Related
my device is samsung s3 neo i9300i.recently i install twrp 2.7.1.0 and accidently delete all partitions and system and data.so now there are no os system.and i cant boot my phone.phone stucks on samsung logo.but i can boot into twrp recovery mod.then i decide to flash stock rom throgh twrp recovery but it fails and also try cm 12.1 official and unofficial it also fails.its showing no md5 file found.patching system image unconditionlly and updating partitions.so what can i do.i dont have pc.so give me solution which can i solve with twrp 2.7.1.0 .and one que. can i install noble rom 2.1 on this mobile in this situation?please help me......
I think you still need to find any PC with samsung drivers installed and Odin. Boot into download mode (vol down + power) and flash service firmware to recover partitions. Maybe exist any other solutions, but this, IMHO, is what you need to do.
After installing cm12.1, doesn't it boot?
Don't worry about the md5 file warning or patching system unconditionally. If you got no errors (other than what i mentioned here), it should boot fine.
in twrp there is an option of terminal command.but i dont know how to use it.when i click to open this terminal conmand then open systems folders and files and bottom line there is a option of select current folder.so how can i use it to flash rom with this.anyone have idea then please help me
I several times wiped everything at once through TWRP, then just restarted into recovery, copied .zip files for the ROM and gapps from a computer and flashed them, so can't really see where is the problem in your case. Doesn't the PC find your phone as a storage drive after wipe and restart?
yesterday i successfully install nobel rom 2.1 in my device.but now problem is i cant boot my phone.its showing samsung logo and then automatically going in download mod.before this installation i several time wipe every partitition and succedsfully install noble rom 2.1 but cant boot my phone.problem always there.please please help me
Maybe the problem is with the ROM and it's incompability with your phone. What if through Odin you flash a stock ROM from a computer in download mode and then try another custom ROM?
But of course first try to enter recovery and directly flash (another) working ROM, because going through stock with Odin takes much more time and nerves. Also, with Odin you have to be extremely careful to use the exact stock ROM for your device, so this is kind of a last-case scenario.
Plz check the rom u r downloaded is not corrupted
Or download again by any other phone and save it to external sd card then plug it on ur s3 and flash it
plz can any provide me twrp nandroid backup of system and boot partition of s3 neo i9300i plz plz plz
because in my area downloading speed is too slow.so i cant download stock firmware.its getting corrupted.i try to download it 4 to 5 times but its getting corrupted.so plz provide me backup file
U can't install stock firmware with twrp.
It can be flash using odin for pc only
ya.i know that.u mistaken me.i don't want stock rom.i want backup file of rom.just like that when we do full system backup with twrp recovery before installing new custom rom.are u understand my friend.please help me yaar.my phone is off from 2 months so please please help me .i want backup file of system and boot partition using twrp recovery.
if u have then please upload
required twrp recovery backup file which includes system and boot partition. for samsung s3 neo i9300i.
vinayak1910 said:
required twrp recovery backup file which includes system and boot partition. for samsung s3 neo i9300i.
Click to expand...
Click to collapse
Sorry but i don't have that files U have to flash cm or any other custom rom again
but in my phone i wiped my operating system.so there is no os installed.so is it possible for me to flash cm rom?can i install cm rom with clean installation and is that possible then which version have to install?please reply
If you deleted ALL partitions, you have to flash Stock. If not, then just install something.
vinayak1910 said:
but in my phone i wiped my operating system.so there is no os installed.so is it possible for me to flash cm rom?can i install cm rom with clean installation and is that possible then which version have to install?please reply
Click to expand...
Click to collapse
Yes of course you can. Flash whichever version you want. Just make sure it is only for your device s3 neo not any other Samsung phone. If you have solved the problem, then reply here and all moderator to close this thread.
Hit thanks of it helped!
I put lineage 14.1 on my phone today , worked great , then I decided to factory reset the phone , now the phone constantly goes into a recovery boot loop back to TWRP , I am told that the new version of TWRP will fix this , I can find the image version of TWRP but not the .ZIP version....
Please advise how best to update my k3-50 phone to the latest version of twrp , I did try copying across the Twrp image file to my sd card , but twrp does not see the file as a Install file....help please.
Or even a version with the correct scatter file to use with SP tools...please
Doh , I have managed to update to 3.03 using twrp , had to click install image..............BUT my phone still reboots back to twrp every time help please !
