hello good night, good afternoon, good morning everyone here !,
recently bought a mi 9t eea with miui 12.0.3, follow the instructions provided by re4son on this link (https://forums.kali.org/showthread.php?48755-Xiaomi-Redmi-k20-MI-9t-Hid -interface & p = 94518 # post94518), apparently the installation worked perfectly, I connected my tplink 722n v1 atheros and it was detected more after giving the command airmon-ng start wlan2 was successful!, following the command airodump-ng wlan2mon was more than which resulted in an error, then the same airmon-ng start wlan2 command started to result in an error! , restarted the device, again the command airmon-ng board detected following command airmon-ng start wlan2 error and more error, tested in miui 11.0.4,11.0.5,11.0.6 and nothing to work on the external board.
information:
miui 12.0.3
magisk v24
Universal DM-Verity, ForceEncrypt 4/3/2020
nethunte filed 2020.3, 2020.4, I haven't tested version 2020.2 because it is no longer available if someone has the link to that version send me!
I need a solution, to work the external wi-fi adapter.
hello I'm having the same problem a little bit like yours, in my case I was able to detect more does not put the external card in monitor mode, I'm also looking for links from kali nethunter 2020.2.
Related
Hi all,
I have recently installed kali linux on my android phone by mounting an .img file and using Vx connectbot to work through the terminal..
As for the monitor mode, I typed(as superuser):
# airmon-ng
The chipset column says: [Not PCI, not USB or sdio]
May be this is the reason I am unable to enter monitor mode.... Is there a way for the emulator to detect the wireless card??
I also tried installing apps like bcmon (which didnt work because of not being one of Broadcom chipsets) and few others..
Please find way to enable monitor mode... thanks in advance
Am using Yu Yureka... lollipop 5.1.1
hey for your information yu yureka has an qualcom wifi chipset,and that does not support monitor mode as of now sorry..hope I helped supported ones are bcm4329 and bcm4330
This is not my work
the original developer is mzo
I want to share Kali nethunter for kenzo to use it nougat roms
This is an unofficial port of Kali NetHunter for Xiaomi Redmi Note 3.
Official site of kali https://www.kali.org/
A project by Offensive Security
The Kali Linux NetHunter project is the first Open Source Android penetration testing platform, created as a joint effort between the Kali community member “BinkyBear” and Offensive Security. NetHunter supports Wireless 802.11 frame injection, one-click MANA Evil Access Point setups, HID keyboard (Teensy like attacks), as well as BadUSB MITM attacks – and is built upon the sturdy shoulders of the Kali Linux distribution and toolsets.
802.11 Wireless Injection and AP mode support with multiple supported USB wifi cards.
Capable of running USB HID Keyboard attacks, much like the Teensy device is able to do.
Supports BadUSB MITM attacks. Plug in your Nethunter to a victim PC, and have your traffic relayed though it.
Contains a full Kali Linux toolset, with many tools available via a simple menu system.
USB Y-cable support in the Nethunter kernel – use your OTG cable while still charging your Nexus device!
Software Defined Radio support. Use Kali Nethunter with your HackRF to explore the wireless radio space.
Documentation and Attack Descriptions
Attack descriptions as well as some documentation to get you started with the installation and setup of Kali NetHunter can be found at https://github.com/offensive-securit...nethunter/wiki
-Downloads :
-[Kalifs full]: https://www.androidfilehost.com/?fid=745425885120724463
Mirror
https://drive.google.com/file/d/0BzM1YuO3yLiQaGhNRTRwLVVueEk/view?usp=drivesdk
-Instructions :
Flash nethunter-kenzo-marshmallow-kalifs-full.
(Kernel patch included in zip)
this is only for nougat based roms so flash on lineage is based roms
I installed on nitrogen is works good
Reboot
if go in bootloop it is completely normal, wait a few minutes
[email protected] said:
This is not my work
the original developer is mzo
I want to share Kali nethunter for kenzo to use it nougat roms
This is an unofficial port of Kali NetHunter for Xiaomi Redmi Note 3.
