Related
Hi!
Since yesterday my ok, windows, on and off hook and -- buttons aren't working anymore. The button in the middle and the cursor are still ok. Any ideas?
Due to the fact that the "--" (left and right) are not working I can't even do a hard reset.
Oliver
olfgti said:
Hi!
Since yesterday my ok, windows, on and off hook and -- buttons aren't working anymore. The button in the middle and the cursor are still ok. Any ideas?
Due to the fact that the "--" (left and right) are not working I can't even do a hard reset.
Oliver
Click to expand...
Click to collapse
Hi, I dont know what happened to your buddy, have you recently installed third party software? Anyway you can do an hard reset via the control panel under setting|system|
Hope this helps
[email protected]
Hi all,
OK I did a hard reset but it didn't work. Still no go :-(
The black coating is also peeling off. What a nice device.
mine just packed up too
more and more bugs are showing up every day passes... I somehow knew It would happen.. I don't think I'll take the risk of buying a p3600 through import without warranty after reading all these problems..
Good luck man
Trinity working well ..
KamaL said:
more and more bugs are showing up every day passes... I somehow knew It would happen.. I don't think I'll take the risk of buying a p3600 through import without warranty after reading all these problems..
Good luck man
Click to expand...
Click to collapse
While I dare not say my Trinity will be problem free, so far it has served me well. Everything is working as it should and the internal GPS has been enabled without a single problem. I'm on the test ROM (AKU3.3) and so far the performance is much better than my old Dopod 838 Pro (Hermes).
So far I have been very impressed with HTC built devices. A friend of mine's Dopod 838pro (Hermes) went into the pool accidentally, and it refuse to boot. After 3 days of intensive 'drying' it finally came back to life and it is working problem free until now.
alvinlim28 said:
While I dare not say my Trinity will be problem free, so far it has served me well. Everything is working as it should and the internal GPS has been enabled without a single problem. I'm on the test ROM (AKU3.3) and so far the performance is much better than my old Dopod 838 Pro (Hermes).
So far I have been very impressed with HTC built devices. A friend of mine's Dopod 838pro (Hermes) went into the pool accidentally, and it refuse to boot. After 3 days of intensive 'drying' it finally came back to life and it is working problem free until now.
Click to expand...
Click to collapse
Hehe, good to hear that....
I'm personally considering the hermes (TYTN) myself, because it's available here with warranty.. I hope the new ROM with AKU3.3 will improve it..
KamaL said:
Hehe, hood to hear that....
I'm personally considering the hermes (TYTN) myself, because it's available here with warranty.. I hope the new ROM with AKU3.3 will improve it..
Click to expand...
Click to collapse
My personal advise to you would be to test the 3G call on that device before you buy it. The only advantage the Tytn has over Trinity is:
1) Flash light & Macro Picture
2) Keyboard
3) Additional hard button (Messaging, IE, 3G call)
alvinlim28 said:
My personal advise to you would be to test the 3G call on that device before you buy it. The only advantage the Tytn has over Trinity is:
1) Flash light & Macro Picture
2) Keyboard
3) Additional hard button (Messaging, IE, 3G call)
Click to expand...
Click to collapse
The main reason I'm considering it is that i can buy it from here in israel with warranty, I don't wanna risk buying the trinity abroad.
I don't really care about 3G calls, I never use it, but 3G internet speeds aren't bad
the keyboard seems a big advantage over the trinity. The main advantage of the trinity is the small and pocket form factor, but unfortunately I can have it only by importing it
olfgti said:
Hi!
Since yesterday my ok, windows, on and off hook and -- buttons aren't working anymore. The button in the middle and the cursor are still ok. Any ideas?
Due to the fact that the "--" (left and right) are not working I can't even do a hard reset.
Oliver
Click to expand...
Click to collapse
did you get/find a fix?
drewy said:
did you get/find a fix?
Click to expand...
Click to collapse
No. It's @ HTC since 2 weeks
olfgti
ok cheers, if it's any help they have repaired mine twice for this issue. Originally it went in for the peeling paint, but while they had it the buttons failed the test so were replaced. Then when they bodged the repair and it went back again, again the buttons failed the test and they replaced again.
Then when I get the phone back...the buttons don't work! Incidently before they started repairing the phone I never had a problem with the buttons
Hi!
