I cannot bypass google account verification neither able to root it
My phone is unrooted and have no TWRP installed on it
I connected my USB stick via an OTG connector but my phone did not see it
Booting menu has no option to boot into the USB stick connected via OTG and the phone does not have a slot to insert an SD card to root and flash TWRP
I cannot use ADB via my computer because I cannot access the settings on my device to enable USB debugging even though I downloaded latest Samsung USB device driver on different computers but Odin does not show up my phone
My computers show my phone connected as Unknown USB device (device descriptor request failed) under Universal Serial Bus Controller in Device Manager
I can only connect to WI-FI and keep clicking next until I reach the screen where I have to insert google account to setup the phone but I do not have the google account used before in order to complete the setup
Is there a way to have my phone bypass google account verification or root it and install TWRP on it
Thanks
Related
Hey, I'm trying to root my AT&T GS4 and obviously need usb debugging to do it, but whenever I connect the chord to my computer it says it's still "Connected as a media device" in the notification bar.
Yes I have:
1) Enabled developer mode
2) Downloaded and installed the usb driver from Samsung (however I'm not sure it went correctly, will explain farther down) also have successfully connected phone with Kies and backed it up.
3) Tap the checkbox to enable usb debugging
The same process I took when rooting my Nexus 7. Only this time usb debugging isn't actually turned on or isn't being detected.
The reason I said I think something went wrong with the install of the drivers is because after I ran the .exe I got off of Samsung's support site it did that icon for driver installation, I opened it and after a while it showed this (replace DOT with . because of XDA's anti-spam thing): i.imgurDOTcom/M6pewok.png
As it shows there were multiple drivers that were installed, but one unidentified device that failed.
I'm really wanting to root my phone but need usb debugging, can anyone help?
re: USB Debugging -Root
T4yB4cK said:
Hey, I'm trying to root my AT&T GS4 and obviously need usb debugging to do it, but whenever I connect the chord to my computer it says it's still "Connected as a media device" in the notification bar.
Yes I have:
1) Enabled developer mode
2) Downloaded and installed the usb driver from Samsung (however I'm not sure it went correctly, will explain farther down) also have successfully connected phone with Kies and backed it up.
3) Tap the checkbox to enable usb debugging
The same process I took when rooting my Nexus 7. Only this time usb debugging isn't actually turned on or isn't being detected.
The reason I said I think something went wrong with the install of the drivers is because after I ran the .exe I got off of Samsung's support site it did that icon for driver installation, I opened it and after a while it showed this (replace DOT with . because of XDA's anti-spam thing): i.imgurDOTcom/M6pewok.png
As it shows there were multiple drivers that were installed, but one unidentified device that failed.
I'm really wanting to root my phone but need usb debugging, can anyone help?
Click to expand...
Click to collapse
If it says "Connected as a media device" that is NORMAL and the way it should be.
If you have check marked "USB Debugging" in your phone settings and the checkbox remains "checked"
then there is nothing wrong with your phone. If the USB debugging does not stay "check marked" after
you "check mark" it then there is something wrong with your phone.
Most likely there is NOTHING wrong with the phone itself and the rooting issue you are having has
nothing to do with usb debugging.
If that's the case then your problem most likely is the usb drivers in your computer or the usb cable
itself and possibly you need to plug the cable into a different usb port on your computer.
First thing I would do if this is the case is to un-install all samsung drivers and applications
from your computer including kies if it's installed. Then reboot the computer and only install
the Samsung USB Drivers and nothing else.
After the samsung usb drivers are installed reboot your computer.
Then you should be able to root the phone with no problem.
The very best and easiest way to root your phone is to download either the cwm or twrp
recovery Odin flash TAR file and download ODIN if you don't already have it.
After doing that download one of the cwm/twrp flashable custom rom zips file and copy it to
your internal sdcard.
Then use Odin to flash the TAR recovery file in the PDA slot of Odin.
After that's done reboot into recovery and select "install" or "install zip" and navigate to your
internal sdcard and find the cwm/twrp flashable custom rom which you copied to the sdcard
and flash it.
After it's flashed you will be rooted, all the cwm/twrp flashable custom roms are pre-rooted
so you will not need to worry about having to root.
Good luck!
I am trying to connect my Note 3 to my computer and it will not mount as a device that is visible under windows. It was taken for service and when it came back it only connects to the PC as an ADB device, but not MTP when it is fully booted. I can flash firmware while in Odin, I can connect in bootloader mode, I just can not make it visible to transfer files from the computer directly to the phone via cable. Under device manager it says 'SAMSUNG Android ADB Interface'. USB debugging changes nothing either. My S3 shows ADB and MTP but the Note does not. I have attempted with multiple cables on 2 computers and get the same result. If anyone has a suggestion of a way to fix this without having to wipe again, I'd love to hear it. Thanks in advance.