Official site of kali https://www.kali.org/
A project by Offensive Security
The Kali Linux NetHunter project is the first Open Source Android penetration testing platform, created as a joint effort between the Kali community member “BinkyBear” and Offensive Security. NetHunter supports Wireless 802.11 frame injection, one-click MANA Evil Access Point setups, HID keyboard (Teensy like attacks), as well as BadUSB MITM attacks – and is built upon the sturdy shoulders of the Kali Linux distribution and toolsets.
802.11 Wireless Injection and AP mode support with multiple supported USB wifi cards.
Capable of running USB HID Keyboard attacks, much like the Teensy device is able to do.
Supports BadUSB MITM attacks. Plug in your Nethunter to a victim PC, and have your traffic relayed though it.
Contains a full Kali Linux toolset, with many tools available via a simple menu system.
USB Y-cable support in the Nethunter kernel – use your OTG cable while still charging your Nexus device!
Software Defined Radio support. Use Kali Nethunter with your HackRF to explore the wireless radio space.
Documentation and Attack Descriptions
Attack descriptions as well as some documentation to get you started with the installation and setup of Kali NetHunter can be found at https://github.com/offensive-securit...nethunter/wiki
-Downloads :
-[Kalifs full]: https://www.androidfilehost.com/?fid=745425885120724463
-Instructions :
Flash nethunter-kenzo-marshmallow-kalifs-full.
(Kernel patch included in zip)
this is only for nougat based roms so flash on lineage is based roms
I installed on nitrogen is works good
Reboot
if go in bootloop it is completely normal, wait a few minutes
Click to expand...
Click to collapse
Can I flash this .zip on omnirom? Is it full working without any issue?
overcustom said:
Can I flash this .zip on omnirom? Is it full working without any issue?
Click to expand...
Click to collapse
Yes but take nandroid backup just in case
Can I flash custom kernels on Nethunter???
Or flash magisk instead of SuperSU that is preinstaled.
Sent from my Redmi Note 3 using XDA Labs
AliGulzar-AF said:
Can I flash custom kernels on Nethunter???
Or flash magisk instead of SuperSU that is preinstaled.
Sent from my Redmi Note 3 using XDA Labs
Click to expand...
Click to collapse
I have tried it works but you will need to complete. It's first boot then open net Hunter. App all good then go to SuperSU click on full unroot then go to recovery forcefully then flash magisk then kernel which you want
Then reboot but I am getting. Cts profile mismatch
Here is video
https://youtu.be/5cAOhdsQuzg
terminal force closing on lineage and xenondhd... any suggestions?
srijansaxena11 said:
terminal force closing on lineage and xenondhd... any suggestions?
Click to expand...
Click to collapse
Not getting FCS check video
srijansaxena11 said:
terminal force closing on lineage and xenondhd... any suggestions?
Click to expand...
Click to collapse
Try uninstalling terminal app and install this one
https://drive.google.com/file/d/0BzM1YuO3yLiQZEJJRXc5aTVGckk/view?usp=drivesdk
please help me, why my fingerprint not work. before flash it, everything was fine..i'm using nitrogen os
BUG
external wifi cards are not working (tp link tl wn722n) , hid are not fully working (duckhunter in particular) ,also got into root problem , if anybody want to try NH use unrooted nirtogen os .very happy with volt feature and many new feature are added
thanks in advance
tongo45 said:
please help me, why my fingerprint not work. before flash it, everything was fine..i'm using nitrogen os
Click to expand...
Click to collapse
Are you goodix fingerprint user
???
abhinavornikkoo said:
external wifi cards are not working (tp link tl wn722n) , hid are not fully working (duckhunter in particular) ,also got into root problem , if anybody want to try NH use unrooted nirtogen os .very happy with volt feature and many new feature are added
thanks in advance
Click to expand...
Click to collapse
First turn off your internal wifif card then restart then after reboot connect to external wifi to mobile then go to wifi settings just turn on wifi your external wifi card will be used
[email protected] said:
Are you goodix fingerprint user
???
First turn off your internal wifif card then restart then after reboot connect to external wifi to mobile then go to wifi settings just turn on wifi your external wifi card will be used
Click to expand...
Click to collapse
Yes,i think. How to see goodix or fpc fingerprint ?