I know that this thread is quite old but I prefer to post in this thread rather than opening a new one (sorry if I am not doing well but I am new at the community )
Yesterday I was working on a P3600 and suddenly all buttons stop working. The irDA also did not work. I have left the phone all the night without the battery (I really don't know what I was trying to achieve ), and this morning the buttons (and the irDa) did not work yet. Now, after a hard reset, it seems that all is working as it should.
My questions are, why after a hard reset? (it seems to point out a software issue); is this problem related to the touch screen problem I've been reading about in the forum? (perhaps the cause is the same); and finally, is it likely to appear again?
Thanks in advance
ROM version: 1.15.412.2 10/23/06 (original one)
Radio version: 1.20.00.11
ExtROM version: 1.15.412.101
My D-pad select, down, right and OK have been getting steadily worse requiring more pressure to use. Mine isn't software related. Just sent it back today asking for the black peeling issue to be repaired as well.
I held out as long as I could hoping that any issues had been resolved by HTC. I'll post when I get it back.
Baxter said:
My D-pad select, down, right and OK have been getting steadily worse requiring more pressure to use. Mine isn't software related. Just sent it back today asking for the black peeling issue to be repaired as well.
I held out as long as I could hoping that any issues had been resolved by HTC. I'll post when I get it back.
Click to expand...
Click to collapse
did u get it back? my keys also stopped working..windows + ok + up key.
should i contact htc or e-tailer?
You will probably have to get return authorization through your retailer.
It's been about 2-1/2 weeks and no word from HTC. I emailed them today. I will be sure to post when I get it back regarding GPS Rom and peeling.
Just got it back - all pretty again. They replaced the bezel and switch board. Still has old rom but I am happy.
lobo0987 said:
Hi!
I know that this thread is quite old but I prefer to post in this thread rather than opening a new one (sorry if I am not doing well but I am new at the community )
Yesterday I was working on a P3600 and suddenly all buttons stop working. The irDA also did not work. I have left the phone all the night without the battery (I really don't know what I was trying to achieve ), and this morning the buttons (and the irDa) did not work yet. Now, after a hard reset, it seems that all is working as it should.
My questions are, why after a hard reset? (it seems to point out a software issue); is this problem related to the touch screen problem I've been reading about in the forum? (perhaps the cause is the same); and finally, is it likely to appear again?
Thanks in advance
ROM version: 1.15.412.2 10/23/06 (original one)
Radio version: 1.20.00.11
ExtROM version: 1.15.412.101
Click to expand...
Click to collapse
I've had the exact same thing happen twice now. Everything is going along fine and then suddenly all the keys stop working until I do a hard reset. The touch screen keeps going as normal. I haven't tested the IRDA but it appears that USB and active sync don't want to go either. A hard reset solves the problem but then I have to reinstall things which is annoying.
There must be other people out there with this problem. Has anyone come up with a solution?
I don't think, that there will be a fix...seems like a hardware problem to me.
I have nearly the same....the red and the green call buttons don't work properly!
For me they work immediately after a soft reset and then stop again within about 30 seconds. Hardware or software? it would appear to be software but I had the same issue using the official T-Mobile WM5 and still umder Black Satin WM6.....
think I'll flash back to official ROM and take it into the shop tomorrow!
Hello, i switched on my dual this morning to find the screen mirrored, it seemed to be working fine, just that all the text and graphics were as though it were viewed in a mirror.
A reset solved this. I have not installed any new software on the device. Its a ordinary Orange UK rom. Its been working fine since end of November when i bought it and this is the first time this has happened.
Any idea what happened to it?
Cheers
No idea mate, but it happened to me once last week.
I was rushing out the door trying to load the MP3 player, a text came in and I assumed it was because I had mashed too many onscreen buttons at once. Obviously not, going by what you've just said.
Like you though, a soft reset righted the screen and it hasn't happened since. My other thought was that it might be hardware-related - loose connection or something similar
Sounds cool
Never had this issue though.
I had exactly the same problem! It's obvious that it is a common failure, so I hope we'll get a patch soon to solve all these issues.
Hello guys,
I have a very strange but really bad problem: my omnia7 can't stay in standby.
When I press the power button, to turn off the screen and go in standby (so not the full turn off), my Omni7 wakes up alone, going on the unlock screen. In the same time, the phone rings with the ring that is played when you connect the phone for charging.
