I have forgotten the password!
does someone know how I can recover or crack the 9100 windows password? ? ? ?
thank you very much!!!
There are a lot of similar problems discussed in the forum. No solution yet.
Look at the bright side, it is good to know that it is not possible to break into the phone without a password
It's imposible! On the Pda have my name and my phone number on owner screen.
but I have bought from not too long him! can give him that have not been precise with the keyboard! Help! ! ! !
it is not possible not to even change the rom without password? ? ?
The only thing you can do is hard-reset
thank you! when.... how do I make reset hardware? ? ?
Hardreset.. RTFM?
OR
go to the wiki (top section of this page, XDA-Wiki), go to the Wizard page and look for hardreset.
Thanks to everybody! ! have succeeded there! my Pda now works correctly
damn i figured it out. sorry for the noob post.
Related
Hello,
I know, i am not the first one with this problem and i read many threads but i am not clearly understand the way (if there is a way) to fix my problem.
After updating my german xda Device i restarted and have been promped to enter my Pin, but the screen is frozen. So i did first a soft and after this a hard reset. Now after every hard reset i see the the O2-bubbles for some minutes and then the white screen with the blue bar on the top. Nothing is working.
I i wait for 10 or 20 Minuten the bubbles coming back - same game everytime.
I tried to enter the bootloader while holding the Power-Button while soft-resetting. BootLoader is seen, but shows a "gsm error".
I can not establish an active-sync-connection via USB-Cradle.
What can I do to rescue my XDA? Is there any possibility or can i put it to trash?
Any advice is very welcome!
Thanks!
Miwu
Dear all,
I am facing the same problem (XDA ROM update crashed) as miwu now . Can any expert teach me how to solve this problem by myself :?: or I need to let O2 engineer to fixing it :!: .
Thanks a lot !
Please HELP !
Dear all,
I can't get the white screen with the blue bar on the top because I am using 02 xda ver 4.00.11 (PPC2003), so that I can't use the repair.zip to fix it.
Any expert can to teach me how to fixing it by myself ?
Thanks !
Hi,
after half a night i fixed my described problem with the gsm-error in the bootloader.
I will post my solution in a new thread today in the afternoon.
Thanks to XDA-Developers for this great forum, its very helpful.
Thanks and regards from Berlin!
Miwu
Miwu,
That's great for you !
BTW, do you using PPC2003 as well ?
Hope to see your solution soon !
Thanks ! :wink:
Hello,
just posted my solution in a new thread
http://xda-developers.com/phpBB/viewtopic.php?t=2489
take a look there.
We first tried to fix it using 2003-SD-Flash but it become buggier, the pling-sound does not played, so we flashed back to PPC2002 and made it as described in the new thread!
Hope, you can flash CE with an PPC2002, maybe it helps, but I do not really know. Simply try or not!
Best regards from Berlin!
Miwu
I will try but I don't think it will work on mine because I am using bootloader v5.17 . Anyway, think for your help !
Best regards ! :lol:
Hi guys...I'm about to loose my eyes searching trogh the forum for the answer to my question so please if this is a double thread don't flame me!!!
Here's the problem: I have a Tytn which doesn't load the phone module automatically at start.This means that I have to manually go to communication manager after boot is complete and start it...very annoying.
I wasn't able to identify a particular apps that disable or goes in conflict with the phone module after installing and I was wandering if there's a way to re-enable it without hard resetting the whole thing.
As I said I have a Tytn italian Rom and I didn't flash it yet...
Thank you!
mariner said:
Hi guys...I'm about to loose my eyes searching trogh the forum for the answer to my question so please if this is a double thread don't flame me!!!
Thank you!
Click to expand...
Click to collapse
We don't flame here. We just send the mob round to deliver a swift physical punishment.
Anyway, this was raised before under "flightmode" threads, here's one:
http://forum.xda-developers.com/showthread.php?t=279862&highlight=flightmode
Mike
Thank you! I will give them a try...
PS: don't be to rude!
mariner said:
Thank you! I will give them a try...
PS: don't be to rude!
Click to expand...
Click to collapse
We are here to serve
Mike
PS: Je ! grossier ! jamais, je suis un gentil type !
mariner said:
Hi guys...I'm about to loose my eyes searching trogh the forum for the answer to my question so please if this is a double thread don't flame me!!!
Here's the problem: I have a Tytn which doesn't load the phone module automatically at start.This means that I have to manually go to communication manager after boot is complete and start it...very annoying.
I wasn't able to identify a particular apps that disable or goes in conflict with the phone module after installing and I was wandering if there's a way to re-enable it without hard resetting the whole thing.
As I said I have a Tytn italian Rom and I didn't flash it yet...
Thank you!
Click to expand...
Click to collapse
Aha... I think I have found the problem...
Ms Voice Command v1.60 does it for me. As soon as I install it the phone won't start at boot up. Remove it and the problem is gone.
Wonder if everyone else with this problem has VC installed.
Hi folks !
I tried all the possible solutions offered here but none worked...sadly
I don't and I didn't have VC installed and I probably won't as it seems to be one possible guilty.
For me the only solution is hard reset at the moment...
