Hello Everyone!
I saw on the website of offensive security that they are released The official NetHunter For Mi 9T my question
Does the Internal wifi support packet injection and monitor mode (without external USB adapter)
Thanks Again I really need help guys.....
deigo775 said:
Hello Everyone!
I saw on the website of offensive security that they are released The official NetHunter For Mi 9T my question
Does the Internal wifi support packet injection and monitor mode (without external USB adapter)
Thanks Again I really need help guys.....
Click to expand...
Click to collapse
-There is a thread about Kali NH for Mi 9T, probably in Guides section or so
-If they didn't release a new, that "official" Kali was released long ago and I tested it with MIUI 11 (not sure would the same "add-on" package work correctly with MIUI 12)
- Monitoring WiFi works but Packet Injection does not work, you can find more info how/why in that thread
- Later I also installed Kali NH manually (how-to was described also in that thread) to MIUI 12 (still A10) and got the same: Monitoring working, Injection not
In short - you can install Kali NH to Mi 9T and WiFi monitoring will work out of the box (because NH recognizes Snapdragon and uses special command to put to the Monitor mode) but Packet Injection will not work (the most I found about was that it would require a special kernel)
zgfg said:
-There is a thread about Kali NH for Mi 9T, probably in Guides section or so
-If they didn't release a new, that "official" Kali was released long ago and I tested it with MIUI 11 (not sure would that package work correctly with MIUI 12)
- Monitoring WiFi works but Packet Injection does not work, you can find more info how/why in that thread
- Later I also installed Kali NH manually (how-to was also described in that thread) to MIUI 12 (still A10) and got the same: Monitoring working, Injection not
In short - you can install Kali NH to Mi 9T and WiFi monitoring will work out of the box (because NH recognizes Snapdragon and uses special command to put to the Monitor mode) but Pcket Injection will not work (the most I found about was that it would require a special kernel)
Click to expand...
Click to collapse
Thanks for the useful information
So the Airodump-ng works?
Can i connect the external adapter To the device ? And use it For packet injection You know ( using it as the wifi) And Thanks again
deigo775 said:
Thanks for the useful information
So the Airodump-ng works?
Can i connect the external adapter To the device ? And use it For packet injection You know ( using it as the wifi) And Thanks again
Click to expand...
Click to collapse
Didn't have/try external WiFi adapter but that should work (in that case both Monitoring and Injection must work over the adapter, no more the Snapdragon)
I was even able to break my own WiFi but instead of Packet Injection (to disconnect and initiate new reconnection on the second phone) I had to manually start connecting to my WiFi my second phone while Mi 9T was in monitoring mode - then it caught up and broke the pass
zgfg said:
Didn't have/try external WiFi adapter but that should work (in that case both Monitoring and Injection must work over the adapter, no more the Snapdragon)
I was even able to break my own WiFi but instead of Packet Injection (to disconnect and initiate new reconnection on the second phone) I had to manually start connecting to my WiFi my second phone while Mi 9T was in monitoring mode - then it caught up and broke the pass
Click to expand...
Click to collapse
Sorry for bothering Can U give a full guide on how to install official NetHunter on MI9T
deigo775 said:
Sorry for bothering Can U give a full guide on how to install official NetHunter on MI9T
Click to expand...
Click to collapse
Its been months I had uninstalled Kali NH (and later reformatted and switched to different firmwares), hence cannot support you but read another Q/A thread for Kali on Mi 9T, particularly the posts #21,23,27,32 - all steps were documented there (post #27):
https://forum.xda-developers.com/showpost.php?p=83160165&postcount=21
https://forum.xda-developers.com/showpost.php?p=83226095&postcount=23
https://forum.xda-developers.com/showpost.php?p=83271769&postcount=27
zgfg said:
Its been months I had uninstalled Kali NH (and later reformatted and switched to different firmwares), hence cannot support you but read another Q/A thread for Kali on Mi 9T, particularly the posts #21,23,27,32 - all steps were documented there (post #27):
https://forum.xda-developers.com/showpost.php?p=83160165&postcount=21
https://forum.xda-developers.com/showpost.php?p=83226095&postcount=23
https://forum.xda-developers.com/showpost.php?p=83271769&postcount=27
Click to expand...
Click to collapse
I can't Find A Word To Thank You You Really Helped Me a lot Thanks Mate Hope You Get Wonderful Day
My last question is i successfully installed the Net hunter and enabled The Monitor mode On wlan0 Using echo mode (Wifite and airodump-ng ) Are Working But Reaver and Wash having Trouble When Run the reaver and wash I got (found Bad packet with Bad fcs ignoring..) i try to run wash -i wlan0 -F but not detecting the Netwoks
deigo775 said:
I can't Find A Word To Thank You You Really Helped Me a lot Thanks Mate Hope You Get Wonderful Day
My last question is i successfully installed the Net hunter and enabled The Monitor mode On wlan0 Using echo mode (Wifite and airodump-ng ) Are Working But Reaver and Wash having Trouble When Run the reaver and wash I got (found Bad packet with Bad fcs ignoring..) i try to run wash -i wlan0 -F but not detecting the Netwoks
Click to expand...
