Database Users

[RESOLVED] Soft bricked my S7 Edge (SPRINT)

Hello,
So being the careless idiot that I am, it appears that my S7 Edge is soft bricked.
When I boot it up, I'm presented with "An error has occurred while updating the device software. Use the Emergency recovery function in the Smart Switch PC Software"
I can still access the Download Mode.
When I try to access the Recovery Mode, there's the blue text in the top left corner and then the phone reboots in a loop while trying to get into recovery mode.
I tried the Smart Switch software, but it doesn't recognize my phone so I'm unable to use it.
In Download Mode:
RP SWREV: B4 (2, 1, 1, 1, 1) K1 S3
What firmware can I flash to get this thing up and running again? I just recently upgraded to Nougat through the OTA update.
Sorry to trouble you guys with my foolishness. Ugh..
EDIT:
Downloading the latest 6.0.1 firmware and flashing via ODIN took care of my problem.

test

Hi,
coud you please give us the link of the latest 6.0.1 firmware pl ?
Ths

Bishopandme said:
Hi,
coud you please give us the link of the latest 6.0.1 firmware pl ?
Ths
Click to expand...
Click to collapse
Download it from Sammobile
Sent from my SM-A9100 using Tapatalk

i agree the update from the settingApp and my G935fd makes bootloop.

hi!
i just agree to the update from my phone, he download the update and start install it. i had 60% of battery.
in the end of the update, the phone is stock with Samsung logo and make a 2 restart until he show my black screen and blue light.
i try to flash new ROM from samoblie. with i chose g935fd. and he back to do a 2 restart and blue light.
the phone is a gift i do not have warranty. the phone is international from Emirates
i need some help plz! i try fix him a 4 days.
in odin mode:
product name: SM-g935f
current binary: samsumg official
system status: custom
frp lock: on
secure download : enabled
warranty void : 0 (0x0000)
rp swrev : B:2 k:0 s:0

Download Samsung smart switch and install through that

in the smart switch it write "model are not supported "

Hello guys, I'm also facing the same issue. My phone is the S7 Edge duos black and never been flashed but has gone through an update from Marshmallow to Nougat. The problem is, one day it suddenly restarts itself and gets the bootloop issue everyone is facing. I can't even go to recovery mode to wipe cache partition as instructed everywhere.
I already tried to flash the phone using the firmware available on Sammobile.com but it still experiencing the bootloop right after it has been completely flashed.
Please help,
Hex

ByPass FRP Samsung Galaxy S8 need help

Hello guys. I know there are many topics about this, but I need a help about my Samsung Galaxy S8 (normal one, not Plus or Edge) G950F.
I tryed many method and I saw many videos and guides, but still it doesnt work.
My Galaxy S8 is brand with Tim (Italy) so I dunno if this could create issues or not.
I downloaded Combination Firmware 8.0 but I always have the error "SW REV. CHECK FAIL (BOOTLOADER) DEVICE: 2, BINARY: 1" on Mobile and Fail on Odin... this just can mean that the Combination Firmware isnt the right one.
I downloaded the right 8.0 Tim Original Firmware and tryed with Odin. It pass and everything go well, but still ask me for the old Account Gmail to verify the Account etc even if Odin did good.
I guess that I need to use that Combination first and put USB Debug (as I'm seeing in many videos) but I can't put this Combination Firmware for the error I said above.
What can I do? What is the right Combination file for a Galaxy S8 8.0 Tim (Italy)? I can't now naither turn on the device because it says to me in loop "An error has occured while updating the device software. Use the Emergency recovery function in the Smart Switch PC Software" in a green screen.
Thanks for any help you can give. I just want use back this mobile.

Did you tried to boot in download mode and then use smart switch ? Smart switch can recognize a phone when you boot at recovery. Then try to repair.
Concerning the combination this error mean that the combination file are too old. I had the same issue long time ago ( Device 2 Binary 1).
What mean the Google Gmail thing ? At boot they ask you the mail ? Why don't enter it then ?
Tell me if something worked. Try to find a newer "combination".

SoDeadly said:
Did you tried to boot in download mode and then use smart switch ? Smart switch can recognize a phone when you boot at recovery. Then try to repair.
Concerning the combination this error mean that the combination file are too old. I had the same issue long time ago ( Device 2 Binary 1).
What mean the Google Gmail thing ? At boot they ask you the mail ? Why don't enter it then ?
Tell me if something worked. Try to find a newer "combination".
Click to expand...
Click to collapse
I can't enter the Account Verification because the one who used this phone wont tell me the email and psw for it (he was the partner of my mom, but now they fighted and my mom wanted back her's phone.. but now, for vengeance/spite he wont tell us his data). I knew about Combination was old but where can I find the newer one? I am surfing on internet and can't find the right one I tryed many). My Firmware code is 8.0.0/R16NW/G950FXXU2CRED so I need a Combination Firmware eligibile with that.
I cant access the Device to install Smart Switch etc.

