Database Users

Samsung galaxy core prime stuck in boot screen,unable to install software using kies

My phone went down one day when I switched off the alarm by pressing the power button.
and from then on when switching on, it stays on the boot screen
Unable to enter recovery mod and unable to install software via Kies
Phone not yet rooted,approximately 1-year use, lollipop 5.0.2 , Model : SM G360FY/DS
Any have any idea what might have happened and any solution?

trickster10 said:
My phone went down one day when I switched off the alarm by pressing the power button.
and from then on when switching on, it stays on the boot screen
Unable to enter recovery mod and unable to install software via Kies
Phone not yet rooted,approximately 1-year use, lollipop 5.0.2 , Model : SM G360FY/DS
Any have any idea what might have happened and any solution?
Click to expand...
Click to collapse
I don't have your model of phone, I've got SM-S820L. Have you tried booting into ODIN mode?
If you haven't tried that, I would do so and try using ODIN to flash a firmware update. You will need Samsung Drivers, a new release of ODIN3, and Kies or Kies3.
There are some good guides on this site that can push you along your way to full recovery of your phone.:good:

Psilocelium said:
I don't have your model of phone, I've got SM-S820L. Have you tried booting into ODIN mode?
If you haven't tried that, I would do so and try using ODIN to flash a firmware update. You will need Samsung Drivers, a new release of ODIN3, and Kies or Kies3.
There are some good guides on this site that can push you along your way to full recovery of your phone.:good:
Click to expand...
Click to collapse
TRIED BUT STILL NO LUCK:crying
People at service center said to change the board of the phone and it costs around 70$.
IS THEIR NO OTHER WAY?
NO CHANCE OF GETTING A NEW PHONE

I'm sending you a PM right now my friend!

My lovely s7 edge turned into metal brick

Wanted to find some deleted videos on my device and found some aplications that needed root to work ,
so I installed odin , downloaded some root and flash device , odin said "PASS" but my S7 were stuck at booting screen(just showing logo)
I restarted it ,tried everything from safe mode to factory reset , didn't boot , tried to flash one more time , it was stuck at connecting ,
so I made my phone brick , what can I do to fix this if I even can ?
I know im idiot I had 0 skill with this but I was saving for a long time to get this phone and this shall not be our last moment.
Model SM-G935F
I was using root from rootjunkysdl site, (Samsung_G935x_EX_Rooted-BOOT.zip)
I would realy appreciete any help since on reddit and android central my thread is ignored.

download samsung drivers to your computer, connect to smart switch click on more then emrgerency initialization and recovery follow instructions.

Im not trying to recover files , im trying to unbrick my phone

SmartSwitch has a phone firmware recovery option also.
Sent from my SM-G935F using Tapatalk

Go to sammobile and download the latest firmware for your phone. Hold volume down, home and power to boot into download. Connect phone to PC and use Odin (if Linux use Heimdall) to Flash the firmware. If you need more guidance you can find info on here or Google about flashing with Odin on our device.

SM-G935FD Bootloop, can't enter recovery menu

Hi everybody..
first thing first, sorry for my bad english..
I got my samsung S7 Edge (SM-G935FD) trapped on bootloop since last week. i tried to enter recovery menu, but it's not work. the device stuck at android robot picture.
my phone can enter download mode. i already tried to reflash it using smart switch. but, after i enter model name and S/N, smart switch shows that SM-G935FD does not support initializing. please contact our service center.
i have no idea what happened to my phone. it works good until last week.
anybody have any idea how to fix my phone?
i have unroot phone and stock firmware.
please help me..
Thanks...

Odin.
Odin is your God.
Try Odin.

Core3Trio said:
Hi everybody..
first thing first, sorry for my bad english..
I got my samsung S7 Edge (SM-G935FD) trapped on bootloop since last week. i tried to enter recovery menu, but it's not work. the device stuck at android robot picture.
my phone can enter download mode. i already tried to reflash it using smart switch. but, after i enter model name and S/N, smart switch shows that SM-G935FD does not support initializing. please contact our service center.
i have no idea what happened to my phone. it works good until last week.
anybody have any idea how to fix my phone?
i have unroot phone and stock firmware.
please help me..
Thanks...
Click to expand...
Click to collapse
Hey u using ...9350fd ..me ..too volte is not working mate help .....

I have sam issue on samsung a5 (a510fd-2016) indian version and try to flash by different firmware but flashing failed at cm.bin file i used a latest firmware also so i want to software upgrade by samsung smart switch but its say a510fd does not support initializing if any one have a proper idea please share

ByPass FRP Samsung Galaxy S8 need help

Hello guys. I know there are many topics about this, but I need a help about my Samsung Galaxy S8 (normal one, not Plus or Edge) G950F.
I tryed many method and I saw many videos and guides, but still it doesnt work.
My Galaxy S8 is brand with Tim (Italy) so I dunno if this could create issues or not.
I downloaded Combination Firmware 8.0 but I always have the error "SW REV. CHECK FAIL (BOOTLOADER) DEVICE: 2, BINARY: 1" on Mobile and Fail on Odin... this just can mean that the Combination Firmware isnt the right one.
I downloaded the right 8.0 Tim Original Firmware and tryed with Odin. It pass and everything go well, but still ask me for the old Account Gmail to verify the Account etc even if Odin did good.
I guess that I need to use that Combination first and put USB Debug (as I'm seeing in many videos) but I can't put this Combination Firmware for the error I said above.
What can I do? What is the right Combination file for a Galaxy S8 8.0 Tim (Italy)? I can't now naither turn on the device because it says to me in loop "An error has occured while updating the device software. Use the Emergency recovery function in the Smart Switch PC Software" in a green screen.
Thanks for any help you can give. I just want use back this mobile.