Click to collapse
I'm glad that it worked to you. I spent in the summer a day or two on setting it up and documenting, good if it can help to others (there were couple of issues with chroot and sudo where I wasted a time to find the proper way to install)
I don't remember such details anymore - you can check in that theead my posts and screenshots if I reported (if I would have an issue bothering me, I would usually report/ask there)
Not sure anymore, maybe one method did not work and attacking always skipped over to the next method
Btw, are you using a stick or a built-in Qualcomm WiFi chipset, also, what was your firmware or custom Rom?
And does Packet injection work for you - i.e. can you jump from monitoring mode to cracking mode without the need to manually reconnect WiFi on the other phone/laptop (to capture its handshaking eith the WLAN AP)?
zgfg said:
I'm glad that it worked to you. I spent in the summer a day or two on setting it up and documenting, good if it can help to others (there were couple of issues with chroot and sudo where I wasted a time to find the proper way to install)
I don't remember such details anymore - you can check in that theead my posts and screenshots if I reported (if I would have an issue bothering me, I would usually report/ask there)
Not sure anymore, maybe one method did not work and attacking always skipped over to the next method
Btw, are you using a stick or a built-in Qualcomm WiFi chipset, also, what was your firmware or custom Rom?
And does Packet injection work for you - i.e. can you jump from monitoring mode to cracking mode without the need to manually reconnect WiFi on the other phone/laptop (to capture its handshaking eith the WLAN AP)?
Click to expand...
Click to collapse
Thanks Buddy Iam First Iam Using Miui Global Rom 11.0.5 Than flash the official NetHunter from their website Using The Method U send me in previous Post let's Talk about injection packet and monitor mode on external Adapter My Chipset is (RT2800 (Ralink Rt3070)) everything works with it successfully...
Now let's Talk about The built-in wifi i set up monitor mode by (echo "4" > /sys/module/wlan/parameters/con_mode) So The Wlan0 welll become in monitor mode (Now set (Wifte -i wlan0) u can see the Netwoks how ever The Reaver and wash Cant work it shows error
The injection mode don't work
deigo775 said:
Thanks Buddy Iam First Iam Using Miui Global Rom 11.0.5 Than flash the official NetHunter from their website Using The Method U send me in previous Post let's Talk about injection packet and monitor mode on external Adapter My Chipset is (RT2800 (Ralink Rt3070)) everything works with it successfully...
Now let's Talk about The built-in wifi i set up monitor mode by (echo "4" > /sys/module/wlan/parameters/con_mode) So The Wlan0 welll become in monitor mode (Now set (Wifte -i wlan0) u can see the Netwoks how ever The Reaver and wash Cant work it shows error
The injection mode don't work
Click to expand...
Click to collapse
Oh, you are still on MIUI 11 - you're probably saving your battery or what ?
For MIUI 11 you could have also flashed their official pre-built image for Mi 9T (I had it when I was on 11.0.3 EEA - easier installation, same nett results)
Btw, if injection does not work with your adapter, you could have the same with 9T alone (monitoring ok, injection nok)
At the end I was dissapointed (and I uninstalled, and didn't install again when I moved to Xiaomi.eu firmware) since to break my own WPA-PSK i had:
- to manually initiate WLAN reconnection on the other phone to capture its handshake (because of lacking the Injection) to enter to the cracking mode
- to put my (kn)own PSK for the WLAN under attack to the Kali's Dictionary (maybe because a more sofisticated method did not work and this was the only way to make the brute-force method to succeed cracking)
All together not useful for any real-case cracking (although I didn't want to use it for real cracking, I tested only with my WLANs at home, friends and family)
And all that for the price of about 9 GB on /data
Related
Hello,
(First sorry for my very bad english. It's not my natural language but I do my best for sharing with you!)
04/13 - UPDATE: Now 3G works for ICS with some ROMs like Megatron.
Revolver will be based on TF101G ICS ROM soon.
09/17 - UPDATE:Roach2010 and gnufabio have developped an apk that enable Mobile Network settings (for 3G dongle).
Their APK change the bootloader. (Read more and download)
So maybe this thread has no purpose except for issues and for the list of compatible dongles. If you have a dongle which work and which is not in the list.....