[email protected] said:
I have tried it works but you will need to complete. It's first boot then open net Hunter. App all good then go to SuperSU click on full unroot then go to recovery forcefully then flash magisk then kernel which you want
Then reboot but I am getting. Cts profile mismatch
Here is video
https://youtu.be/5cAOhdsQuzg
Click to expand...
Click to collapse
Cts profile mismatch as you have not enabled magisk hide hi to settings ands enable magisk hide
[email protected] said:
Are you goodix fingerprint user
???
First turn off your internal wifif card then restart then after reboot connect to external wifi to mobile then go to wifi settings just turn on wifi your external wifi card will be used
Click to expand...
Click to collapse
Ohh ic,,so thats how to turn on external wifi..
Cz i was tried this NH b4 n cant detect my external wifi
Gotta try flash this again on my Nitrogen os..hope it work..
Will give report on this l8r..btw nice work
replay
[email protected] said:
Are you goodix fingerprint user
???
First turn off your internal wifif card then restart then after reboot connect to external wifi to mobile then go to wifi settings just turn on wifi your external wifi card will be used
Click to expand...
Click to collapse
still not working ! i have tried , every thing looks good except external wifi card problem, hope u can help us with patch,
will it work on ressurection remix ??
and if it will plz tell me about the bugs and installation procedure !
Thank you
Hey can some tell me how to install fluxion on NH,
I have tied by terminal as well as on vnc server , when I type ./Installer.sh then it gives bash ./installer.sh permission denied then I tied chmod +x .. Plz plz help me
Still not working for external wifi card,i'm using wn722n too
Can that file worked redmi note 4?
[email protected] said:
Are you goodix fingerprint user
???
First turn off your internal wifif card then restart then after reboot connect to external wifi to mobile then go to wifi settings just turn on wifi your external wifi card will be used
Click to expand...
Click to collapse
I was trying this n still doesnt work for me..im assuming this is kernel problem..no kernel support nethunter so no external wifi detected..
So far i only known there is one rom working for nethunter..thats cm 13 with builth in nethunter kernel..but wifite doesnt work..
I hope there some1 can make nethunter kernel fully working for ours device
First time posting, but I've read through dozens of threads and have used the site extensively. I cannot seem to find an answer to the issue I'm having. I had an old Galaxy Note 4 lying around and wanted to see if I could install NetHunter. After tons of trial and error, I was successful in flashing LineageOS 15.1, addonsu -15.1 arm, nethunter-generic-armhf-kalifs-full-rolling-2017.10-20171013-0449, and kernel-nethunter-generic-armhf-3.15.4-20170211-0304 (too new to post link of the NH builds). I have full chroot, updated busybox (v1.25-0-NetHunter) and SuperuserSU to manage root privileges. I had to install all of the tools (e.g., cspolit, DriveDroid, OpenVPN, etc.) individually, but they seem to be in working order.
My issue: I bought an external wifi adapter (Alfa AWUS036NEH) with a chipset (Ralink Technology Wifi Adapter RT2780) that supports monitor mode. The Wifi card appears to work flawlessly on my macbook with Kali distro, but I can't seem to find a way for the NH kernel on the Note 4 to recognize the adapter. In the kernel I flashed, I can see the rt2870.bin firmware required in the /system/etc/firmware folder, but for some reason Nethunter does not recognize the adapter. On most Nexus/NH builds, the wifi adapter is found to be compatible and is usually plug and play.
When I run:
-Kali terminal
-ifconfig
There is no wlan1. Only wlan0.
Same thing if I run iwconfig.
When I run:
-kali terminal
-airmon-ng
I receive a prompt that states:
Found phy0 with no interface assigned, would you like to assign one to it [y/n]?
-y
ERROR adding monitor mode interface: command failed: Operation not supported (-95)
No surprise, the above is indicating the embedded chipset does not support a monitor mode interface, but it doesn't even list the external adapter.
when I run: lsusb
Output shows the Ralink wifi adapter on bus 3:2.
I understand NetHunter was not built for LineageOS 15.1, but there has to be some way to maybe push the firmware or modify the firmware (I have the original firmware from the manufacture) to be compatible with my current build? Do I need to compile my own Kernel for this to work properly? Why doesn't the generic NH kernel, with the rt2870.bin file work?
Thanks ahead of time.