I've tried reboot, reset, hardreset, removing the sim-card, turning on/off "battery saver options" ... still that issue :crying:
Anyone has an idea?
I've flashed with a cooked rom (xda-devs Omnia7 Tango V4.0)
my current config :
OS version : 7.10.8779.8
hard version : 3.1.0.4
soft radio version : 2424.11.7.2
hard radio version : 0.0.0.800
loader version : 4.10.1.9
SOC version : 0.36.2.0
Thanks to any ideas, because that problem is killing me
my phone started doing this late last night too! i thorght it was because rain had gone into the power socket but if others are having same problem at the same time maybe not?
has your phone been exposed to water at all recently? is your phone jailbroken? cant realy think of other reasons
the problem stops when the phone is plugged in. is there anything that can trick the phone to thinking it is on charge? I have wphtweaks installed but the options there are not able to stop it
Hi,
I can't remember if my phone has been wet :/ I take care, so my phone never received water. But when I'm outside, under the rain, it's possible.
Today it was better, just a few times my phone wakes up alone.
I'll give you feedback in the next days. Let me know about yours
I managed to trick my phone into silence a few times earlier but it was difficult and then only lasted 5-10 minutes.
if yours didnt get wet it seems unlikely to do with water but I left mine ontop of the aga after removing the battery and over a relativly cool part. A few hours later and it seems to be working fine now.
I will report back if the issue arises again.
EDIT: Ahhhh!! STOP THE RINGING!!! started again this morning
Mine too !
This morning ... the ringing awakening problem !!!!!
But it was better this afternoon.
Really I don't know what happens.
Are we only two persons in the xda world with this problem????
this is realy weird now! mine was doing it in the morning but since about 12pm - 1pm it has been fine! I feel like its something to do with an installed homebrew app maybe.
I also have a custom rom but mine was flashed a long time ago and much older than yours. not sure which version
EDIT (1:10pm GMT): no problems since yesterday
EDIT2 (1:30pm GMT): again i spoke too soon!
Did you guys get this problem sorted out? Had the same problem recently and tried all the suggestions in other threads (bend USB pin, Reset/Restore Device etc) but nothing fixed it, so after being woken at 3am by constant charging tone, took to T-Mobile shop. They said it was a software problem. I said I'd tried all that and the most likely cause I'd seen on the internet was a duff USB port.
Anyway, T-Mobile sent it off for repair and 7 days later - returned and fixed. The repair sheet said software upgrade, but the phone had been reset to bog standard Phone 7, so unlikely. The T-Mobile repair tracking site (excellent) which shows blow-by-blow trace of what and where, showed initial software upgrade/no fix but I used their "contact us" facility to suggest a USB problem and by magic the repair tracking log showed a replacement USB port.
BTW - had to resort to an iphone and HTC android while Omnia was off for repair. Now I know why I like Phone 7 and can't wait for 8. The iphone GUI is so last decade and Android GUI is really just a copy of Windows 6.5 with XDA developers' tweaks isn't it.
Hi Wuzzok,
what do you mean by "bend USB pin" ?
Anyway, it seems like it's finished for me. I didn't get tht strange bug (soft/hard bug???) for a very long time. I just hope it's really over !
Same problem
Hi Folks,
I have the same problem, too. Yesterday afternoon on my way home the phone started ringing with the USB plug sound and always started up itself from standby mode.
As I have a custom ROM (mi7ROM) I first thought it could be a problem with the ROM - although I could not really believe it since it was running stable for months now. I flashed it again and nothing changed - still ringing and starting up itself
I managed to get rid of the sound by deleting the entry in the registry key "Local Machine\Current User\ControlPanel\Sounds\BatteryCharging\Sound" but that does not solve the real problem.
After reading here and in some other WP7 blogs I am sure that this is a hardware problem with the USB plug unit. As my phone is just 11 months old I opened an online ticket at "SAMSUNG online repair service" who promise to answer in the next 24 hours. So I just have to wait and see...
actual state
neutom said:
Hi Folks,
I have the same problem, too. Yesterday afternoon on my way home the phone started ringing with the USB plug sound and always started up itself from standby mode.