11/08 - UPDATE: 3G dongle works too with Extension-Kit/TFUSB1 Asus P/N 90-XB2UOKEX00020
You can find it here: http://shop.asus.fr/shop/fr/fr-FR/Home/1-Produits/1500-Collection-ASUS/1936-Accessoires-Eee-Pad/1937-Accessoires-Transformer-Prime-TF201/90-XB2UOKEX00070-Adaptateur-USB-externe-pour-ASUS-Eee-Pad.aspx (Thanks to ValenteL for information)
************************************************************
Bellow you can find the first post
Thank you,
Regards.
FIRST POST:
There is probably other ways to make the 3G Dongle working on TF101 but here you can find how we have done.
The follow lines work to have Prime v1.5 installed on your Transformer (works with any version!)
Then you could upgrade to Revolver 2.1.
Otherwise you can directly nvflash your TF101 with the Revolver 2.5 NVFlashed version of cuckoopt.
You just have to follow instructions on this post.
Don't forget to thank him if it works for you
Note: SetCpu doesn't seem to work. I don't know if the issue is coming from Revolver or HC. By re-installing SetCpu, it works one time then crashes.
A. Prime V1.5 Installation:
1. You have to backup all your data/apk from your Internal SD Card because we will make a clean install. So use your backup software.
Becareful. if you project to use Titanium Backup, his backup files are on the internal SD Card so afterwards, you have to move it to your MicroSD (from /mnt/sdcard/Titatium Backup to /data/Removable/MicroSD)
2. Download NVFlash: http://www.filefactory.com/file/ccda97c/n/nvflash.zip then the NVFlash version of Prime v1.5: http://www.sdx-downloads.com/devs/roach2010/flash_roms/prime_v1.5_nvflash.tar.bz2
Updated note: I am not able to activate the Mobile Network option with version 1.6 (even Zip version for ClockWorkMod nor NVFlash version).
But some people have succesfully activated it by flashing NetFinder 1.5 just after the fresh Install of Prime v1.6 and before rebooting the system ; it means in the same CWM
3. unpack NVFlash and Prime v1.5 in the same directory. The image files of Prime v1.5 should be unpacked into the NVFLashTF folder.
4. Connect your TF101 to your PC via USB. Then hold the volume UP and Power button until a NEW device named "APX" appears in the Device Manager. Note that the screen of the Transformer stays black.
5. Click on the APX to install drivers from directory USBPCDriver (included in NVFlash.zip)
info: I used Windows XP 32 bits.
6. Then run Download.bat if you are on Windows, download.sh for Linux users
7. When NVFlash is ended, reboot your TF101.
During boot, there is a setup wizard. Choose connection with "3G and Wifi", not "only Wifi"!!
At this step, you must have the Mobile Network option in Parameters.
8. Download Maxh2003 Script: http://android.modaco.com/index.php?act=attach&type=post&id=73836 (you need to be a register user on Modaco You could find another link some posts after!)
Download the Patch files for ACER A500 tab: http://forum.xda-developers.com/attachment.php?attachmentid=638588&d=1309189189
9. Unzip the script and the Patch file in the same directory.
If you want to upgrade to Revolver 2.1 version (HoneyComb 3.2), you must stop here and go to step B (chapter B).
Otherwise continue chapter A.
10. Connect your TF101 and run install-TF101.bat
11. Mobile Network option is here.
B. REVOLVER 2.1 Installation
1. Do a fresh install of Prime v1.5 NVFlsh version.
If it's not the case go back to the begin of this post and execute steps A.1 to A.9. then go back to B.2
2. Download this file
3. If you read this, Prime v1.5 NVFlash version is installed and you are in CWM Recovery screen.
Install the Recovery 2.1 version (Full). DON'T WIPE DATA
4. At the end, just reboot your system and verify that Mobile Network option is still here.
5. Then we have to install drivers for your dongle (see the list below for compatible dongles).
Let your TF101 on, connect it to your PC via USB cable and run install-TF101.bat via cmd.exe from Windows (tested under Windows XP x86 and Windows 7 x64)
C. List of COMPATIBLE DONGLES
Note: if your dongle is not in this list, but works with TF101, please tell me. It will be added to the list.
* ZTE MF 639 (might need roaming enabled to get data working)
* Alcatel X225L (thx to urko95)
* Vodafone K3765-H
* Vodafone K3715
* Vodafone K3565 / Huawei E160
* Huawei E156G (thx to sh337 for testing)
* Huawei E160G (thx to htc-hd2. His post)
* Huawei E161 (thx to zumbik. His post)
* Huawei E169
* Huawai E170
* Huawai E171
* Huawei E173 (ATTENTION: E173 EVO version NOT COMPATIBLE - thx to sronweb for his tests - Read more)
* Huawei E180 (thx to ValenteL. His post)
* Huawei E220 (thx to eyz. Connexion seems to be not stable. Read more)
* Huawei E270 (thx to eyz. His post)
* Huawei E1550
* Huawei E1552
* Huawei E1692
* Huawei E1750
* Huawei E1752
* Huawei E1762 (thx to bennyyen. His post)
* Huawei E1820
* Huawei E1823 (Thx to bswpt. His post)
* Huawei E2010 (Thx to madangryscientis. His post)
* HUAWEI K3520
* HUAWEI K3565 -Rev 2
Click to expand...