Have you tried using Magisk and flashing the Kali Nethunter module with that? It also includes multiple wireless firmware and I believe the correct one for your Alfa dongle. I too just bought that exact WIFI dongle and I'm still in the process of setting up Kali on my Note 4.
I had a similar issue as you on my OnePlus 5T even with the Magisk module for Nethunter. I'm going to try and find a different kernel because I think that's my issue on that phone.
My Note 4 is N910P but I'll let you know if I find something that works and maybe it'll help you find a way on your variant.
Hello Everyone!
I saw on the website of offensive security that they are released The official NetHunter For Mi 9T my question
Does the Internal wifi support packet injection and monitor mode (without external USB adapter)
Thanks Again I really need help guys.....
deigo775 said:
Hello Everyone!
I saw on the website of offensive security that they are released The official NetHunter For Mi 9T my question
Does the Internal wifi support packet injection and monitor mode (without external USB adapter)
Thanks Again I really need help guys.....
Click to expand...
Click to collapse
-There is a thread about Kali NH for Mi 9T, probably in Guides section or so
-If they didn't release a new, that "official" Kali was released long ago and I tested it with MIUI 11 (not sure would the same "add-on" package work correctly with MIUI 12)
- Monitoring WiFi works but Packet Injection does not work, you can find more info how/why in that thread
- Later I also installed Kali NH manually (how-to was described also in that thread) to MIUI 12 (still A10) and got the same: Monitoring working, Injection not
In short - you can install Kali NH to Mi 9T and WiFi monitoring will work out of the box (because NH recognizes Snapdragon and uses special command to put to the Monitor mode) but Packet Injection will not work (the most I found about was that it would require a special kernel)
zgfg said:
-There is a thread about Kali NH for Mi 9T, probably in Guides section or so
-If they didn't release a new, that "official" Kali was released long ago and I tested it with MIUI 11 (not sure would that package work correctly with MIUI 12)
- Monitoring WiFi works but Packet Injection does not work, you can find more info how/why in that thread
- Later I also installed Kali NH manually (how-to was also described in that thread) to MIUI 12 (still A10) and got the same: Monitoring working, Injection not
In short - you can install Kali NH to Mi 9T and WiFi monitoring will work out of the box (because NH recognizes Snapdragon and uses special command to put to the Monitor mode) but Pcket Injection will not work (the most I found about was that it would require a special kernel)
Click to expand...
Click to collapse
Thanks for the useful information
So the Airodump-ng works?
Can i connect the external adapter To the device ? And use it For packet injection You know ( using it as the wifi) And Thanks again
deigo775 said:
Thanks for the useful information
So the Airodump-ng works?
Can i connect the external adapter To the device ? And use it For packet injection You know ( using it as the wifi) And Thanks again
Click to expand...
Click to collapse
Didn't have/try external WiFi adapter but that should work (in that case both Monitoring and Injection must work over the adapter, no more the Snapdragon)
I was even able to break my own WiFi but instead of Packet Injection (to disconnect and initiate new reconnection on the second phone) I had to manually start connecting to my WiFi my second phone while Mi 9T was in monitoring mode - then it caught up and broke the pass
zgfg said:
Didn't have/try external WiFi adapter but that should work (in that case both Monitoring and Injection must work over the adapter, no more the Snapdragon)
I was even able to break my own WiFi but instead of Packet Injection (to disconnect and initiate new reconnection on the second phone) I had to manually start connecting to my WiFi my second phone while Mi 9T was in monitoring mode - then it caught up and broke the pass
Click to expand...
Click to collapse
Sorry for bothering Can U give a full guide on how to install official NetHunter on MI9T
deigo775 said:
Sorry for bothering Can U give a full guide on how to install official NetHunter on MI9T
Click to expand...