As I have a custom ROM (mi7ROM) I first thought it could be a problem with the ROM - although I could not really believe it since it was running stable for months now. I flashed it again and nothing changed - still ringing and starting up itself
I managed to get rid of the sound by deleting the entry in the registry key "Local Machine\Current User\ControlPanel\Sounds\BatteryCharging\Sound" but that does not solve the real problem.
After reading here and in some other WP7 blogs I am sure that this is a hardware problem with the USB plug unit. As my phone is just 11 months old I opened an online ticket at "SAMSUNG online repair service" who promise to answer in the next 24 hours. So I just have to wait and see...
Click to expand...
Click to collapse
Samsung sent me an offer to send the phone in for repair - but what should I say, the problem solved itself. For two days now the phone works normal again. So I had to cancel the service call .
mine hasnt done it in a long time either. looks like its just a temporary thing. I wonder what caused it! For me it started after I was using my phone in the rain and the usb slide was open so thats my suspect.
You may be right. Mine is "quiet" now, since a long time. Water may be the cause.
Update
Hi folks,
mine is mostly quiet again, too. Only few incidents "happen" but they do not last very long - only a few minutes. It's somehow spooky but I do not want to send it in to Samsung now when the error it not constantly reproducible.
I agree with you that there might be a correlation with humidity although I am sure that it did never get wet and I almost always keep the USB-shutter closed. Who knows ...
Sent it in
Finally I sent it in for repair today. It started ringing permananently two days ago...
Now I have to wait and see.
Final state
Okay, I received it back... and it works.
First they did nod find and could not reproduce the failure and wanted to send it back - only with a new flashed image - but fortunately the technician called me and I could describe the problem again. After waiting a few hours, the fault appeared again and they decided to change the mainboard.
I hope, that's all :laugh:
Hello,
Me too it makes me after my omnia 7 is dropped in water, but problem solved.
Me too
WuzzoUK said:
Did you guys get this problem sorted out? Had the same problem recently and tried all the suggestions in other threads (bend USB pin, Reset/Restore Device etc) but nothing fixed it, so after being woken at 3am by constant charging tone, took to T-Mobile shop. They said it was a software problem. I said I'd tried all that and the most likely cause I'd seen on the internet was a duff USB port.
Anyway, T-Mobile sent it off for repair and 7 days later - returned and fixed. The repair sheet said software upgrade, but the phone had been reset to bog standard Phone 7, so unlikely. The T-Mobile repair tracking site (excellent) which shows blow-by-blow trace of what and where, showed initial software upgrade/no fix but I used their "contact us" facility to suggest a USB problem and by magic the repair tracking log showed a replacement USB port.
BTW - had to resort to an iphone and HTC android while Omnia was off for repair. Now I know why I like Phone 7 and can't wait for 8. The iphone GUI is so last decade and Android GUI is really just a copy of Windows 6.5 with XDA developers' tweaks isn't it.
Click to expand...
Click to collapse
Are you really sure that the problem is USB port.. Mine too behave like this. I've tried to remove battery, factory reseting, reflashing ROM. But nothing works. Mine is Samsung focus
post to remove
Hi guys,
New owner of a S4 (GT-I9505 international) here with a problem. 2 days ago I noticed the screen wasn't rotating anymore. I used to rotate it portrait/landscape in applications like Camera or Internet (browser). The moment when it started to bother me was when looking at pictures with the phone in portrait and the image was landscape. Trying to rotate the phone didn't help. It was frozen. I called a buddy of mine who has some experience with Samsung devices and told me to verify the "Auto-Rotation" settings. It was all OK and enabled. Then he suggested turning the phone off and pulling out the battery and SIM card for 5 minutes and putting it all back. This didn't help either. Finally we got to the point where he told me to enter *#0*# in the Phone dialing application. As you might already know, this code gives you access to the "testing" hidden utility. There I tested all the options available. Everything was fine except for the Sensors and SensorHub Selftest.
In the Sensors section, all the tests failed, starting with the Accelerometer and ending with the Temperature. I uploaded screenshots taken during the tests. Please remember this started 2 days ago. Before this it was working perfectly. I don't recall making and major changes like updating any OS components or installing/running stress utilities related to sensors or device behavior. After doing some research online and reading about other people's similar problems I got to the point where I started to suspect a problem with the MCU (Micro Controller Unit). This component, according to Samsung, controls all the sensors and reads raw data from them without accessing the AP (Application Processor) this way extending the battery life. I believe the problem is here because it seems odd that none of the sensors are working all of a sudden. Can this component put the sensors into a sleep state and shut them down completely? Might this be the case here?