Click to collapse
D. About LED on HUAWEI 3G Dongle:[/B]
The LED indicator displays the current connection status of your Orange E1752 dongle, with each colour representing a different status:
When the LED displays green and is blinking twice every three seconds, this means that the dongle is powered on.
When the LED displays green and is blinking once every three seconds, this means that the dongle is attempting to register onto a 2G network.
When the LED displays blue and is blinking once every three seconds, this means that the dongle is attempting to register onto a 3G network.
When the LED displays solid green, this means that the dongle is connected onto a 2G network.
When the LED displays solid blue, this means that the dongle is connected onto a 3G network.
When the LED displays solid cyan, this means that the dongle is connected onto a 3G+ network
When the LED displays no colour, this means that the dongle is removed.
Click to expand...
Click to collapse
And dont forget to turn off the composite device of the 3G dongle.
Here how to do (thanks to Matchstick from Modaco who wrote these lines):
You can test this by plugging the stick into a PC and seeing if it detects the modem as a CD or Memory stick device as well as a modem.
If it does then the method I used to turn off the composite device (on Windows 7) was:
1) Install the software and drivers for the modem under windows and make sure that the connection software sees the modem correctly.
2) Go to Settings/Control Panel/Device Manager and if you expand the Modems section you should see your USB modem listed there
3) Double click on the entry for the modem to get the properties panel up and selected the Modem tab
4) You should see a line at the very top of the tab that says something like Port: COM11 - This is the virtual serial port that the PC uses to talk to the modem which we're going to use to send the command to turn off all the stuff we don't want.
5) Next we want to install a serial console application. PuTTY is perfect for this. If you don't have a copy you can get if from here,
http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html
6) Run putty, select Serial under Connection Typem and enter the port we found in step 4 (eg COM11) into the box marked Serial Line and press the Open button
7) An empty window should pop up, which if things are working correctly is connected to the Modem
8) Type "ATI" into the window (without the quotes) and press return. The ATI command asks the modem for basic information and it should respond with something like
Manufacturer: huawei
Model: E1752
Revision: 11.126.03.01.314
IMEI: 123456789012345
+GCAP: +CGSM,+DS,+ES
OK
9) If you see this then you are connected correctly, if you don't see a response try physicaly unplugging and reconnecting the modem into a different USB port and start again from step 2 after windows has loaded the drivers for the modem.
10) Assuming everything is OK, the we can send the command to turn off the stuff we don't want. To do this simply type "AT^U2DIAG=0" (again without quotes) into the putty window. you should see the response OK.
11) If you do then the composite device features should now be turned off and you are ready to try the modem in your transformer.
Click to expand...
Click to collapse
Remerciements/Thanks to AndroidRoot.mobi for NVFlash, Paul for Prime!, Maxh2003 for his script and help, Matchstick for his help, Dexter_nlb for his A500 patch and, of course, all our developers and users who help us.
Not sure why I've flashed several roms in APX from w7 64 bit just fine.
It seems that these drivers don't work for win7 64 and works for Vista 64.
Perhaps they are unsigned.... didn't know. I don't make more tests.
Regards.
Looking good. Now to get a 3G plan and dongle...
Anyone get this working?
to kasimodo
Could you upload Maxh2003's scrift file here. I can't download it from your link.
Thanks
nsec said:
to kasimodo
Could you upload Maxh2003's scrift file here. I can't download it from your link.
Thanks
Click to expand...
Click to collapse
Here the file.
Regards
insmod is having no luck with these kernel modules, none are loaded, and I get nothing??? what's the deal? has anyone got this working including the OP or is this just a theoretical WIP
dan-htc-touch said:
insmod is having no luck with these kernel modules, none are loaded, and I get nothing??? what's the deal? has anyone got this working including the OP or is this just a theoretical WIP
Click to expand...
Click to collapse
Hello it's not a theoretical WIP.
Look here
Can you give more details please?