Click to collapse
Its been months I had uninstalled Kali NH (and later reformatted and switched to different firmwares), hence cannot support you but read another Q/A thread for Kali on Mi 9T, particularly the posts #21,23,27,32 - all steps were documented there (post #27):
https://forum.xda-developers.com/showpost.php?p=83160165&postcount=21
https://forum.xda-developers.com/showpost.php?p=83226095&postcount=23
https://forum.xda-developers.com/showpost.php?p=83271769&postcount=27
zgfg said:
Its been months I had uninstalled Kali NH (and later reformatted and switched to different firmwares), hence cannot support you but read another Q/A thread for Kali on Mi 9T, particularly the posts #21,23,27,32 - all steps were documented there (post #27):
https://forum.xda-developers.com/showpost.php?p=83160165&postcount=21
https://forum.xda-developers.com/showpost.php?p=83226095&postcount=23
https://forum.xda-developers.com/showpost.php?p=83271769&postcount=27
Click to expand...
Click to collapse
I can't Find A Word To Thank You You Really Helped Me a lot Thanks Mate Hope You Get Wonderful Day
My last question is i successfully installed the Net hunter and enabled The Monitor mode On wlan0 Using echo mode (Wifite and airodump-ng ) Are Working But Reaver and Wash having Trouble When Run the reaver and wash I got (found Bad packet with Bad fcs ignoring..) i try to run wash -i wlan0 -F but not detecting the Netwoks
deigo775 said:
I can't Find A Word To Thank You You Really Helped Me a lot Thanks Mate Hope You Get Wonderful Day
My last question is i successfully installed the Net hunter and enabled The Monitor mode On wlan0 Using echo mode (Wifite and airodump-ng ) Are Working But Reaver and Wash having Trouble When Run the reaver and wash I got (found Bad packet with Bad fcs ignoring..) i try to run wash -i wlan0 -F but not detecting the Netwoks
Click to expand...
Click to collapse
I'm glad that it worked to you. I spent in the summer a day or two on setting it up and documenting, good if it can help to others (there were couple of issues with chroot and sudo where I wasted a time to find the proper way to install)
I don't remember such details anymore - you can check in that theead my posts and screenshots if I reported (if I would have an issue bothering me, I would usually report/ask there)
Not sure anymore, maybe one method did not work and attacking always skipped over to the next method
Btw, are you using a stick or a built-in Qualcomm WiFi chipset, also, what was your firmware or custom Rom?
And does Packet injection work for you - i.e. can you jump from monitoring mode to cracking mode without the need to manually reconnect WiFi on the other phone/laptop (to capture its handshaking eith the WLAN AP)?
zgfg said:
I'm glad that it worked to you. I spent in the summer a day or two on setting it up and documenting, good if it can help to others (there were couple of issues with chroot and sudo where I wasted a time to find the proper way to install)
I don't remember such details anymore - you can check in that theead my posts and screenshots if I reported (if I would have an issue bothering me, I would usually report/ask there)
Not sure anymore, maybe one method did not work and attacking always skipped over to the next method
Btw, are you using a stick or a built-in Qualcomm WiFi chipset, also, what was your firmware or custom Rom?
And does Packet injection work for you - i.e. can you jump from monitoring mode to cracking mode without the need to manually reconnect WiFi on the other phone/laptop (to capture its handshaking eith the WLAN AP)?
Click to expand...
Click to collapse
Thanks Buddy Iam First Iam Using Miui Global Rom 11.0.5 Than flash the official NetHunter from their website Using The Method U send me in previous Post let's Talk about injection packet and monitor mode on external Adapter My Chipset is (RT2800 (Ralink Rt3070)) everything works with it successfully...
Now let's Talk about The built-in wifi i set up monitor mode by (echo "4" > /sys/module/wlan/parameters/con_mode) So The Wlan0 welll become in monitor mode (Now set (Wifte -i wlan0) u can see the Netwoks how ever The Reaver and wash Cant work it shows error
The injection mode don't work
deigo775 said:
Thanks Buddy Iam First Iam Using Miui Global Rom 11.0.5 Than flash the official NetHunter from their website Using The Method U send me in previous Post let's Talk about injection packet and monitor mode on external Adapter My Chipset is (RT2800 (Ralink Rt3070)) everything works with it successfully...
Now let's Talk about The built-in wifi i set up monitor mode by (echo "4" > /sys/module/wlan/parameters/con_mode) So The Wlan0 welll become in monitor mode (Now set (Wifte -i wlan0) u can see the Netwoks how ever The Reaver and wash Cant work it shows error
The injection mode don't work
Click to expand...
Click to collapse
Oh, you are still on MIUI 11 - you're probably saving your battery or what ?
