I was trying to reflash back to stock and guess I've flash the firmware of an wrong model or something.
Now it shows me only a black screen after the Samsung logo. I can boot into recovery however there is no display (I can see the MTP enabled on my computer).
Also, I've tried to reflash other versions from my own region, Odin mode refuses to flash them.
Odin mode reads:
Code:
PRODUCT NAME: SM-J730G
Current Binary: Custom (0xd)
FRP LOCK: OFF
OEM LOCK: OFF
Secure Download: Enabled
WARRANTY VOID (0x030c)
RP SWREV B:-1 K:3 S:4
Trying to flash from J730GUBSACTC5 J730GZTOACTC1:
Code:
SW REV. CHECK FAIL(BOOTLOADER) DEVICE: -1, BINARY: 10
Which bootloader is compatible with binary -1 anyway? Please help.
I have the same, any update?
Piotr020798 said:
I have the same, any update?
Click to expand...
Click to collapse
Nope, my screen is fake/replacement and samsung's bootloader cannot be downgraded. What a load of bull.
I'm guessing 0xc or 0xd is the bootloader version so I'll try finding a firmware that has this. If this is a screen problem then this device is p much toast since I'll not be replacing it again.
Related
Argh...
I started with a rooted S4 SGH-I337 running 4.3. Was eating batteries with AT&T's OTA push failing every day so I decided to flash a new 4.2.2 ROM using "For MK2 Base Users (never took NB1 OTA)" instructions Here. After the reboot, the "Samsung Custom" splash stayed on for an hour until I rebooted manually. Now it remains stuck in the splash screen unless I boot into download mode.
I've tried flashing a new ROM and partition using these instructions and (I337MK2_Full_Odin_Tar.tar.md5) / (SGS-I337_16GB.pit) but have not seen any difference. Here is where I'm sitting now.
Kies doesn't see the phone at all.
Download screen:
Code:
ODIN MODE
PRODUCT NAME: SGH-1337
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
KNOX KERNAL LOCK: 0x0
KNOX WARRANTY VOID: 0x0
CSC-CONFIG-LSB: 0x30
WRITE PROTECTION: Enable
eMMC BURST MODE Enabled
After flashing, Download screen says:
Code:
Start (224, 1440)
SW REV. CHECK FAIL : Fused : 5, Binary : 4
and Odin says:
Code:
FAIL! (Auth)
Now it goes to a triangle/Oden download screen generally without going to the Samsung splash.
I've spent days reading threads and haven't found anything that seems helpful at this point. Does anyone have any helpful suggestions or links to a thread that may help?
Green Wenonah said:
Argh...
I started with a rooted S4 SGH-I337 running 4.3. Was eating batteries with AT&T's OTA push failing every day so I decided to flash a new 4.2.2 ROM using "For MK2 Base Users (never took NB1 OTA)" instructions Here. After the reboot, the "Samsung Custom" splash stayed on for an hour until I rebooted manually. Now it remains stuck in the splash screen unless I boot into download mode.
I've tried flashing a new ROM and partition using these instructions and (I337MK2_Full_Odin_Tar.tar.md5) / (SGS-I337_16GB.pit) but have not seen any difference. Here is where I'm sitting now.
Kies doesn't see the phone at all.
Download screen:
Code:
ODIN MODE
PRODUCT NAME: SGH-1337
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
KNOX KERNAL LOCK: 0x0
KNOX WARRANTY VOID: 0x0
CSC-CONFIG-LSB: 0x30
WRITE PROTECTION: Enable
eMMC BURST MODE Enabled
After flashing, Download screen says:
Code:
Start (224, 1440)
SW REV. CHECK FAIL : Fused : 5, Binary : 4
and Odin says:
Code:
FAIL! (Auth)
Now it goes to a triangle/Oden download screen generally without going to the Samsung splash.
I've spent days reading threads and haven't found anything that seems helpful at this point. Does anyone have any helpful suggestions or links to a thread that may help?
Click to expand...
Click to collapse
Code:
Start (224, 1440)
SW REV. CHECK FAIL : Fused : 5, Binary : 4
If you are seeing this while flashing MK2, then you have a NB1 bootloader.
jmjoyas said:
If you are seeing this while flashing MK2, then you have a NB1 bootloader.
Click to expand...
Click to collapse
Holy Awsome Sauce Batman. With that little bit of information, I downloaded the rooted stock ROM and it worked like a charm. Thanks...
Fantastic! 1 piece of info and bingo! cost me hours to find it. Huge thanks!
Hello guys, ever since I bought my phone I sometimes have this error "sbl1 partition doesn't exist" pressing power button for 7 seconds reboots and fixes it, but problem is, I'm about to sell the phone and the owner might think I'm cheating him if it ever happens to him, so does anyone have an idea of how to fix this?
Full error:
boot recovery mode
check boot partitions. .
sbl1 partition doesn't exist
odin mode
product name: sm-g900f
current binary: custom
sytem status: custom
reactivation lock(kk): off
knox warranty void: 0x1 (0)
qualcomm secureboot: enable (csb)
rp swrev:**s1,**t1,**r1,**a1,**p1
secure download :**enable
udc start
Flash a stock ROM with ODIN
Latest G900F (United Kingdom) Lollipop ROM
Code:
https://mega.nz/#!fVhhzRBC!A79uC8Fgg1mGCZOaujQCzBxcUUN9z_ctVVkigD8ffVM
Power+Home+Volume down shows :
Odin Mode
Product Name: SM-N910F
Current Binary: Custom
System Status: Custom
Reactivation Lock: off
Knox Waranty VOID : 0x1(4)
Qualcomm Secureboot: Enable (CSB)
Power+Home+Volume up NO MENU
I tried to update my device with kies
- bootloop recovery booting
I tried to update my device with Odin
- N910FXXS1CPC5_N910FDTM1COI1_N910FXXS1COK1_HOME.tar
- bootloop recovery booting
What can I do ?