Did you tried to boot in download mode and then use smart switch ? Smart switch can recognize a phone when you boot at recovery. Then try to repair.
Concerning the combination this error mean that the combination file are too old. I had the same issue long time ago ( Device 2 Binary 1).
What mean the Google Gmail thing ? At boot they ask you the mail ? Why don't enter it then ?
Tell me if something worked. Try to find a newer "combination".

SoDeadly said:
Did you tried to boot in download mode and then use smart switch ? Smart switch can recognize a phone when you boot at recovery. Then try to repair.
Concerning the combination this error mean that the combination file are too old. I had the same issue long time ago ( Device 2 Binary 1).
What mean the Google Gmail thing ? At boot they ask you the mail ? Why don't enter it then ?
Tell me if something worked. Try to find a newer "combination".
Click to expand...
Click to collapse
I can't enter the Account Verification because the one who used this phone wont tell me the email and psw for it (he was the partner of my mom, but now they fighted and my mom wanted back her's phone.. but now, for vengeance/spite he wont tell us his data). I knew about Combination was old but where can I find the newer one? I am surfing on internet and can't find the right one I tryed many). My Firmware code is 8.0.0/R16NW/G950FXXU2CRED so I need a Combination Firmware eligibile with that.
I cant access the Device to install Smart Switch etc.

You don't need to access to the device. Just download the Samsung utility on your computer and connect your phone thought the download mode.
The name of the Samsung thing is Samsung Kies or something like that. Search for it.
And actually I never saw a phone asking for account verification ... I can't really help if this method don't work.
---------- Post added at 02:08 PM ---------- Previous post was at 02:07 PM ----------
Or, flash twrp. Obviously the warranty will trip. And then delete everything, also the system. Then install back the firmware through Odin

Naruke said:
Hello guys. I know there are many topics about this, but I need a help about my Samsung Galaxy S8 (normal one, not Plus or Edge) G950F.
I tryed many method and I saw many videos and guides, but still it doesnt work.
My Galaxy S8 is brand with Tim (Italy) so I dunno if this could create issues or not.
I downloaded Combination Firmware 8.0 but I always have the error "SW REV. CHECK FAIL (BOOTLOADER) DEVICE: 2, BINARY: 1" on Mobile and Fail on Odin... this just can mean that the Combination Firmware isnt the right one.
I downloaded the right 8.0 Tim Original Firmware and tryed with Odin. It pass and everything go well, but still ask me for the old Account Gmail to verify the Account etc even if Odin did good.
I guess that I need to use that Combination first and put USB Debug (as I'm seeing in many videos) but I can't put this Combination Firmware for the error I said above.
What can I do? What is the right Combination file for a Galaxy S8 8.0 Tim (Italy)? I can't now naither turn on the device because it says to me in loop "An error has occured while updating the device software. Use the Emergency recovery function in the Smart Switch PC Software" in a green screen.
Thanks for any help you can give. I just want use back this mobile.
Click to expand...
Click to collapse
The combination firmware needs to match the current firmware of the phone. Example if you have CRC7 then you need combination firmware CRC7

Please help, can't find combination file for sm-g9500 for latest upgrades. Firmware G9500ZHU2CRE1

Stuck on "start up failed"

Hello guys,
just received S7 (G930V) and I need to fix it. previous owner tried to flash exynos? rom onto it so now im stuck here (see image) I can¨t use ODIN, because it didnt recognize this device, (but Korean 930s does) and even it restarting automatically every few seconds and its shows "This is old binary, please update latest binary! (boot.img)"
Can you help me with this please?

SkopiX said:
Hello guys,
just received S7 (G930V) and I need to fix it. previous owner tried to flash exynos? rom onto it so now im stuck here (see image) I can¨t use ODIN, because it didnt recognize this device, (but Korean 930s does) and even it restarting automatically every few seconds and its shows "This is old binary, please update latest binary! (boot.img)"
Can you help me with this please?
Click to expand...
Click to collapse
Install all needed drivers, and dowload latest firmware here's link (you can try to flash universal snapdragon firmware):
Download Samsung Galaxy S7 SM-G930U USC USA (US Cellular) G930UUES8CRK1 firmware
Fast download latest Samsung Galaxy S7 firmware SM-G930U from USA (US Cellular) with G930UUES8CRK1 and Android version 8.0.0
www.sammobile.com

Thank you for your reply, but I cant flash new fw because my PC dont see phone and phone itself cant go to .proper download mode, only to this fail screen. I have drivers installed and PC and odin sees other galaxy s7 so its probably not driver issue..

SkopiX said:
Thank you for your reply, but I cant flash new fw because my PC dont see phone and phone itself cant go to .proper download mode, only to this fail screen. I have drivers installed and PC and odin sees other galaxy s7 so its probably not driver issue..
Click to expand...
Click to collapse
What is your Odin version???
Try this one:
Odin3 v3.12 (PrinceComsy).zip | Tool by psouza4 for Galaxy S7
PrinceComsy's Odin3 v3.12 hash skip version.
androidfilehost.com

I tried this one, but still, if I cant go to download mode, how can odin flash anything? So still no succes

SkopiX said:
I tried this one, but still, if I cant go to download mode, how can odin flash anything? So still no succes
Click to expand...
Click to collapse
If you press power more than 10 sec. and press vol- + home it drops you back to this mode???

yes, EVERY action ends on this screen if I hold power more than 1 sec +-, it just restarting and restarting...

Hey guys, just a fast info:
I bought this special cable from aliexpress
https://www.aliexpress.com/item/32966775653.html?spm=a2g0s.9042311.0.0.32dd4c4dxNJCmM
thanks to this I could boot into DL mode (which I couldnt before) and I flashed newest USA FW with odin
So now, its working!