Regards,
oh... I guess insmod won't work on the modules without a compatible modem plugged in then?
many thanks! got it to work on my E1750
although you might want to put the instruction steps to remove the storage on the modem (only works after I did it):
Insert modem into pc and wait for driver to install
check in device manager which com port is assignated to your modem
download putty
here the.earth.li/~sgtatham/putty/latest/x86/putty.exe
close every program related to modem
run putty
click serial below port number and then change port number to one previously founded
click open
write atz and press enter, modem should answer ok
write ati and press enter, modem should give name, type, etc
write AT^U2DIAG=0 and press enter, zero cd is now disabled
dan-htc-touch said:
oh... I guess insmod won't work on the modules without a compatible modem plugged in then?
Click to expand...
Click to collapse
Probably. is you 3G Dongle in the "compatibility list".
If yes, you have to turn off the composite device of the 3G dongle.
Here how to do (thanks to Matchstick from Modaco):
Code:
You can test this by plugging the stick into a PC and seeing if it detects the modem as a CD or Memory stick device as well as a modem.
If it does then the method I used to turn off the composite device (on Windows 7) was:
1) Install the software and drivers for the modem under windows and make sure that the connection software sees the modem correctly.
2) Go to Settings/Control Panel/Device Manager and if you expand the Modems section you should see your USB modem listed there
3) Double click on the entry for the modem to get the properties panel up and selected the Modem tab
4) You should see a line at the very top of the tab that says something like Port: COM11 - This is the virtual serial port that the PC uses to talk to the modem which we're going to use to send the command to turn off all the stuff we don't want.
5) Next we want to install a serial console application. PuTTY is perfect for this. If you don't have a copy you can get if from here,
http://www.chiark.greenend.org.uk/~sgtatha...y/download.html
6) Run putty, select Serial under Connection Typem and enter the port we found in step 4 (eg COM11) into the box marked Serial Line and press the Open button
7) An empty window should pop up, which if things are working correctly is connected to the Modem
8) Type "ATI" into the window (without the quotes) and press return. The ATI command asks the modem for basic information and it should respond with something like
Manufacturer: huawei
Model: E1752
Revision: 11.126.03.01.314
IMEI: 123456789012345
+GCAP: +CGSM,+DS,+ES
OK
9) If you see this then you are connected correctly, if you don't see a response try physicaly unplugging and reconnecting the modem into a different USB port and start again from step 2 after windows has loaded the drivers for the modem.
10) Assuming everything is OK, the we can send the command to turn off the stuff we don't want. To do this simply type "AT^U2DIAG=0" (again without quotes) into the putty window. you should see the response OK.
11) If you do then the composite device features should now be turned off and you are ready to try the modem in your transformer.
Regards
brensim said:
many thanks! got it to work on my E1750
although you might want to put the instruction steps to remove the storage on the modem (only works after I did it):
Insert modem into pc and wait for driver to install
check in device manager which com port is assignated to your modem
download putty
here the.earth.li/~sgtatham/putty/latest/x86/putty.exe
close every program related to modem
run putty
click serial below port number and then change port number to one previously founded
click open
write atz and press enter, modem should answer ok
write ati and press enter, modem should give name, type, etc
write AT^U2DIAG=0 and press enter, zero cd is now disabled
Click to expand...
Click to collapse
What kind of OTG adapter are you using for this?
Hi all,
will this work with the Huawei E173u2 , the second version adapted for (pseudo)"4G" networks
I am with stock 3.1 + root.
Does it work or I need to install PRIME anyway?
At the moment, everyone who has got this to work has had to install Prime 1.5 (and several of us had to install the NVFlash specific version of Prime)
acid12 said:
Hi all,
will this work with the Huawei E173u2 , the second version adapted for (pseudo)"4G" networks
Click to expand...
Click to collapse
Is this similar to the huawei E367 ? As I'm looking at the E367 at the moment.
One easy(ish) way to check is to follow Steps 1-8 from post 12, then enter the command "AT^GETPORTMODE" (without the quotes)
If you get a response like
"^getportmode:type:WCDMA:Qualcomm,MDM:0,NDIS:1,DIAG:2,PCUI:3,CDROM:4"
then the E173u2 is using the new interface like the E367 and at the moment I can't get it to work.
It may be that the drivers aren't compatible (I'm not seeing ttyUSB0-ttyUSB2 devices appearing in /dev/) or it may just be that I haven't got the correct interfaces enabled.
There's information on the AT commands for the new-style Huawei modems here
http://www.dd-wrt.com/phpBB2/viewtopic.php?p=618504
Matchstick said:
At the moment, everyone who has got this to work has had to install Prime 1.5 (and several of us had to install the NVFlash specific version of Prime)
Click to expand...
Click to collapse
So i think that it is not only root needed but also something that in PRIME is present and that we can not add to stock rom.....
thanks
chrispazz said:
I am with stock 3.1 + root.
Does it work or I need to install PRIME anyway?
Click to expand...