Hi all,
I have tried almost everything to bypass my old device.
I have used Odin with TWRP, and it says its FRP locked.
As soon as the screen comes on(no matter what key combo I press) this is what I see:
ODIN MODE (MULTI CORE DOWNLOAD)
PRODUCT NAME: SM-G361F
CURRENT BINARY:Samsung Official
SYSTEM STATUS: Official
FRP LOCK: ON
KNOX WARRANTY VOID: 0x0
Secure Download : Enabled
RP SWREV: S1, L1, M1
Underneath there is a message: Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again.
I have tried Kies (all versions), I have used the .tar files in odin on the AP tab but I get a prompt that it's FRP locked (in green text) along with the message above. I cant get into the download modeof the phone. Is there any way around this? Probably not but worth a shot in the dark.
Appreciate it if you can find a solution.
jeff8585 said:
Hi all,
I have tried almost everything to bypass my old device.
I have used Odin with TWRP, and it says its FRP locked.
As soon as the screen comes on(no matter what key combo I press) this is what I see:
ODIN MODE (MULTI CORE DOWNLOAD)
PRODUCT NAME: SM-G361F
CURRENT BINARY:Samsung Official
SYSTEM STATUS: Official
FRP LOCK: ON
KNOX WARRANTY VOID: 0x0
Secure Download : Enabled
RP SWREV: S1, L1, M1
Underneath there is a message: Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again.
I have tried Kies (all versions), I have used the .tar files in odin on the AP tab but I get a prompt that it's FRP locked (in green text) along with the message above. I cant get into the download modeof the phone. Is there any way around this? Probably not but worth a shot in the dark.
Appreciate it if you can find a solution.
Click to expand...
Click to collapse
SAME. Did you fix it somehow?
Hello, i got an S7 Edge.
Its FRP locked and on Android 8.0.
What do i have to do? Downgrade to ? 7 / 6 to unlock it with the Bluethooth Method?
And what Bootloader do i have? is it too high to downgrade?
Which Rom should i flash?
ODIN MODE
Download SPEED: FAST
PRODUCT NAME : SM-G935F
CURRENT BINARY : Samsung Official
SYSTEM STATUS: Official
FRP LOCK : ON
Secure Download : Enabled
Warranty VOID: 0 (0x0000)
AP SWREV: B:3 K:1 S:2
Android Recovery says:
samsung/hero2ltexx/hero2lte
8.0.0/R16NW/G935FXXS3ERHD
thanks a lot
greets from germany
download original rom and flash with ODIN
i used this rom yesterday happen with me also
BTU-G930FXXU2ERD5-20180502100231
its only for G930F
AlbertXDA069 said:
Hello, i got an S7 Edge.
Its FRP locked and on Android 8.0.
What do i have to do? Downgrade to ? 7 / 6 to unlock it with the Bluethooth Method?
And what Bootloader do i have? is it too high to downgrade?
Which Rom should i flash?
ODIN MODE
Download SPEED: FAST
PRODUCT NAME : SM-G935F
CURRENT BINARY : Samsung Official
SYSTEM STATUS: Official
FRP LOCK : ON
Secure Download : Enabled
Warranty VOID: 0 (0x0000)
AP SWREV: B:3 K:1 S:2
Android Recovery says:
samsung/hero2ltexx/hero2lte
8.0.0/R16NW/G935FXXS3ERHD
thanks a lot
greets from germany
Click to expand...
Click to collapse
Downgrade Binary 3 is not possible
AP SWREV: B:3 K:1 S:2 (B:3 is your binary)
Yo can try using combination file metod for dissable OEM Lock
Google FRP is pretty tough. It uses a different partition for storing lock status. so flashing DATA partition (Factory reset, Wiping, etc) wont work. Also flashing system partition (flashing a new rom into system partition, Updating rom, etc) wont work. This tool may worth checking out.
FRP bypass apk
eriktirador said:
Downgrade Binary 3 is not possible
AP SWREV: B:3 K:1 S:2 (B:3 is your binary)
Yo can try using combination file metod for dissable OEM Lock
Click to expand...
Click to collapse
Thank you, could you send me a Link for the right Combination file?
thanks
AlbertXDA069 said:
Thank you, could you send me a Link for the right Combination file?
thanks
Click to expand...
Click to collapse
https://forum.xda-developers.com/s7-edge/help/file-combination-firmware-binary-3-t3853926
Flash it in AP via Odin
eriktirador said:
https://forum.xda-developers.com/s7-edge/help/file-combination-firmware-binary-3-t3853926
Flash it in AP via Odin
Click to expand...
Click to collapse
Thank you very much, ill try it later when i get home from work:fingers-crossed:
https://forum.xda-developers.com/s7-edge/how-to/how-to-remove-frp-lock-guide-t3855793 I MADE THIS GUIDE