You don't need to access to the device. Just download the Samsung utility on your computer and connect your phone thought the download mode.
The name of the Samsung thing is Samsung Kies or something like that. Search for it.
And actually I never saw a phone asking for account verification ... I can't really help if this method don't work.
---------- Post added at 02:08 PM ---------- Previous post was at 02:07 PM ----------
Or, flash twrp. Obviously the warranty will trip. And then delete everything, also the system. Then install back the firmware through Odin

Naruke said:
Hello guys. I know there are many topics about this, but I need a help about my Samsung Galaxy S8 (normal one, not Plus or Edge) G950F.
I tryed many method and I saw many videos and guides, but still it doesnt work.
My Galaxy S8 is brand with Tim (Italy) so I dunno if this could create issues or not.
I downloaded Combination Firmware 8.0 but I always have the error "SW REV. CHECK FAIL (BOOTLOADER) DEVICE: 2, BINARY: 1" on Mobile and Fail on Odin... this just can mean that the Combination Firmware isnt the right one.
I downloaded the right 8.0 Tim Original Firmware and tryed with Odin. It pass and everything go well, but still ask me for the old Account Gmail to verify the Account etc even if Odin did good.
I guess that I need to use that Combination first and put USB Debug (as I'm seeing in many videos) but I can't put this Combination Firmware for the error I said above.
What can I do? What is the right Combination file for a Galaxy S8 8.0 Tim (Italy)? I can't now naither turn on the device because it says to me in loop "An error has occured while updating the device software. Use the Emergency recovery function in the Smart Switch PC Software" in a green screen.
Thanks for any help you can give. I just want use back this mobile.
Click to expand...
Click to collapse
The combination firmware needs to match the current firmware of the phone. Example if you have CRC7 then you need combination firmware CRC7

Please help, can't find combination file for sm-g9500 for latest upgrades. Firmware G9500ZHU2CRE1

Test Device and aboot -2???

Ok so the phone i have is/was actually a G935T, and had G935T firmware (BRC1) even though it says G935A on the board inside the phone. I tried to flash a different firmware, foolishly without turning off FRP, or turning on OEM, yeah im dumb. I ended up being stuck with the SBL error upload mode and couldnt even get back to download mode no matter how many times i tried, eventually i learned about EDL mode and took the phone apart and shorted the TP and re programmed the phone etc. and got it back to download mode.
Everything i flashed would always be successful in Odin, however nothing would ever boot past the looping S7 edge boot screen and recovery on every single firmware would also loop and ultimately give me kernel panic errors. i began to suspect that maybe i left something unplugged inside so i took it apart again and tried to keep the heat shield pressed down a bit more (since i had to open it up to access the test point) as i assembled the phone back together. No more kernel panics, but the boot looping was still present. I have tried G935T, A, P, V and U firmware and all of them do the same thing. Ive used the proper PIT files.
To make things worse, i flashed Oreo without realizing that i was putting my bootloader in handcuffs. To make things even MORE worse, i used a tool which claimed to convert an odin archive to be ADB enabled. now my device boots and says S7 edge etc, but then immediately goes to SBL error upload mode. Recovery still loops. Whats interesting though, is that since i used the converted archive, my device says exactly this in download mode:
ODIN MODE (HIGH SPEED)
PRODUCT NAME: SM-G935A
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
FRP LOCK: ON
WARRANTY VOID: 0xffffffff (0x0)
QUALCOMM SECUREBOOT: ENABLE fffffffe
RP SWREV: B-2 (-2, -2, -2, -2, -2) K8 S8
RP SWREV: TEST DEVICE
SECURE DOWNLOAD: ENABLE
IDDQ: G(25), S(7) mA
CPU SERIAL NUM : 0X1b9cea13
Fused open loop voltage: 1030mv
RPMB PROVISIONED
Any help would be much appreciated. Its going on nearly a month now trying to get this thing to work. I dont care about warranty, i dont care about knox i just want my phone to work....i cannot find any information about test device, how to go back to system status official or how to properly reformat all partitions that effect FRP or whatever the hell is locking me out of it. Also i am now not even able to flash ANY firmware because it keeps failing saying something about aboot fused -2 and none of the firmware i have will successfully flash. Im stumped.

I called a repair shop today and they want to charge me $30.00 to flash it with what they have. That seems a bit high to be honest. Should only take about 10 minutes right?

