I have a SKW-H0 (Blackshark 2, NOT A PRO) rooted it with magisk and then after a few months decided to uninstall it using the complete uninstall option in the app, after a restart the phone was bricked.
I managed to save it by flashing the DLT-H0 Rom but ideally I'd like to put the global android 10 or 11 Rom on it - how would I go about doing this?
I have no custom recovery, fastboot is enabled and so is usb debugging.
Thank you!
Could you give me rom so i can flash it?
Related
So im trying to root my oneplus 5 and i started off by using Lineage OS but i wasnt too happy with it and i liked Oxygen OS much better so i decided to go back to it and while doing so like an idiot i wiped everything in twrp including the storage with all my ROM files and the phone was bricked and after a long struggle i used the unbrick tool which is called MSM tool which installed oxygen 4.5.8 using some some Qualcomm mode or something and it booted and worked fine but ever since i wasnt able to download the oxygen 5.1.1 update through the phones update section, it reaches 100% and says signature verification failed and goes back to 5%. So i tried downloading the latest Open Beta from the OP site and tried local upgrade which said installation failed so i try installing it locally through the Oxygen Recovery but again Installation failed so i try unlocking the bootloader again and installing it through twrp and it just keeps showing the boot animation forever( i know people say be patient but i waited for 20 mins+). So i decided to use the unbrick tool again and now im stuck on the OOS 4.5.8 unable to update the phone.
I tried to flash the latest oreo through twrp several times and just tried flashing it through so many ways where none worked , even adb sideloading it worked till 47% and said installation failed and everytime this happens i have nothing left to do but use the tool and unbrick it again and this takes so much time as i have to unbrick and then do the first setup and then go to fastboot and unlock the bootloader and do the setup again and transfer the files and then install twrp and flash.
Nothing has worked so far
And now even when i go back to the 4.5.8 stock after unbricking for some reason it just doesnt connect to any wifi , it just says Connecting and then saved and then disabled and repeat, only my mobile data works.
I tried to flash lineage again but got an error 7 with it or something and im back to the stock unbricked state without wifi and all i can do is unlock bootloader and install twrp.
If anybody has any suggestions and can help me please do so immediately. I require my phone urgently and need to fix this fast.
Thank You !
(btw im in India and do local service centres fix such issues?)
Make sure you use newest twrp. And also flash firmware for 5.1.1
Vika__ said:
Make sure you use newest twrp. And also flash firmware for 5.1.1
Click to expand...
Click to collapse
i am using the latest codeworkx twrp 3.2.1 and when should i flash firmware? can you just give the process i should do? stuck at 4.5.8 without wifi with twrp and unlocked bootloader
Wipe everything except internal storage, after that click format data and type "yes" to accept. Then download oos 5.1.0 firmware from here https://sourceforge.net/projects/cheeseburgerdumplings/files/15.1/cheeseburger/firmware/ and lineageos 15 (or any rom you want now), gapps and move all 3 packages to your phone. Flash firmware first and then reboot to recovery. Then flash rom or gapps and reboot
You have to flash the latest TWRP from twrp.me, then download the latest OxygenOS build. Reboot into TWRP, wipe data, cache, system and flash the latest build, then just go to wipe > format data, type "yes" and reboot
Lol man your OP5 is not bricked, if you can boot on TWRP, you can install all that you want
I advise to Format Data/Storage, Wipe everything and install xXx 10.7 (OOS Custom with a great Aroma installer), choose decrypted, it's better if you want swtich rom in the future AOSP > OOS > AOSP
bro i have same probleme after install any rom custom or official , always stuck on boot logo , any solution ?
no solution??
Hi, I have a leeco pro 3 lex 727, and it was hard bricked but I revived it with qb loader. Now I have flashed the latest version of twrp and whenever I try to install any custom roms I get error code 7 (rom not built for device). Whenever I flash a stock rom It flashes within 3 seconds, but it stuck on the boot screen. My device boots to fast boot and TWRP. What do I do to install an os for the device. I have tried a variety of solutions from flashing modem to updating Twrp. Any Help?
So I've got a little problem with my Redmi Note 7 - I unlocked the bootloader, flashed the TWRP recovery via fastboot and flashed Magisk v19.3 to root it.
Everything works fine but when I try to download and install the official rom updates the phone just boots to recovery and after restart it says that the update wasn't successful.
Any way to fix it?
beybus said:
So I've got a little problem with my Redmi Note 7 - I unlocked the bootloader, flashed the TWRP recovery via fastboot and flashed Magisk v19.3 to root it.
Everything works fine but when I try to download and install the official rom updates the phone just boots to recovery and after restart it says that the update wasn't successful.
Any way to fix it?
Click to expand...
Click to collapse
Download latest Miui version ,Magisk and lazyflasher-no-verity-opt-encrypt
Wipe cache/Art
Install the rom using TWRP
Install magisk
Install lazy flasher
Reboot.
Every thing you need can be found in this link i have already downloaded it and put all the things in one folder.
https://1drv.ms/u/s!AuqQvn5aQs0xg_IU3fLQqFxu9pp-dg?e=JaoDdC
Dear good people, I am here with a problem. with my mi 9t after got my boot loader unlock yesterday, tried installing TWRP and succeed to install with ADB command. My Actual OS was 11.2.0 Global stable version.
However, whenever I tried to install any custom rom or any kind of rom though it, its shows installed but whenever i am reboot it , it vanishing and directly go to fastboot. ( Before I do the reboot, it shows "there is no OS on your system").
Please help me guys
You need to flash vbmeta along with the recovery, that should solve it
Are you using official twrp? There are several unofficial ones floating around that can give you this problem on 11.x, but I never had it with the official one (and I didn't flash vbmeta)
Hello everyone.
I made some test in installing some custom roms in some old devices always avoiding to install TWRP permanently on the drive (i used it in boot mode and then adb listen in TWRP and adb command from PC).
I've done this in order to preserve the stock recovery mode.
I decided to install pixel experience as my default rom in my redmi note 7 and i noticed that this rom will use OTA updates so i'm asking you if i should install TWRP (or other recovery images) permenently in order to make it work properly.
Another question that i have revolves around Magisk, is this tool needed in order to make pixel experience work fine?
BTW i don't understand why TWRP does not officially support RN7 lol (eventually i'll use a porting or another recovery )
Thank you everyone
First, sorry for not answering your main question but I'm more intrigued as to how you can flash a custom rom without using a custom recovery like TWRP. Also, is it possible to permanently install TWRP? How you do this?
Second, Magisk is not needed for the rom but allows some other customizations, fixes and root access.
you need some kind of custom recovery that supports your phone, its what allows you to install roms. There are a few out there such as TWRP, organge fox, etc. Chose whatever you like that has good support for your device.