Below are the solutions I tried in order to revive the MCU and finally the sensors. I was all without success:
1) Turned off the phone and pulled the battery and SIM out. Put the back in after about 5 minutes. Result: sensors not working.
2) Reset to factory-settings from the settings option while the phone was in the working state (turned on). Result: sensors not working.
3) Rooted the phone, installed Clockwork Recovery, made a full system and applications backup and then installed custom ROM (two actually: PACMan, Google Play Edition (4.3)). I did this in order to exclude a problem related to drivers in the stock Samsung ROM, even if it was logical that Samsung being the owner and manufacturer of the device might have the "best" drivers and applications for inquiring the device components/sensors. I am aware this ended the warranty for me, but can I know it can easily be undone. Result: sensors not working.
4) Restored the original stock Samsung ROM. Result: sensors not working.
The utilities used for sensor testing were: Sensor Kinetics and Sensor Tester. Both can be found in the Play Store. On my wives phone, which is an old HTC Desire, both utilities picked up the available sensors and created graphs with the results. On my S4, I only got blank charts/graphics/results. In Sensor Kinetics for the Gyro for example, the message was "Waiting for the Gyroscope sensor...", just that, stuck.
If there are any other guys (or ladies!) out there who encountered this awful experience, please reach out and tell me if you found any practical solution, any other then just taking the device back to warranty. I'm open to any suggestions.
Best regards,
Andrei
Most likely a defective device ... can't you claim warranty and sent it back?
Sounds like hardware failure. This would be an issue for Samsung to solve.
Sent from my GT-I9505
AvelonTs said:
Most likely a defective device ... can't you claim warranty and sent it back?
Click to expand...
Click to collapse
Unfortunately I bought it second-hand and it does not have any warranty. I guess it's one of those moments I wish I had patience and gathered more cash to buy a new one from the store. Anyway, it's my bad luck. I had it working perfectly for weeks after buying it. I will use it like this for the time being..
i´ve got the exact same problem since yesterday...
i think i´ll take it to the shop for warranty
I've got the exact same issue. All sensors are having the same issue. None are working,
I found out because my camera app was not switching between landscape and portait any more. All pictures are saved as landscape...
Called Samsung Netherlands and they told me to wipe my phone (still latest original stock ROM) and try again.
Making a backup now using Kies... and will hard reset it afterward and check the sensors.again.
Probably not going to work... So I have to send it in...
darklord said:
I've got the exact same issue. All sensors are having the same issue. None are working,
I found out because my camera app was not switching between landscape and portait any more. All pictures are saved as landscape...
Called Samsung Netherlands and they told me to wipe my phone (still latest original stock ROM) and try again.
Making a backup now using Kies... and will hard reset it afterward and check the sensors.again.
Probably not going to work... So I have to send it in...
Click to expand...
Click to collapse
Hi there. I had same problem with sensors and MCU test failed, so i took phone to service. They said its hardware failure and replaced main board. Im picking phone tommorow and we will see...
Hi guys,
I took mine to a local phone service, not the official one, but they are an affiliate. They could not figure out exactly what the problem was so they replaced the logic/main board just for testing. It was all working fine. They called and informed me of the findings. Given the fact I don't have warranty for it, they suggested to send it to our main service in Bucharest where they have a more sophisticated testing equipment. It is possible to get a more precise answer regarding the defective component and maybe a less pricey solution to the problem. At this time, the only viable option is to get a new logic board in place, which is about to set me back 250 USD. I will get an answer from Samsung in Bucharest by tomorrow or the day after tomorrow.
I will get back to you with my final solution... hopefully something not so expensive
@darklord, @eweu: please post back you findings. Maybe in the future when some other unfortunate owner finds his way in here, will have a better understanding of whats on the plate for him.
Thanks,
Hard reset did not work as expected. Going to drop it off at a local official repair center....