Help I have even managed to install 3.1 for twrp , but still my phone is in constant loop back to twrp , I have tried to reinstall roms , it says it has installed correctly , but each time , reboots to twrp..........any way around this , maybe sideload a old rom to remove twrp or something along those lines.....help please...
justwondering said:
Help I have even managed to install 3.1 for twrp , but still my phone is in constant loop back to twrp , I have tried to reinstall roms , it says it has installed correctly , but each time , reboots to twrp..........any way around this , maybe sideload a old rom to remove twrp or something along those lines.....help please...
Click to expand...
Click to collapse
Had the same problem with another ROM some time ago.
The only thing that worked for me:
-Flash Stock-ROM through SPFlashTool
-Flash TWRP through SPFlashTool
-Reboot to TWRP
-Take a nandroid backup
-Wipe and install a new Custom-ROM.
All software you need is in this thread: https://forum.xda-developers.com/k3-note/general/organized-thread-lenovo-k3-note-k50-t3158522
Hi everyone,
I posted this thread in general troubleshooting category and after some advice, I decided to post it in the S4 section.
I was since 3 years on custom ROM (CM and Lineage OS) and due to substratum, I had a bootloop.
My problem is quite particular, after a total clean (wipe and format cache,system,data, dalvik cache) of my device and flashing the stock ROM, custom recovery cause me some trouble.
Whatever I try (CWM touch 6 or TWPR 3.1.1), I can't flash custom ROM (Lineage OS 14.1), TWPR or CWM crash 1 second after the flash command and reboot, with disable touchscreen and even by using old navigation way and try again, same problem.
Tried also to disable file signature check but no effect.
Quick summary about what I did:
- Device: Samsung Galaxy S4 (GT-I9505)
- ROM stock used: I9505XXUHOJ2 ( the build on which is based the CF-Root file I used) and Bulgarian version due to mistake.
- I tried on these two ROM with in the two cases, no patch or Samsung ROM update made.
- Tried to install CWM by ROM Manager and ODIN (v3.09)
- TWPR installed by TWPR App using file in .img and not the second option (tar.img) for LTE Internationnal Qualcomm.
-Checked the root before last attempt with root checker and it was ok.
- Made 4 times already the clean and Stock ROM flash to clean recovery and try another way to install it (never had error after recovery install).
Actually I'm on the OJ2 Rom with update and patch delivered by Samsung with classic method.
In advance thanks for your help and I really hope it's not too serious.
By the way, sorry for my english, it's not my native language
Try flashing the stock ROM from sammobile.com or updato.com, don't root, use Odin 3.07 to flash the tar version of TWRP 2.8.7, try flashing a custom ROM.
Thx for the help/advice
Just to be sure, my stock ROM is actually from up updato.com but due to the patch and Samsung update I'm now on HPK2.
Here the detail of my stock ROM
https://image.noelshack.com/fichiers/2018/05/4/1517503670-screenshot-2018-02-01-17-43-00.png
(the integrated image link option made it as large as the moon so I prefer a simple link)
TWPR 2.8.7 is still efficient or another version would be better ?
If yes, I will try in the hour and I will give you news as soon as possible
EDIT: After some research, TWPR 2.8.7 jfltexx is not avaible in .tar , only .img and impossible to find it on net...
But 2.8.6 and 2.8.4 are avaible in .tar and 3.0.0 in .img.tar , which one is the best ?
I suggested 2.8.7 because Ihave used it in the past and it was very stable. Try a newer tar version. It's really just to see if the phone will take TWRP and boot it.
Whatever I try (TWRP 3.0.0 and 3.0.1 in .img.tar for jlftexx)
Odin (v3.07) do the job , my phone reboot as normal.
But when I shutdown it and lauch in recovery by manual way, got during a micro seconds the android logo of loading and intant "No commands " and I end on the stock recovery.
Edit: I will try the same method with Odin using CWM tar (never had problem with it before this day)
Same thing with CWM-v6.0.4.7-Touch-GT-I9505.tar
Android loading logo and "No command detected"
Problem solved
Well, I don't know how I made a sucess but it seems the "wild" method worked.
So here is the list of things I did in case somepne got the same trouble
Put your Zip file on SD AND Internal Memory (in case)
All the Zip files I used where on my internal storage during this procedure.
- Download mode:
uncheck Auto Reboot in Odin
flash TWRP3.0.1.0 jlftexx.img.tar with ODIN in admin mode
turn off device after flash ended
Obligation or the stock recovery will return automatically !