Noe everything ( phone included ) works properly ( cross fingers )
but I fear next time I will try to install a new app...
If somebody gets news , please keep us updated!
C Ya
dear all,
i got a P3600(orange), but now it cann't work by my wrong's operation. i flashed a incorrect rom version before unlock. so it cann't boot and do anything except entering three color screen manually.how can i do ?
please help me and give me some threads pls.
thanks a lot.
joyqing said:
dear all,
i got a P3600(orange), but now it cann't work by my wrong's operation. i flashed a incorrect rom version before unlock. so it cann't boot and do anything except entering three color screen manually.how can i do ?
please help me and give me some threads pls.
thanks a lot.
Click to expand...
Click to collapse
Take a look here:
http://forum.xda-developers.com/showthread.php?t=308691
Thank u very much, i'll try it.
dear tnyynt,
you are great! i got it. my P3600 has came back.
welcome to beijing to visit Olympic Games. i will give your good reception.
mobile: 13910625996
joyqing from beijing
Sorry if the post has already been mentioned in another forum before.
I have an O2 XDA Orbit and i'm looking to put Fracoons Artermis rom on it http://forum.xda-developers.com/show...o♦.
I'm pretty new to flashing phones and PDA's but i'm quite experienced with a PC so shouldnt need to much help!
I was wondering what steps I should ensure to take to make sure that I dont turn it into a brick, I could do with a complete guide! I've also been told that i'll need to run the Artermus USPL program after connecting the phone. But any help and advice would be a great help. Is there anyway to backup the phone in the state it is at present if or if it doesnt go wrong?
Thankyou for the help and sorry again i've this has already been asked by someone else! Will really appreciated it!
Please if anyone can help me with my querys it would be such a help as to avoid turning my phone into a brick. I really want WM6 and the touch flo system! But would also like to know anymore information!
Many thanks, Lee.
Hi All,
Am new to this forum ! but have been a passive member since very long time !
Now I have major issue and need help from the fellow members !
I have a Imate SP3 and was trying to update the rom ! My stupidity !! I tried to flash SP5 ROM to this and at 68% the desktop application threw and error and disappeared ! the phone was stuck at 68%,so I took the battery out and from then on the phone doesn't switch on !!
So desperately need help as to what to do !! please help me guys !!
Thanks in advance !
Regards.
Ok first download a proper ROM for your SP3.
I think you can use the procedure as when you want to revert to wm2003 on this tread:
http://forum.xda-developers.com/showthread.php?t=279464
Thanks !
Hi,
Thanks a lot buddy ! but the said procedure only works if the phone is atleast in the bootlaoder mode (i,e the tricolour mode) but as I said mine is almost completely dead (no lights when charger or the usb is connected and not powering on,I mean not even the LED glows) !!!!
So Am kinda stuck in this stage ! so I need a real trick to some how gain access to the ROM and flash it completely and install the proper one ( I mean I have to erase the EEPROM completely !)
Its similar to the one in the post #8 in the link you've sent !! and the answer to it in post is what I don't want to hear !!
Anyways thanks for quick reply man ! really appreciate it !
Regards.
Hi, are you solved your problem with your phone, if not i can help you, Wright me to PM...
P.S. For all Who unlock his phone via Imei-check, please send me your used "Key file"...
charge ur batire an tray agin baby
and tel me morrrr
handsome1_blr said:
Hi All,
Am new to this forum ! but have been a passive member since very long time !
Now I have major issue and need help from the fellow members !
I have a Imate SP3 and was trying to update the rom ! My stupidity !! I tried to flash SP5 ROM to this and at 68% the desktop application threw and error and disappeared ! the phone was stuck at 68%,so I took the battery out and from then on the phone doesn't switch on !!
So desperately need help as to what to do !! please help me guys !!
Thanks in advance !
Regards.
Click to expand...
Click to collapse
My Cousin Did the Same Exact Thing to his Imate SP3i it also got stuck at 68% it does nothing it was brand new now its paper weight anyway to fix this ?
defcomg said:
My Cousin Did the Same Exact Thing to his Imate SP3i it also got stuck at 68% it does nothing it was brand new now its paper weight anyway to fix this ?
Click to expand...
Click to collapse
Wright me to PM...
Typhoon Service Manual
http://mikechannon.net/PDF Manuals/HTC_Typhoon_Service_manual.pdf
Feeler Service Manual
http://www.mikechannon.net/PDF Manuals/HTC Feelers Service manual_Rev A01.pdf
Jtag Detection
http://hackaday.com/2007/09/29/automatic-jtag-pinout-detection/
defcomg said:
Typhoon Service Manual
http://mikechannon.net/PDF Manuals/HTC_Typhoon_Service_manual.pdf
Feeler Service Manual
http://www.mikechannon.net/PDF Manuals/HTC Feelers Service manual_Rev A01.pdf
Jtag Detection
http://hackaday.com/2007/09/29/automatic-jtag-pinout-detection/
Click to expand...
Click to collapse
For what you want use jtag-pinout-detection? Links on this site are dead, and hear you can find Jtag pins for Typhone: http://forum.xda-developers.com/showthread.php?t=414103