S4 Sensors failing
I have the same problem with my S4 GT-I9505 device not auto-rotate, air gestures with gyroscope and accelerometer tests failing. S4 been back for 3 weeks to Samsung for repair came back and failed again after 1 week
KSal7506 said:
I have the same problem with my S4 GT-I9505 device not auto-rotate, air gestures with gyroscope and accelerometer tests failing. S4 been back for 3 weeks to Samsung for repair came back and failed again after 1 week
Click to expand...
Click to collapse
After installing some other ROM's and playing with different CSC's I have no sound and even no wireless and only Edge speeds on some ROM's. Restoring from backups, wireless came back and HSDPA+ also, but no luck with sound what so ever. Now, I have a tablet more or less. Thanks Samsung, this is great!
canaris1780 said:
After installing some other ROM's and playing with different CSC's I have no sound and even no wireless and only Edge speeds on some ROM's. Restoring from backups, wireless came back and HSDPA+ also, but no luck with sound what so ever. Now, I have a tablet more or less. Thanks Samsung, this is great!
Click to expand...
Click to collapse
Flashed I9505XXUDMH8_I9505OXXDMHA_BTU, sound and wlan working again. Previous problem with MCU/sensors still there.
i'm tired
canaris1780 said:
Flashed I9505XXUDMH8_I9505OXXDMHA_BTU, sound and wlan working again. Previous problem with MCU/sensors still there.
Click to expand...
Click to collapse
really i'm tired to solve this issue.
when i install new stock software the sensors work fine just a few minutes only yhen return to fail again.
i think its software issue and i'll solve it :good::good::good:
Sensors work again
:laugh: :victory:
Its work right now by itself
:crying:
after uploading the pictures its fail again
abdali_m2 said:
:laugh: :victory:
Its work right now by itself
:crying:
after uploading the pictures its fail again
Click to expand...
Click to collapse
I have the same thing here
all sensors are broken because of SensorHub BIN FW Version: AT0199999
then i try to update firmware with *#2663# it failed.
I have the same problem with my S4 GT-I9505.
Suddenly the device do not auto-rotate, and no air gestures with gyroscope and accelerometer are working.
The SensorHubTest end with FAIL.
Mid december I got one OTA firmware update and I didn't notice any problems first.
A few days after newyear I notice that my auto-brightness adjustment did not work properly.
Can't remember if auto-rotate didn't work when I notice the auto-brightness problem.
But finally I am here because I searched for sensors problems.
I did the SensorsHub Test with *#0*# and it ends with FAIL.
It seems that there is a problem with the 4.3x firmware.
With 4.2x all was fine.
Can anybody confirm my thoughts - that the firmware is broken and not the MCU itself?
What can we try? Downgrade? I read that one was lucky with "factory reset" but it didn't helped to revive the MCU of my device.
Thanks for reading
and answering
___
DK
Hi, i am a owner of a sch-i545 phone, and i have the same problem with the phone: no response of any sensor and a fail on test (or upgrade firmware) of the sensorhub.
At this time i was tried a lot of solutions: i was flashed stock firmware, custom firmware, and of course a factory reset (by the way, the first time with this problem was when i did it a single factory reset), its still broken the communication with the sensors.
I get back to life the phone when i upgrade the phone from 4.2 to 4.3 (sadly) and get lost when i update the binaries in super su (previously rooted with vroot).
Yesterday i give the phone to a technician (a close friend of another best friend), he will test the phone on this weekend to determine what is the problem to try to fix it.
When He fix this phone, i will post any news!
Regards.
remy1004 said:
At this time i was tried a lot of solutions: i was flashed stock firmware, custom firmware, and of course a factory reset (by the way, the first time with this problem was when i did it a single factory reset), its still broken the communication with the sensors.
I get back to life the phone when i upgrade the phone from 4.2 to 4.3 (sadly) and get lost when i update the binaries in super su (previously rooted with vroot).
Regards.
Click to expand...
Click to collapse
Thanks for your answer. I have hope that the next firmware will fix it.
What is strange that none of any reseller/privers know this problem. It seems that also Samsung has no knowledge about this special error.
Well if the next firmware didn't fix the problem, I can replace my model with a working one, that is what the guy at the phone shop offers to me.