Lauch device in recovery mode:
If it's TWRP good news, slide to confirm modifications.
Recovery mode:
-Wipe --> Advanced Wipe--> Select Cache, Dalvik Cache, Sytem and Data (never check internal and SD storage)
I tried by mistake without wiping dalvik cache, and got no boot after 5 minutes so i made it again with all the wipe above
-Install --> Flash zip of the rom and Gapps (got an error at zip signature check on the ROM so I flashed after uncheck this option)
-Reboot --> System
Let your device launch on the new rom, set the basic parameters and after, if you want, return in recovery to flash the SU addon for root (got also zip sugnature fail so I ahd to uncheck it again)
Hoping no one will ever had the same problem but in case, I share my solution
Thanks again for help
Guys this is help less.
After rooting my device I followed some instructions to get the Lineage 14. I flashed a BootLoader and a Modem as instructed and went forth to mount USB in order to transfer the custom rom into the device. But this is where the problem is.
It says E: Cant find partition to mount storage. I've tried to reboot, wide, data, storage, system and cache and repair the partition I don't know what else to do.
Anyone else can help? Btw I am fairly new to this stuff so please dumb it down for me.
Another thing, when I go to reboot my recovery it says my device isn't rooted and asks to install superSu, however it was rooted before I entered download mode and started installing bootloader and modem.
Now I have no operating system in the device so i can literally only use Recovery or download mode.
Is my device bricked? I don't know. :crying: :crying:
Pobi123 said:
Guys this is help less.
After rooting my device I followed some instructions to get the Lineage 14. I flashed a BootLoader and a Modem as instructed and went forth to mount USB in order to transfer the custom rom into the device. But this is where the problem is.
It says E: Cant find partition to mount storage. I've tried to reboot, wide, data, storage, system and cache and repair the partition I don't know what else to do.
Anyone else can help? Btw I am fairly new to this stuff so please dumb it down for me.
Another thing, when I go to reboot my recovery it says my device isn't rooted and asks to install superSu, however it was rooted before I entered download mode and started installing bootloader and modem.
Now I have no operating system in the device so i can literally only use Recovery or download mode.
Is my device bricked? I don't know. :crying: :crying:
Click to expand...
Click to collapse
If you can boot recovery, all is not lost.
First, are you sure that you flashed the correct bootloader/modem for your s5 model (G900 T, P, V, F, etc? Odin should not let you flash the wrong one, but anything is possible.
If Bl/modem is correct, them the next thing is to get the custom rom onto the phone.
-make sure you have downloaded everything you need (rom, root method(pref Magisk), gapps if wanted)
- boot into recovery, I'm recommending and assuming that you are using the latest Twrp, if not, d/l official Twrp for your model, and flash that with Odin
-In twrp select wipe, format data, just in case.
-now you should be able to mount usb storage, using the option in twrp
- now you should be able to mount your phone to your PC and transfer the rom, put it somewhere easy to find on the phone. also copy gapps and Magisk zips
-now, still in twrp, select install, select rom zip, select add more, select Magisk zip, also flash gapps at this time if you want to use them.
-click the button to flash
-click wipe cache/dalvik
-click reboot
-pray ?
BlueCyclone said:
If you can boot recovery, all is not lost.
First, are you sure that you flashed the correct bootloader/modem for your s5 model (G900 T, P, V, F, etc? Odin should not let you flash the wrong one, but anything is possible.
If Bl/modem is correct, them the next thing is to get the custom rom onto the phone.
-make sure you have downloaded everything you need (rom, root method(pref Magisk), gapps if wanted)
- boot into recovery, I'm recommending and assuming that you are using the latest Twrp, if not, d/l official Twrp for your model, and flash that with Odin
-In twrp select wipe, format data, just in case.
-now you should be able to mount usb storage, using the option in twrp
- now you should be able to mount your phone to your PC and transfer the rom, put it somewhere easy to find on the phone. also copy gapps and Magisk zips
-now, still in twrp, select install, select rom zip, select add more, select Magisk zip, also flash gapps at this time if you want to use them.
-click the button to flash
-click wipe cache/dalvik
-click reboot
-pray ?
Click to expand...
Click to collapse
Hey man! Thank you so much for your reply. I installed CPE1 bootloader and modem driver, honestly I don't even know what they do. Was this a wrong thing to do?