Click to collapse
you can try by using Settings/Privacy then Reset to factory
Then restart and hen wizard ask you to choose for "3g and wifi" or "wifi only" choose 3g and wifi
Afterward you must see mobile network in settings.
tell us and don't forget to backup your data
Kasimodo said:
you can try by using Settings/Privacy then Reset to factory
Then restart and hen wizard ask you to choose for "3g and wifi" or "wifi only" choose 3g and wifi
Afterward you must see mobile network in settings.
tell us and don't forget to backup your data
Click to expand...
Click to collapse
Ok. I have to wait for my docking to come back from ASUS (RMA) and then I will try.
TY
Hi,
I tried to post it here http://forum.xda-developers.com/showthread.php?t=758755&page=6 but I don't have permissions (looks like not very wise forum restriction). Maybe someone finds this useful so I post it here in General forum.
I think I have to mention I'm on Overcome Hermes edition right now.
I installed Debian Chroot. Then I installed nmap. Works perfectly well
I Installed everything neccessary for metasploit and started it (console). Have not tested yet...
I've also managed to start wireshark:
1. Install vnc-server
2. Re-build & install libpcap (I did it on the device) without HAVE_PACKET_RING option
3. Re-build & install wireshark
4. Start vncserver
5. Start androVNC
6. Connect to localhost
7. Start wireshark ;-)
It works good, but putting device into promiscious mode brakes outgoing traffic while on WiFi connection (after few seconds or minutes). I'm satisfied using it without promiscious mode so far. Very convenient. Have not tested on 3G connection but there is no reason for PROMISC on PTP interface anyway.
Have not tested anything like aircrack because got no monitoring WiFi drivers.
Would be grateful if anyone gives a hint on what is wrong with PROMISC mode there.. (Is it really needed?..)
And it would be cool to have kernel with CONFIG_PACKET_MMAP enabled to avoid libpcap/wireshark rebuilds. I think default Debian libpcap requires this particular kernel option.
--Cheers
This is not my work
the original developer is mzo
I want to share Kali nethunter for kenzo to use it nougat roms
This is an unofficial port of Kali NetHunter for Xiaomi Redmi Note 3.
Official site of kali https://www.kali.org/
A project by Offensive Security
The Kali Linux NetHunter project is the first Open Source Android penetration testing platform, created as a joint effort between the Kali community member “BinkyBear” and Offensive Security. NetHunter supports Wireless 802.11 frame injection, one-click MANA Evil Access Point setups, HID keyboard (Teensy like attacks), as well as BadUSB MITM attacks – and is built upon the sturdy shoulders of the Kali Linux distribution and toolsets.
802.11 Wireless Injection and AP mode support with multiple supported USB wifi cards.
Capable of running USB HID Keyboard attacks, much like the Teensy device is able to do.
Supports BadUSB MITM attacks. Plug in your Nethunter to a victim PC, and have your traffic relayed though it.
Contains a full Kali Linux toolset, with many tools available via a simple menu system.
USB Y-cable support in the Nethunter kernel – use your OTG cable while still charging your Nexus device!
Software Defined Radio support. Use Kali Nethunter with your HackRF to explore the wireless radio space.
Documentation and Attack Descriptions
Attack descriptions as well as some documentation to get you started with the installation and setup of Kali NetHunter can be found at https://github.com/offensive-securit...nethunter/wiki
-Downloads :
-[Kalifs full]: https://www.androidfilehost.com/?fid=745425885120724463
Mirror
https://drive.google.com/file/d/0BzM1YuO3yLiQaGhNRTRwLVVueEk/view?usp=drivesdk
-Instructions :
Flash nethunter-kenzo-marshmallow-kalifs-full.
(Kernel patch included in zip)
this is only for nougat based roms so flash on lineage is based roms
I installed on nitrogen is works good
Reboot
if go in bootloop it is completely normal, wait a few minutes
[email protected] said:
This is not my work
the original developer is mzo
I want to share Kali nethunter for kenzo to use it nougat roms
This is an unofficial port of Kali NetHunter for Xiaomi Redmi Note 3.
Official site of kali https://www.kali.org/
A project by Offensive Security
The Kali Linux NetHunter project is the first Open Source Android penetration testing platform, created as a joint effort between the Kali community member “BinkyBear” and Offensive Security. NetHunter supports Wireless 802.11 frame injection, one-click MANA Evil Access Point setups, HID keyboard (Teensy like attacks), as well as BadUSB MITM attacks – and is built upon the sturdy shoulders of the Kali Linux distribution and toolsets.
802.11 Wireless Injection and AP mode support with multiple supported USB wifi cards.
Capable of running USB HID Keyboard attacks, much like the Teensy device is able to do.
Supports BadUSB MITM attacks. Plug in your Nethunter to a victim PC, and have your traffic relayed though it.