I just got the 6P on Amazon, used-like new. It has 6.0.1 with TWRP installed. When I plug in the short USB-C cable into my W10 PC, it doesn't detect anything. So I go enable debugging mode, turn on USB-Debugging and go down to "Select USB Configuration" and it is set to Charging. The problem is that it won't let me select any other modes other than Charging. It does charge when it is plugged in so the cable is working in some aspect. W10 device manager doesn't show any new USB device or unknown devices when plugged in.
So I reboot into Bootloader and Windows still doesn't detect any device. I tried all the other USB ports. So I'm not quite sure how to get this device to connect to the computer or to just get it to factory stock.
And in TWRP, the log shows MTP enabled and Windows still doesn't recognize it.
Hello! First, sorry for my bad english. In December after I install Android Nougat with Odin my pc doesn't recognized my phone. I tried different method but no one resolve my problem. I tried to :
1. Install drivers manually
2. Activate USB debugging from developers option
3. Connect my phone to different PC (Win 7/8/10 and Mac)
4. Factory reset
5. Change cable.
At device mannager appear Unknown USB Device and I install Samsung drivers manually.
My phone is not rooted.
PLEASE HELP ME!
does your phone charge when the cable is plugged into your computer ?
Prior to upgrade what type of connection did you have MTP or something else ?
My phone is charging when i plug in computer and is selected mtp connection .
Hello to everyone.New to this forum.
So here is my issue.
I have S6 Edge+ and yesterday it got stuck o samsung logo. I was able to factory reset it , wipe all data , cache etc. After that the phone booted and tried to set it again as new. But now its asking me to verify my google account that i used before and i do not remember it.
I tried flashing different firmware , realterm and a lot other solutions but nothing worked.
Is it just useless now ? any other solutions ?
AmixS6 said:
Hello to everyone.New to this forum.
So here is my issue.
I have S6 Edge+ and yesterday it got stuck o samsung logo. I was able to factory reset it , wipe all data , cache etc. After that the phone booted and tried to set it again as new. But now its asking me to verify my google account that i used before and i do not remember it.
I tried flashing different firmware , realterm and a lot other solutions but nothing worked.
Is it just useless now ? any other solutions ?
Click to expand...
Click to collapse
You have to use combination firmware, I will PM you.
El Solido said:
You have to use combination firmware, I will PM you.
Click to expand...
Click to collapse
Can you pm me too Im having trouble finding these
sdizzle31 said:
Can you pm me too Im having trouble finding these
Click to expand...
Click to collapse
He just sends a link which gives you the files . But those files are not the latest so it will not work on your phone (in case you have same firmware as me) .
If your phone is Binary 4 and lower then it will work.
Help
I can’t find a combination file for the Samsung 6edge plus, it’s Sm-g928Vvru3cqg1
I cannot bypass google account verification neither able to root it
My phone is unrooted and have no TWRP installed on it
I connected my USB stick via an OTG connector but my phone did not see it
Booting menu has no option to boot into the USB stick connected via OTG and the phone does not have a slot to insert an SD card to root and flash TWRP
I cannot use ADB via my computer because I cannot access the settings on my phone to enable USB debugging even though I downloaded latest Samsung USB device driver on different computers but Odin does not show up my phone
My computers show my phone connected as Unknown USB device (device descriptor request failed) under Universal Serial Bus Controller in Device Manager
I can only connect to WI-FI and keep clicking next until I reach the screen where I have to insert google account to setup the phone but I do not have the google account used before in order to complete the setup
Is there a way to have my phone bypass google account verification or root it and install TWRP on it then flash custom ROM
mahair1970 said:
I cannot bypass google account verification neither able to root it
My phone is unrooted and have no TWRP installed on it
I connected my USB stick via an OTG connector but my phone did not see it
Booting menu has no option to boot into the USB stick connected via OTG and the phone does not have a slot to insert an SD card to root and flash TWRP
I cannot use ADB via my computer because I cannot access the settings on my phone to enable USB debugging even though I downloaded latest Samsung USB device driver on different computers but Odin does not show up my phone
My computers show my phone connected as Unknown USB device (device descriptor request failed) under Universal Serial Bus Controller in Device Manager
I can only connect to WI-FI and keep clicking next until I reach the screen where I have to insert google account to setup the phone but I do not have the google account used before in order to complete the setup
Is there a way to have my phone bypass google account verification or root it and install TWRP on it then flash custom ROM
Click to expand...
Click to collapse
What model number is ur s6edge+? I might have the combo files u need for odin.
itrustno1 said:
What model number is ur s6edge+? I might have the combo files u need for odin.
Click to expand...
Click to collapse
The model number is SM-G928C
Here is the Samsung link for its information
https://www.samsung.com/ae/support/model/SM-G928CZDEKSA/