I rooted my device using cf auto root, then flashed the bootloader and modem using Odin. After that I (stupidly) tried to boot my stock OS and it was stuck in a bootloop.
Unfortunately I won't be able to try your instructions this till tomorrow evening but I'll keep you posted!! do you mind if I pm?
Edit: I was using twrp 2.8.7 I believe, could this have been the problem? Also I updated twrp to latest and tried micro sd as storage and flashed a Rom but the phone is still bootlooping
Pobi123 said:
Hey man! Thank you so much for your reply. I installed CPE1 bootloader and modem driver, honestly I don't even know what they do. Was this a wrong thing to do?
I rooted my device using cf auto root, then flashed the bootloader and modem using Odin. After that I (stupidly) tried to boot my stock OS and it was stuck in a bootloop.
Unfortunately I won't be able to try your instructions this till tomorrow evening but I'll keep you posted!! do you mind if I pm?
Edit: I was using twrp 2.8.7 I believe, could this have been the problem? Also I updated twrp to latest and tried micro sd as storage and flashed a Rom but the phone is still bootlooping
Click to expand...
Click to collapse
Ok I see you have S5 plus. I'm not familiar with that device to know which baseband it should be.
One thing you might try is to boot recovery and clear cache/dalvik and then try booting the custom rom.
If all else fails, you might try Samfirm
https://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647
That should give you a stock firmware file to flash with odin.
You can pm if you need to, I don't own an S5+, nor am I a veteran flasher but I will try to help if I can.
BlueCyclone said:
Ok I see you have S5 plus. I'm not familiar with that device to know which baseband it should be.
One thing you might try is to boot recovery and clear cache/dalvik and then try booting the custom rom.
If all else fails, you might try Samfirm
https://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647
That should give you a stock firmware file to flash with odin.
You can pm if you need to, I don't own an S5+, nor am I a veteran flasher but I will try to help if I can.
Click to expand...
Click to collapse
Ive tried the suggestion you gave me, no success. However I honestly dont know if it could be my fault. I'm gonna flash the stock firmware and restart the whole root process.
Thanks for your help man!
Pobi123 said:
Ive tried the suggestion you gave me, no success. However I honestly dont know if it could be my fault. I'm gonna flash the stock firmware and restart the whole root process.
Thanks for your help man!
Click to expand...
Click to collapse
Ok sorry I couldn't be more help
Oh, you don't need to use of cfautoroot anymore, you can just flash Magisk after the rom, and then use Magisk manager to manage all your root permissions.
So if you are going back to stock, I would:
-Flash stock in Odin
-probably boot stock once to verify (first boot takes long)
-odin flash latest twrp(uncheck auto-reboot, just battery pull after it says pass)
-power on phone with key combo to boot recovery
- format data
-flash rom/gapps?/Magisk
-wipe cache/dalvik
-reboot system (first boot will take long)
Hope you get your phone working again
BlueCyclone said:
Ok sorry I couldn't be more help
Oh, you don't need to use of cfautoroot anymore, you can just flash Magisk after the rom, and then use Magisk manager to manage all your root permissions.
So if you are going back to stock, I would:
-Flash stock in Odin
-probably boot stock once to verify (first boot takes long)
-odin flash latest twrp(uncheck auto-reboot, just battery pull after it says pass)
-power on phone with key combo to boot recovery
- format data
-flash rom/gapps?/Magisk
-wipe cache/dalvik
-reboot system (first boot will take long)
Hope you get your phone working again
Click to expand...
Click to collapse
Good News! Phone is back in full working order after flashing stock firmware. It was kinda scary though, I had to fix an error in Odin and then the phone wouldn't even boot up! Left it over night, booted it again and it worked fine Thanks a lot for your help, I'll try not to soft brick my device again
i recently just installed the floyd oneui rom onto my samsung note 5. after reboot it froze on phone is activating . can someone please tell me what i may have done wrong or if my phone is bricked ?
i unlocked the bootloader and flashed the twrp recovery onto the device using the lastest version of odin. i had the floyd file saved on the phone , did a wipe with twrp and installed the floyd file and after selecting only
items i was going to use went to reboot and now it's froze on phone is activating screen . i can still go back and do a full wipe with twrp recovery but is there anything else i can do or is the phone bricked
Are you using the latest version of twrp if not install it and try again after a full wipe. Also before anything backup your efs