please help me guys !!
Thanks in advance !
Regards.
Ok first download a proper ROM for your SP3.
I think you can use the procedure as when you want to revert to wm2003 on this tread:
http://forum.xda-developers.com/showthread.php?t=279464
Thanks !
Hi,
Thanks a lot buddy ! but the said procedure only works if the phone is atleast in the bootlaoder mode (i,e the tricolour mode) but as I said mine is almost completely dead (no lights when charger or the usb is connected and not powering on,I mean not even the LED glows) !!!!
So Am kinda stuck in this stage ! so I need a real trick to some how gain access to the ROM and flash it completely and install the proper one ( I mean I have to erase the EEPROM completely !)
Its similar to the one in the post #8 in the link you've sent !! and the answer to it in post is what I don't want to hear !!
Anyways thanks for quick reply man ! really appreciate it !
Regards.
Hi, are you solved your problem with your phone, if not i can help you, Wright me to PM...
P.S. For all Who unlock his phone via Imei-check, please send me your used "Key file"...
charge ur batire an tray agin baby
and tel me morrrr
handsome1_blr said:
Hi All,
Am new to this forum ! but have been a passive member since very long time !
Now I have major issue and need help from the fellow members !
I have a Imate SP3 and was trying to update the rom ! My stupidity !! I tried to flash SP5 ROM to this and at 68% the desktop application threw and error and disappeared ! the phone was stuck at 68%,so I took the battery out and from then on the phone doesn't switch on !!
So desperately need help as to what to do !! please help me guys !!
Thanks in advance !
Regards.
Click to expand...
Click to collapse
My Cousin Did the Same Exact Thing to his Imate SP3i it also got stuck at 68% it does nothing it was brand new now its paper weight anyway to fix this ?
defcomg said:
My Cousin Did the Same Exact Thing to his Imate SP3i it also got stuck at 68% it does nothing it was brand new now its paper weight anyway to fix this ?
Click to expand...
Click to collapse
Wright me to PM...
Typhoon Service Manual
http://mikechannon.net/PDF Manuals/HTC_Typhoon_Service_manual.pdf
Feeler Service Manual
http://www.mikechannon.net/PDF Manuals/HTC Feelers Service manual_Rev A01.pdf
Jtag Detection
http://hackaday.com/2007/09/29/automatic-jtag-pinout-detection/
defcomg said:
Typhoon Service Manual
http://mikechannon.net/PDF Manuals/HTC_Typhoon_Service_manual.pdf
Feeler Service Manual
http://www.mikechannon.net/PDF Manuals/HTC Feelers Service manual_Rev A01.pdf
Jtag Detection
http://hackaday.com/2007/09/29/automatic-jtag-pinout-detection/
Click to expand...
Click to collapse
For what you want use jtag-pinout-detection? Links on this site are dead, and hear you can find Jtag pins for Typhone: http://forum.xda-developers.com/showthread.php?t=414103

Categories

Resources