How to change Fuse -2 -> 1
Elem3nt0 said:
I called a repair shop today and they want to charge me $30.00 to flash it with what they have. That seems a bit high to be honest. Should only take about 10 minutes right?
Click to expand...
Click to collapse
Fuse -2 happened to my T380 Tab A tablet when I flashed wrong aboot and boot in the same TAR package.
So steps to fix it:
find the right combination firmware;
unzip it with 7zip archiver;
download TAR_MD5_PACKAGER;
open folder with unzipped comb_firmware and delete all files below from it:
-aboot,
-apdp,
-boot,
-devcfg,
-msadp,
-rpm,
-sbl1,
-tz.
copy all files what left to TAR_MD5_PACKAGER\parts;
start TAR_MD5_PACKAGER and press 1 to make tar file;
flash this file with Odin as AP;
now the fuse should switch to 1;
next flash the full combination file or stock firmware.
FUSE Number stands for software version,
samsung has protection against downgrading software,
So once you flashed firmware with number 2 in it, the device will change the fuse to 2 and after that
you will not able to flash anything less than with number 2 and so on.

S7 edge up and running
Dude thanks a lot!!! I read through multiple threads. Some more technical than others but this one was plain simple and it worked. Some of the files I deleted were a bit different, but hey, it got bit to work. One other thing for anyone experiencing the same issue, just look for a combination file matching your phones actual bootloader. Once you find it, just start deleting the files Odin is indicating are not letting the flash complete. In my case, files: hyp.mbn, pmic.elf, emmc_appsboot.mbn, xbl.elf. once I deleted those files I was golden. :laugh::laugh::laugh:

HI
I have smiliar problem.
I have a problem with a friend's phone. they give S7 Edge to the service because he have problem witch turn on telephone
When he received the phone displays an error: "An error has occured while updating software.. Use the Emergency recovery function in the Smart Switch PC"
Smart Swhitch doesn't recognized the phone
I try update firmware with odin but when i flashing i have error: SV rev. check fail(bootloader) Device: -1 Binary: 6
I try to insert TWRP and i have next error: Custom binary (recovery) blocked By FAP lock
I can not insert custom recovery witch TWRP, and I don't have any idea what official rom was uploaded last time :/
Sorry for my English :/

I DONT KNOW which direction to go

Ok so the phone i have is/was actually a G935T, and had G935T firmware (BRC1) even though it says G935A on the board inside the phone. I tried to flash a different firmware, foolishly without turning off FRP, or turning on OEM, yeah im dumb. I ended up being stuck with the SBL error upload mode and couldnt even get back to download mode no matter how many times i tried, eventually i learned about EDL mode and took the phone apart and shorted the TP and re programmed the phone etc. and got it back to download mode.
Everything i flashed would always be successful in Odin, however nothing would ever boot past the looping S7 edge boot screen and recovery on every single firmware would also loop and ultimately give me kernel panic errors. i began to suspect that maybe i left something unplugged inside so i took it apart again and tried to keep the heat shield pressed down a bit more (since i had to open it up to access the test point) as i assembled the phone back together. No more kernel panics, but the boot looping was still present. I have tried G935T, A, P, V and U firmware and all of them do the same thing. Ive used the proper PIT files.
To make things worse, i flashed Oreo without realizing that i was putting my bootloader in handcuffs. To make things even MORE worse, i used a tool which claimed to convert an odin archive to be ADB enabled. now my device boots and says S7 edge etc, but then immediately goes to SBL error upload mode. Recovery still loops. Whats interesting though, is that since i used the converted archive, my device says exactly this in download mode:
ODIN MODE (HIGH SPEED)
PRODUCT NAME: SM-G935A
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
FRP LOCK: ON
WARRANTY VOID: 0xffffffff (0x0)
QUALCOMM SECUREBOOT: ENABLE fffffffe
RP SWREV: B-2 (-2, -2, -2, -2, -2) K8 S8
RP SWREV: TEST DEVICE
SECURE DOWNLOAD: ENABLE
IDDQ: G(25), S(7) mA
CPU SERIAL NUM : 0X1b9cea13
Fused open loop voltage: 1030mv
RPMB PROVISIONED
Any help would be much appreciated. Its going on nearly a month now trying to get this thing to work. I dont care about warranty, i dont care about knox i just want my phone to work....i cannot find any information about test device, how to go back to system status official or how to properly reformat all partitions that effect FRP or whatever the hell is locking me out of it. Also i am now not even able to flash ANY firmware because it keeps failing saying something about aboot fused -2 and none of the firmware i have will successfully flash. Im stumped.