For MIUI 11 you could have also flashed their official pre-built image for Mi 9T (I had it when I was on 11.0.3 EEA - easier installation, same nett results)
Btw, if injection does not work with your adapter, you could have the same with 9T alone (monitoring ok, injection nok)
At the end I was dissapointed (and I uninstalled, and didn't install again when I moved to Xiaomi.eu firmware) since to break my own WPA-PSK i had:
- to manually initiate WLAN reconnection on the other phone to capture its handshake (because of lacking the Injection) to enter to the cracking mode
- to put my (kn)own PSK for the WLAN under attack to the Kali's Dictionary (maybe because a more sofisticated method did not work and this was the only way to make the brute-force method to succeed cracking)
All together not useful for any real-case cracking (although I didn't want to use it for real cracking, I tested only with my WLANs at home, friends and family)
And all that for the price of about 9 GB on /data
Hey guys here a howto Install Kali Linux Nethunter on S4 Mini Or Any Device
if works to when anybody have not much space on phone
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war. Please
* do some research if you have any concerns about anything
* before flashing it
perhaps that helps some people
0. install busybox 1.25 (few are not working , then you must take another app from playstore)
1. Build Kernel
2. Flash arm64 or armhf / or your release zip https://www.kali.org/get-kali/#kali-mobile
3 install apk nethunter: https://github.com/atarii/Magisk_Kali_Nethunter/tree/master/files
4. install all needed files like terminal etc
5. kalifs-armhf-nano.tar.xz use from inside the nethunter-2022.2b-generic-armhf-kalifs-nano.zip or youre release .zip
6. put kalifs-armhf-nano.tar.xz to /sdcard/ & /extern/sdcard and rename to kalifs-backup.tar.xz
7. open nethunter - chroot install , choose the right location for folder , and click on minimal and choose sdcard is root
8. install needs ca 5 minutes
9. chroot installed
10. apt-get update && upgrade via terminal , and install all needed tools or choose a bigger install , because wifite will only work with few more installed tools , the commands are not working without update & upgrade
11. Flash builded kali nethunter kernel
11 1/2 finished installed the extern wifi cards under this line should work without any need of [MODULE] Wireless Firmware for Nethunter , i can test it at 8 aug then arrive my wifit adapter RTL8192EU
but currently i cant building a kernel and try to install manually the wifi driver , but currently without success
Attention: The Extern Wifi Adapter must before you start the phone are plugged in
12 .The following chipsets are supported by default in most, if not all, NetHunter kernels:
Atheros
ATH9K_HTC (AR9271, AR7010)
ATH10K
Ralink
RT73
RT2800USB
RT3070
Realtek
RTL8188EUS
RTL8188CU
RTL8188RU
RTL8192CU
RTL8192EUhttps://www.ebay.de/itm/373611298529 / Driver is only for install without nethunter kernel because nethunter kernel had it inside / Driver: https://github.com/Mange/rtl8192eu-linux-driver
RTL8723AU
RTL8811AU
RTL8812AU
RTL8814AU
RTL8821AU
RTW88-USB
MediaTek
MT7610U
MT7612U
Qualcomm internal wifi chipsets (wlan0)
QCACLD-2.0
QCACLD-3.0
The following devices are confirmed to be working with a NetHunter build:
TP-Link TL-WN722N v1 (Please note that v2 & v3 have unsupported chipsets) but v2 and v3 may be supported using RTL8812AU drivers.)
TP-Link TL-WN822N v1 - v4
Alfa Networks AWUS036ACH
Alfa Networks AWUS036NEH (recommended by @jcadduono)
Alfa Networks AWUS036NHA
Alfa Networks AWUSO36NH
Panda PAU05 Nano
Edit:1
Small Tipp
Kali
Adapter: Archer T2U Nano | Driver
STEP 1 : Open Terminal Emulator
STEP 2 : Run commands
sudo apt update
sudo apt install realtek-rtl88xxau-dkms
STEP 3 (Optional): Check driver existance
Run commands below:
find /lib/modules/`uname -r`/ -name "88XXau.ko"
There should be a file in search result if driver was successfully installed.
Created 2022-07-29
Last Updated 2022-07-29