Contains a full Kali Linux toolset, with many tools available via a simple menu system.
USB Y-cable support in the Nethunter kernel – use your OTG cable while still charging your Nexus device!
Software Defined Radio support. Use Kali Nethunter with your HackRF to explore the wireless radio space.
Documentation and Attack Descriptions
Attack descriptions as well as some documentation to get you started with the installation and setup of Kali NetHunter can be found at https://github.com/offensive-securit...nethunter/wiki
-Downloads :
-[Kalifs full]: https://www.androidfilehost.com/?fid=745425885120724463
-Instructions :
Flash nethunter-kenzo-marshmallow-kalifs-full.
(Kernel patch included in zip)
this is only for nougat based roms so flash on lineage is based roms
I installed on nitrogen is works good
Reboot
if go in bootloop it is completely normal, wait a few minutes
Click to expand...
Click to collapse
Can I flash this .zip on omnirom? Is it full working without any issue?
overcustom said:
Can I flash this .zip on omnirom? Is it full working without any issue?
Click to expand...
Click to collapse
Yes but take nandroid backup just in case
Can I flash custom kernels on Nethunter???
Or flash magisk instead of SuperSU that is preinstaled.
Sent from my Redmi Note 3 using XDA Labs
AliGulzar-AF said:
Can I flash custom kernels on Nethunter???
Or flash magisk instead of SuperSU that is preinstaled.
Sent from my Redmi Note 3 using XDA Labs
Click to expand...
Click to collapse
I have tried it works but you will need to complete. It's first boot then open net Hunter. App all good then go to SuperSU click on full unroot then go to recovery forcefully then flash magisk then kernel which you want
Then reboot but I am getting. Cts profile mismatch
Here is video
https://youtu.be/5cAOhdsQuzg
terminal force closing on lineage and xenondhd... any suggestions?
srijansaxena11 said:
terminal force closing on lineage and xenondhd... any suggestions?
Click to expand...
Click to collapse
Not getting FCS check video
srijansaxena11 said:
terminal force closing on lineage and xenondhd... any suggestions?
Click to expand...
Click to collapse
Try uninstalling terminal app and install this one
https://drive.google.com/file/d/0BzM1YuO3yLiQZEJJRXc5aTVGckk/view?usp=drivesdk
please help me, why my fingerprint not work. before flash it, everything was fine..i'm using nitrogen os
BUG
external wifi cards are not working (tp link tl wn722n) , hid are not fully working (duckhunter in particular) ,also got into root problem , if anybody want to try NH use unrooted nirtogen os .very happy with volt feature and many new feature are added
thanks in advance
tongo45 said:
please help me, why my fingerprint not work. before flash it, everything was fine..i'm using nitrogen os
Click to expand...
Click to collapse
Are you goodix fingerprint user
???
abhinavornikkoo said:
external wifi cards are not working (tp link tl wn722n) , hid are not fully working (duckhunter in particular) ,also got into root problem , if anybody want to try NH use unrooted nirtogen os .very happy with volt feature and many new feature are added
thanks in advance
Click to expand...
Click to collapse
First turn off your internal wifif card then restart then after reboot connect to external wifi to mobile then go to wifi settings just turn on wifi your external wifi card will be used
[email protected] said:
Are you goodix fingerprint user
???
First turn off your internal wifif card then restart then after reboot connect to external wifi to mobile then go to wifi settings just turn on wifi your external wifi card will be used
Click to expand...
Click to collapse
Yes,i think. How to see goodix or fpc fingerprint ?
[email protected] said:
I have tried it works but you will need to complete. It's first boot then open net Hunter. App all good then go to SuperSU click on full unroot then go to recovery forcefully then flash magisk then kernel which you want
Then reboot but I am getting. Cts profile mismatch
Here is video
https://youtu.be/5cAOhdsQuzg
Click to expand...
Click to collapse
Cts profile mismatch as you have not enabled magisk hide hi to settings ands enable magisk hide
[email protected] said:
Are you goodix fingerprint user
???
First turn off your internal wifif card then restart then after reboot connect to external wifi to mobile then go to wifi settings just turn on wifi your external wifi card will be used
Click to expand...
Click to collapse
Ohh ic,,so thats how to turn on external wifi..
Cz i was tried this NH b4 n cant detect my external wifi
Gotta try flash this again on my Nitrogen os..hope it work..
Will give report on this l8r..btw nice work
replay
[email protected] said:
Are you goodix fingerprint user
???
First turn off your internal wifif card then restart then after reboot connect to external wifi to mobile then go to wifi settings just turn on wifi your external wifi card will be used
Click to expand...
Click to collapse
still not working ! i have tried , every thing looks good except external wifi card problem, hope u can help us with patch,
will it work on ressurection remix ??
and if it will plz tell me about the bugs and installation procedure !