___
DK
Same Problem Here
Hi guys, I'm new to this forum so be nice :angel:
I am having the same problem in that none of the sensors are working which indicates that it is a connection issue or the actual hub not working or the firmware and not the individual sensors themselves. I have thought about this and looked around and to me it seems like there are only 3 possibilities for the problem:
1) The SensorHub BIN FW Version is out of date and needs to be updated manually (not through *#2663 as it doesn't work)
2) There is a connection issue e.g. the cable from the sensorhub to the motherboard is loose or broken
3) The sensorhub is broken (not the sensors)
I will try to find the firmware files and see if I can do a manual update. If that fails I will open up the phone and see if the cable is connected/broken. If I still cannot solve the issue, I will have to take it to the shop and hope I can fix it off warranty (I bought it second hand)
Dan
shadowsoulxp said:
Hi guys, I'm new to this forum so be nice :angel:
I am having the same problem in that none of the sensors are working which indicates that it is a connection issue or the actual hub not working or the firmware and not the individual sensors themselves.
[...]
I will try to find the firmware files and see if I can do a manual update. If that fails I will open up the phone and see if the cable is connected/broken. If I still cannot solve the issue, I will have to take it to the shop and hope I can fix it off warranty (I bought it second hand)
Dan
Click to expand...
Click to collapse
Thanks Dan for your reply.
I assume that your S4 shows the same behaviour as my one and the phone is still working fine.
The sensorhubtest failed and your light sensor for automatic adjusting and the sensor for turning the display are not working.
What is really strange that I went to a vodafone shop in Hamburg and ask them if there is any other one having problems with the S4.
You know the answer? They where wondering and telling me that this is wierd and they heard the first time of such an issue from me.
I showed them the device and showed them how I test the sensors. *#0*# funny they didn't know this combo
I hope that you succeed and share your knowledge,
with best regards.
___
DK
my oneplus 5 was working fine before 4.5.13 ota update after that my phone doesnt rotate to left and gets inverted.I tried flashing other roms and hard reset but no luck.There are more users having problem after this update,any solution?
Pass the stock rom by adb sideload
Set the device to fastboot mode and connect the USB cable. Then type:
adb sideload rom.zip
For more information go to oneplus website.
Dewang p3100 said:
my oneplus 5 was working fine before 4.5.13 ota update after that my phone doesnt rotate to left and gets inverted.I tried flashing other roms and hard reset but no luck.There are more users having problem after this update,any solution?
Click to expand...
Click to collapse
You're correct dewang bro..
I've seen your video https://youtu.be/-wa-cO2e0EQ
Even I'm facing the same issue with my OnePlus 5, rotating sensor doesn't work for one side
GAMIT PRUTHVI said:
You're correct dewang bro..
I've seen your video https://youtu.be/-wa-cO2e0EQ
Even I'm facing the same issue with my OnePlus 5, rotating sensor doesn't work for one side
Click to expand...
Click to collapse
its wierd that 4.5.13 is causing this issue as permanent damage
Dewang p3100 said:
its wierd that 4.5.13 is causing this issue as permanent damage
Click to expand...
Click to collapse
Yesterday I went to OnePlus service center, they're asking me to pay 2900 INR for the sensor.
I've denied to pay and they rejected my devise by mentioning it as a physical damage
I bought my phone a few days back and noticed same funny behavior with compass (if not mistaken works with rotation sensor also). I gripped my phone firmly so my phone can't fly off from my hand, after that I gave it several sharp and sudden turns on both ends of 3 axis of rotation (X,Y,Z) my problem was solved. You can try it at your own peril. If you have positive results, let me know.
I had this too. Now I'll stay on OOS 4.10 after gettig it repaired for free.
Aalikhan said:
I bought my phone a few days back and noticed same funny behavior with compass (if not mistaken works with rotation sensor also). I gripped my phone firmly so my phone can't fly off from my hand, after that I gave it several sharp and sudden turns on both ends of 3 axis of rotation (X,Y,Z) my problem was solved. You can try it at your own peril. If you have positive results, let me know.
Click to expand...
Click to collapse
didnt help bro
Zocker1304 said:
I had this too. Now I'll stay on OOS 4.10 after gettig it repaired for free.
Click to expand...
Click to collapse
how are few models getting affected by update?
Dewang p3100 said:
how are few models getting affected by update?
Click to expand...
Click to collapse
No idea I guess we just had bad luck with the Mainboard. I don't think it had to do with the specific update.