Thank you
Hey can some tell me how to install fluxion on NH,
I have tied by terminal as well as on vnc server , when I type ./Installer.sh then it gives bash ./installer.sh permission denied then I tied chmod +x .. Plz plz help me
Still not working for external wifi card,i'm using wn722n too
Can that file worked redmi note 4?
[email protected] said:
Are you goodix fingerprint user
???
First turn off your internal wifif card then restart then after reboot connect to external wifi to mobile then go to wifi settings just turn on wifi your external wifi card will be used
Click to expand...
Click to collapse
I was trying this n still doesnt work for me..im assuming this is kernel problem..no kernel support nethunter so no external wifi detected..
So far i only known there is one rom working for nethunter..thats cm 13 with builth in nethunter kernel..but wifite doesnt work..
I hope there some1 can make nethunter kernel fully working for ours device
First time posting, but I've read through dozens of threads and have used the site extensively. I cannot seem to find an answer to the issue I'm having. I had an old Galaxy Note 4 lying around and wanted to see if I could install NetHunter. After tons of trial and error, I was successful in flashing LineageOS 15.1, addonsu -15.1 arm, nethunter-generic-armhf-kalifs-full-rolling-2017.10-20171013-0449, and kernel-nethunter-generic-armhf-3.15.4-20170211-0304 (too new to post link of the NH builds). I have full chroot, updated busybox (v1.25-0-NetHunter) and SuperuserSU to manage root privileges. I had to install all of the tools (e.g., cspolit, DriveDroid, OpenVPN, etc.) individually, but they seem to be in working order.
My issue: I bought an external wifi adapter (Alfa AWUS036NEH) with a chipset (Ralink Technology Wifi Adapter RT2780) that supports monitor mode. The Wifi card appears to work flawlessly on my macbook with Kali distro, but I can't seem to find a way for the NH kernel on the Note 4 to recognize the adapter. In the kernel I flashed, I can see the rt2870.bin firmware required in the /system/etc/firmware folder, but for some reason Nethunter does not recognize the adapter. On most Nexus/NH builds, the wifi adapter is found to be compatible and is usually plug and play.
When I run:
-Kali terminal
-ifconfig
There is no wlan1. Only wlan0.
Same thing if I run iwconfig.
When I run:
-kali terminal
-airmon-ng
I receive a prompt that states:
Found phy0 with no interface assigned, would you like to assign one to it [y/n]?
-y
ERROR adding monitor mode interface: command failed: Operation not supported (-95)
No surprise, the above is indicating the embedded chipset does not support a monitor mode interface, but it doesn't even list the external adapter.
when I run: lsusb
Output shows the Ralink wifi adapter on bus 3:2.
I understand NetHunter was not built for LineageOS 15.1, but there has to be some way to maybe push the firmware or modify the firmware (I have the original firmware from the manufacture) to be compatible with my current build? Do I need to compile my own Kernel for this to work properly? Why doesn't the generic NH kernel, with the rt2870.bin file work?
Thanks ahead of time.
Have you tried using Magisk and flashing the Kali Nethunter module with that? It also includes multiple wireless firmware and I believe the correct one for your Alfa dongle. I too just bought that exact WIFI dongle and I'm still in the process of setting up Kali on my Note 4.
I had a similar issue as you on my OnePlus 5T even with the Magisk module for Nethunter. I'm going to try and find a different kernel because I think that's my issue on that phone.
My Note 4 is N910P but I'll let you know if I find something that works and maybe it'll help you find a way on your variant.
hello good night, good afternoon, good morning everyone here !,
recently bought a mi 9t eea with miui 12.0.3, follow the instructions provided by re4son on this link (https://forums.kali.org/showthread.php?48755-Xiaomi-Redmi-k20-MI-9t-Hid -interface & p = 94518 # post94518), apparently the installation worked perfectly, I connected my tplink 722n v1 atheros and it was detected more after giving the command airmon-ng start wlan2 was successful!, following the command airodump-ng wlan2mon was more than which resulted in an error, then the same airmon-ng start wlan2 command started to result in an error! , restarted the device, again the command airmon-ng board detected following command airmon-ng start wlan2 error and more error, tested in miui 11.0.4,11.0.5,11.0.6 and nothing to work on the external board.
information:
miui 12.0.3
magisk v24
Universal DM-Verity, ForceEncrypt 4/3/2020
nethunte filed 2020.3, 2020.4, I haven't tested version 2020.2 because it is no longer available if someone has the link to that version send me!
I need a solution, to work the external wi-fi adapter.
hello I'm having the same problem a little bit like yours, in my case I was able to detect more does not put the external card in monitor mode, I'm also looking for links from kali nethunter 2020.2.